292248 - EMBEDDED SOLUTIONS

Description

Embedded Solutions 292248 CPU Board - 1.0 GHz, 512k L2 cache, PC/104+ CPU

Part Number

292248

Price

Request Quote

Manufacturer

EMBEDDED SOLUTIONS

Lead Time

Request Quote

Category

PRODUCTS - 2

Specifications

AC97-Controller

Intel ICH4 – AC97 V2.3

Audio Input

Stereo-Line, Mic and SPDif

Audio Output

Stereo Output and SPDif

BIOS

Award

Chipset Intel

855GME / ICH4

COM1

RS232

COM2

RS232

CPU Speed Steps

100MHz software program. via CSR

Dimensions

4.5” x 3.8” (115mm x 96mm)

EIDE-Controller

PIO 1-4 and UDMA 100*/66*/33

Flash BIOS

512KB/1MB

Floppy Disk

Available

Front Side Bus

400MHz

HW-Monitor

Winbond W83627HF

INTEL Speed Step Technology

Geyserville III

ISA-Bus

Fintek F85226F

Keyboard

PS/2-USB

L2-Cache

2048KB / 1024KB / 512KB

LAN-Controller

Intel ICH4 – ext. PHY 82562EZ

LPT1

Uni/ECP/EPP

Memory 200pin DDR SODIMM

128MB* – 1024MB

Mouse

PS/2-USB

PCI-Bus

V2.2

Power Management Control

ACPI / APM

Power Supply

5volt +/-250mV

Processor

Intel Pentium M

Processor/CPU

Intel Pentium M / Celeron M

Real Time Clock

Yes

SMBus-Controller

Intel ICH4 – SMBus

USB2-Controller

4 Ports V2.0

Video Channel 1

1600x1280x16 @ 85Hz max

Video Channel 2

LVDS 18/24/36/48 Bit

Video Controller

855GME Intel Extreme Graphics 2

Video Interfaces

VGA-Analog, LVDS

Video Memory

1 – 32MB UMA DDR-RAM

Weight

(gr) 120 g

Features

10/100 Base-T LAN-Ethernet
128MB - 1024MB DDR-SDRAM
4 x USB2.0 Ports
COM1, COM2, LPT1
CRT/LCD on-board
Direct-X Video Controller
EIDE Hard Disk Interface
Intel 855GME / ICH4, 400MHz FSB
Intel Pentium M / Celeron M, 0.6GHz - 1.8GHz
Non Volatile Setup Save
Power Management (APM 1.2 plus features)
RTC and Watchdog Timer
Single 5VDC Power Supply

