ELECTRONIC SIGNALS ® Adaptatone Millennium Multiple Tone Signal Four Outputs 5531M Series FEATURES > 27 tone capability - No additional The Edwards 5531M Series Adaptatone Millennium is a heavy-duty tone modules needed industrial, tone-selectable, signaling device capable of producing > Output up to 110 dB @ 10 ft volume-controlled, high-decibel tones. four tones can be activated from field-wired, normally open contacts, or a 24VDC or 120VAC > PLC compatible external voltage source such as the output of a PLC. Normally open > Suitable for Division 2 Locations contacts can be obtained from the Cat. No. 5538-4 and/or Cat. No. > Captive Components 5538-4R Adaptatone Signal Actuators. See page 4-49. AGENCY APPROVALS The unit uses a microprocessor circuit to create 27 distinctive tones, by setting miniature dip switches within the unit. The pro- > NEMA Type 3R grammed tones operate on a pyramid-type priority system. For > IP 44 more information on priority tone operation and a complete listing of > UL 464 and 1604 all 27 tones, see page 4-55. > UL Listed for indoor and outdoor Designed for industrial applications. Typical applications include applications in Class I, Division emergency warning systems, plant evacuation and security alarms, 2, Groups A, B, C & D; Class II, process monitoring, shift notification horns, and paging signals. Division 2, Groups F & G; and Class III Hazardous Locations The 5531M is designed for either 1/2" (13mm) conduit or surface > cUL C22.2 No. 205 (24AQ, 24N5 mounting. See Adaptatone Signaling Installation, pages 4-56. & 24Y6 models) > CE Marked, LV & EMC Directives, (24Y6 AC only & 24AQ models) > TUV Rheinland Certified SPECIFICATIONS > Built-in cascading priority system > Speaker can be rotated and locked in any horizontal direction > 24V DC battery backup terminals || 90 Fieldstone Court ||| Cheshire, CT 06410 © Copyright 2004 Edwards Ph: 203.699.3300 ||||| Fx: 203.699.3108 www.edwards-signals.com D-04 4-18 D-04 4-19 ELECTRONIC SIGNALS TECHNICAL INFORMATION 8" 8 47/64" (222mm) (203mm) 8" (203mm) Nut to adjust speaker direction 2 1/2" 6" 4" Mounting 13 3/4" (64mm) (152mm) (102mm) (349mm) flange 4 holes (2 each side) 6" (152mm) 1/2" (13mm) 3 1/2" conduit mounting (89mm) 8" (203mm) Operating Input Card Signal Off Signal On Cat. No. Voltage Activation Voltage Standby Current (Amps) Operating Current (Amps) 5531M-24AQ 24V DC 24VDC 0.10 0.57 24V AC 50/60 Hz 0.10 0.98 5531M-24N5 120V AC 50/60 Hz 24VDC 0.10 0.23 5531M-120N5 120VAC 0.10 0.23 5531M-24Y6 120V AC 50/60 Hz 24VDC 0.10 0.28 5531M-120Y6 240V AC 50/60 Hz 120VAC 0.08 0.15 125V DC 0.10 0.15 250V DC 0.02 0.08 SIGNAL INPUT LOAD CHARACTERISTICS* (PLC output to meet following product input parameters) Operating Max. off state Continuous on Surge (inrush/duration) Cat. No. voltage leakage current (mA) current (mA) Amps/milliseconds 5531M-24AQ 24V DC only 2 740 8/4 5531M-24N5 120V 50/60 hz 2 360 2.82/4 5531M-120N5 120V 50/60 hz 5 380 2.82/4 24VDC 5V DC to 24V DC 2 6 — Input Board (each input) 120VAC 120VAC 50/60 Hz 5 13 — Input Board (each input) *This device is PLC compatible and may be operated by PLCs with output characteristics that match the input load requirements of this signal. || 90 Fieldstone Court ||| Cheshire, CT 06410 © Copyright 2004 Edwards Ph: 203.699.3300 ||||| Fx: 203.699.3108 www.edwards-signals.com