Dataman 48Pro2C www.dataman.com • Up to 70% faster programming of high- capacity memory devices • Over 70,000 (October 2012) devices supported with new devices added monthly • Intelligent pin drivers operate down to 1.8V so you'll be ready to The Dataman 48Pro2C is a super fast PC based universal 48-pin program the full range programmer with ISP capabilities and USB 2.0 connectivity. The of tomorrows advanced 48Pro2C is built to meet the demands of development labs and field engineers for super fast universal programming. low-voltage devices • ISP capable using the Supporting over 70,000 (October 2012) devices with new support being JTAG interface added monthly, the Dataman 48Pro2C can program without the need for family-specific modules, giving you the freedom to choose the • Hi-speed USB 2.0 optimal device for your design. Using the built-in, in-system programming connectivity (ISP) connector, the programmer is able to program ISP compatible chips in circuit. • Easy to use software compatible with the Hardware latest operating General • The 48Pro2C programmer offers the same advanced features as the 48Pro+ programmer but with up to systems including 70% faster programming of high-capacity memory devices. Windows 8 • FPGA based totally reconfigurable 48 powerful TTL pindrivers provide H/L/pull_up/pull_down and read capability for each pin of the socket. Advanced pindrivers incorporate high-quality high-speed circuitry to deliver signals without overshoot or ground bounce for all supported devices. Improved pin drivers operate • Comprehensive 3 years down to 1.8V so you'll be ready to program the full range of tomorrows advanced low-voltage devices. parts and labour • The programmer performs device insertion and contact tests before programming each device. These capabilities, supported by overcurrent protection and signature-byte check, help prevent chip damage due warranty to operator error. • Selftest capability allows diagnostics in the software to thoroughly check the health of the programmer. • Free life-time software • Built-in protection circuits eliminate damage to the programmer and/or programmed devices due to updates environment or operator failure. All the inputs of the 48Pro2C programmer, including ZIF socket, connection to PC and power supply input are protected against ESD up to 15kV. • The 48Pro2C programmer performs programming verification at the marginal levels of supply voltage, improving programming yield and guaranteeing long data retention. • Wide range of socket converters are available to handle devices in PLCC, SOIC, PSOP, SSOP, TSOP, TSSOP, TQFP, QFN (MLF), SDIP, BGA and other packages. Programmer Specification • Standard device-related commands (read, blank check, program, verify, erase) • 1 x universal programming module (1 x 48-pin DIL ZIF socket and 1 x ISP are enhanced by test functions (insertion test, signature-byte check) and additional special functions (auto-increment serialisation, production mode - connectors) programming starts immediately after chip is inserted). • Power and operation status LEDs • All known data formats are supported. Automatic file format detection and • USB 2.0 high-speed compatible port conversion performed during loading of file. • FPGA based IEEE 1284 slave printer port (useable after upgrade to 48Pro2) • The versatile auto-increment function allows each programmed device to be • Protection against surge and ESD on power supply input and parallel port assigned an individual or incrementing serial number. This function also connection enables the operator to use serial numbers or device identification signatures • Banana jack for ESD wrist strap connection from an external file. • Banana jack for connection to ground • The software provides extensive information about programmable devices including detailed drawings of all available packages. The software also provides explanations of chip labelling (prefixes and suffixes). Module Specification • The software provides full information for ISP implementation: Description of Base Unit (DAC) ISP connector pins, recommended target design and other necessary details. • On-board intelligence: powerful microprocessor and FPGA based state machine • The remote control feature allows the software to be flow controlled by • Three D/A converters for VCCP, VPP1, and VPP2, controllable rise and fall time another application - either using .BAT file commands or DLL file (C/PAS/ • VCCP range 0..8V/1A VBASIC/.NET). • VPP1, VPP2 range 0..26V/1A • Multiple devices can be programmed and tested via a JTAG chain: JTAG chain • Selftest capability (ISP-Jam), JTAG chain (ISP-VME), JTAG chain (ISP-SVF) or JTAG chain (ISP-STP). • Multiple 48Pro2C programmers can be operated from the same PC creating a ZIF Socket high volume production environment with all the benefits of the standard 48Pro2C. Up to four 48Pro2C programmers can be connected simultaneously • 48-pin DIL ZIF socket accepts both 300/600 mil devices up to 48-pin providing a highly scalable gang programming system. • Pindrivers: 48 universal The Dataman 48Pro2C supports over 70,000 (October 2012) of the most popular • VCCP/VPP1/VPP2 can be connected to each pin devices in use today - with new devices being added monthly. Dataman 48Pro2C • Perfect ground for each pin coverage includes the following device types: • FPGA based TTL driver provides H, L, CLK, pull-up, pull-down on all pindriver pins Programmer (ZIF Socket) • Analog pindriver output level selectable from 1.8V up to 26V EPROM, EEPROM, Flash EPROM, NAND Flash, LBA-NAND, mDOC H3, Multi-chip devices, FRAM, MRAM, NV RAM, Serial E(E)PROM, Serial Flash, Configuration (EE) • Current limitation, overcurrent shutdown, power failure shutdown PROM, 1-Wire E(E)PROM, PLD, FPGA, Clocks, Microcontrollers • ESD protection on each pin (IEC1000-4-2: 15kV air, 8kV contact) Programmer (ISP Connector) • Continuity test: each pin is tested before every programming operation Serial E(E)PROM, 1-Wire E(E)PROM, Serial Flash, Microcontrollers, PLD, FPGA ISP Connector Package Includes • 20-pin male type with missinsertion lock • Dataman 48Pro2C Super Fast Universal ISP Programmer • 6 TTL pindrivers, provides H, L, CLK, pull-up, pull-down; level H selectable Dimensions: 195 x 140 x 55mm (7.7 x 5.5 x 2.2inches) from 1.8V up to 5V to handle all (including low-voltage) devices Weight: 0.9Kg (1.98lbs) • 1x VCCP voltage (range 2V..7V/100mA), can be applied to two pins Operating voltage: 100-240V AC • Programmed chip voltage (VCCP) with both source/sink capability and Power consumption: max. 20W active / approx. 2W sleep voltage sense • Moulded USB cable • 1x VPP voltage (range 2V..25V/50mA), can be applied to six pins • ISP cable • Target system supply voltage (range 2V..6V/250mA) • Diagnostic POD for selftest of the programmer • ESD protection on each pin (IEC1000-4-2: 15kV air, 8kV contact) • Diagnostic POD for selftest of the ISP connector • Two output signals, which indicate state of work result = LED OK and LED • Anti-dust cover for ZIF socket Error (active level: min 1.8V) • User manual • Input signal, switch YES! equivalent (active level: max. 0.8V) • Software • Optional range of adapters and socket converters also available Software User Interface • The programmer is driven by an easy-to-use control program with pull-down Warranty and Support • 30 day money back guarantee* - If you don't like it, send it back. menus, hot keys and on-line help. Selecting a device is performed by its class, by manufacturer or simply by typing a fragment of the vendor name and/or • Three year guarantee - Three years parts and labour warranty, on the part number. 48Pro2C universal device programmer. • Life-Time Technical Support - 48Pro2C technical support is available free via our website and telephone helpdesk for life. • Life-Time Software Updates – 48Pro2C software updates are available free via our website for life. *Applies to orders from UK/US offices only www.dataman.com In the UK… In the US… Available from… Dataman Programmers Ltd. Dataman Inc. Unit 2 Newton Hall, Dorchester 215 East Michigan Avenue Road, Maiden Newton, Dorset Orange City, Florida 32763 USA DT2 0BD, UK Tel (386) 774-7785 Tel (01300) 320719 Fax (386) 774-7796 Fax (01300) 321012 Windows is a registered trademark of Microsoft Corporation in the United States and other countries. 10/12