Datasheet JCT Media Board ® Dialogic D/120JCT-LS Media Board ® The Dialogic D/120JCT-LS Media Board is a 12-port analog PCI or PCI Express board well-suited for developing advanced communica- tions applications that require multimedia resources. This high performance, scalable product supports voice, fax, and software-based speech recognition processing in a single PCI or PCI Express slot, providing 12 analog telephone interface circuits for direct connection to analog loop start lines. The D/120JCT-LS offers the enhanced capabilities an evolving communications market segment demands. The product is suitable for advanced Computer Telephony (CT) based communications applications that require multimedia resources such as web-enabled contact centers, uniŢed messaging, and speech-enabled Interactive Media Response (IMR) systems. The D/120JCT-LS offers a rich set of advanced features in addition to supporting Digital Signal Processor (DSP) technology and signal processing algorithms, ensuring a competitive edge for a variety of solutions. Features Benefits Supports G.726 bit exact and GSM coders Enables implementation of uniŢed messaging applications that meet VPIM standards Supports Continuous Speech Processing (CSP) Provides a ţexible speech processing technology, which when coupled with efŢcient drivers, off-loads critical real-time signal processing in speech-enabled applications to onboard DSPs. Reduces system latency, increases recognition accuracy, and improves overall system response time for high-density speech solutions. A-law or μ-law voice coding at dynamically selectable data Allows the optimal tradeoff between disk storage and voice quality rates, 24 kb/s to 64 kb/s, selectable on a channel-by- channel basis Telecordia CLASS, UK CLI, Japanese Caller ID, and other Supports an international Caller ID capability via on-hook international protocols audio path A variety of country-speciŢc approvals Expands an application’s ability to serve several global market segments at no extra cost Separate models available with Universal PCI or PCI Express Universal PCI form factor compatible with 3.3 V and 5.0 V edge connector bus signals that enables deployment in a wide variety of PCI chassis from popular manufacturers; PCI Express form factor compatible with 1x slots (that is, x1 or higher compatible) is also available Supports up to four channels of DSP-based onboard fax Reduces the number of boards per system ® Datasheet Dialogic D/120JCT-LS Media Board Technical Specifications Number of ports 12 ® Maximum boards per system 8 (Linux and Windows ). Number may be limited by application and system performance CT Bus loads per board 1 Maximum CT Bus loads per system 20 Analog network interface Onboard loop start interface (12) Resource sharing bus CT Bus Control microprocessor Intel 80486 GXSF running at 32.768 MHz with 2 MB SDRAM Digital signal processor Freescale DSP56303 @ 100 MHz, with 128Kx24 private SRAM ® Supported operating systems Windows ; Linux. Details at http:www.dialogic.com/systemreleases CSP Yes Signaling Analog loop start Host Interface — PCI Bus compatibility Complies with PCI-SIG Bus SpeciŢcation, Rev. 2.2 Bus speed 33 MHz maximum Bus mode 32-bit Shared memory 32 KB to 64 KB page Interrupt level One IRQ is shared by all D/120JCT-LS boards I/O ports None Platform — PCI Form factor Universal slot (5 V or 3.3 V) PCI long card 12.28 in. (31.2 cm) long 4.2 in. (10.67 cm) high Power Requirements — PCI +5 VDC 1.2 A typical, 1.4 A maximum +12 VDC 235 mA typical, 285 mA maximum –12 VDC 80 mA typical, 100 mA maximum Host Interface — PCI Express Bus compatibility Complies with PCI-SIG PCI Express Base SpeciŢcation, Rev. 1.1 Bus speed 2.5 GHz maximum per direction Bus mode x1 lane conŢguration (x1 or higher compatible) Shared memory 32 KB to 64 KB page Interrupt level Message Signaled Interrupt (MSI) I/O ports None Platform — PCI Express Form factor PCI Express x1 lane conŢguration (or higher) 12.28 in. (31.2 cm) long 4.2 in. (10.67 cm) high Power Requirements — PCI Express +3.3 VDC 1.12 A typical, 1.4 A maximum +12 VDC 800 mA typical, 900 mA maximum Environmental Requirements — PCI and PCI Express Operating temperature +32°F (0°C) to +122°F (+50°C) Storage temperature -4°F (–20°C) to 158°F (+70°C) Humidity 8% to 80% noncondensing 2 ® Dialogic D/120JCT-LS Media Board Datasheet Technical Specifications (cont.) 1 Telephone Interface Trunk type Loop start Ground start for inbound applications with AC ringing Impedance 600 Ohms nominal Ring detection 40 Vrms to 130 Vrms, 15.3 Hz to 68.0 Hz Loop current range 20 mA to 60 mA, (Euro) 20 mA to 120 mA, polarity insenstive Echo return loss 17 dB minimum (at country impedance) Crosstalk coupling >–75 dB Speech digitization 64 kb/s, µ-law PCM (companding to ADPCM performed in Springware) Frequency response 300 Hz to 3400 Hz ±3 dB Connector RJ-25, 6-port, 6-position Approvals and Compliance Hazardous substances RoHS Compliance Information at http://www.dialogic.com/rohs Safety and EMC Canada ICES-003 Class A ULc CSA 60950-1 File E96804 Europe EN60950 EN55022 EN55024 Japan VCCI Class A United States FCC Part 15 Class A UL 60950-1 File E96804 International IEC60950 CISPR 22 CISPR 24 Telecom Approvals Canada IC: 1000U 10540 A European Union DoC 06/30/2003 Japan A00-0318JP United States US:EBZUSA-34827-KX-N Country-speciŢc approvals See the Product & Global Approvals list at http://www.dialogic.com/declarations/ or contact your Authorized Distributor Reliability/Warranty Estimated MTBF Per Telcordia Method PCI:154,000 hours PCI Express:154,000 hours Warranty Warranty Information at http://www.dialogic.com/warranties 3 ® Datasheet Dialogic D/120JCT-LS Media Board Springware/JCT Technical Specifications Facsimile Fax compatibility ITU-T G3 compliant (T.4, T.30) ETSI NET/30 compliant Maximum data rate 14.4 kb/s (v.17) send 9.6 kb/s (v.29) receive Variable speed selection Automatic step-down to 12 kb/s, 9.6 kb/s, 7.2 kb/s, 4.8 kb/s, and lower Transmit data modes ModiŢed Huffman (MH) ModiŢed Read (MR) Receive data modes MH, MR File data formats Tagged Image File Format-Fax (TIFF-Fax) for transmit/receive MH and MR ASCII-to-fax conversion Host-PC-based conversion Direct transmission of text Ţles ® All Windows fonts supported Page headers generated automatically Error correction Detection, reporting, and correction of faulty scan lines Image widths 8.5 in. (21.5 cm) 10.0 in. (25.5 cm) 11.9 in. (30.3 cm) Image scaling Automatic horizontal and vertical scaling between page sizes Polling modes Normal Turnaround Image resolution Normal (203 pels/in. x 98 lines/in.) (203 pels/2.54 cm x 98 lines/2.54 cm) Fine (203 pels/in. x 196 lines/in.) (203 pels/2.54 cm x 196 lines/2.54 cm) Fill minimization Automatic Ţll bit insertion and stripping Audio Signal Receive range –40 dBm to –7 dBm nominal, conŢgurable by parameter** Automatic gain control Application can enable/disable Above –22 dBm results in full-scale recording, conŢgurable by parameter** Silence detection –40 dBm nominal, software adjustable** Transmit level (weighted average) –9.5 dBm nominal, conŢgurable by parameter** Transmit volume control 40 dB adjustment range, with application-deŢnable increments and legal limit cap Frequency Response 24 kb/s 300 Hz to 2600 Hz ±3 dB 32 kb/s 300 Hz to 3400 Hz ±3 dB 48 kb/s 300 Hz to 2600 Hz ±3 dB 64 kb/s 300 Hz to 3400 Hz ±3 dB Audio Digitizing 13 kb/s GSM @ 8 kHz sampling 24 kb/s OKI ADPCM @ 6 kHz sampling 32 kb/s OKI ADPCM @ 8 kHz sampling 32 kb/s G.726 @ 8 kHz sampling 48 kb/s µ-law PCM @ 6 kHz sampling 64 kb/s µ-law PCM @ 8 kHz sampling Digitization selection Selectable by application on function call-by-call basis Playback speed control Pitch controlled Available for 24 kb/s and 32 kb/s data rates Adjustment range: ±50% Adjustable through application or programmable DTMF control 4 ® Dialogic D/120JCT-LS Media Board Datasheet Springware/JCT Technical Specifications (cont.) DTMF Tone Detection DTMF digits 0 to 9, *, #, A, B, C, D per Telecordia LSSGR Sec 6 Dynamic range –38 dBm to –3 dBm per tone, conŢgurable by parameter** Minimum tone duration 40 ms, can be increased with software conŢguration Interdigit timing Detects like digits with a >40 ms interdigit delay Detects different digits with a 0 ms interdigit delay Twist and frequency variation Meets Telecordia LSSGR Sec 6 and EIA 464 requirements Noise tolerance Meets Telecordia LSSGR Sec 6 and EIA 464 requirements for Gaussian, impulse, and power line noise tolerance Cut-through Local echo cancellation permits 100% detection with a >4.5 dB return loss line Talk-off Detects less than 20 digits while monitoring Telecordia TR-TSY-000763 standard speech tapes (LSSGR requirements specify detecting no more than 470 total digits) Detects 0 digits while monitoring MITEL speech tape #CM 7291 Global Tone Detection Tone type Programmable for single or dual Maximum number of tones Application-dependent Frequency range Programmable within 300 Hz to 3500 Hz Maximum frequency deviation Programmable in 5 Hz increments Frequency resolution ± 5 Hz. Separation of dual-frequency tones is limited to 62.5 Hz at a signal-to-noise ratio of 20 dB Timing Programmable cadence qualiŢer, in 10 ms increments Dynamic range Programmable, default set at –6 dBm to –3 dBm per tone Global Tone Generation Tone type Generate single or dual tones Frequency range Programmable within 200 Hz to 4000 Hz Frequency resolution 1 Hz Duration 10 ms increments Amplitude –43 dBm to –3 dBm per tone, programmable MF Signaling MF digits 0 to 9, KP, ST, ST1, ST2, ST3 per Telecordia LSSGR Sec 6, TR-NWT-000506 and ITU-T Q.321 Transmit level Complies with Telecordia LSSGR Sec 6, TR-NWT-000506 Signaling mechanism Complies with Telecordia LSSGR Sec 6, TR-NWT-000506 Dynamic range for detection –25 dBm to –3 dBm per tone Acceptable twist 6 dB Acceptable frequency variation Less than ±1 Hz Call Progress Analysis Busy tone detection Default setting designed to detect 74 out of 76 unique busy/congestion tones used in 97 countries as speciŢed by ITU-T Rec. E., Suppl. #2 Default uses both frequency and cadence detection Application can select frequency only for faster detection in speciŢc environments Ring back detection Default setting designed to detect 83 out of 87 unique ring back tones used in 96 countries as speciŢed by ITU-T Rec. E., Suppl. #2 Uses both frequency and cadence detection Positive voice detection accuracy >99% based on tests on a database of real world calls in North America Performance in other markets may vary Positive voice detection speed Detects voice in as little as 1/10th of a second Positive answering machine detection >85% based on application and environment accuracy Fax/modem detection Pre-programmed Intercept detection Detects entire sequence of the North American tri-tone Other intercept tones sequences can be programmed 5 ® Datasheet Dialogic D/120JCT-LS Media Board Springware/JCT Technical Specifications (cont.) Call Progress Analysis (cont.) Dial tone detection before dialing Application enable/disable Supports up to three different user-deŢnable dial tones Programmable dial tone drop out debouncing Tone Dialing DTMF digits 0 to 9, *, #, A, B, C, D per Telecordia LSSGR Sec 6, TR-NWT-000506 Frequency variation Less than ±1 Hz Rate 10 digits/s maximum, conŢgurable by parameter** Level –4.0 dBm per tone, nominal, conŢgurable by parameter** Pulse Dialing 10 digits 0 to 9 Pulsing rate 10 pulses/s, nominal 20 pulses/s for Japan, conŢgurable by parameter** Break ratio 60% nominal, conŢgurable by parameter** Analog Caller Identification Applicable standards Telecordia TR-TSY-000030 Telecordia TR-TSY-000031 TAS T5 PSTN1 ACLIP: 1994 (Singapore) Modem standard Bell 202 or V.23, serial 1200 bits/sec (simplex FSK signaling) Receive sensitivity –48 dBm (–50 dBv) to –1 dBm Noise tolerance Minimum 18 dB SNR over 0 to –48 dBm dynamic range for error-free performance Data formats Single Data Message (SDM) and Multiple Data Message (MDM) formats via API calls and commands Line impedance AC coupled 600 Ohm (@ 1.8 kHz) termination during Caller ID on-hook detection interval Message formats ASCII or binary SDM, MDM message content Analog Display Services Interface (ADSI) FSK generation per Telecordia TR-NWT-000030 CAS tone generation and DTMF detection per Telecordia TR-NWT-001273 Hardware System Requirements Pentium processor based (PCI or PCI Express) bus or compatible computer. Operating system hardware requirements vary according to the number of channels being used. Additional Components (with Item Market Names) • Multidrop CT Bus cables (CBLCTB68C3DROP, CBLCTB68C4DROP, CBLCTB68C8DROP, CBLCTB68C12DROP, CBLCTB68C16DROP) • CT Bus/SCbus adapter (CTBUSTOSCBUSADP) • SCbus terminator kits (1SCBUS1TERMKIT, 2SCBUS1TERMKIT, 3SCBUS1TERMKIT) • Six-strand RJ-type cable (preferred solution for customers using all 12 channels) (RJ-11 connectors to standard 50- pin Amphenol connector) (CBLD120PCI25PP) plus breakout box (BOB25POSJ11) • “Two-into-one” conversion cable (preferred solution for customers using only one or two channels) — Six cables per board required — US (CBLRJ14TORJ11YA) and Euro (CBLD120PCIYADAP) cables sold separately 6 ® Dialogic D/120JCT-LS Media Board Datasheet Ordering Information Product Code Order Code Description D120JCTLSWEU 881-816 12-port Analog, Loop-Start, PCI, Europe D120JCTLSW 881-762 12-port Analog, Loop-Start, PCI D120JCTLSWIN 881-847 12-port Analog, Loop-Start, PCI,India D120JCTLSEW 884-594 12-port Analog, Loop-Start, PCIe D120JCTLSEWIN 884-579 12-port Analog, Loop-Start, PCIe, India D120JCTLSEWEU 884-578 12-port Analog, Loop-Start, PCIe, Europe 7 To learn more, visit our site on the World Wide Web at http://www.dialogic.com Dialogic Corporation 9800 Cavendish Blvd., 5th ţoor Montreal, Quebec CANADA H4M 2V9 INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH PRODUCTS OF DIALOGIC CORPORATION (“DIALOGIC”). NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN A SIGNED AGREEMENT BETWEEN YOU AND DIALOGIC, DIALOGIC ASSUMES NO LIABILITY WHATSOEVER, AND DIALOGIC DISCLAIMS ANY EXPRESS OR IMPLIED ® WARRANTY, RELATING TO SALE AND/OR USE OF DIALOGIC PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT OF A THIRD PARTY. Dialogic products are not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications. Dialogic may make changes to speciŢcations, product descriptions, and plans at any time, without notice. Dialogic is a registered trademark of Dialogic Corporation. Dialogic’s trademarks may be used publicly only with permission from Dialogic. Such permission may only be granted by Dialogic’s legal department located at the address given above. Any authorized use of Dialogic’s trademarks will be subject to full respect of the trademark guidelines published by Dialogic from time to time and any use of Dialogic’s trademarks requires proper acknowledgement. Windows is a registered trademark of the Microsoft Corporation in the United States and/or other countries. Other names of actual companies and products mentioned herein are the trademarks of their respective owners. Dialogic encourages all users of its products to procure all necessary intellectual property licenses required to implement their concepts or applications, which licenses may vary from country to country. None of the information provided in this datasheet other than what is listed under the section entitled Technical SpeciŢcations forms part of the speciŢcations of the product and any beneŢts speciŢed are not guaranteed. Positive Answering Machine Detection/Positive Voice Detection These performance results were measured using speciŢc computer systems and/or components within speciŢc lab environments and under speciŢc system conŢgurations. Any difference in system hardware, software design, or conŢguration may affect actual performance. The results are furnished for informational use only and should not be construed as a commitment by Dialogic. Dialogic assumes no responsibility or liability for any errors or inaccuracies. Outbound Dialing/Telemarketing Outbound dialing systems may be subject to certain laws or regulations. Dialogic makes no representation that Dialogic products will satisfy the requirements of any such laws or regulations (including, without limitation, any regulations dealing with telemarketing). 1 Average speech mandates +16 dB peaks above average and preserves –13 dB valleys below average. ** Analog levels: 0 dBm0 corresponds to a level of +3 dBm at tip-ring analog point. Values vary depending on country requirements; contact your account manager. Copyright © 2007 Dialogic Corporation All rights reserved. 10/07 6046-12 www.dialogic.com