Datasheet

ADL855P-1020925998C.pdf

204 KiB

Download

Extracted Text

Embedded Solutions PC/104 - Plus ® ® ADL855PC - Pentium M / Celeron M CPU 0.6GHz - 1.8GHz Features ® ® ® • Intel Pentium M / Celeron M, 0.6GHz - 1.8GHz ® • Intel 855GME / ICH4, 400MHz FSB • Power Management (APM 1.2 plus features) • 128MB - 1024MB DDR-SDRAM • Direct-X Video Controller • CRT/LCD on-board • 10/100 Base-T LAN-Ethernet • 4 x USB2.0 Ports • EIDE Hard Disk Interface • COM1, COM2, LPT1 • RTC and Watchdog Timer • Non Volatile Setup Save • Single 5VDC Power Supply Description Ordering Information ® ® ® The ADL855PC is based on the Intel Pentium M / Celeron M Item Codes Part# Description ® processors offering clock rates up to 1.8GHz. The Intel 855GME ® chipset (GMCH) supports a 400MHz FSB with integrated Intel ADL855PC-600C-G5 292243 0.6 GHz, 512k L2 cache, PC/104+ CPU Graphics controller “Extreme Graphics 2“. It can drive either a ADL855PC-373C-G5 292248 1.0 GHz, 512k L2 cache, PC/104+ CPU CRT or LVDS LCD. The memory is added via an SODIMM200 ADL855PC-370-G5 292249 1.5Ghz, 1024k L2 cache, PC/104+ CPU socket and can accept up to 1Gigabyte of DDR333 SDRAM. ADL855PC-738-G5 292246 1.4 GHz, 2048k L2 cache, PC/104+ CPU ADL855PC-745-G5 292245 1.8 GHz, 2048k L2 cache, PC/104+ CPU Additional options are available, please contact our sales department. The ADL855PC power management incorporates ACPI/APM func- ® ® SoDIMM200 SDRAM Memory tions, which utilizes Intel's Advanced SpeedStep (Pentium M DDR-DRAM128-3 994715 128MB DDR 333MHz STD TEMP only) feature. The standard ADL855PC also incorporates PCI 2.2 DDR-DRAM256-3 994825 256MB DDR 333MHz STD TEMP Bus, EIDE, 4xUSB 2.0, 2xRS232 COM ports, PS/2 Keyboard and DDR-DRAM512-3 994925 512MB DDR 333MHz STD TEMP Mouse, parallel printer, AC97 Sound, and 10/100MBit LAN and DDR-DRAM1024-3 994025 1024MB DDR 333MHz STD TEMP more. DDR-DRAM512-3EX 994928 512MB DDR 333MHz -40°C - +85°C DDR-DRAM1024-3EX 994028 1024MD DDR 333MHz -40°C - +85°C ADL Embedded Solutions offer highly effective active and passive DDR-ECC512 TBD 512MB ECC DDR 333MHz STD TEMP DDR-ECC1024 TBD 1024MB ECC DDR 333MHz STD TEMP cooling solutions based on proven thermal data and mounting DDR-ECC512-EX 995928 512MB ECC DDR 333MHz -40°C - +85°C techniques; resulting in the least possible mechanical board stress. DDR-ECC1024-EX 995026 1024MB ECC DDR 333MHz -40°C - +85°C Please contact your Sales Engineer for detailed information on cooling solutions to fit your needs. Thermal Solutions ADLTS2HSS 292054 2 piece Heat-Sink Thermal Solution Note: On the basis of its current material planning, ADL Embed- ADLTSHSS-Fan 293057 Companion fan for ADLTS2HSS ded Solutions guarantees product availability for the 855GME ADLTS2Pipe 293054 2 Heat-Pipe Thermal Solution chipset, Pentium-M 745 1.8GHz and Celeron-M 373 1.0GHz proc- ADL855PC-SPREADER2 293152 .6” Heat Spreader essors until 2015, thus providing sufficient time for customers to ADL855PC-SPREADER3 293153 1” Heat Spreader transition from the 16-bit ISA bus to newer interconnect technolo- gies. The Celeron-M at 600MHz and 1.5Ghz, and the Pentium-M Optional Cables ADL855PC-CK 293045 Development cable kit at 1.4GHz processors will undergo normal last time buy process ADL8XX-PC 100-9700 ADL power cable for ADL855/LX8/S15 when EOL is announced by Intel. Individual development cables are available, please contact our sales department. Data subject to change without notice ADL Embedded Solutions GmbH, Eiserfelder Straße 316 D-57080 Siegen, ADL Embedded Solutions Inc., 4411 Morena Blvd., Suite 101 Germany P. +49 (0) 271 250 810 0 F. +49 (0) 271 250 810 20 San Diego, CA 92117-4345 P. +1 858 490-0597 F. +1 858 490-0599 e-mail: sales@adl-europe.com; web: www.adl-europe.com e-mail: sales@adl-usa.com; web: www.adl-usa.com Embedded Solutions PC/104 - Plus Feature Technical Specifications FEATURES FUNCTIONS REMARKS OPTIONS ® ® ® Processor/CPU: Intel Pentium M / Celeron M 0.6GHz - 1.8GHz L2-Cache: 2048KB / 1024KB / 512KB CPU Dependent ® CPU-Clock: 0.6GHz Celeron M ® CPU-Clock: 1.0GHz Celeron M ® CPU-Clock: 1.4GHz Pentium M ® CPU-Clock: 1.5GHz Celeron M ® CPU-Clock: 1.8GHz Pentium M ® Chipset Intel 855GME / ICH4 Front Side Bus 400MHz ® CPU Speed Steps: 100MHz software program. via CSR N/A on Celeron M ® INTEL Speed Step Technology: Geyserville III N/A on Celeron M *128MB - 256MB available on request Memory 200pin DDR SODIMM: 128MB* – 1024MB ECC Memory Supported Video Controller: 855GME Intel Extreme Graphics 2 Video Memory: 1 – 32MB UMA DDR-RAM 64MB Window Video Interfaces: VGA-Analog, LVDS Video Channel 1: 1600x1280x16 @ 85Hz max Video Channel 2: LVDS 18/24/36/48 Bit 36/48 requires second cable Real Time Clock: Yes External Battery Required for RTC ® LAN-Controller: Intel ICH4 – ext. PHY 82562EZ 10/100 MBit with PXE and RPL ® AC97-Controller: Intel ICH4 – AC97 V2.3 ALC650 Codec 5.1 Sound ® SMBus-Controller: Intel ICH4 – SMBus USB2-Controller: 4 Ports V2.0 Flash BIOS: 512KB/1MB 2MB available on version G5 BIOS: Award Power Management Control: ACPI / APM EIDE-Controller: PIO 1-4 and UDMA 100*/66*/33 Primary Master/Slave *requires 80 conductor cable HW-Monitor: Winbond W83627HF Audio Output: Stereo Output and SPDif 5.1 Support Audio Input: Stereo-Line, Mic and SPDif Keyboard: PS/2-USB Mouse: PS/2-USB COM1: RS232 115KBit max, TTL solder COM2: RS232 115KBit max, TTL solder LPT1: Uni/ECP/EPP Shared with FDC Floppy Disk: Available Shared with LPT ISA-Bus: Fintek F85226F LPC-ISA-Bridge, 16-Bit PCI-Bus: V2.2 Support For 4 Masters Spec: PC/104 Plus V2.0 Power Supply: 5volt +/-250mV ADLPS104CF recommended Power consumption: TBD. Extended Temperature ® Celeron M 0.6GHz: -20°C to +75°C With ADL Embedded Solutions thermal solutions -40°C to +85°C ® Celeron M 1.0GHz: -20°C to +75°C With ADL Embedded Solutions thermal solutions Available Operating Temperature: ® Pentium M 1.4GHz: -20°C to +60°C With ADL Embedded Solutions thermal solutions (typ. ambient) Provided CPU is kept below 100°C at all ® Celeron M 1.5GHz: -20°C to +60°C With ADL Embedded Solutions thermal solutions times and the installation has sufficient ® Pentium M 1.8GHz: -20°C to +60°C With ADL Embedded Solutions thermal solutions thermal path to dissipate Dimensions: 4.5” x 3.8” (115mm x 96mm) Weight: (gr) 120 g Data subject to change without notice ADL Embedded Solutions GmbH, Eiserfelder Straße 316 D-57080 Siegen, ADL Embedded Solutions Inc., 4411 Morena Blvd., Suite 101 Germany P. +49 (0) 271 250 810 0 F. +49 (0) 271 250 810 20 San Diego, CA 92117-4345 P. +1 858 490-0597 F. +1 858 490-0599 e-mail: sales@adl-europe.com; web: www.adl-europe.com e-mail: sales@adl-usa.com; web: www.adl-usa.com

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products