® ™ Datasheet Dialogic Vision 1000 Video Gateway ® ™ The Dialogic Vision 1000 Video Gateway is a carrier-ready video gateway that can connect interactive SIP-based video and multimedia services to mobile, IP, and PSTN networks, in addition to IMS-based networks through support of BICC/ Nb-Up. The Vision 1000 Video Gateway can also support real- time video and voice transcoding, allowing service providers and mobile operators to deliver enhanced video quality and interoperability for converged services, such as video portals, multimedia contact centers, and multi-terminal video conferencing. Because of its ability to integrate ISDN and SS7/ISUP signaling in a single 1U unit and scale up to 5000 ports per SS7 point code, the Vision 1000 Video Gateway allows for extremely efficient deployment. It features web-based management with remote configuration, management, and monitoring, and easy scalability in carrier networks by permitting capacity upgrades Large Logo through software licenses. Support of redundant SS7 links improves reliability by reducing service downtime. Features Benefits 3G-324M support that includes H.264 Enables the same video services to perform comparably on 3G wireless and IP networks Real-time any-to-any video transcoding and rate adaptation Adapts codec, rate, and size dynamically as a video moves on demand between mobile network devices and IP network devices to improve efficiency and the viewer experience Video refresh Reduces video corruption while maintaining a high frame rate FastCall setup that includes MONA Allows similar setup times for both video and voice calls Simultaneous support of TDM voice calls Supports seamless failover of video to voice calls with very low voice latency to eliminate complex routing schemes and multiple element management Medium Logo Redundant SS7 link support Improves reliability by reducing service downtime, which is important in a carrier environment BICC/Nb-Up support Can be deployed in both traditional mobile networks and next-generation IMS networks To find out more about Dialogic call 800.755.4444 or visit us at: www.dialogic.com Small Logo ® ™ Datasheet Dialogic Vision 1000 Video Gateway Network Services Applications • Business Productivity Mobile Interactivity — Multimedia Contact Center • Personalization — Self Service IVVR and IVR — Video Ring Tones and CRBT — Video and Voice Conferencing — Video, Voice, and Text SMS Network Infrastructure — Video and Voice Chat — Video Avatar Messaging — Mobile-to-PC video telephony — Video and Voice Messaging — Video Call Completion to Voice (VCCV) — Video Mail • Entertainment — Video Portal — On-Demand Gaming • Information — Stock Quotes — News — Video Sharing — Video-Based Training — Video Blogging — Video Portal Connections for a Wide Variety of Network Types Figure 1 provides an example of how the Vision 1000 Video Gateway can connect voice and video endpoints to SIP-based multimedia platforms and services in carrier environments. With integrated PSTN-SIP audio and video, the Vision 1000 Gateway can provide a wide range of carrier signaling services, making it suitable for a variety of network types, including IP, Mobile, PSTN, 3G-324M, and IMS networks. With its ability to provide real-time bi-directional transcoding, the Vision 1000 Gateway enables dynamic and efficient deployment of 3G services, including SIP-based video applications, speech, and multimedia services, as well as emerging 3G-324M video solutions. 3G Radio Access Mobile Operator / VAS Provider 3G-324M Network – Node B 3G Core Network Private IP Network Voice/Video Handset Third Party Home Service Application Server Location Delivery Register Platform (HLR) Base Station SS7 Subsystem Audio/Video Media ISUP / SIP Content Server SIGTRAN RTP RTSP Dialogic or ® ™ Radio Network Mobile Switch Dialogic Vision Third Party Controller (RNC) Controller (MSC) 1000 Video Gateway Media Server 3G-324M 64 kbps channels over ISDN ® ™ Figure 1: Dialogic Vision 1000 Video Gateway in a Carrier Network Environment 2 ® ™ Datasheet Dialogic Vision 1000 Video Gateway One Gateway for Both Voice-Only and Video Calls The Vision 1000 Video Gateway can simultaneously support voice-only calls and 3G-324M video calls, and can supply only the audio portion of a video call to a non-video enabled endpoint. This enables application developers, OEMs, and system integrators to quickly develop and deploy rich multimedia solutions without complex routing, and allows the Vision 1000 Gateway to work with both 2G and 3G mobile networks and endpoints. Simultaneously supporting voice-only and video calls is also important for mobile providers, for whom a top priority is to satisfy their video subscribers by making sure that all attempted calls are