ELPAC FW3012-760F
Specifications
Hold-Up Time
>20ms at any input voltage
Input Frequency
47 – 63Hz
Input Voltage
85 – 264VAC 100 – 240VAC Nominal
Minimum Load
No minimum load required
Output Voltage
See Table
Over Current Protection
120 – 180%
Over Temperature Protection
Active - Recoverable; plus Passive - Non Recoverable
Over Voltage Protection
110 – 135%
Short Circuit Protection
Shutdown, auto-restart (hiccup mode)
Total Regulation
+/-5%
Features
- ENERGY STAR Level V
- Fully Regulated DC Output
- High Efficiency
- Hold-up Time >20ms at full load
- Lifetime Expectation >5 years
- RoHS Compliant
- Safety Approval - EN60950-1 Class I
Datasheet
FW30_Series_Datashee-1511941064t.pdf
754 KiB
Extracted Text
FW30 Series 30 watts Switch Mode Power Supply MSM80 Series 80 watts ▪ High Efficiency Medical Switch Mode Power Supply ▪ Fully Regulated DC Output ▪ Lifetime Expectation >5 years TECHNICAL SUPPORT ▪ High Efficiency ▪ Hold-up Time >20ms at full load 1 2 3 4 Model Number Output Voltage Output Current Forced Air Current Total Regulation Typical Eff iciency ▪ Fully Regulated DC Output ▪ Safety Approval - EN60950-1 Class I wORLDwIDE MSM8009F 9.0V 6.6A 8.8A ±5% 88% 1-888-357-2280 ▪ Lifetime Expectation >5 years ▪ Energy Star Level v MSM8015F 15.0V 5.0A 6.6A ±5% 89% saleselpac@iccus.com MSM8018F 18.0V 4.0A 5.3A ±5% 89% www.iccus.com ▪ Hold-up Time >20ms at full load ▪ RoHS Compliant MSM8024F 24.0V 2.5A 3.4A ±5% 90% ▪ Safety Approval - EN60950-1 Class I EUROPE +44.1383.432920 ▪ ENERGY STAR Level V saleseurope@iccus.com ENERGY STAR PARTNER ▪ RoHS Compliant As a Global Supplier of Power Sup- 5-YEAR LIMITED wARRANTY* plies, we are committed to meet- ENERGY STAR PARTNER ing energy effi ciency standards around the world. That is why we As a Global Supplier of Power Sup- have partnered with the ENERGY plies, we are committed to meet- Input Output STAR® Program and engineer our ing energy efficiency standards 5-YEAR LIMITED wARRANTY* TM Elpac Power Systems to meet 85 – 264VAC around the world. That is why we Input Voltage Output Voltage See Table 100 – 240VAC Nominal strict energy-effi ciency guidelines have partnered with the ENERGY established by the EPA and the US STAR® Program and engineer our Input Frequency 47 – 63Hz Total Regulation +/-5% Department of Energy (DOE). The TM Elpac Power Systems to meet Energy Star program has devel- strict energy-efficiency guidelines oped International partnerships Input Current <1.0A rms Minimum Load No minimum load required established by the EPA and the US with countries and organizations Department of Energy (DOE). The in major global markets. Those Energy Star program has devel- Inrush Current <37A at 230VAC cold start Start-Up Delay <250ms participating in the program oped International partnerships include Australia, Canada, Euro- Zero Load >20ms at any with countries and organizations <0.3W Hold-Up Time Power Consumption input voltage pean Union, European Free Trade in major global markets. Those Association, Japan, New Zealand, participating in the program <250µA @ 132VAC @ 60Hz Ripple & Noise <1% pk-pk ** and Taiwan. include Australia, Canada, Euro- Touch Current/ Leakage Current pean Union, European Free Trade Furthering our International com- <400µA @ 264VAC @ 60Hz Over Voltage Protection 110 – 135% Association, Japan, New Zealand, mitment, we have signed the EU and Taiwan. Code of Conduct on Effi ciency of Active - Recoverable; plus Over Temperature Protection Passive - Non Recoverable External Power Supplies. Our El- Furthering our International com- TM pac Power Systems Fw18 series mitment, we have signed the EU Over Current Protection 120 – 180% meets the effi ciency standards of Code of Conduct on Efficiency of the International ENERGY STAR® External Power Supplies. Our El- Shutdown, auto-restart Short Circuit Protection program and the EU Code of TM (hiccup mode) pac Power Systems Fw30 series Conduct. meets the efficiency standards of Notes the International ENERGY STAR® *visit www.iccus.com for complete details **Ripple and noise measured with 20MHz bandwidth; 10µF tantalum capacitor in parallel with a 0.1µF ceramic capacitor. program and the EU Code of Conduct. A A FW30 Series 30 watts Switch Mode Power Supply 1 2 3 4 Model Number Output Voltage Output Current Peak Current Total Regulation Typical Efficiency FW3009-760F 9.0V 3.3A 3.9A ±5% 81% FW3012-760F 12.0V 2.5A 3.0A ±5% 83% FW3015-760F 15.0V 2.0A 2.4A ±5% 84% FW3018-760F 18.0V 1.7A 2.0A ±5% 85% FW3024-760F 24.0V 1.3A 1.5A ±5% 86% Notes 1) All models ship standard with US version input cable. 2) Maximum peak load (36W) lasting 500ms with a maximum 10% duty cycle. 3) Includes initial setting, line regulation, load regulation, and thermal drift. 4) Typical at 115VAC (including output cable). General Environmental EMC & Safety Avg Efficiency 84.5% @ 115VAC; Operating 0 – 60°C (Full load to 40°C, derate FCC class B, CISPR22 class B Efficiency Emissions 83.4% @ 230VAC Temperature linearly to 50% load at 60°C) EN61000-3-2, -3 Storage MTBF min. 100,000 hours demonstrated -40°C to +85°C Immunity EN61000-4-2, -3, -4, -5, -6, -8, -11 Temperature cTUVus 4.25" (108.0mm) x 2.50" (64.5mm) x Relative Size 5-95%, non-condensing 1.30" (33.0mm) Humidity Certified by: UL 60950-1 Weight 0.70 lbs (0.32 kg) Cooling Natural Convection CAN/CSA-22.2 No.950 CB per IEC60950-1 All units production tested to Vibration 2 19.6m/s CE marked to LVD & EMC Directive Input Configuration Output Configuration Output Pin Assignments Standard Center +V1 6ft 6 ft cable with Rtn +V Output Cable Standard US standard (Nema 5-15) Outside Return Input Cable 3 prong connector Connector Switchcraft 760 or equivalent (PSU side) Connection on IEC 320 C14 Receptacle Power Supply Body Mating Switchcraft 712A or equivalent Connector Mechanical Drawing Ordering Options Available (Contact Factory) Without input cable Floating output 4.31" [109.6mm] 1.30" [33.0mm] 4.25" [108.0mm] | | | 1-888-357-2280 saleselpac@iccus.com www.iccus.com 1562 Reynolds Avenue Irvine, CA 92614 2.54" [64.5mm]
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the FW3012-760F have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods