Manufacturers
COSEL UAW500S-12
Description
Cosel UAW500S-12 Power Supply - 516W 12V/43A Thin Profile Industrial Power Supply
Part Number
UAW500S-12
Price
Request Quote
Manufacturer
COSEL
Lead Time
Request Quote
Category
INTEGRATED CIRCUIT
Specifications
AGENCY APPROVALS
UL60950-1, CSA C22.2 No.234, EN60950-1, EN50178 Complies with IEC60950-1
Altitude
Operating: 3,000m (10,000feet) max; Storage:9,000m (30,000feet) max
CASE SIZE/WEIGHT
140X45X278 (308) mm (without terminal block) (WXHXD) /2.4kg max, 2.6kg max (with fan unit)
Conducted Noise
Complies with FCC-B, CISPR22-B, EN55022-B, VCCI-B
COOLING METHOD
Forced Air
DC OUTPUT
VOLTAGE[V]:12V; CURRENT[A]:43A
DRIFT[mV]
48 max
Hold-Up Time [ms]
10typ (ACIN 85/170V, Io equals 100%) 20typ (ACIN 100/200V, Io equals 100%)
Humidity
Operating:10-90%RH (Non condensing)(Refer to DERATING CURVE); Storage:10-90%RH (Non condensing)
Impact
196.1m/s2 (20G), 11ms, once each X, Y and Z axis
Input CURRENT[A]
ACIN 100V:12typ (Io equals 100%); ACIN 200V:6.5typ (Io equals 100%)
Input EFFICIENCY[%]
70typ
Input Frequency[Hz]
50/60 (47 - 63)
Input VOLTAGE[V]
AC85 - 132 / 170 - 264 (Auto-selectable)
Inrush Current[A]
ACIN 100V:15/40typ (Io equals 100%)(Primary Surge Current/Secondary Surge Current); ACIN 200V:30/40typ (Io equals 100%) (Primary Surge Current/Secondary Surge Current)
Isolation
INPUT-OUTPUT:AC3,000V 1minute, Cutoff current is 25mA, DC500V 50O min (At Room Temperature); INPUT-FG:AC2,000V 1minute, Cutoff current is 25mA, DC500V 50O min (At Room Temperature); OUTPUT-FG:AC500V 1minute, Cutoff current is 100mA, DC500V 50O min (At Room Temperature)
Leakage Current [mA]
0.75max (60Hz, According to UL, CSA and VDE)
LINE REGULATION[mV]
80 max
LOAD REGULATION[mV]
120 max
MAX OUTPUT WATTAGE[W]
516
Operating Indication
LED (Green)
Output CURRENT[A]
43
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]
+10%, -5%
Output VOLTAGE[V]
12
OVERCURRENT PROTECTION
Works over 105% of rating and recovers automatically
Overvoltage Portection
Works at 115 - 140% of rating
Remote Sensing
Provided
RIPPLE NOISE[mVp-p]
0 to 50°C:150 max; -10 to 0°C:200 max
RIPPLE[mVp-p]
0 to 50°C:120 max; -10 to 0°C:150 max
START-UP TIME[ms]
800max (ACIN 85/170V, Io equals 100%)
Temperature
Operating:-10 to +60°C; Storage:-20 to +75°C
TEMPERATURE REGULATION[mV]
160 max
Vibration
10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis
Datasheet
Extracted Text
Component Distributors, Inc. ~ www.cdiweb.com ~ 1-800-777-7334 ~ sales@cdiweb.com Ordering information Unit type UA W 125 S -5 -O UAW125S 123456 1Series name R 2Autoranging input 3Output wattage 4Single output 5Output voltage 6Optional C :with Coating G :Low leakage current N :with Cover UAW Please refer to derating curve, because the rated load current depends on cooling method that is convention cooling or forced air. MODEL UAW125S-3 UAW125S-5 UAW125S-12 UAW125S-24 UAW125S-48 MAX OUTPUT WATTAGE[W] 75 125 126 124.8 124.8 DC OUTPUT 3V 25A 5V 25A 12V 10.5A 24V 5.2A 48V 2.6A SPECIFICATIONS MODEL UAW125S-3 UAW125S-5 UAW125S-12 UAW125S-24 UAW125S-48 ( ) VOLTAGE[V] AC85 - 132 / 170 - 264 1 Auto-selectable f ( ) ACIN 100V 2.8typ Io=100% CURRENT[A] ( ) ACIN 200V 1.5typ Io=100% ( ) FREQUENCY[Hz] 50/60 47-63 INPUT EFFICIENCY[%] 72typ 78typ 82typ 85typ 85typ ( )( ) ACIN 100V 30typ Io=100% At cold start INRUSH CURRENT[A] ( )( ) ACIN 200V 60typ Io=100% At cold start LEAKAGE CURRENT[mA] 0.75max (60Hz, According to UL, CSA and VDE) VOLTAGE[V] 3 5 122448 CURRENT[A] 25 25 10.5 5.2 2.6 LINE REGULATION[mV] 20max 20max 48max 96max 192max LOAD REGULATION[mV] 40max 40max 100max 150max 300max *1 0to+50 80max 80max 120max 120max 150max C RIPPLE[mVp-p] 1 -10-0 * 100max 100max 150max 150max 200max C *1 OUTPUT 0to+50 120max 120max 150max 150max 200max C RIPPLE NOISE[mVp-p] *1 -10-0 180max 180max 200max 200max 250max C TEMPERATURE REGULATION[mV] 40max 50max 120max 240max 480max *2 DRIFT[mV] 12max 20max 48max 96max 192max ( , ) START-UP TIME[ms] 500max ACIN 85/170V Io=100% HOLD-UP TIME[ms] 10typ (ACIN 85/170V, Io=100%) 20typ (ACIN 100/200V, Io=100%) , OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 2.85 - 3.6 +10% -5% OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically PROTECTION OVERVOLTAGE PROTECTION 4.00 - 5.25V Works at 115 - 140% of rating CIRCUIT AND ( ) OPERATING INDICATION LED Green OTHERS REMOTE SENSING Provided INPUT-OUTPUT AC3,000V 1minute, Cutoff current = 25mA, DC500V 50M min (At Room Temperature) W , , , ( ) ISOLATION INPUT-FG AC2 000V 1minute Cutoff current = 25mA DC500V 50M min At Room Temperature W , , ( ) OUTPUT-FG AC500V 1minute Cutoff current = 100mA DC500V 50M min At Room Temperature W OPERATING TEMP.,HUMID.AND ALTITUDE -10 to +55 , 10 - 90%RH (Non condensing)(Refer to DERATING CURVE), 3,000m (10,000feet) max C , , ( ), , ( , ) STORAGE TEMP. HUMID.AND ALTITUDE -20 to +75 10 - 90%RH Non condensing 9 000m 30 000feet max C ENVIRONMENT 2 , ( ), , , VIBRATION 10 - 55Hz 19.6m/s 2G 3minutes period 60minutes each along X Y and Z axis 2 IMPACT 196.1m/s (20G), 11ms, once each X, Y and Z axis SAFETY AND , , , AGENCY APPROVALS UL60950-1 CSA C22.2 No.234 EN60950-1 EN50178 Complies with IEC60950-1 NOISE , , , CONDUCTED NOISE Complies with FCC-B CISPR22-B EN55022-B VCCI-B REGULATIONS CASE SIZE/WEIGHT 95 25 200mm (without terminal block)(W H D) / 550g max (without cover) X X X X OTHERS COOLING METHOD Convection/Forced air *1 Measured by 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN:RM101). *2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. A-172 Component Distributors, Inc. ~ www.cdiweb.com ~ 1-800-777-7334 ~ sales@cdiweb.com Component Distributors, Inc. ~ www.cdiweb.com ~ 1-800-777-7334 ~ sales@cdiweb.com UAW125S External view UAW ¶Dimensions with ( )is for reference ¶Dimensions in mm. ¶Tolerance : t 1 ¶Weight : 550g or less (without cover) ¶Safety cover attached I/O Connector Mating Connector Terminal ¶Cover is optional B4B-XH-A XHP-4 Chain: SXH-001T-P0.6 ¶Mounting torque: Loose: BXH-001T-P0.6 . . (Mfr.J.S.T.) 1.2N m(12.8kgf cm)max Performance data ( ) ( ) ¡STATIC CHARACTERISTICS UAW125S-5 RISE TIME & FALL TIME UAW125S-5 ¡ ( ) ¡OVERCURRENT CHARACTERISTICS UAW125S-5 ¡DERATING CURVE A-173 Component Distributors, Inc. ~ www.cdiweb.com ~ 1-800-777-7334 ~ sales@cdiweb.com Component Distributors, Inc. ~ www.cdiweb.com ~ 1-800-777-7334 ~ sales@cdiweb.com Ordering information Unit type UA W 250 S -5 -O UAW250S 123456 1Series name R 2Autoranging input 3Output wattage 4Single output 5Output voltage 6Optional C :with Coating G :Low leakage current N :with Cover R :with Remote ON/OFF UAW Please refer to derating curve, because the rated load current depends on cooling method that is convention cooling or forced air. MODEL UAW250S-3 UAW250S-5 UAW250S-12 UAW250S-24 UAW250S-48 MAX OUTPUT WATTAGE[W] 150 250 258 264 249.6 DC OUTPUT 3V 50A 5V 50A 12V 21.5A 24V 11A 48V 5.2A SPECIFICATIONS MODEL UAW250S-3 UAW250S-5 UAW250S-12 UAW250S-24 UAW250S-48 ( ) VOLTAGE[V] AC85 - 132 / 170 - 264 1 Auto-selectable f ( ) ACIN 100V 6typ Io=100% CURRENT[A] ( ) ACIN 200V 3typ Io=100% ( ) FREQUENCY[Hz] 50/60 47-63 INPUT EFFICIENCY[%] 70typ 77typ 80typ 83typ 83typ ( )( ) ACIN 100V 15/40typ Io=100% Primary Surge Current/Secondary Surge Current INRUSH CURRENT[A] ( )( ) ACIN 200V 30/40typ Io=100% Primary Surge Current/Secondary Surge Current LEAKAGE CURRENT[mA] 0.75max (60Hz, According to UL, CSA and VDE) VOLTAGE[V] 3 5 122448 CURRENT[A] 50 50 21.5 11 5.2 LINE REGULATION[mV] 40max 40max 80max 100max 192max LOAD REGULATION[mV] 80max 80max 120max 160max 300max *1 0to+50 80max 80max 120max 120max 150max C RIPPLE[mVp-p] 1 -10-0 * 120max 120max 150max 150max 200max C *1 OUTPUT 0to+50 120max 120max 150max 150max 350max C RIPPLE NOISE[mVp-p] *1 -10-0 180max 180max 200max 200max 400max C TEMPERATURE REGULATION[mV] 40max 50max 120max 240max 480max *2 DRIFT[mV] 12max 20max 48max 96max 192max ( , ) START-UP TIME[ms] 800max ACIN 85/170V Io=100% HOLD-UP TIME[ms] 10typ (ACIN 85/170V, Io=100%) 20typ (ACIN 100/200V, Io=100%) , OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 2.85 - 3.6 +10% -5% OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically PROTECTION OVERVOLTAGE PROTECTION 4.00 - 5.25V Works at 115 - 140% of rating CIRCUIT AND ( ) OPERATING INDICATION LED Green OTHERS REMOTE SENSING Provided INPUT-OUTPUT AC3,000V 1minute, Cutoff current = 25mA, DC500V 50M min (At Room Temperature) W , , , ( ) ISOLATION INPUT-FG AC2 000V 1minute Cutoff current = 25mA DC500V 50M min At Room Temperature W , , ( ) OUTPUT-FG AC500V 1minute Cutoff current = 100mA DC500V 50M min At Room Temperature W OPERATING TEMP.,HUMID.AND ALTITUDE -10 to +55 , 10 - 90%RH (Non condensing)(Refer to DERATING CURVE), 3,000m (10,000feet) max C , , ( ), , ( , ) STORAGE TEMP. HUMID.AND ALTITUDE -20 to +75 10 - 90%RH Non condensing 9 000m 30 000feet max C ENVIRONMENT 2 , ( ), , , VIBRATION 10 - 55Hz 19.6m/s 2G 3minutes period 60minutes each along X Y and Z axis 2 IMPACT 196.1m/s (20G), 11ms, once each X, Y and Z axis SAFETY AND , , , AGENCY APPROVALS UL60950-1 CSA C22.2 No.234 EN60950-1 EN50178 Complies with IEC60950-1 NOISE , , , CONDUCTED NOISE Complies with FCC-B CISPR22-B EN55022-B VCCI-B REGULATIONS CASE SIZE/WEIGHT 95 35 278mm (without terminal block)(W H D) /1.1kg max (without cover) X X X X OTHERS COOLING METHOD Convection/Forced air *1 Measured by 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN:RM101). *2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. A-174 Component Distributors, Inc. ~ www.cdiweb.com ~ 1-800-777-7334 ~ sales@cdiweb.com Component Distributors, Inc. ~ www.cdiweb.com ~ 1-800-777-7334 ~ sales@cdiweb.com UAW250S External view UAW ¶Mounting torque: . . I/O Connector Mating Connector Terminal 1.2N m(12.8kgf cm)max CN1 B4B-XH-A XHP-4 Chain: SXH-001T-P0.6 ¶Output Current of TB1 Loose: BXH-001T-P0.6 CN2 B3B-XH-A XHP-3 Chain: SXH-001T-P0.6 should be less than 25A Loose: BXH-001T-P0.6 ¶Tolerance : t 1 CN1 B3B-XH-A XHP-3 Chain: SXH-001T-P0.6 Loose: BXH-001T-P0.6 ¶Weight : 1.1kgs or less(without cover) CN2 B2B-XH-A XHP-2 Chain: SXH-001T-P0.6 ¶Terminal Block cover attached Loose: BXH-001T-P0.6 (Mfr.J.S.T.) ¶Cover is optional Performance data ( ) ( ) ¡STATIC CHARACTERISTICS UAW250S-5 RISE TIME & FALL TIME UAW250S-5 ¡ ( ) ¡OVERCURRENT CHARACTERISTICS UAW250S-5 ¡DERATING CURVE 6.0 5.0 4.0 3.0 2.0 1.0 0 10 20 30 40 50 60 70 OUTPUT CURRENT [A] A-175 Component Distributors, Inc. ~ www.cdiweb.com ~ 1-800-777-7334 ~ sales@cdiweb.com OUTPUT VOLTAGE [V] Component Distributors, Inc. ~ www.cdiweb.com ~ 1-800-777-7334 ~ sales@cdiweb.com Ordering information Unit type UA W 500 S -5 -O UAW500S 123456 1Series name R 2Autoranging input 3Output wattage 4Single output 5Output voltage 6Optional C :with Coating F :with Fan unit G :Low leakage current UAW RoHS : Please consult us for details The forced air with the fan is necessary. MODEL UAW500S-3 UAW500S-5 UAW500S-12 UAW500S-24 MAX OUTPUT WATTAGE[W] 300 500 516 528 DC OUTPUT 3V 100A 5V 100A 12V 43A 24V 22A SPECIFICATIONS MODEL UAW500S-3 UAW500S-5 UAW500S-12 UAW500S-24 ( ) VOLTAGE[V] AC85 - 132 / 170 - 264 1 Auto-selectable f ( ) ACIN 100V 12typ Io=100% CURRENT[A] ( ) ACIN 200V 6.5typ Io=100% ( ) FREQUENCY[Hz] 50/60 47-63 INPUT EFFICIENCY[%] 70typ 77typ 80typ 83typ ( )( ) ACIN 100V 15/40typ Io=100% Primary Surge Current/Secondary Surge Current INRUSH CURRENT[A] ( )( ) ACIN 200V 30/40typ Io=100% Primary Surge Current/Secondary Surge Current LEAKAGE CURRENT[mA] 0.75max (60Hz, According to UL, CSA and VDE) VOLTAGE[V] 3512 24 CURRENT[A] 100 100 43 22 LINE REGULATION[mV] 40max 40max 80max 100max LOAD REGULATION[mV] 80max 80max 120max 160max *1 0to+50 100max 100max 120max 120max C RIPPLE[mVp-p] 1 -10-0 * 120max 120max 150max 150max C *1 OUTPUT 0to+50 120max 120max 150max 150max C RIPPLE NOISE[mVp-p] *1 -10-0 180max 180max 200max 200max C TEMPERATURE REGULATION[mV] 40max 50max 160max 200max *2 DRIFT[mV] 12max 20max 48max 96max ( , ) START-UP TIME[ms] 800max ACIN 85/170V Io=100% HOLD-UP TIME[ms] 10typ (ACIN 85/170V, Io=100%) 20typ (ACIN 100/200V, Io=100%) , OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 2.85 - 3.6 +10% -5% OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically PROTECTION OVERVOLTAGE PROTECTION 4.00 - 5.25V Works at 115 - 140% of rating CIRCUIT AND ( ) OPERATING INDICATION LED Green OTHERS REMOTE SENSING Provided INPUT-OUTPUT AC3,000V 1minute, Cutoff current = 25mA, DC500V 50M min (At Room Temperature) W , , , ( ) ISOLATION INPUT-FG AC2 000V 1minute Cutoff current = 25mA DC500V 50M min At Room Temperature W , , ( ) OUTPUT-FG AC500V 1minute Cutoff current = 100mA DC500V 50M min At Room Temperature W OPERATING TEMP.,HUMID.AND ALTITUDE -10 to +60 , 10 - 90%RH (Non condensing)(Refer to DERATING CURVE), 3,000m (10,000feet) max C , , ( ), , ( , ) STORAGE TEMP. HUMID.AND ALTITUDE -20 to +75 10 - 90%RH Non condensing 9 000m 30 000feet max C ENVIRONMENT 2 , ( ), , , VIBRATION 10 - 55Hz 19.6m/s 2G 3minutes period 60minutes each along X Y and Z axis 2 IMPACT 196.1m/s (20G), 11ms, once each X, Y and Z axis SAFETY AND , , , AGENCY APPROVALS UL60950-1 CSA C22.2 No.234 EN60950-1 EN50178 Complies with IEC60950-1 NOISE , , , CONDUCTED NOISE Complies with FCC-B CISPR22-B EN55022-B VCCI-B REGULATIONS CASE SIZE/WEIGHT 140 45 278 (308) mm (without terminal block)(W H D) /2.4kg max, 2.6kg max (with fan unit) X X X X OTHERS COOLING METHOD Forced air *1 Measured by 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN:RM101). *2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. A-176 Component Distributors, Inc. ~ www.cdiweb.com ~ 1-800-777-7334 ~ sales@cdiweb.com Component Distributors, Inc. ~ www.cdiweb.com ~ 1-800-777-7334 ~ sales@cdiweb.com UAW500S External view UAW "A" means connection is not possible. ¶Dimensions with ( )is for reference. ¶Weight : 2.4kg or less (2.6kg or less when Fan unit is attached) ¶Tolerance : t1 ¶Dimensions in mm. ¶Cover : Aluminum ¶Maximum 50A per pin of TB2. I/O Connector Mating Connector Terminal CN1 S10B-ZR ZHR-10 Chain: SZH-002T-P0.5 ¶Mounting torque: Loose: BZH-002T-P0.5 . . 1.2N m(12.8kgf cm)max (Mfr.J.S.T.) Performance data ( ) STATIC CHARACTERISTICS UAW500S-5 ( ) ¡ ¡RISE TIME & FALL TIME UAW500S-5 ( ) OVERCURRENT CHARACTERISTICS UAW500S-5 DERATING CURVE ¡ ¡ A-177 Component Distributors, Inc. ~ www.cdiweb.com ~ 1-800-777-7334 ~ sales@cdiweb.com
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the UAW500S-12 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Cosel CBS1002403 DC/DC Converter. 18-36DC Input Voltage | 100 W
Cosel CBS1002415 15V/6.7A DC/DC Converter
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods