Message Outdoor Push Buttons ADA/Hospital Telephone Electronic Bells & Horns & Electric Fire Alarm Centers & Warning Contactors Transformers Clocks Signaling Signals & Appendix Appendix Signals Buzzers Sirens Chimes Equipment Annunciators Signals Door Devices Devices Accessories ® Edwards 5530B Series ® Adaptatone Multiple Tone Industrial Signal PLC Compatible* systems, plant evacuation and security Features intrusion alarms, process monitoring, • PLC compatible shift start-and-dismissal horns, and • Stand-alone. 19 tone capability - No paging signals. additional tone modules needed • Four 3 pulse temporal tones *PLC COMPATIBILITY • Weatherproof This device may be operated by PLCs that match the input load require- • Single Input, Single Output ments of this signal. Be sure to match the input load characteristics of the • Corrosion resistant heat flowed ep- signal with the output characteristics of the PLC before connecting. oxy finish Signal Input Load Characteristics Description The Edwards 5530B Adaptatone Sig- Operating Max. off state Continuous on Surge nal is a heavy-duty industrial, tone- voltage leakage current current (inrush/duration) selectable, stand-alone, signaling de- Cat. No. Volts/60 Hz mA mA Amps/milliseconds vice capable of producing volume- 5530B-N5 120V AC 25 260 2.82/4 controlled, high-decibel tones. It uses 5530B-AQ 24VDC only 25 650 25/.024 a microprocessor circuit to create 19 distinctive tones selected by setting a 8 47/64" miniature switch within the unit. See (222mm) Adaptatone Tone Selection, page 4-64 The electrical inputs activating an Adaptatone Signal are received from field-wired, normally open contacts or 8" (203mm) from the Cat. No. 5538-4 and/or Cat. Nut to adjust speaker No. 5538-4R Adaptatone Signal Ac- 13 3/4" direction (349mm) tuators. See page 4-40. Signal Box Agency Approvals (4) Cover Screws • UL Listed for indoor and outdoor applications (2) Mounting holes for wall Specifications mounting 1/2" (13mm) pipe for • Heavy duty zinc cast construction conduit mounting 3 1/2" (not supplied) • Output up to 110 dB at 10 ft (89mm) • Speaker can be rotated and locked in any horizontal direction Ordering and Technical Data • 24V DC battery backup terminals Audio Signal Off Signal On provided Output Standby Operating Power Current Current Installation Cat. No. Volts (Watts) (Amps) (Amps) The 5530B is designed for either 1/2" 5530B-AQ 24V DC 15 0.06 0.60 (13mm) conduit or surface mounting. 36V DC 15 0.07 0.68 See Adaptatone Signaling Installation, 24V AC 50/60 Hz 15 0.26 1.36 pages 4-62 and 4-63. 5530B-N5 120V AC 50/60 Hz 15 0.10 0.29 Applications 5530B-Y6 120V AC 50/60 Hz 15 0.10 0.29 Designed for industrial applications 240V AC 50/60 Hz 15 0.11 0.23 requiring high decibel output and mi- 125V DC 15 0.05 0.16 croprocessor reliability. Typical appli- 250V DC 15 0.04 0.10 cations include emergency warning © 2000 EDWARDS 4-45 CHESHIRE, CT 06410 www.edwards-signals.com Fax-on-Demand # 1105 ® Adaptatone Tone Selection and Priority Operation standards may require specific tones ority system. The tone programmed Programmable Tone such as siren, horn, hi-lo. In some on switch 1 overrides the tones pro- Selection cases varying ambient noise may ne- grammed on switches 2, 3, and 4. Programming the Adaptatone Signal cessitate on-site evaluation of all The tone on switch 2 overrides the for the tone or tones selected is ac- available tones to select the most tones programmed on switches 3 and complished through setting the suitable tone. On-site volume control 4. Likewise, the tone on switch 3 switches located in the signal base. A is also available by adjusting the con- overrides the tone programmed on convenient tone selection chart is veniently located volume control in switch 4. The tone programmed on provided in the cover of each unit. In the base. switch 4 has the lowest priority and some cases the signaling task will dic- cannot override any other pro- tate the tones required. For example, Priority Tone Operation grammed tone. if a paging function is to be per- For Adaptatone signals that have formed one of the unique percussive priority capability, the programmed tones (Chime1 or Chime 2) may be tones operate on a pyramid-type pri- most suitable. Local regulations or Standard & Div. 2 Hazardous Location dB Ratings at 10 Ft.* Standard High Tone Description Volume Volume Ding-Dong Percussive pairs of 700 and 570 Hz tones, 106 109 each damped to zero Warble 575 and 770 Hz alternately, 87 ms each 106 109 Siren 600-1250 Hz up and down sweep in 8 seconds and repeat 110 114 Stutter Percussive 470 Hz, 83 ms on, 109 ms off 103 106 Slow Whoop 600-1250 Hz upward sweep in 4 seconds and repeat 110 114 Beep 470 Hz, 0.55 seconds on, 0.55 seconds off 103 106 Chime 1 700 Hz percussive repeat at 1 Hz 106 109 Fast Whoop 600-1250 Hz upward sweep in 1 second and repeat 110 114 Hi/Lo 780 to 600 Hz alternately, 0.52 seconds each 106 109 Rapid Siren 600-1250 Hz up and down sweep in 0.25 seconds and repeat 110 114 Yeow 1250-600 Hz downward sweep in 1.6 seconds and repeat 110 114 Horn 470 Hz continuous 103 106 Air Horn 370 Hz continuous 106 109 Dual Tone 450-500 Hz, 0.4 to 0.5 second cycle 103 106 Chime 2 575 Hz percussive repeat at 1 Hz. 106 109 3 Pulse Horn 470 Hz, 3 0.5 second pulses separated by 0.5 seconds 103 106 followed by a 1.5 second delay and repeat 3 Pulse 370 Hz, 3 0.5 second pulses separated by 0.5 seconds 106 109 Air Horn followed by a 1.5 second delay and repeat 3 Pulse 450-500 Hz, 0.4 to 0.5 second cycle, 3 0.5 second pulses sepa- 106 109 Dual Tone rated by 0.5 seconds followed by a 1.5 second delay and repeat 3 Pulse 575 Hz, 3 0.5 second pulses separated by 0.5 seconds 103 106 Chime 2 followed by a 1.5 second delay and repeat. *Ratings taken in an anechoic chamber with signal volume control set at maximum and measurements made on an "A" weighted scale with peak hold. © 2000 EDWARDS 4-64 CHESHIRE, CT 06410 Fax-on-Demand # 1131 www.edwards-signals.com Hazardous, Process Electronic Visual NEMA & Control Signals Signals IP Definitions Signals