EMC DATA DOMAIN DD600 SERIES Deduplication storage for backup and archive at midsized data centers nEXT-GEnERATiOn BACKUP, RECOVERY, AnD ARCHiVinG ESSEnTiAlS ® ® EMC Data Domain deduplication storage systems continue to revolutionize disk backup, Scalable Deduplication Storage archiving, and disaster recovery with high-speed, inline deduplication. By consolidating • Fast, inline deduplication with up to 1.2 backup and archive data on a Data Domain system, storage requirements can be reduced in TB/hour of single stream throughput size by 10 to 30 times, making disk cost-effective for onsite retention, and highly efficient for • Up to 5.4 TB/hour of aggregate throughput network-based replication to disaster recovery sites. • Provides up to 2.7 PBs logical storage for long-term backup retention SCAlABlE DEDUPliCATiOn STORAGE • 10 to 30 times average reduction in All Data Domain systems derive their performance advantages from the EMC Data Domain backup storage required ™ Stream-Informed Segment Layout (SISL ) scaling architecture. This CPU-centric approach minimizes the number of disk spindles required to achieve the throughput performance Easy Integration needed for critical single-stream operations. Data Domain systems save significant physical • Supports leading backup and archive applications storage capacity by substituting small references for each identical redundant sequence, enabling cost-efficient retention on disk for fast, reliable recoveries. • Supports leading enterprise applications for database, email, content manage- ment, and virtual environments EASY inTEGRATiOn • Simultaneous use of EMC Data Domain The Data Domain DD600 Appliance series is qualified with leading enterprise backup and Boost, VTL, CIFS, NFS, and NDMP archiving applications and easily integrates into the existing storage infrastructure, requiring Multisite Disaster Recovery no changes to data center infrastructure or distributed office backup and archiving policies. • 99 percent bandwidth efficiency for These systems support simultaneous data access methods through NFS and CIFS file service network based replication protocols over Ethernet, or as an intelligent disk-based target using application-specific • Flexible replication topologies for tape free interfaces such as EMC Data Domain Boost. DD Boost enables advanced integration for use DR or tape consolidation with EMC Avamar, EMC NetWorker, EMC Greenplum, Oracle RMAN, Quest vRanger, and • Replication from up to 90 remote sites Symantec OpenStorage. Users can leverage the same DD600 series system for both backup and archive workloads. This improves the efficiency across backup and archive applications, • Encrypted replication and reduces management overhead by combining storage from multiple applications onto a Ultra-Safe Storage for Reliable Recovery single, easy-to-manage system. • Inline write/read verification, continuous fault detection and healing MUlTiSiTE DiSASTER RECOVERY • Dual disk parity RAID 6 EMC Data Domain Replicator software enables network-efficient and encrypted replication to Operational Simplicity a remote site for disaster recovery, remote office data protection, or multisite tape • Power, cooling, and space efficiencies for consolidation. The DD670 supports replication fan-in from Data Domain systems installed at green operation up to 90 remote offices. Cross-site deduplication minimizes the required bandwidth between • Deploy both backup and archive all sites, since only the first instance of data is transferred across any of the WAN segments. applications on a single system Datasets are effectively shrunk by 99 percent, to a size where network-efficient replication is Encryption and Secure Data Retention fast and reliable. If confidentiality is required, deduplicated and compressed data can be encrypted in-flight when being replicated between Data Domain systems, independent of • Inline encryption for data-at-rest the replication topology used. • Meets IT governance and regulatory compliance standards for archive data D A T A S H E E T UlTRA-SAFE STORAGE FOR REliABlE RECOVERY The EMC Data Domain Data Invulnerability Architecture provides the industry’s best defense against data integrity issues. Inline write and read verification protects against, and automatically recovers from, data integrity issues during data ingest and retrieval. Capturing and correcting I/O errors inline during the backup process eliminates the need to repeat backup jobs, ensuring backups complete on time and satisfy service-level agreements. Continuous fault detection and self-healing features protect data throughout the data lifecycle for all Data Domain systems. OPERATiOnAl SiMPliCiTY EMC Data Domain systems are simple to install and manage. To get started, simply connect an appliance to your backup server as either a file server via Ethernet or as a virtual tape library (VTL) via Fibre Channel. EMC Data Domain Boost is also supported; all three interfaces can be used simultaneously. EnCRYPTiOn AnD SECURE DATA RETEnTiOn FOR BUSi- nESS-CRiTiCAl DATA The proliferation of publicized data loss, coupled with new governance and compliance regulations, is driving the need for customers to encrypt their data-at-rest. EMC Data Domain Encryption software option provides organizations with enhanced security for data that ® resides on their Data Domain systems using industry-standard RSA BSAFE FIPS 140-2 validated cryptographic libraries. Centralized encryption key lifecycle management is optionally available with the RSA Data Protection Manager to deliver a robust, encryption key lifecycle management solution for the entire enterprise. As aged and old data is archived, IT organizations can use the EMC Data Domain Retention Lock software option to meet the secure data retention and immutability requirements for their archive data. DD Retention Lock Governance edition helps administrators meet corporate governance policies for data retention by allowing adjustment of retention parameters to support changing business policies. For the most demanding restrictions from regulatory standards for data integrity and retention, DD Retention Lock Compliance edition provides SEC17a-4f compliance and ensures that all file and email archive data in a locked state cannot be deleted or overwritten under any circumstances. SPECiFiCATiOnS DD600 Series Specifications DD620 DD640 DD670 1,3 4 4 Logical Capacity, Standard 83 TB 0.32 PB 0.6 PB 2,3 4 4 Logical Capacity, Redundant 415 TB 1.6 PB 2.7 PB 8 9 5 Maximum Throughput (Other) 1.1 TB/hr 2.3 TB/hr 3.6 TB/hr 6 6 Maximum Throughput (DD Boost) 2.4 TB/hr 3.4 TB/hr 5.4 TB/hr 7 Power Dissipation 339 W 500 W 688 W 7 Cooling Requirements 1,157 BTU/hr 1,705 BTU/hr 2,347 BTU/hr 1. M ix of typical enterprise backup data (file systems, databases, email, developer files), full backup weekly, incremental backup daily, to system capacity. 2. Mix of typical enterprise data (file systems, databases, email, developer files), full backup daily, to system capacity. 3. All capacity values are calculated using Base 10 (i.e., 1 tB = 1,000,000,000,000 bytes). 4. Includes support for add-on shelves. 5. Maximum throughput achieved using Symantec OpenStorage and 10 Gb Ethernet. 6. Maximum throughput achieved using DD Boost and 10 Gb Ethernet. 7. Controller only. 8. Maximum throughput achieved using VTL interface and 4 Gbps Fibre Channel. 