Elite.Parts chervon right Manufacturers chervon right E chervon right EASY BRAID chervon right OS2-D-100
About product Datasheet FAQ

EASY BRAID OS2-D-100

Description

BRAID NO-CLEAN BLUE .100" X 100"

Part Number

OS2-D-100

Price

Request Quote

Manufacturer

EASY BRAID

Lead Time

Request Quote

Category

PRODUCTS - O

Datasheet

pdf file

9644355_1.pdf

89 KiB

Extracted Text

Material Safety Data Sheet One Step (No Clean) 1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND OF THE COMPANY / UNDERTAKING. Page 1 of 4 1.1 Identification of substance (as per label): One Step Desoldering Braid Other means of Identification: 1.2 Company Name: Easy Braid Co. Part Numbers: OS-A-5, OS-A-5AS, OS-A-10, OS-A-10AS, OS-A- Contact Name: Jim Strempke 25, OS-A-50, OS-A-100, OS-A-500, OS-B-5, OS-B-5AS, OS-B-10, Full Address: 11543 K-tel Drive OS-B-10AS, OS-B-25, OS-B-50, OS-B-100, OS-B-500, OS-C-5, Minneapolis, MN 55343 USA OS-C-5AS, OS-C-10, OS-C-10AS, OS-C-25, OS-C-50, OS-C-100, Telephone Number: 952-929-3040 OS-C-500, OS-D-5, OS-D-5AS, OS-D-10, OS-D-10AS, OS-D-25, Fax Number: 952-929-2765 OS-D-50, OS-D-100, OS-D-100AS, OS-D-500, OS-E-5, OS-E- Emergency Number: 5AS, OS-E-10, OS-E-10AS, OS-E-25, OS-E-50, OS-E-100, OS-E- 100AS, OS-E-500 2. COMPOSITION / IDENTIFICATION ON INGREDIENTS CAS INGREDIENTS % SYMBOLS RISK NUMBER PHASE 7440-50-8 Pure Copper Metal 99.9 8050-09-7 Modified Rosin 0.1 2.1 Substances presenting a health hazard: The 0.1% Rosin may cause allergic reactions: does not contain hazardous ingredients. 2.2 Exposure Limit Values: Copper - ACGIH TLV 2.3 Is substance is confidential - indicate chemical nature to -fume 0.1mg/m3 ensure safe handling -dust 1.0mg/m3 3. HAZARDS IDENTIFICATION 3.1 Critical Hazards: HMIS Hazard Rating: 0 = insignificant 1 = slight 2 = moderate 3 = high 4 = extreme 3.2 Critical Hazards to Man & Environment: Health = 1 Flammability = 0 Reactivity = 0 Adverse Human Health Effects and Symptoms: Rosin flux may cause an allergic reaction, resulting in a skin rash. Clean hands after use. 4. FIRST AID MEASURE 4.1 Skin Contact: Flush skin with copious amounts of water. -First Aid: -Symptoms: Rash. -Effects: -Delayed Effects: -Medical Attention Needed: Eye Contact: Remove metal fragments and flush eyes with water. -First Aid: -Symptoms: -Effects: -Delayed Effects: -Professional Attention Needed: Inhalation: -First Aid: Remove to fresh air. If breathing has stopped, administer CPR. -Symptoms: -Effects: -Delayed Effects: -Professional Attention Needed: Ingestion: -First Aid: Induce vomiting. -Symptoms: -Effects: -Delayed Effects: Wire strands could cause internal digestive tract bleeding. -Professional Attention Needed: Induce vomiting. © 1998, EASY BRAID CO., PROD-4014, Revision A, 15 May 2006 Page 2 of 4 5. FIRE FIGHTING MEASURES 5.1 Suitable Extinguishing Media: Powder Dolomite, Sodium Chloride or Graphite. 5.2 Unsuitable Extinguishing Media: Do not use water. 5.3 Exposure Hazards: Copper reacts violently with C2H2, NH4N03, Bromates, Chlorates, Iodates, C12, C1F2, Ethylene Oxide, F2, H2O2, Hydrazine monoitrate, Hydrazoic acid, H2S, K202, NaN3, Na202, CUN03, S. 5.4 Combustion Products: Carbon Monoxide, Aliphatic Aldehydes, and Acids -Resulting Gases: 5.5 Protective Equipment For Firefighters: Not Needed 6. ACCIDENTAL RELEASE MEASURES 6.1 Personal Precautions: o -Ignition sources? When subjected to temperatures over 180 F, flux fumes should be -Provision for sufficient ventilation? vented. -Control of dust? See Section 8.1. -Prevention of skin contact? Vacuum or sweep up and dispose of as a non-cumbustable metal. -Prevention of eye contact? Gloves not normally required. When clipping short lengths, 6.2 Environmental Precautions: protective eyewear is recommended. 6.3 Methods for Cleaning Up: 6.4 Materials not to be Used for Cleaning Up: Vacuum or sweep up and dispose of as a noncombustible solid. See above. See section 5, of this document. 7. HANDLING & STORAGE 7.1 Handling -General Rules Store in cool, dry environment for functional purposes. -Technical Precautions for Safe Handling None required. 0 -Measures necessary to prevent airborne levels of If product is exposed to temperatures are above 180 F, use local chemical being generated as a result of handling. ventilation. 7.2 Recommended Storage Conditions -List incompatible materials -Quantity Limits for storage See sections 5 & 2 of this document. -Special Requirements for proper storage of chemical 8. EXPOSURE CONTROLS / PERSONAL PROTECTION 8.1 System Design General mechanical or local hood. Ventilation is recommended for 0 (e.g. Fume Hoods, Ventilated applications where the product will exceed 180 F. Cabinets, Enclosure) 8.2 Control Parameters -Limit values or biological standards: 8.3 Recommended Monitoring Procedures: See Section 5, of this document. 8.4 Personal Protection Use local or general ventilation away from the operator if the 0 -Respiratory Protection: product temperature is exposed to 180 F+. -Hand Protection: Gloves may be used if resin is a skin irritant. -Eye Protection: Eye protection should be worn when clipping short lengths. -Skin Protection: See hand protection. 8.5 CEN standards Carcinogens < 0.1% © 1998, EASY BRAID CO., PROD-4014, Revision A, 15 May 2006 Page 3 of 4 9. PHYSICAL AND CHEMICAL PROPERTIES 9.1 Appearance: Copper metallic braid with fine crystalline resin layer. 9.2 Odor: None. 9.3 pH: N/A 9.4 Boiling Point: 1981 degrees F 9.5 Melting Point: 1949 degrees F 9.6 Flash Point: No flash 9.7 Flammability (solid gas): None 9.8 Autoflammability: None 9.9 Explosive Properties: None 9.10 Oxidizing Properties: Copper can oxidize if prolonged exposure in moist conditions. 9.11 Vapor Pressure: N/A 9.12 Relative Density: N/A 9.13 Solubility: -Water Solubility Negligible -Fat Solubility Unknown 9.14 Partition coefficient, n-octanol/water: 9.15 Other Data: -Safety Parameters N/A -Vapor Density N/A -Miscibility N/A -Evaporation rate N/A -Conductivity Copper is very conductive. -Viscosity A solid 10. STABILITY AND REACTIVITY 10.1 Stability Stable 10.2 Conditions to avoid -Effects 10.3 Materials to Avoid -Effects 10.4 Hazardous Decomposition products -the need for and the presence of stabilizers: Hazardous environment can occur in the presence of excessive -hazardous exothermic reaction: heat and/or chemicals as listed in Section 5, this document. -change in appearance in the substance: -hazardous products formed upon contact with water: -possible degradation to unstable products: 11. TOXICOLOGICAL INFORMATION 11.1 Skin Exposure: -Symptoms: Possible allergic rash reaction. See Section 4, this document. -Immediate Effects: -Delayed Effects: -Chronic Effects: -Special Health Effects: 11.2 Eye Contact: -Symptoms: Possible danger of metal fragments. See Section 4, this document. -Immediate Effects: -Delayed Effects: -Chronic Effects: -Special Health Effects: 11.3 Inhalation: -Symptoms: 0 -Immediate Effects: If product is exposed to temperatures in excess of 180 F, local -Delayed Effects: ventilation must be used. -Chronic Effects: -Special Health Effects: 11.4 Ingestion: -Symptoms: -Immediate Effects: May be moderately irritating to