215s Graphic EQ Dual 15-Band Equalizer Complete Loudspeaker Management System Exceptional sound and rugged reliability When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, dbx® EQ’s are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 215s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. The dbx 215s includes two 15-band channels of 2/3-octave equalization, ±12 dB input gain, switchable ±6 dB or ±12 dB boost/cut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 112 dB dynamic range to the quality componentry and meticulous attention to detail, the 215s offers exceptional sound and rugged reliability that guarantees you will always sound your best. Sure to find a home in the studio, on tour and with installed sound venues, the dbx 215s is destined to take its rightful place in the lineage of great dbx signal processors that are the professional’s choice in signal processing. With such affordable quality, there’s no longer any excuse for compromising your sound. Features < Dual 15-band, 1/3-octave Constant Q < Front panel bypass switch < XLR and TRS Inputs and Outputs frequency bands < ±12 dB input gain range < Frequency Response of <10 Hz to >50kHz < Switchable boost/cut ranges of < 4-segment LED ladders for monitoring < Dynamic range of greater than 108dB ±6 or ±12 dB output levels Who uses this product: SOUND BANDS DJs STUDIO INSTALLATION dbx Professional 8760 S. Sandy Pkwy. 1.801.568.7660 PHONE 1.801.568.7583 INT’L FAX www.dbxpro.com Products Sandy, Utah 84070 1.801.568.7662 FAX customer@dbxpro.com 215s Graphic EQ Dual 15-Band Equalizer s Specifications I N P UT S: FUNCTION SWITCHES: Connectors: 1/4” TRS, female XLR (pin 2 hot) EQ Bypass: Bypasses the graphic equalizer Type: Electronically balanced/unbalanced, RF filtered section in the signal path Impedance: Balanced 40kΩ, unbalanced 20kΩ Low Cut: Activates the 50Hz 12dB/octave Max Input Level: >+21dBu balanced or unbalanced high-pass filter CMRR: >40dB, typically >55dB at 1kHz Range: Selects either +/- 6dB or +/- 12dB slider boost/cut range O UTP UT S: POWER SUPPLY: Connectors: 1/4” TRS, male XLR (pin 2 hot) Operating Voltage: 100-240VAC 50/60Hz Type: Impedance-balanced/unbalanced, RF filtered Power Consumption: 15W Impedance: Balanced 100Ω, unbalanced 50Ω Mains Connection: IEC receptacle Max Output Level: >+21dBu balanced/unbalanced into 2kΩ or greater P HYS I C A L: >+18dBm balanced/unbalanced (into 600Ω) Weight: 4.8 lbs.(2.2 kg) Shipping weight 6.2 lbs. (2.8 kg) Dimensions: 1.75” (4.4cm) H x 6”(15.24cm) D x 19” (48.26cm) W SYSTEM PERFORMANCE: Bandwidth: 20Hz to 20kHz, +0.5/-1dB Frequency Response: <10Hz to >50kHz, +0.5/-3dB Dynamic Range: Typically >112dB Signal-to-Noise: Typically >95dB THD+Noise: <0.003% Interchannel Crosstalk: <-90dB, 20Hz to 20kHz dbx engineers are constantly working to improve the quality of our products. Specifications are, therefore subject to change without notice. dbx Professional 8760 S. Sandy Pkwy. 1.801.568.7660 PHONE 1.801.568.7583 INT’L FAX www.dbxpro.com Products Sandy, Utah 84070 1.801.568.7662 FAX customer@dbxpro.com Part number: 18-0844