9. Maximum throughput achieved using NFS and 10 Gb Ethernet. SOFTwARE EMC Data Domain Operating System (DD OS) 5.2 or later SOFTwARE FEATURES Global CompressionTM, Data Invulnerability Architecture including inline verification and integrated dual disk parity RAID 6, snapshots, telnet, FTP, SSH, email alerts, scheduled capacity reclamation, Ethernet failover and aggregation, Link Aggregation Control Protocol (LACP), VLAN tagging, IP aliasing, EMC Data Domain Boost, EMC Data Domain Virtual Tape Library (for open systems and IBM i operating environments), EMC Data Domain Encryption, EMC Data Domain Replicator, and EMC Data Domain Retention Lock optional software SYSTEM MAnAGEMEnT EMC Data Domain Enterprise Manager, SNMP, and command line interface DATA ACCESS NFS v3 over TCP, CIFS, DD Boost, tape library emulation (VTL) over Fibre Channel, and NDMP Tape Server SYSTEM EXPAnSiOn DD670 System Dimensions (W x D x H) • Twelve 1 TB internal drives • Up to two DD640/DD670: 19” x 29.5” x 3.5” (48.3 cm x expansion shelves with 2 TB drives 74.9 cm x 8.9 cm) 2 EIA units • Up to four expansion shelves with 1 TB shelves DD620: 19” x 22” x 3.5” (48.3 cm x 55.9 cm x 8.9 • Support for a mix of expansion shelves with 2 cm) 2 EIA units TB drives or 1 TB drives up to maximum external Minimum Clearances storage capacity Front, with bezel: 1.56” (4.0 cm) Rear: 5” (12.7 • Support for a mix of ES30 and ES20 shelves up cm) to maximum external storage capacity Power (VA) DD640 100-120/200-240 V~, 50/60 Hz DD670: 12 • Seven or twelve 1 TB internal drives drives, 724 VA DD640: 7 drives, 451 VA; 12 • One ES30 expansion shelf with 2 TB drives drives, 526 VA DD620: 7 drives, 330 VA; 12 • Up to two ES30 expansion shelves with 1 TB drives, 373 VA drives System Thermal Rating DD620 DD670, 12 drives: 2,347 BTU/hr, 688 Watts • Seven or twelve 1 TB internal drives DD640, 7 drives: 1,462 BTU/hr, 428 Watts • No external expansion DD640, 12 drives: 1,705 BTU/hr, 500 Watts DD620, 7 drives: 1,061 BTU/hr, 311 Watts REGUlATORY APPROVAlS DD620, 12 drives: 1,157 BTU/hr, 339 Watts Safety: UL 60950-1, CSA 60950-1, EN 60950-1, Operating Temperature/Altitude IEC 60950-1, GS, SABS, GOST, IRAM DD640/DD670: 5°C to 35°C (41°F to 95°F), 35°C Emissions: FCC Class A, EN 55022, CISPR 22, at 7500 feet, derate 1.1°C/1000 feet above 7500 VCCI, BSMI, MIC, ICES-003 Immunity: EN 55024, feet to 10,000 feet CISPR 24 Power Line Harmonics: EN 61000-3-2 DD620: 10°C to 35°C (50°F to 95°F), 35°C at 7500 feet, derate 1.1°C/1000 feet above 7500 feet to HARDwARE PlATFORM 10,000 feet 2U 19-inch, rack mountable, use in 4-post rack, Operating Humidity hotplug disks, redundant fans, redundant power 20% to 80% non-condensing supplies, serial port, 2 copper 10/100/1000. Non-Operating (Transportation) Temperature Ethernet ports, optional dual-port copper or -40°C to +65°C (-40°F to +149°F) optical 1 Gb Ethernet and quad-port copper 1 Gb Operating Acoustic Noise Ethernet. Optional dual-port copper or dual-port DD640/DD670: declared noise emission values optical 10 Gb Ethernet on DD640 and DD670 per ISO 9296: models only. DD670 Sound power, LWAd: 7.4 bels Sound System Weight pressure, LpAm: 58 db DD670, 12 drives: 66 lbs (30 kg) DD640, 7 DD640 Sound power, LWAd: 7.52 bels Sound drives: 51 lbs (23.2 kg) DD640, 12 drives: 58 lbs COnTACT US pressure, LpAm: 56.4 db (26.4 kg) DD620, 7 drives: 49 lbs (22.1 kg) DD620: Max 7.9 BA, sound power at 25°C To learn more about how EMC products, DD620, 12 drives: 57 lbs (25.8 kg) services, and solutions help solve your business and IT challenges, contact your local representative or authorized 2 EMC , EMC, Avamar, Data Domain, Global Compression, NetWorker, SISL, and the EMC logo are registered trademarks or trademarks reseller—or visit us at www.EMC.com. of EMC Corporation in the United States and other countries. All other trademarks used herein are the property of their respective owners. © Copyright 2011, 2012 EMC Corporation. All rights reserved. Published in the USA. Data Sheet 05/12 H6798.4 EMC Corporation EMC Backup Recovery Systems Hopkinton, Massachusetts 01748-9103 Santa Clara, California 95054 1-508-435-1000 1-408-980-4800 in north America 1-866-464-7381 in north America 1-866-933-3873 www.EMC.com