2U Low Profile Platform FTS218 • Embedded Celeron or Single/Dual Pentium III FC-PGA Processor up to 1 GHz • Intel 440GX Chipset with 66/100MHz FSB • Up to 1.5GB of SDRAM • AGP Video • Dual 10/100 Base-TX Ethernet • Dual Channel EIDE • Slim Floppy, 2 Serial, 1 Parallel, and 2 USB Ports • System Monitor • 4 Full Length, 1 Half Length 32-Bit / 33MHz PCI and 1 Shared PCI/ISA Slot • Support for 1 Slim Floppy and 1 Slim CD-ROM Drive • 3.5"H(2U) x 19"W x 17.7"D SPECIFICATIONS: DRIVE SUPPORT PROCESSOR ® • Single or Dual Intel Pentium III • (1) 3.5” Micro Floppy Drive Bay • (1) Micro CD-ROM Drive Bay • (100 or 133 MHz Front Side Bus) • (2) 3.5”, Front Accessible Drive Bays MEMORY POWER SUPPLY • Up to 4 GB Using PC-100 or PC-133 SDRAM 230 Watt, -48V DC Input BIOS • DTI Enhanced Phoenix Core • -48V DC 5V @ 30A Combined 3.3V @ 20A Max. 220W 12V @ 14A INTERFACES 230 Watts • PCI Video - C&T 69030 (front and rear connections) -12V @ 0.5A -5V @ 0.5A • Ethernet - Two Intel 82559 NICs, Rear • EIDE - Two Channels, ATA-33 5VSB @ 1A • Front: PS/2 Keyboard, Mouse, USB, Video (optional) COOLING • Rear: PS/2 Keyboard or Mouse, USB, Video, Alarm • Rear Optional: PS/2 Mouse and Serial (occupies 1 slot) • Single Fan for Card Cage • Power Supply Fans are Self Contained Serial and Parallel (occupies 1 slot) STATUS INDICATORS DIMENSIONS • 3.47”H x 19”W x 17.7”D Major and Minor Fault Indicators for: • Temperature • Fans • Voltages EXPANSION SLOTS • 4 Full Length 64 bit/66MHz PCI Slots (EMB012) • 4 Full Length + 1 Half Length 32 Bit / 33MHz PCI Slots and 1 Half Length ISA Slot (EMB002) www.dtims.com Rev. 1.2 1.800.443.2667 September 2, 2004 All trademarks and tradenames are the property of their respective owners. FTS218 2U Low Profile Platform Top Open 17” 4 PCI Cards Power Supply 3.47” Processor Board Drives 17.7” Fan 19” The FTS218 is a fully integrated platform ide- Other interfaces in the FTS218 include USB, planes for the CRM120A and FTS218, thus pro- ally suited for situations where high performance EIDE, floppy, serial, parallel, keyboard, and viding 7 amps per PCI slot. This allows all of the in a minimal amount of rack space is desired. mouse ports. The two channel EIDE interface 3.3 volt current from the power supply to be used The FTS218 provides the integrator with an supports up to four devices which can operate in by the core logic and memory on the main board. abundance of features while still allowing for a fast PIO and DMA modes. The floppy interface The FTS218 chassis includes a power supply, large number of expansion slots. supports one drive. The serial and parallel port drive bays, and cooling fans. The power supply The FTS218 is built around a processor board connections are available at the rear of the is available with DC power input. The drive bays ® capable of running Intel's Pentium III CPUs in FTS218. The keyboard, mouse, and USB ports are all front accessible and include two 3.5 inch, ® the FC-PGA package. The Pentium III processor are available at the front and rear of the chassis. one micro CD-ROM, and one micro floppy bay. is supported in a single or dual CPU configura- An optional solid state disk interface allows for Separate cooling fans for the card cage and tion. This allows the FTS218 to effectively serve operation without rotating media. power supply help ensure reliable operation in cost sensitive applications as well as very high The FTS218 provides system monitoring and harsh environments. Front panel interfaces performance applications. The FTS218 operates security features. A dedicated microcontroller include the keyboard, mouse, video, and USB at either 100 or 133 MHz front side bus speeds. tracks voltages, fan speeds, and processor tem- connectors, status indicator LEDs, a reset switch, The FTS218 supports up to 4 GB of memory. On peratures. Multi-level alarms can be set to trig- and a power switch. A snap-on filter holder is the EMB012, four DIMM sockets are provided ger based on selectable tolerances. Alarms can located on the front of the unit for easy accessi- and can be populated with standard PC-133 be reported externally or to the host processor. A bility. Rear panel connections include video, SDRAM memory modules. two-stage watchdog timer is also implemented to mouse, keyboard, parallel, and serial ports. Dry- The FTS218's full compliment of integration automatically recover from software lockups. contact relay closures are also provided for exter- includes an PCI video interface. The C&T 69030 Expandability of the FTS218 far exceeds what nal monitoring of alarm conditions. graphics engine is designed into the FTS218 to is found in the typical 2U rack-mount platform. provide full featured video with minimal power The FTS218 includes four full length PCI slots consumption. The C&T 69030 includes 4 MB of (64 Bit / 66Mhz for the EMB012). It also sup- video memory. ports a 1/2 length PCI and ISA card with the The FTS218 includes two Intel 82559 Ethernet EMB002 (PCI cards are 32 Bit / 33MHz). NICs. Both ports can operate at 10 or 100 Mbps Many low profile systems do not provide All products are shipped FOB factory (MS). over CAT-5 cable and are fully auto-negotiating. ample current on the 3.3 volt rail to support high Specifications subject to change without notice. Full and half duplex modes are supported. performance PCI cards along with the core logic Trademarks are the property of their respective owners. (C) Copyright 2004 by Diversified Technology, Inc. Device drivers are available for most popular and a large memory array. DTI has solved this All rights reserved. operating systems. problem by generating 3.3 volts on the back- www.dtims.com 1.800.443.2667 476 Highland Colony Parkway • Ridgeland, MS 39157