stomach lining. Induce vomiting if -Delayed Effects: conscious. -Chronic Effects: -Special Health Effects: © 1998, EASY BRAID CO., PROD-4014, Revision A, 15 May 2006 Page 4 of 4 12. ECOLOGICAL INFORMATION 12.1 Mobility Not applicable. -distribution to environmental compartments -surface tension -absorption / desorption -physical & chemical properties 12.2 Degradability Not applicable. -biotic and abiotic degradation -acrobic and anaerobic degradation -persistence 12.3 Accumulation Not applicable. -bioaccumulation potential -biomagnification 12.4 Short and Long Term Effects on: Not applicable. -Ecotoxity -aquatic organisms -soil organisms -plants and terrestrial animals -Other Adverse Effects -ozone depletion potential -photochemical ozone creation potential -effects on waste water treatment plants 13. DISPOSAL CONSIDERATIONS 13.1 Safe Handling Consult with local regulatory bodies to metallic solid waste disposal 13.2 Methods of Disposal 14. TRANSPORT INFORMATION 14.1 UN Number: Harmonized Tariff Code: #7413.00.1000 14.2 Road & Sea Freight Classification: Copper wire coated with resin flux 14.3 Substance Classification Number: 14.4 Class: 14.5 Packing Group: Validated license # / General license symbol: "NLR" 14.6 Proper Shipping Name: PGR (if applicable) 14.7 ADR/RID CLASSIFICATION: Class: Item Number: 14.8 ICAO/IATA CLASSIFICATION: Class: Sub-Risk: Packing Group: Proper Shipping Name: 15. REGULATORY INFORMATION 15.1 Precautionary Label Information: This product does not require warning labels due to Hazards 15.2 Symbols: Classification as designated in Section 3. 15.3 Risk Phrases: Risk Phrases: R36/37/38 15.4 Safety Phrases: Safety Phrases: S14 (per section 5), S22/39, S43 (per section 5) 16. OTHER INFORMATION 16.1 Regulatory Information: © 1998, EASY BRAID CO., PROD-4014, Revision A, 15 May 2006

Frequently asked questions

What makes Elite.Parts unique?

chervon down
At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

What kind of warranty will the OS2-D-100 have?

chervon down
Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Which carriers does Elite.Parts work with?

chervon down
Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Will Elite.Parts sell to me even though I live outside the USA?

chervon down
Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

I have a preferred payment method. Will Elite.Parts accept it?

chervon down
All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

Why buy from GID?

quality

Quality

We are industry veterans who take pride in our work

protection

Protection

Avoid the dangers of risky trading in the gray market

access

Access

Our network of suppliers is ready and at your disposal

savings

Savings

Maintain legacy systems to prevent costly downtime

speed

Speed

Time is of the essence, and we are respectful of yours

What they say about us

FANTASTIC RESOURCE

star star star star star

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

star star star star star

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

star star star star star

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

star star star star star

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

star star star star star

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

star star star star star

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Related Products

BRAID NO-CLEAN SILVER .025"X 10"

BRAID NO-CLEAN SILVER .025"X100"

BRAID NO-CLEAN SILVER .025"X 25"

BRAID NO-CLEAN SILVER .025" X 5"

BRAID NO-CLEAN ANTIST .025 X 5

BRAID NO-CLEAN GOLD .050" X 10"