completed, even if the destination handset type is voice-only. The Vision 1000 Video Gateway provides an advantage in these cases by handling both types of calls on a single gateway without requiring any conversion. The audio call remains in the TDM domain, eliminating potential latency and providing a high quality voice connection. This functionality is provided in a single 2U unit, a very small footprint for such rich functionality. Real-Time Any-to-Any Video Transcoding The Vision 1000 Video Gateway offers excellent efficiency and an enhanced viewer experience by providing real-time any-to-any video transcoding only when needed. Rate matching and size matching of video streams is available on demand, and video transcoding capabilities include H.264 to H.263/MPEG-4 for interoperability between web-based video content and mobile video handsets. Table 1 lists the dynamic video transcoding available with the Vision 1000 Video Gateway. Video Service 3G-324M Mobile SIP Video Phone 3GPP Stored IP Video Streaming 2G/3G Non-Video Video Handset (QCIF/CIF) Content (QCIF) (QCIF/CIF) Handset (QCIF) (audio only) H.264 x x x x x 3G-324M Mobile Video MPEG-4 x x x x x Handset H.263 x x x x x Table 1. Video Transcoding Supported The Vision 1000 Video Gateway also enables a high-quality 3G video experience by incorporating advanced standards in mobile video technology. The Vision 1000 Gateway supports H.264 for high-quality video as well as industry-standard fast call setup procedures such as MONA, WNSRP, and Packed245. Signaling for the Carrier Network With its support of ISDN, SS7/ISUP, SIGTRAN, and BICC signaling, the Vision 1000 Video Gateway is ready for deployment in a wide variety of carrier environments. Trial, test, or small-scale deployments can begin with only 1U of rack space, The Vision 1000 Video Gateway can accommodate initial commercial deployments in carrier environments, which normally require fault-tolerance, because it can provide 1+1 redundancy through a single point code with two units for increased reliability. From such an initial deployment, the Vision 1000 Gateway scales easily to 10 units and 5000 ports — with redundancy. Note: Number of units and ports may differ depending on call flow and use case. 3 ® ™ Datasheet Dialogic Vision 1000 Video Gateway Figure 2 provides an example of a full-scale, high-density, redundant deployment using Vision 1000 Video Gateways. ® ™ Dialogic Vision 1000 Video Gateway ISUP/SIGTRAN Links 8 T1/E1 Bearer Mobile SS7 Switch Active/Standby Controller (MSC) ISUP/SIGTRAN Links 8 T1/E1 Bearer Service SIP Delivery RTP Platform 16 T1/E1 Bearer Scales up to 10 Units* 16 T1/E1 Bearer * Number of units and ports may differ depending on call flow and use case. Figure 2. Full-Scale SS7 Deployment 4 ® ™ Datasheet Dialogic Vision 1000 Video Gateway Technical Specifications Video Gateway Support 3GPP-324M H.223, Annex B (Level 2) H.245 ver 11 H.263, H.263+ MPEG-4 part 2 H.264 (MPEG-4 part 10) Fastcall Setup H.324 Annex A, C (CCSRL/NSRP/WNSRP) H.324 Annex K (MONA APC & MPC) Audio processing Passthrough and transcoded AMR-NB, G.711 transcoding for video calls User Indications H.245 UII RFC 2833 In-band DTMF Video Transcoding H.263, H.263+, MPEG-4 part 2, H.264 Video Rate adaptation 42Kb to 384Kb, 6fps to 30 fps Video Size adaptation QCIF, CIF Video Refresh RFC 5168 Audio Gateway Support Audio Processing Passthrough and transcoded AMR-NB, G.711, G.723.1, G.729a transcoding User indications RFC 2833 In-band DTMF Fax support Incoming fax detection on CNG, T.38 transport Call Routing DNIS to URI mapping Configurable route table CCXML 1.0 W D June 29, 2005 compliant Call transfer (REFER) Call bridging between audio and/or video calls Video call tromboning Early Media (3G-324M requires switch support) 5 ® ™ Datasheet Dialogic Vision 1000 Video Gateway Technical Specifications (continued) Media Transport RFC 1889 (RTP/RTCP) RFC 1890 (RTP profiles) RFC 3550/3551 (RTP) RFC 2833 (DTMF) RFC 2429, RFC 2190 (H.263) RFC 3267/IF2 (AMR) RFC 3016 (MPEG-4) RFC 3984 (H.264) Nb-Up (for BICC/IP-324M) Network Protocols ISDN ISUP/SS7 ISUP/SIGTRAN BICC SIP (interworking with ISDN/ISUP/BICC) SS7/ISUP Compliance Embedded SS7 support per server Redundant support through external SS7 signaling server Technology deployed in over 50 countries China ISUP EN 300-356-1, ETSI ISUP V.3, 1998 ETS 300-121, ETSI ISUP V.1, 1992 ETS 300-356-1, ETSI ISUP V.2, 1995 ETS 300-356-33, ETSI Q.730-737, ITU-T, 1992 Q.761-764, ITU-T, 1997 Q.767, ITU-T, 1992 Q.784, ITU-T, 1996-1997 T1.113, 236, ANSI, 1995 NTT Q.761-764 SIGTRAN Compliance M3UA (RFC 4666, ETSI TS 102 381 v1.1.1) SCTP (RFC 2960, RFC 3309) BICC Compliance ITU-T Q.1902.1 – Q.1902.6, 07/2001 ANSI T1.673-2000 ANSI T1.673-2002 (CS1+) Paired with media supported: Nb-Up (IP-324M) 6 ® ™ Datasheet Dialogic Vision 1000 Video Gateway Technical Specifications (continued) ISDN Compliance AT&T 5ESS10 Nortel DMS-100 Bellcore National 2 Euro ISDN and Euro Numbers NTT INS 1500 QSIG ANSI T1.607 SIP Compliance RFC 3261 (SIP core) RFC 3263 (Locating SIP Servers) RFC 3264 (SDP Offer/Answer) RFC 3515 (REFER) RFC 3398 (ISUP/SIP mapping) RFC 2327 (SDP) RFC 2976 (INFO) RFC 5168 (Video Refresh) PSTN Physical Interfaces 8 or 16 T1/E1 trunks T1: ANSI T1.102, T1.403 E1: G.703 2,048 kbps MDO mini-RJ21 connector (per 8 trunks) 120 ohm termination or 75 ohm (optional) SS7 Physical Interfaces (optional) 4 T1/E1 trunks, with or with voice channels RJ-48C connectors, each with 2 T1/E1 trunks 4, 16, or 32 low speed links, or 4 high speed links (DS1) 120 ohm termination or 75 ohm (optional) IP Media Physical Interfaces Dual Gigabit Ethernet per 8 T1/E1 trunks Dual Gigabit Ethernet per SS7 signaling card Quad Gigabit Ethernet per server motherboard Configurable for failover or load balanced Management Web management console Usage indication: CDR reporting Front panel visual, info/minor/major/critical SNMP v1/v2/v3 Lights out management, IPMI 2.0 compliant Detailed event logging with configurable levels 7 ® ™ Datasheet Dialogic Vision 1000 Video Gateway Technical Specifications (continued) Physical Specifications Height 1.74 in (44 mm) Width 19 in (485 mm) ear-to-ear Depth 20.75 in (527.05 mm) Weight 26.80 lbs (12.16 kg) Environmental 0ºC to 40ºC operating -40ºC to 70ºC non-operating Mounting 1U, 19” rack mount (600 mm standard telcom rack) Optional rack mount kit available (22” – 30.5”, 4-post rack only) Optional SEP (Signal Entry Panel) Passive convertor from mini-RJ21 to RJ-48C For PSTN interfaces, up to 16 T1/E1 trunks Height: 1.74 in (44 mm) Width: 19 in (485 mm) ear-to-ear Depth: 1.91 in (48.5 mm) Weight: 2.6 lbs (1.18 kg) Environmental: 0ºC to 40ºC operating -40ºC to 70ºC non-operating Hardware Availability Dual RAID 1 disks, hot swappable, front accessible Dual 1+1 power supply, with dedicated fans, hot swappable, rear accessible Quad fan subsystem for CPU and network cards, hot swappable, front accessible Redundant network connections Power Dual 650 W AC Dual 650 W DC Capacity VoIP gateway ports 480 (may be fewer depending on the number of 324M ports) 324M video gateway ports 240 Video transcoding ports Up to 240 full-duplex, any-to-any (capacity depends on codec, frame rate, bit rate, and size) Capacity upgrade through software license Approvals, Standards, and Compliance Hazardous substances: RoHS Compliance Information at http://www.dialogic.com/rohs Compliance Safety, EMC, Telco, NEBS-3/ETSI-designed May be approved as AQR1U, AQR1UA or AQR1UB 8 Large Logo Medium Logo Small Logo www.dialogic.com Dialogic Corporation 9800 Cavendish Blvd., 5th floor Montreal, Quebec CANADA H4M 2V9 Dialogic and Vision are either registered trademarks or trademark of Dialogic Corporation. Dialogic’s trademarks may be used publicly only with permission from Dialogic. Such permission may only be granted by Dialogic’s legal department at the address provided above. The names of actual companies and products mentioned herein are the trademarks of their respective owners. Dialogic encourages all users of its products to procure all necessary intellectual property licenses required to implement their concepts or applications, which licenses may vary from country to country. None of the information provided in this datasheet other than what is listed under the section entitled Technical Specifications forms part of the specifications of the product and any benefits specified are not guaranteed. No licenses or warranties of any kind are provided under this datasheet. Dialogic may make changes to specifications, product descriptions, and plans at any time, without notice. This document discusses one or more open source products, systems and/or releases. Dialogic is not responsible for your decision to use open source in connection with Dialogic products (including without limitation those referred to herein), nor is Dialogic responsible for any present or future effects such usage might have, including without limitation effects on your products, your business, or your intellectual property rights. Any use case(s) shown and/or described herein represent one or more examples of the various ways, scenarios or environments in which Dialogic products can be used. Such use case(s) are non-limiting and do not represent recommendations of Dialogic as to whether or how to use Dialogic products. Aspects of one or more products mentioned herein are made and sold under license from Dilithium Networks, Inc. Copyright © 2010 Dialogic Corporation All rights reserved. 09/10 11279-05