DBX 266XL
Specifications
Attack Time Compressor
Scalable Program Dependent
Common Mode Rejection
>40dB (Any Frequency)
Compressor
-40 to +20dB
Dimensions
(H x W x D) 1.75"x5.75"x19" (4.45cm x14.6cm x 48.5cm)
Dynamic Range
>114dB, unweighted
Exp/Gate
Program Dependent Threshold
Expander/Gate
-60 to + 10 dB
Frequency Response Bandwidth
0.35Hz-80kHz, +0, -3dB
Frequency Response Flat
20Hz-20kHz, +0, -0.5dB
Frequency Response Input Impedance
40kO Balanced/Unbalanced
Frequency Response Max Level
+22dBu
Impedance
Balanced +4dBu: Balanced: 200O, Unbalanced: 100O
Input Impedance
>10kO
Max Level
+21dBu
Outout Max Level
+21dBu into 600O
Output Impedance
=2kO
Power Consumption
15watts, 100 VAC 50/60 Hz, 120 VAC 60 Hz, 230 VAC 50/60 Hz
Ratio: Compressor
1:1 to 8:1, Expander/Gate 1:1 to 4:1
Release Time Compressor
Scalable Program Dependent
Release Time Expander/Gate
Program Depenedent
Stereo Coupling
True RMS Power Summing
Threshold Chracteristics
Selectable OverEasy or hard knee
Weight
Net Weight: 5 lbs. (2.3 kg);, Shipping weight: 7 lbs (3.2 kg)
Features
- Balanced inputs and outputs on 1/4" TRS and XLR
- Classic dbx "Auto" mode
- Goof proof operation to smooth uneven levels, add sustain to guitars, fatten drums or tighten up mixes
- Great sounding dynamics control for any type of program material
- New gate timing algorithms ensure the smoothest release characteristics
- Program-adaptive expander/gates
- Separate precision LED displays for gain reduction, compression threshold and gate threshold allow quick, accurate setup
- Side Chain insert
- Stereo or dual-mode operation
Datasheet
dbx=266XL=DatatShee-454001428t.pdf
283 KiB
Extracted Text
® Most compressor/gates provide less than musical compression, coupled with gating that swallows transients—or clos- es early, cutting off decay and reverb tails. The superb engineering in the 266XL ensures that both its compression and gating provide versatility and excellent sonic performance in situations where other compressor/gates typically pro- duce undesirable processing artifacts. When using the 266XL’s AutoDynamic™ Attack and Release controls, artists and engineers will find that the center settings deliver classic dbx compression, while the full control range produces voicings that extend from slow “level- ing” to aggressive “peak” limiting. The Auto Dynamic™ circuitry continuously adjusts the actual attack and release times to optimally match the pro- gram material. Since users aren’t restricted to using the Attack and Release controls only in “peak” operation, they can tailor the response of the 266XL for individual tracks, mixed program material, special effects or system protec- tion. As a result, production studios can use the versatile 266XL to replace multiple “single-purpose” limiters while sound reinforcement users can standardize on the 266XL for all of their applications. The 266XL’s advanced gate circuitry uses a completely new, program-dependent timing algorithm to produce ultra- smooth release characteristics—even with complex signals, such as voice or reverb decays. dbx engineers went on to take advantage of the wide dynamic range and high precision of the dbx VCA to design in an extra-wide threshold range and ensure top gating performance for each application. Separate precision LED displays for gain reduction, compression threshold and gate threshold allow quick, accurate setup, while the 266XL’s intuitive operation lets users easily smooth uneven levels, add sustain to guitars, squash drums or tighten up mixes. In Stereo couple mode, the Channel 1 controls become Master controls, and Channel 2 fol- lows precisely to ensure a rock solid stereo image—even with high amounts of compression. Professionals and new- comers will find that the 266XL sets up rapidly and musically the first time it is used, and every time thereafter. The dbx 266XL processor is the result of an intensive engineering and product development effort aimed at taking advantage of the latest and best advances in manufacturing technology to deliver true dbx audio performance and reli- ability to our customers at the lowest possible cost. The 266XL puts a completely new level of compressor/gate per- formance within everyone’s reach. • Goof proof operation to smooth uneven lev- • Stereo or dual-mono operation. els, add sustain to guitars, fatten drums or • Balanced inputs and outputs on 1/4" TRS tighten up mixes. and XLR. • New gate timing algorithms ensure the • Side Chain insert. smoothest release characteristics. • Classic dbx “Auto” mode. • Program-adaptive expander/gates. • Great sounding dynamics control for any 8760 S. Sandy Pkwy. type of program material Sandy, Utah 84070 Phone (801) 568-7660 • Separate precision LED displays for gain Fax (801) 568-7662 reduction, compression threshold and gate customer@dbxpro.com http://www.dbxpro.com threshold allow quick, accurate setup. A Harman International Company 18-1673-E 08/05 THRESHOLD THRESHOLD GAIN REDUCTION dB THRESHOLD THRESHOLD GAIN REDUCTION dB - + - 0 + 30 25 20 15 10 6 3 1 - + - 0 + 30 25 20 15 10 6 3 1 CHANNEL ONE CHANNEL TWO -40 -10 2:1 0 -40 -10 2:1 0 2:1 2:1 -20 -20 -20 0 -20 0 -60 3:1 1.3:1 4:1 -10 +10 -60 3:1 1.3:1 4:1 -10 +10 266XL 0 1.3:1 -30 +10 0 1.3:1 -30 +10 Compressor/ Stereo OverEasy Auto Bypass Couple OverEasy Auto Bypass Gate OFF +15 1:1 4:1 -40 +20 1:1 :1 FAST SLOW FAST SLOW -20 +20 OFF +15 1:1 4:1 -40 +20 1:1 :1 FAST SLOW FAST SLOW -20 +20 dBu dBu dB dBu dBu dB THRESHOLD RATIO THRESHOLD RATIO ATTACK RELEASE OUTPUT GAIN THRESHOLD RATIO THRESHOLD RATIO ATTACK RELEASE OUTPUT GAIN EXPANDER/GATE COMPRESSOR EXPANDER/GATE COMPRESSOR 266XL COMPRESSOR / GATE THRESHOLD THRESHOLD GAIN REDUCTION dB THRESHOLD THRESHOLD GAIN REDUCTION dB - + - + - + - + 0 30 25 20 15 10 6 3 1 0 30 25 20 15 10 6 3 1 CHANNEL ONE CHANNEL TWO -40 -10 2:1 0 -40 -10 2:1 0 2:1 2:1 -20 -20 0 -20 -20 0 -60 3:1 1.3:1 4:1 -10 +10 -60 3:1 1.3:1 4:1 -10 +10 266XL 0 1.3:1 -30 +10 0 1.3:1 -30 +10 Compressor/ Stereo OverEasy Auto Bypass Couple OverEasy Auto Bypass Gate OFF +15 1:1 4:1 -40 +20 1:1 :1 FAST SLOW FAST SLOW -20 +20 OFF +15 1:1 4:1 -40 +20 1:1 :1 FAST SLOW FAST SLOW -20 +20 dBu dBu dB dBu dBu dB THRESHOLD RATIO THRESHOLD RATIO ATTACK RELEASE OUTPUT GAIN THRESHOLD RATIO THRESHOLD RATIO ATTACK RELEASE OUTPUT GAIN EXPANDER/GATE COMPRESSOR EXPANDER/GATE COMPRESSOR 85-2598-X3 266 lineart (1-19-98) 15 WATTS MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS 4,234,804 4,316,107 4,329,598 4,331,931 4,377,792 4,403,199 4,409,500 4,425,551 4,434,380 4,454,433 4,471,324 4,473,793 OTHER PATENTS PENDING PHONE: CHANNEL 2 CHANNEL 1 SIDECHAIN SIDECHAIN TIP INSERT INSERT OUTPUTS INPUTS TIP=INPUT OUTPUTS INPUTS TIP=INPUT RING RING=OUTPUT RING=OUTPUT SLEEVE +4 dBu +4 dBu PROFESSIONAL PRODUCTS A HARMAN INTERNATIONAL XLR: -10 dBV -10 dBV COMPANY PIN 1 SALT LAKE CITY, UTAH MADE IN CHINA PIN 2 100V 50/60Hz 120V 60Hz MODEL 266XL COMPRESSOR/GATE PIN 3 The compressor/gate shall have two identical FREQUENCY RESPONSE: Common Mode Rejection: Flat: 20Hz-20kHz, +0, -0.5dB >40dB (Any Frequency) channels, each with an audio frequency response Bandwidth: 0.35Hz-80kHz, +0, -3dB Stereo Coupling: Input impedance: 40kΩ Balanced/Unbalanced True RMS Power Summing™ of 5Hz-40kHz, +0, -0.5dB, a balanced input Max Level: +22dBu Threshold Characteristics: impedance of not less than 40kΩ, with a maximum OUTPUT: Selectable OverEasy® or hard knee Impedance: Balanced Exp/Gate: Program Dependent Threshold input level of not less than +21dBu and a 1/4" TRS +4dBu: Balanced: 200Ω Compressor: -40 to +20dB Unbalanced: 100Ω Expander/Gate: -60 to + 10 dB input connector. The output impedance shall be no -10dBV: Balanced: 1.5kΩ Ratio: Compressor: 1:1 to ∞:1 more than 50Ω unbalanced, 100Ω balanced with a Unbalanced: 750Ω Expander/Gate 1:1 to 4:1 Max Level: +21dBu into 600Ω Attack Time: maximum output level of not less than +20dBu, a SIDE CHAIN INSERT: Compressor: Scalable Program Dependent Input Impedance: >10kΩ Expander/Gate: <100 µsec minimum load impedance at not more than 600Ω Output Impedance: ≤2kΩ Release Time: Max Level: +21dBu Compressor: Scalable Program Dependent and the connector type shall be 1/4" TRS. Total Distortion + Noise: <0.2% any amount of Expander/Gate: Program Dependent Harmonic Distortion shall be less than 0.2% with compression at 1kHz Power Requirements: Intermodulation Distortion: 15watts, 100 VAC 50/60 Hz, 120 VAC 60 Hz, 230 VAC any amount of compression at 1kHz, and <0.2% SMPTE 50/60 Hz Noise: <-93dBu unweighted DIMENSIONS: Intermodulation Distortion shall be less than 0.2%. Dynamic Range: (H x W x D) 1.75"x5.75"x19" (4.45cm x14.6cm x The unit shall have an output noise level of not >114dB, unweighted 48.5cm) Crosstalk: <-93dB @ 1kHz WEIGHT: Net Weight: 5 lbs. (2.3 kg); more than -93dBu unweighted, and a dynamic Shipping Weight: 7 lbs. (3.2 kg) range not less than 114dB. Outputs shall be gain adjustable in the amount of ±20dB from nominal gain via front-panel Output Gain con- trols, and all outputs shall be capable of driving a short circuit indefinitely with maximum input applied. The compressor attack and release times shall be scalable and program dependent. The gate attack time shall be <100µsec. The compression threshold shall range from -40 to +20dB. The gate threshold range shall be from -60 to +10dBu. The compressor/gate shall have a stereo coupling switch as well as the following controls for each channel: Compressor Threshold, Compressor Ratio, Attack, Release, Auto switch Output, Gain, Expander/Gate Threshold, Expander/Gate Ratio, Bypass. The following metering LEDs shall exist for each channel: Compressor Threshold (Below, At Above), Gain Reduction and Gate Threshold (Above and Below). The unit shall operate from a power source of 100 VAC 50/60 Hz to 120 VAC 60 Hz for a domestic unit and 230 VAC 50 Hz for a european unit via IEC type AC cable and shall consume no more than 15 W. The net weight shall be 7lbs. (3.2kg). The unit shall be a dbx 266XL Compressor/Gate. dbx engineers are constantly working to improve the quality of our products. FOR MORE INFORMATION CONTACT: Specifications are, therefore subject to change without notice. dbx Professional Products 8760 S. Sandy Pkwy. Sandy, Utah 84070 Phone (801) 568-7660 Fax (801) 568-7662 ® customer@dbxpro.com http://www.dbxpro.com A Harman International Company
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the 266XL have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods