Datasheet JCT Media Boards ® Dialogic JCT Media Boards ® Dialogic JCT Media Boards can be used by developers to provide cost-effective, scalable, high-density communications applications. The applications include those requiring digital network interfaces as well as multimedia resources, such as voice and software-based speech recognition or fax in a single Personal Computer (PC) slot. These boards offer a rich set of advanced features and support Digital Signal Processor (DSP) technology and industry-standard PCI bus and CT Bus technologies. Products Discussed in This Datasheet ® ® • Dialogic D/160JCT Media Board • Dialogic D/320JCT Media Board CSP technology — the DSP-based solution optimized for speech recognition — enables a friendly user interface and seamless integration of speech recognition software from leading speech technology vendors. CSP reduces system latency, increases recognition accuracy, and improves overall system response time for high-density speech solutions. Onboard DSP-based fax and support for software-based speech recognition lets developers maximize the number of boards in the system for multimedia communications applications such as web-enabled call centers, uniŢed messaging, or Interactive Voice Response (IVR). The option to use voice coders such as Global System for Mobile Telecommunication (GSM) and G.726 provides the capability to build uniŢed messaging solutions while extending existing legacy messaging systems. Features Benefits 16 or 32 independent voice channels in a single Lower costs while creating larger high-density systems with PCI H.100 slot fewer boards per chassis Supports G.726 bit exact and GSM coders Enables implementation of uniŢed messaging applications that meet VPIM standards Silence-compressed recording Eliminates silence and preserves hard disk space Universal PCI edge connector Universal PCI form factor compatibility with 3.3 V and 5.0 V bus signals enabling deployments in a wide variety of PCI chassis from popular manufacturers Supports DSP-based onboard fax and host-based speech Maximizes the number of boards in the system recognition on select boards (fax and host-based speech are mutually exclusive) ® Datasheet Dialogic JCT Media Boards Technical Specifications D/160JCT Number of ports 16 Maximum boards per system 6. Number may be limited by application, system performance, and the number of CT Bus loads per board. CT Bus loads per board 1.0 Maximum CT Bus loads per system 20 Resource sharing bus H.100 CT Bus Control microprocessor 1 Intel486 GX processor Digital signal processors 2 Motorola DSP56303 @ 100 MHz ® Supported operating system Windows ; Linux. Details at http://www.dialogic.com/systemreleases CSP Yes Signaling Not applicable Host Interface Bus compatibility PCI. Complies with PCISIG Bus SpeciŢcation, Rev. 2.2 Bus speed 33 MHz maximum Bus mode 32- to 16-bit conversion in target mode Shared memory 2 x 64 KB page I/O ports None Support 3.3 V or 5 V signaling environment (universal connectivity) Platform Form factor PCI (universal connector) 12.3 in. (31.24 cm) long (without edge retainer) or 13.3 in. (33.78 cm) long (with edge retainer) 0.79 in. (2 cm) wide (total envelope) 3.87 in. (9.83 cm) high (excluding edge connector) Power Requirements +5 VDC 1.5 A maximum +12 VDC 3.0 mA maximum –12 VDC Not required 2 ® Dialogic JCT Media Boards Datasheet Technical Specifications (cont.) Environmental Requirements Operating temperature +32°F (0°C) to +122°F (+50°C) Storage temperature -4°F (–20°C) to 158°F (+70°C) Humidity 8% to 80% noncondensing Approvals and Compliance Hazardous substances RoHS Compliance Information at http://www.dialogic.com/rohs Safety and EMC Canada ICES-003 Class A ULc File E96804 Europe EN60950 EN55022 EN55024 Japan VCCI Class A United States FCC Part 15 Class A UL 1950 File E96804 International IEC950 CISPR 22 CISPR 24 Telecom Approvals United States FCC part 68 ID#: EBZUSA-23891-CE-E Country-speciŢc approvals See the Product Declarations & Global Approvals list at http://www.dialogic.com/declarations/ or contact your Authorized Distributor Reliability/Warranty Estimated MTBF Per Telcordia Method I PCI: 367,000 hours Warranty Warranty information at http://www.dialogic.com/warranties 3 ® Datasheet Dialogic JCT Media Boards Technical Specifications (cont.) D/320JCT Number of ports 32 Maximum boards/system 6. Number may be limited by application, system performance, and the number of CT Bus loads per board CT Bus loads per board 1.5 Maximum CT Bus loads/system 20 Resource sharing bus H.100 CT Bus Control microprocessors 2 Intel486 GX processors Digital signal processors 4 Motorola DSP56303 @ 100 MHz ® Operating system Windows ; Linux. Details at http://www.dialogic.com/systemreleases CSP Yes Signaling Not applicable Host Interface Bus compatibility PCI. Complies with PCISIG Bus SpeciŢcation, Rev. 2.2 Bus speed 33 MHz maximum Bus mode 32- to 16-bit conversion in target mode Shared memory 2 x 64 KB page I/O ports None Support 3.3 V or 5 V signaling environment (universal connectivity) Platform Form factor PCI (universal connector) 12.3 in. (31.24 cm) long (without edge retainer) or 13.3 in. (33.78 cm) long (with edge retainer) 0.79 in. (2 cm) wide (total envelope) 3.87 in. (9.83 cm) high (excluding edge connector) 4 ® Dialogic JCT Media Boards Datasheet Technical Specifications (cont.) Power Requirements +5 VDC 2.0 A maximum +12 VDC 7.0 mA maximum –12 VDC Not required Environmental Requirements Operating temperature +32°F (0°C) to +122°F (+50°C) Storage temperature -4°F (–20°C) to 158°F (+70°C) Humidity 8% to 80% noncondensing Approvals and Compliance Hazardous substances RoHS Compliance Information at http://www.dialogic.com/rohs Safety and EMC Canada ICES-003 Class A ULc File E96804 Europe EN60950 EN55022 EN55024 Japan VCCI Class A United States FCC Part 15 Class A UL 1950 File E96804 International IEC950 CISPR 22 CISPR 24 Telecom Approvals United States FCC part 68 ID#: EBZUSA-23891-CE-E Country-speciŢc approvals See the Product Declarations & Global Approvals list at http://www.dialogic.com/declarations/ or contact your Authorized Distributor Reliability/Warranty Estimated MTBF Per Telcordia Method I PCI: 244,000 hours Warranty Warranty information at http://www.dialogic.com/warranties 5 ® Datasheet Dialogic JCT Media Boards Springware/JCT Technical Specifications Facsimile Fax compatibility ITU-T G3 compliant (T.4, T.30) ETSI NET/30 compliant Data rate 14,400 b/s (v.17) send 9,600 b/s receive Variable speed selection Automatic step-down to 12,000 b/s, 9,600 b/s, 7,200 b/s, 4,800 b/s, and lower Transmit data modes ModiŢed Huffman (MH) ModiŢed Read (MR) Receive data modes MH, MR File data formats Tagged Image File Format-Fax (TIFF-F) for transmit/receive MH, MR ASCII-to-fax conversion Host-PC-based conversion Direct transmission of text Ţles ® All Windows fonts supported Page headers generated automatically Error correction Detection, reporting, and correction of faulty scan lines Image widths 8.5 in. (21.6 cm) 10.0 in. (25.4 cm) 11.9 in. (30.23 cm) Image scaling Automatic horizontal and vertical scaling between page sizes Polling modes Normal Turnaround Image resolution Normal (203 pels/in.x 98 lines/in.; 203 pels/2.54 cm x 98 lines/2.54 cm) Fine (203 pels/in. x 196 lines/in.; 203 pels/2.54 cm x 196 lines/2.54 cm) Fill minimization Automatic Ţll bit insertion and stripping Audio Signal Usable receive range (T-1) –40 to +2.5 dBm0 nominal, conŢgurable by parameter** (E-1) –43 to +2.5 dBm0 nominal, conŢgurable by parameter** Automatic gain control Application can enable/disable output level, conŢgurable by parameter** Silence detection –38 dBm0 nominal, software adjustable** Transmit level (weighted average) (T-1) –9 dBm0 nominal, conŢgurable by parameter** (E-1) –12.5 dBm0 nominal, conŢgurable by parameter** Transmit volume control 40 dB adjustment range, with application-deŢnable increments and legal limit cap Frequency Response 24 kb/s 300 Hz to 2600 Hz ±3 dB 32 kb/s 300 Hz to 3400 Hz ±3 dB 48 kb/s 300 Hz to 2600 Hz ±3 dB 64 kb/s 300 Hz to 3400 Hz ±3 dB Audio Digitizing 13 kb/s GSM @ 8 kHz sampling 24 kb/s OKI ADPCM @ 6 kHz sampling 32 kb/s OKI ADPCM @ 8 kHz sampling 32 kb/s G.726 @ 8 kHz sampling 48 kb/s A-law G.711 PCM @ 6 kHz sampling 48 kb/s µ-law G.711 PCM @ 6 kHz sampling 64 kb/s A-law G.711 PCM @ 8 kHz sampling 64 kb/s µ-law G.711PCM @ 8 kHz sampling Digitization selection Selectable by application on function call-by-call basis Playback speed control Pitch controlled Available on OKI ADPCM and G.711 PCM Adjustment range: ±50% Adjustable through application or programmable DTMF control 6 ® Dialogic JCT Media Boards Datasheet Springware/JCT Technical Specifications (cont.) DTMF Tone Detection DTMF digits 0 to 9, *, #, A, B, C, D per ITU-T Q.23 Dynamic range (T-1) –36 dBm0 to –3 dBm0 per tone, conŢgurable by parameter** (E-1) –39 dBm0 to 0 dBm0 per tone, conŢgurable by parameter** Minimum tone duration 40 ms, can be increased with software conŢguration Interdigit timing Detects like digits with a >40 ms interdigit delay Detects different digits with a 0 ms interdigit delay Acceptable twist (T-1) Meets Telcordia LSSGR Sec 6 and EIA 464 requirements (E-1) Meets appropriate ITU-T speciŢcations** Noise tolerance Meets Telcordia LSSGR Sec 6 and EIA 464 requirements for Gaussian, impulse, and power line noise tolerance Cut-through (T-1) Local echo cancellation permits 100% detection with a >4.5 dB return loss line (E-1) Digital trunks use separate transmit and receive paths to network Performance dependent on far-end handset’s match to local analog loop Talk-off Detects less than 20 digits while monitoring Telcordia TR-TSY-000763 standard speech tapes (LSSGR requirements specify detecting no more than 470 total digits) Detects 0 digits while monitoring MITEL speech tape #CM 7291 Global Tone Detection Tone type Programmable for single or dual Maximum number of tones Application-dependent Frequency range Programmable within 300 Hz to 3500 Hz Maximum frequency deviation Programmable in 5 Hz increments Frequency resolution ±5 Hz. Separation of dual frequency tones is limited to 62.5 Hz at a signal-to-noise ratio of 20 dB Timing Programmable cadence qualiŢer, in 10 ms increments Dynamic range (T-1) Programmable, default set at –36 dBm0 to –0 dBm0 (single tone), –3 dBm0 (dual tone) (E-1) Programmable, default set at –39 dBm0 to +0 dBm0 per tone Global Tone Generation Tone type Generate single or dual tones Frequency range Programmable within 200 Hz to 4000 Hz Frequency resolution 1 Hz Duration 10 ms increments Amplitude (T-1) –43 dBm0 to –3 dBm0 per tone nominal, programmable (E-1) –40 dBm0 to +0 dBm0 per tone nominal, programmable Call Progress Analysis Busy tone detection Default setting designed to detect 74 out of 76 unique busy/congestion tones used in 97 countries as speciŢed by ITU-T Rec. E., Suppl. #2 Default uses both frequency and cadence detection Application can select frequency only for faster detection in speciŢc environments Ring back detection Default setting designed to detect 83 out of 87 unique ring back tones used in 96 countries as speciŢed by ITU-T Rec. E., Suppl. #2 Uses both frequency and cadence detection Positive voice detection Standard Positive voice detection speed Detects voice in as little as 1/10th of a second Positive answering machine detection Standard Fax/modem detection Preprogrammed Intercept detection Detects entire sequence of the North American tri-tone Other intercept tone sequences can be programmed Dial tone detection before dialing Application enable/disable Supports up to three different user-deŢnable dial tones Programmable dial tone drop out debouncing 7 ® Datasheet Dialogic JCT Media Boards Springware/JCT Technical Specifications (cont.) Tone Dialing DTMF digits 0 to 9, *, #, A, B, C, D per Telcordia LSSGR Sec 6, TR-NWT-000506 Frequency variation Less than ±1 Hz Rate 10 digits/s, conŢgurable by parameter** Level –7.5 dBm0 per tone, nominal, conŢgurable by parameter** Pulse Dialing 10 digits 0 to 9 Pulsing rate 10 pulses/s, nominal, conŢgurable by parameter** Break ratio 60% nominal, conŢgurable by parameter** Analog Display Services Interface (ADSI) FSK generation per Telcordia TR-NWT-000030 Programmable dial tone drop out debouncing 8 ® Dialogic JCT Media Boards Datasheet Additional Components • Multidrop CT Bus cables — CBLCTB68C3DROP — CBLCTB68C4DROP — CBLCTB68C8DROP — CBLCTB68C12DROP — CBLCTB68C16DROP Ordering Information Product Code Order Code Description D320JCTW 881-769 32-port, PCI D160JCTW 881-765 16-port, PCI 9 To learn more, visit our site on the World Wide Web at http://www.dialogic.com Dialogic Corporation 9800 Cavendish Blvd., 5th ţoor Montreal, Quebec CANADA H4M 2V9 INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH PRODUCTS OF DIALOGIC CORPORATION (“DIALOGIC”). NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN A SIGNED AGREEMENT BETWEEN YOU AND DIALOGIC, DIALOGIC ASSUMES NO LIABILITY WHATSOEVER, AND DIALOGIC DISCLAIMS ANY EXPRESS OR IMPLIED ® WARRANTY, RELATING TO SALE AND/OR USE OF DIALOGIC PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT OF A THIRD PARTY. Dialogic products are not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications. Dialogic may make changes to speciŢcations, product descriptions, and plans at any time, without notice. Dialogic is a registered trademark of Dialogic Corporation. Dialogic's trademarks may be used publicly only with permission from Dialogic. Such permission may only be granted by Dialogic’s legal department located at the address given above. Any authorized use of Dialogic's trademarks will be subject to full respect of the trademark guidelines published by Dialogic from time to time and any use of Dialogic’s trademarks requires proper acknowledgement. Windows is a registered trademark of the Microsoft Corporation in the United States and/or other countries. Other names of actual companies and products mentioned herein are the trademarks of their respective owners. Dialogic encourages all users of its products to procure all necessary intellectual property licenses required to implement their concepts or applications, which licenses may vary from country to country. None of the information provided in this datasheet other than what is listed under the section entitled Technical SpeciŢcations forms part of the speciŢcations of the product and any beneŢts speciŢed are not guaranteed. Positive Answering Machine Detection/Positive Voice Detection These performance results were measured using speciŢc computer systems and/or components within speciŢc lab environments and under speciŢc system conŢgurations. Any difference in system hardware, software design, or conŢguration may affect actual performance. The results are furnished for informational use only and should not be construed as a commitment by Dialogic. Dialogic assumes no responsibility or liability for any errors or inaccuracies. Outbound Dialing/Telemarketing Outbound dialing systems may be subject to certain laws or regulations. Dialogic makes no representation that Dialogic products will satisfy the requirements of any such laws or regulations (including, without limitation, any regulations dealing with telemarketing). **ConŢgurable to meet country-speciŢc PTT requirements. Actual speciŢcation may vary from country to country for approved products. Copyright © 2007 Dialogic Corporation All rights reserved. 10/07 7647-05 www.dialogic.com