Manufacturers
ELPAC WM113TT
Description
Elpac WM113TT 120VAC 5V 11.3 watt Power Supply
Part Number
WM113TT
Price
Request Quote
Manufacturer
ELPAC
Lead Time
Request Quote
Category
PRODUCTS - W
Specifications
Frequency
60.0 Hz
Number of Outputs
3
Operating Temperature
0.0 to 40.0 °C
Output Current
860 mA
Output Power
11.3 W (max)
Output Voltage
5.00 V
Size-Height
66.0 mm
Size-Length
165 mm
Size-Width
97.8 mm
Features
- CSA Approved
- UL 1310 listed
Datasheet
Extracted Text
ELPAC ELPAC POWER SUPPLY For TV Game & Computer peripheral equipment Input: 115VAC Output: 20 millivolts ELPAC POWER SUPPLY or TV ame & Compu F G ter peripheral equipment Input: 115VAC Output: 20 millivolts External Power Supplies Wide Range Input Series - Switching OUTPUT PIN CONFIGURATION-5 PIN DIN Regulated Tabletops Single Output Model Features: 1 MODEL PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 3 • IEC input connector • One year warranty 4 5 WRI4212 COM COM 12V COM 12V 2 General Specifications: WRI4214 COM COM 24V COM 24V • Storage Temperature: -55°C ~ 85°C WRI5215 COM COM 30V COM 30V • Oper ating Temperature: 0°C ~ 40°C Dual Output Model Output Specifications: MODEL PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 • Line Regulation: ±0.2% maximum • Load Reg u lation: ±5% from 60% load nominal except output #2 • Cross Regulation: ±2%. Cross regulation specifies the maximum WRI3021 COM COM 5V COM 12V volt age change on auxiliary outputs when the +5V output load cur rent is varied from 75% of full rated to either 50% or 100% of full rated • Set Point: ±2% at 60% load on main input • Rip ple and Noise: ±1% maximum • Over load Protection: All outputs protected against overloads and short circuit. Automatic re covery upon removal of overload Triple Output Model conditions • Overvoltage Protection: Provided on main output only and set at 115-135% • Output Overshoot: No over shoot on turn-on or turn-off • Tran sient Response: For all MODEL PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 outputs, recovery to within 1% of nominal output occurs within 2 milliseconds for a 50% to 100% load step. Maximum excursion is 6% from initial volt age setpoint WRI2731 COM COM 5V -12V 12V • Hold-Up Time: 25msec minimum at full rated load and nominal AC input voltage • Minimum Load: Third quarter down to zero load WRI3031 COM COM 5V -12V 12V Approved by all major regulatory agencies WRI4231 COM COM 5V -12V 12V WRI4232 COM COM 5V -12V 12V Note: Outside ring on all units is an EMI earth ground (Not to be used as a safety ground). FCC IEC Regulated Wallmounts Regulated Features: • UL 1310 and UL 1950 listed, Tabletops CSA Approved • One year warranty 1 3 4 5 DIN PINOUT MATRIX 2 Specifications: • Output Ripple: 20 millivolts MODEL PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 (p-p) • Operating Temperature: 0°C ~ 40°C WM113TT COM N/C 5V -12V 12V • Combined Regulation: ±5% • Fusing: Internal and non-replaceable WM220-1 COM N/C 5V -12V 12V Options: • Shielded output cable - S Option: DIN PINOUT MATRIX Features: • UL 1310 listed, CSA Approved • One year warranty Shielded cable with EMI ground tied to outer MODEL PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 Specifications: • Output Ripple: 20 millivolts (p-p) • Oper ating Temperature: 0°C ~ 40°C • Combined 1 3 ring of DIN connector (Not to be used as 4 5 WM063 COM N/C 5V -12V 12V Regulation: ±5% • Fusing: Internal and non-replaceable 2 safety ground) Options: • Shielded output cable - S Option: Shielded cable with EMI ground tied to outer ring of DIN WM075 COM N/C 5V COM 5V Connector Type: DIN connector (Not to be used as safety ground) • Connector Type: Din. WM144 COM N/C 12V COM 12V UL and CSA Approved UL and CSA Approved AC DC Outputs Max. Dimensions - Inch (mm) Digi-Key Price Each Elpac Input Watts L x W x H Part No. 1 5 10 Part No. Single Double Triple Wide Range Input Series-Regulated Tabletops 12V, 3.5A — — 42† 6.3 x 3.82 x 2.66 (160.02 x 97.03 x 67.56) EPS112-ND 132.77 119.50 110.20 WRI4212-D5 5V, 2.0A 12V, 1.5/2.5A* — 30 6.3 x 3.82 x 2.66 (160.02 x 97.03 x 67.56) EPS109-ND 146.42 131.78 121.53 WRI3021-D5 90-250VAC, 47-440Hz 5V, 3.0A 12V, 0.5A -12V, 0.5A 27†† 6.3 x 3.82 x 2.66 (160.02 x 97.03 x 67.56) EPS106-ND 158.83 142.95 131.83 WRI2731-D5 5V, 3.0A 12V, 2.5/4.0A* -12V, 0.5A 42 6.3 x 3.82 x 2.66 (160.02 x 97.03 x 67.56) EPS115-ND 153.87 138.48 127.71 WRI4231-D5 5V, 4.8A 12V, 1.5/2.5A* -12V, 0.5A 42 6.3 x 3.82 x 2.66 (160.02 x 97.03 x 67.56) EPS116-ND 153.87 138.48 127.71 WRI4232-D5 Regulated Wallmounts 115VAC, 60Hz 5V, 600mA +12V, 180mA -12V, 160mA 6.8 1.80 x 2.60 x 4.50 (45.72 x 66.04 x 114.30) EPS142-ND 50.87 45.79 42.23 WM063-1950-D5 Regulated Tabletops 5V, 860mA +12V, 300mA 12V, 300mA 11.3 2.28 x 3.10 x 4.36 (57.91 x 78.74 x 110.74) EPS131-ND 69.49 62.54 57.68 WM113TT 115VAC, 60Hz 5V, 2.0A -12V, 500mA 12V, 500mA 22 2.28 x 3.10 x 5.025 (57.91 x 78.74 x 127.64) EPS134-ND 148.90 134.02 123.59 WM220-1 † Minimum load on models=8 Watts †† Minimum load on models=2 Watts Maximum Peak * Unregulated Brute Force Linear Power Supplies Features: • Isolated outputs for positive or negative operation • Full rated output from 0°C ~ 40°C • Selectable input terminations • Standard Input: 105/115/125VAC, 47-440 Hz • Warranty: 5 years Max. No Load Full Load Dimensions - Inch (mm) Weight Digi-Key Price Each Elpac Vdc Amps Watts (V) (V) L x W x H (lbs) Part No. 1 5 10 Part No. 24 2.4 60 34.5 26.5 6.3 x 3 x 3.7 (160.02 x 76.2 x 93.98) 5 EPS300-ND 272.99 245.69 226.58 BFS60-24 12 15 200 15.4 12.5 8.1 x 3.9 x 5 (205.74 x 99.06 x 127) 12 EPS304-ND 272.99 245.69 226.58 BFS200-12 24 20 500 29.2 24.6 9 x 4.6 x 5.6 (228.6 x 116.84 x 142.24) 20 EPS306-ND 337.51 303.76 280.14 BFS500-24 M Domestic WP12 Series: • A/C Input: 90-132VAC • Input Protection: Internal input line fuse • Over load Protection: Output protected against overload and short circuit • Minimum Load: 0 Watts • Oper ating WP12 Series Temperature Range: 0°C ~ 40°C • Output Cable: 6 foot with 760 type barrel plug; ID = 2.5mm, OD = 5.5mm, Barrel Length 10.00mm - Inside Positive • Two-Year Warranty • Agency Approvals: NRTL (UL) and CSA • EMI: FCC Class B DC Outputs Max. Dimensions - Inch (mm) Digi-Key Price Each Elpac Single Power L x W x H Part No. 1 5 10 Part No. Wall Mount - Domestic Power Supply 5V @ 2.4A 12W EPS162-ND 40.33 36.30 33.48 WP1205-760 3.00 x 2.00 x 1.00 24V @ 0.5A 12W EPS164-ND 40.33 36.30 33.48 WP1224-760 Free shipping on orders over $200 CAD! All prices in Canadian dollars and include duty and brokerage fees. 2438 (C091) 1-800-344-4539 • ca.digikey.com • 218-681-6674 • Fax: 218-681-3380
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the WM113TT have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
ELPAC-WM063-1950-D5-Adapter; 5, 12, -12 V; 0.6 A @ 5 V, 0.16 A @ 12 V, 0.16 A @ -12 V; 120; 5%
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods