Datasheet JCT Media Board ® Dialogic VFX/41JCT-LS Media Board ® The Dialogic VFX/41JCT-LS Media Board is a four-port analog converged communications board that can be used by developers to provide global enterprise applications, such as uniŢed messaging, Interactive Voice Response (IVR), and contact centers. The VFX/41JCT-LS supports voice, fax, and software-based speech recognition processing in a single PCI or PCI Express slot, providing four analog telephone interface circuits for direct connection to analog loop start lines. Features Benefits Supports up to four channels of enhanced onboard fax Reduces the number of boards per system Supports Continuous Speech Processing (CSP) Provides a ţexible speech processing technology, which when coupled with efŢcient drivers, ofţoads critical real-time signal processing in speech-enabled applications to onboard DSPs. Reduces system latency, increases recognition accuracy, and improves overall system response time for high-density speech solutions. Separate models available with Universal PCI or PCI Express Universal PCI form factor compatible with 3.3 V and 5.0 V bus edge connector signals, enabling deployment in a wide variety of PCI chassis from popular manufacturers; PCI Express form factor compatible with 1x slots (x1 or higher compatible) also available A-law or µ-law voice coding at dynamically selectable data Allows for optimal tradeoff between disk storage and voice rates, 24 kb/s to 64 kb/s, selectable on a channel-by-channel quality basis Telcordia CLASS, UK CLI, Japanese Caller ID, and other Supports an international Caller ID capability via on-hook audio international protocols path Advanced outbound call progress analysis Monitors outgoing call status quickly and accurately ® Datasheet Dialogic VFX/41JCT-LS Media Board Technical Specifications Number of ports 4 Maximum boards per system 8 CT Bus loads per board 1 Maximum CT Bus loads per system 20 Analog network interface 4 onboard loop start interface circuits Resource sharing bus CT Bus H.100 Control processor 80C186 @ 34.8 MHz Digital signal processor Freescale DSP56303 @ 100 MHz, with 128Kx24 private SRAM ® Supported operating systems Linux: SR6.1 SU 232 or higher; Windows : SR 6.0 SU 131 or higher. Details at http://www.dialogic.com/systemreleases CSP Yes Signaling Analog loop start Host Interface — PCI and PCI Express Bus compatibility PCI and PCI Express PCI Bus speed 33 MHz maximum PCI Bus mode Target mode operation only Shared memory 32 KB page I/O ports None Platform — PCI and PCI Express Form factor PCI Universal or PCI Express 12.3 in. (31.24 cm) long without edge retainer or 13.3 in. (33.78 cm) long with edge retainer 0.79 in. (2 cm) wide (total envelope) 3.87 in. (9.83 cm) high (excluding edge connector) Power Requirements — PCI +5 VDC 750 mA maximum +12 VDC 200 mA maximum –12 VDC 100 mA maximum Power Requirements — PCI Express +12 VDC 450 mA maximum Environmental Requirements — PCI and PCI Express Operating temperature +32°F (0°C) to +122°F (+50°C) Storage temperature –4°F (–20°C) to +158°F (+70°C) Humidity 8% to 80% noncondensing Telephone Interface† Trunk type Loop start Loop current range 20 mA to 120 mA Impedance 600 Ohms nominal Ring detection 15 Vrms minimum, 13 Hz to 68 Hz, (conŢgurable by parameter**) Echo return loss ConŢgurable by software parameter Crosstalk coupling Less than –70 dB at 1 kHz channel to channel Receive signal/noise ratio 70 dB referenced to –15 dBm Frequency response 200 Hz to 3400 Hz ±3 dB (transmit and receive) Connectors 4 RJ-11 type 2 ® Dialogic VFX/41JCT-LS Media Board Datasheet Technical Specifications (cont.) Approvals and Compliance Hazardous substances RoHS Compliance Information at http://www.dialogic.com/rohs Safety and EMC Canada ICES-003 Class A ULc CSA 60950-1 File E96804 Europe EN60950 EN55022 EN55024 Japan VCCI Class A United States FCC Part 15 Class A UL 60950-1 File E96804 International IEC60950-1 CISPR 22 CISPR 24 Telecom Approvals Canada IC:885 5542 A European Union DoC Japan A00-0796JP United States US:EBZUSA-75385-VM-T Country-speciŢc approvals See the Product Declarations & Global Approvals list at http://www.dialogic.com/declarations/ or contact your Authorized Distributor Reliability/Warranty Estimated MTBF Per Telcordia Method 1 PCI: 274,000 hours PCI Express: 230,000 hours Warranty Warranty Information at http://www.dialogic.com/warranties 3 ® Datasheet Dialogic VFX/41JCT-LS Media Board Springware/JCT Technical Specifications Facsimile Fax compatibility ITU-T T.4 (Group III), T.30 ETSI NET/30 compliant Data rate Transmission: 14,400 b/s (v.17) (maximum) Variable speed selection Automatic step-down to 12,000 b/s, 9600 b/s, and lower Reception: 9,600 b/s Transmit data modes API-selectable ModiŢed Huffman (MH) ModiŢed Read (MR) ModiŢed ModiŢed Read (MMR) with Error Correction Mode (ECM) Receive data modes API-selectable MH, MR, and MMR with ECM File data formats Tagged Image File Format-Fax (TIFF-F) for transmit/receive MH, MMR, and ASCII text transmit ASCII-to-fax conversion Performed on the host CPU rather than in the Dialogic Ţrmware. Supports multiple fonts and ® language character sets, including all Windows fonts Error correction Detection, reporting, and correction of faulty scan lines Image widths 1728 pixels 2048 pixels 2432 pixels Image scaling Automatic horizontal and vertical scaling among any of the three supported widths Polling modes Normal Turnaround Image resolution Normal (203 pels/in. × 98 lines/in.; 203 pels/2.5 cm × 98 lines/2.5 cm) Fine (203 pels/in. × 196 lines/in.; 203 pels/2.5 cm × 196 lines/2.5 cm) Fill minimization Automatic Ţll bit insertion and stripping Audio Signal Receive range –40 dBm to +2.5 dBm0 nominal, conŢgurable by parameter** Automatic gain control Application can enable/disable Above –18 dBm0 results in full-scale recording, conŢgurable by parameter** Silence detection –40 dBm nominal, software adjustable** Transmit level (weighted average) –9.5 dBm0 nominal, conŢgurable by parameter** Transmit volume control 40 dB adjustment range, with application-deŢnable increments and legal limit cap Frequency Response 24 kb/s 300 Hz to 2600 Hz ±3 dB 32 kb/s 300 Hz to 3400 Hz ±3 dB 48 kb/s 300 Hz to 2600 Hz ±3 dB 64 kb/s 300 Hz to 3400 Hz ±3 dB Audio Digitizing 13 kb/s GSM @ 8 kHz sampling 24 kb/s OKI ADPCM @ 6 kHz sampling 32 kb/s OKI ADPCM @ 8 kHz sampling 32 kb/s G.726 @ 8 kHz sampling 48 kb/s µ-law PCM @ 6 kHz sampling 64 kb/s µ-law PCM @ 8 kHz sampling Digitization selection Selectable by application on function call-by-call basis Playback speed control Pitch controlled Available for 24 kb/s and 32 kb/s data rates Adjustment range: ±50% Adjustable through application or programmable DTMF control 4 ® Dialogic VFX/41JCT-LS Media Board Datasheet Springware/JCT Technical Specifications (cont.) DTMF Tone Detection DTMF digits 0 to 9, *, #, A, B, C, D per Telcordia LSSGR Sec 6 Dynamic range –38 dBm to +3 dBm per tone, conŢgurable by parameter** Minimum tone duration 40 ms, can be increased with software conŢguration Interdigit timing Detects like digits with a >40 ms interdigit delay Detects different digits with a 0 ms interdigit delay Twist and frequency variation Meets Telcordia LSSGR Sec 6 and EIA 464 requirements Noise tolerance Meets Telcordia LSSGR Sec 6 and EIA 464 requirements for Gaussian, impulse, and power line noise tolerance Cut-through Local echo cancellation permits 100% detection with a >4.5 dB return loss line Talk-off Detects less than 20 digits while monitoring Telcordia TR-TSY-000763 standard speech tapes (LSSGR requirements specify detecting no more than 470 total digits) Detects 0 digits while monitoring MITEL speech tape #CM 7291 Global Tone Detection Tone type Programmable for single or dual Maximum number of tones Application-dependent Frequency range Programmable within 300 Hz to 3500 Hz Maximum frequency deviation Programmable in 5 Hz increments Frequency resolution ± 5 Hz. Separation of dual-frequency tones is limited to 62.5 Hz at a signal-to-noise ratio of 20 dB. Timing Programmable cadence qualiŢer, in 10 ms increments Dynamic range Programmable, default set at –6 dBm0 to +3 dBm0 per tone Global Tone Generation Tone type Generate single or dual tones Frequency range Programmable within 200 Hz to 4000 Hz Frequency resolution 1 Hz Duration 10 ms increments Amplitude –43 dBm0 to –3 dBm0 per tone, programmable MF Signaling MF digits 0 to 9, KP, ST, ST1, ST2, ST3 per Telcordia LSSGR Sec 6, TR-NWT-000506 and ITU-T Q.321 Transmit level Complies with Telcordia LSSGR Sec 6, TR-NWT-000506 Signaling mechanism Complies with Telcordia LSSGR Sec 6, TR-NWT-000506 Dynamic range for detection –25 dBm0 to +3 dBm0 per tone Acceptable twist 6 dB Acceptable freq. variation Less than ±1 Hz Call Progress Analysis Busy tone detection Default setting designed to detect 74 out of 76 unique busy/congestion tones used in 97 countries as speciŢed by ITU-T Rec. E., Suppl. #2 Default uses both frequency and cadence detection Application can select frequency only for faster detection in speciŢc environments Ring back detection Default setting designed to detect 83 out of 87 unique ring back tones used in 96 countries as speciŢed by ITU-T Rec. E., Suppl. #2 Uses both frequency and cadence detection Positive voice detection accuracy >99% based on tests on a database of real world calls in North America Performance in other markets may vary Positive voice detection speed Detects voice in as little as 1/10th of a second Positive answering machine detection accuracy >85% based on application and environment Fax/modem detection Preprogrammed 5 ® Datasheet Dialogic VFX/41JCT-LS Media Board Springware/JCT Technical Specifications (cont.) Call Progress Analysis (cont.) Intercept detection Detects entire sequence of the North American tri-tone Other intercept tones sequences can be programmed Dial tone detection before dialing Application enable/disable Supports up to three different user-deŢnable dial tones Programmable dial tone drop out debouncing Tone Dialing DTMF digits 0 to 9, *, #, A, B, C, D per Telcordia LSSGR Sec 6, TR-NWT-000506 Frequency variation Less than ±1 Hz Rate 10 digits/s maximum, conŢgurable by parameter** Level –4.0 dBm0 per tone, nominal, conŢgurable by parameter** Pulse Dialing 10 digits 0 to 9 Pulsing rate 10 pulses/s, nominal 20 pulses/s for Japan, conŢgurable by parameter** Break ratio 60% nominal, conŢgurable by parameter** Analog Caller Identification Applicable standards Telcordia TR-TSY-000030 Telcordia TR-TSY-000031 TAS T5 PSTN1 ACLIP: 1994 (Singapore) Modem standard Bell 202 or V.23, serial 1200 bits/sec (simplex FSK signaling) Receive sensitivity –48 dBm (–50 dBv) to –1 dBm Noise tolerance Minimum 18 dB SNR over 0 to –48 dBm dynamic range for error-free performance Data formats Single Data Message (SDM) and Multiple Data Message (MDM) formats via API calls and commands Line impedance AC coupled 600 Ohm (@ 1.8 kHz) termination during Caller ID on-hook detection interval Message formats ASCII or binary SDM, MDM message content Analog Display Services Interface (ADSI) FSK generation per Telcordia TR-NWT-000030 CAS tone generation and DTMF detection per Telcordia TR-NWT-001273 Hardware System Requirements • Intel386, Intel486, or Pentium microprocessor PCI or PCI Express computer • Operating system hardware requirements vary according to the number of channels being used Additional Components • Multidrop CT Bus cables (CBLCTB68C3DROP, CBLCTB68C4DROP, CBLCTB68C8DROP, CBLCTB68C12DROP, CBLCTB68C16DROP) • CT Bus/SCbus adapter (CTBUSTOSCBUSADP) • SCbus terminator kits (1SCBUS1TERMKIT, 2SCBUS1TERMKIT, 3SCBUS1TERMKIT) 6 ® Dialogic VFX/41JCT-LS Media Board Datasheet Ordering InformationProduct Code Order Code Description Product Code Order Code Description VFX41JCTLSW 881-793 4-port Analog, Loop-Start, PCI VFX41JCTLSWEU 881-794 4-port Analog, Loop-Start, PCI, Europe VFX41JCTLSEW 887-492 4-port Analog, Loop-Start, PCIe, Europe VFX41JCTLSEWEU 887-493 4-port Analog, Loop-Start, PCIe 7 To learn more, visit our site on the World Wide Web at http://www.dialogic.com Dialogic Corporation 9800 Cavendish Blvd., 5th ţoor Montreal, Quebec CANADA H4M 2V9 INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH PRODUCTS OF DIALOGIC CORPORATION (“DIALOGIC”). NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN A SIGNED AGREEMENT BETWEEN YOU AND DIALOGIC, DIALOGIC ASSUMES NO LIABILITY WHATSOEVER, AND DIALOGIC DISCLAIMS ANY EXPRESS OR IMPLIED ® WARRANTY, RELATING TO SALE AND/OR USE OF DIALOGIC PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT OF A THIRD PARTY. Dialogic products are not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications. Dialogic may make changes to speciŢcations, product descriptions, and plans at any time, without notice. Dialogic is a registered trademark of Dialogic Corporation. Dialogic’s trademarks may be used publicly only with permission from Dialogic. Such permission may only be granted by Dialogic’s legal department located at the address given above. Any authorized use of Dialogic’s trademarks will be subject to full respect of the trademark guidelines published by Dialogic from time to time and any use of Dialogic’s trademarks requires proper acknowledgement. Windows is a registered trademark of the Microsoft Corporation in the United States and/or other countries. Other names of actual companies and products mentioned herein are the trademarks of their respective owners. Dialogic encourages all users of its products to procure all necessary intellectual property licenses required to implement their concepts or applications, which licenses may vary from country to country. None of the information provided in this datasheet other than what is listed under the section entitled Technical SpeciŢcations forms part of the speciŢcations of the product and any beneŢts speciŢed are not guaranteed. Positive Answering Machine Detection/Positive Voice Detection These performance results were measured using speciŢc computer systems and/or components within speciŢc lab environments and under speciŢc system conŢgurations. Any difference in system hardware, software design, or conŢguration may affect actual performance. The results are furnished for informational use only and should not be construed as a commitment by Dialogic. Dialogic assumes no responsibility or liability for any errors or inaccuracies. Outbound Dialing/Telemarketing Outbound dialing systems may be subject to certain laws or regulations. Dialogic makes no representation that Dialogic products will satisfy the requirements of any such laws or regulations (including, without limitation, any regulations dealing with telemarketing). ** Analog levels: 0 dBm0 corresponds to a level of +3 dBm at tip-ring analog point. Values vary depending on country requirements; contact your account manager. †Average speech mandates +16 dB peaks above average and preserves –13 dB valleys below average. Copyright © 2007 Dialogic Corporation All rights reserved. 10/07 7870-04 www.dialogic.com