Dataman 48UXP www.dataman.com • Low voltage device support • Truly universal 48-pin programmer • Connects via USB 1.1/2.0 or parallel port • Auto switching power supply 110/240V • Device insertion The Dataman 48UXP is a universal device programmer which works detection through the USB or parallel port of your PC. It features a 48-pin • Automatic file format universal pin driver and an expandable TTL pin driver system. Intelligent hardware, including microprocessor and FPGA allow it to program detection & conversion devices you use today and the devices of tomorrow. Designed for both • 3 year warranty laboratory and production environments, the Dataman 48UXP is intelligent, fast and easy to use. • 2 year free software updates Technological Innovation and Performance Leadership Universal Pin Driver - No Adapter Required for DIL Devices The Dataman 48UXP features a universal pin driver, each pin capable of supplying four different voltages or ground. It can also be configured for TTL high/low levels with pull-high/pull-low, high-speed clock and high impedance. This advanced pin design lets you program any DIL device of up to 48 pins without needing an adapter. Unbeatable Programming Speed The Dataman 48UXP's on-board intelligence reduces system overhead to a minimum giving a 100% performance increase over its predecessor when programming high density flash devices. It can program an Intel 32 Mbit flash chip in less then 60 seconds. Programming Speed Test Report Intel 28F320C3B Spansion S29GL032ATFR Blank check 18.6 sec 18.1 sec Program 57.5 sec 54.4 sec FREE adapter Verify 32.5 sec 35.0 sec Total 108.6 sec 107.5 sec included The Dataman 48UXP is much faster than its competitors, making it much more productive with today's high density, multi-megabit memory devices. Device Insertion and Contact Checks Low Voltage Chip Support The Dataman 48UXP performs device insertion and contact checks before it The Dataman 48UXP supports 2.0V ~ 5.0V logic level input/output, and it can programs each device. It can detect poor pin contact and devices that are supply 2.0V~21V analog voltage (such as VCC). The Dataman 48UXP also inserted upside down or in the wrong position. This function protects your supports lower then 2.7V low voltage devices, such as 1.8V, with the use of investment by preventing expensive chip damage due to operator error. special adapters. EPROM and Flash Memory ID Detection and Search Many EPROM and flash memories have a built-in device ID and manufacturer ID. Specifications The Dataman 48UXP can read the device's ID by using the hot key to detect the Socket and Pin Driver ID and compare with its database. It can then determine the chip's vendor and • 48-pin DIL/ ZIF socket with receptacle for 8-pin to 48-pin 300/ 600-mil product number. This feature is especially useful with secondhand chips and devices. devices that have had their part number removed (this function only applied to 28 pin or 32 pin EPROM and Flash). • Four DACs for Vcc, Vpp1, Vpp2 and Vpp3 with 8-bit resolution. Software controllable rise time and current limit protection. Auto-Sensing and Self-Programming • Logic driver supports pull-up/ pull-down or high impedance on all 48 pins To meet mass-production requirements the Dataman 48UXP has implemented with 2.0V-5V level. new technology in both its hardware and software. After entering the Mass- production Mode, the production line operator inserts a device into the ZIF Device Support socket. An LED on the Dataman 48UXP indicates the device is ready and the The Dataman 48UXP supports over 32,000 of the most popular devices in use operator simply removes it and replaces it with a new one. No formal training is today – with future devices being added every day. Dataman 48UXP coverage necessary, adding flexibility, saving time and money. In addition, the Dataman includes the following device types: 48UXP’s auto-sensing feature ensures the device has been inserted correctly and • Memory : PROM, EPROM, EEPROM, Flash, Serial PROM, NVRAM then automatically programs the device. Furthermore, in the mass-production • Logic: PAL, GAL, CEPAL, PEEL, CDLD, EPLD mode the system keyboard is automatically disabled preventing the operator from making any inadvertent mistakes. • Others: OTP/Flash Micro-controllers Project File Save and Load Device Operations Users can create and save project files containing device selection, buffer data Read, blank check, device insertion/ contact check, verify, checksum, EPROM ID and programming set-up options. This project file can then be called upon at check, compare, erase chip, function test, program, memory protect, device any time for future use without having to go through the setup procedure configuration setting, device search, edit buffer, mass production mode, modify again. Your design file can easily be passed to production departments avoiding vector, serialization, H/L byte buffer swap, buffer search. potential mistakes. PLD Vector Tester Serialization Function • Accepts JEDEC test vectors up to 48 pins If your memory devices need individual serial numbers with different increment • 2500V/usec. rise time sequences and initial values, the Dataman 48UXP has an Auto Increment • File format conversion function. This simply increments the serial numbers in the buffer each time a new device is inserted. This saves time and money. • JEDEC, POF, Binary, Intel HEX, Intel EXT HEX, Motorola S, HP 64000ABS, Straight Hex and TEKTRONIC Hex, Automatic detection and conversion. User-Selectable Verify Voltage, One or Two-Pass Verification The Dataman 48UXP lets you select the verify voltage after you have programmed the device, e.g., Vcc, Vcc ±5%, Vcc ±10%. The Vcc voltage can be Package Includes 2.0V to 6.5V. This feature ensures that your device has been programmed • Dataman 48UXP Universal Programmer properly, preventing failures due to programming errors and ensuring data retention. Dimensions: 310x170x40 mm (12.2x6.7x1.6 inches) Weight: 1.9Kg (4.2lbs) Non-DIL Device Support Through Versatile Converters The Dataman 48UXP’s universal pin driver capability lets it program all 48-pin Auto-switching Power Supply DIL devices, including all single-chip Micro-controllers, without adapters. Input: 100 to 240 VAC However due to the number of different packages besides DIL, we have Power consumption : 25 W developed over 100 different adaptors to support these special-package devices. • FREE Universal 44-pin PLCC Adaptor Current Limit and Pin Continuity Checks • Manual The Dataman 48UXP has additional safety features such as a built-in current • Drivers/Software (Compatible with Windows 9x, ME, NT, 2000 and XP) limit and pin continuity check function. This prevents damage from faulty chips during the programming cycle. • Moulded USB and Parallel Cable • Optional range of adaptors and socket convertors also available Free Software Updates via Dataman Website Keeping your programmer software up to date can be a costly business with some programmers. Dataman offers completely FREE software updates whenever Warranty and Support you need them. The latest software is always available from our website. • 30 day, money back guarantee* - if you don’t like it send it back. Universal 44-pin PLCC, QFP, PSOP and TQFP Adapter Supports 44-pin Chips • Three year guarantee – Three years parts and labour warranty, on the 48UXP The universal pin driver on the Dataman 48UXP enables you to support all 44- universal programmer pin chips such as EPLD, EPROM, Flash, EPLD and Micro-controllers. You need only one 44-pin universal adapter which eliminates the need to buy multiple • Life-time technical support – 48UXP technical support is available free via our website and telephone helpdesk for life. adapters and saves money. Moreover, different package devices within 48 pins will only require one adapter. • Two year free software updates – 48UXP software updates are available free for two years via our website. *Applies to orders from UK/US office only www.dataman.com IN THE UK… IN THE US… Available from… Dataman Programmers Ltd. Dataman Inc. Station Road, Maiden Newton 215 East Michigan Avenue Dorset DT2 0AE, UK Orange City, Florida 32763 USA Tel (01300) 320719 Tel (386) 774-7785 Fax (01300) 321012 Fax (386) 774-7796