Manufacturers
COSEL PBA300F-24
Description
Cosel PBA300F-24 Power Supply - Power Supply; 24 V; 14 A @ 100 V; 85 to 264; 150 mV (Max.); 96 mV (Max.)
Part Number
PBA300F-24
Price
Request Quote
Manufacturer
COSEL
Lead Time
Request Quote
Category
INTEGRATED CIRCUIT
Specifications
Agency Approvals
UL60950-1, C-UL(CSA60950-1), EN60950-1, EN50178 Complies with DEN-AN
Altitude
Operating:9,000m (30,000feet) max; Storage:9,000m (30,000feet) max
Case Size/Weight
102X42X170mm [4.02X1.65X6.69 inches] (without terminal block and screw) (WXHXD) /1.0kg max
Conducted Noise
Complies with FCC Part15 classB, VCCI-B, CISPR22-B, EN55011-B, EN55022-B
Cooling method
Forced cooling (internal fan)
DC Output
ACIN 100V:24V 14A; ACIN 200V:24V 14(16.5)A
Drift[mV]
96max
Frequency[Hz]
50/60 (47 - 63)
Harmonic Attenuator
Complies with IEC61000-3-2
Hold-Up Time[ms]
20typ (ACIN 100/200V, Io equals 100%)
Humidity
Operating:20 - 90%RH (Non condensing); Storage:20 - 90%RH (Non condensing)
Impact
196.1m/s2 (20G), 11ms, once each X, Y and Z axis
INPUT CURRENT[A]
ACIN 100V:4.1typ; ACIN 200V:2typ
Input EFFICIENCY[%]
ACIN 100V:79typ; ACIN 200V:82typ
Input Voltage[V]
AC85 - 264 1f or DC120 - 350 (AC50 or DC70 Please refer to the instruction manual 7. option *4)
Inrush Current[A]
ACIN 100V 20/40typ (Io is 100%) (Primary inrush current /Secondary inrush current) (More then 3 sec. to re-start); ACIN 200V 40/40typ (Io is 100%) (Primary inrush current /Secondary inrush current) (More then 3 sec. to re-start)
Isolation
INPUT-OUTPUT-RC:AC3,000V 1minute, Cutoff current equals 10mA, DC500V 50MWmin (At Room Temperature); INPUT-FG:AC2,000V 1minute, Cutoff current equals 10mA, DC500V 50MWmin (At Room Temperature); OUTPUT-RC-AUX-FG:AC500V 1minute, Cutoff current equals 100mA, DC500V 50MWmin (At Room Temperature); OUTPUT-RC-AUX:AC500V 1minute, Cutoff current equals 100mA, DC500V 50MWmin (At Room Temperature)
LEAKAGE CURRENT[mA]
0.45/0.75max (ACIN 100V/240V 60Hz, Io equals 100%, According to IEC60950-1,DENAN)
Line Regulation[mV]
96max
Load Regulation[mV]
150max
Max Output Wattage[W]
336
Operating Indication
LED (Green)
Output Current[A]
ACIN 100V:14; ACIN 200V:14(16.5)
Output Voltage Adjustment Range[V]
16.50 - 26.40
Output Voltage Setting[V]
24.00 - 24.96
Output Voltage[V]
24
Overcurrent protection
Works over 105% of rated current or 101% of peak current and recovers automatically
Overvoltage Protection[V]
28.8 - 37.2
Power Factor
ACIN 100V:0.98typ (Io is 100%); ACIN 200V:0.95typ (Io is 100%)
Remote On/Off
Provided
Remote Sensing
Provided
Ripple Noise[mVp-p]
0 to +50°C: 150max; -20 - 0°C: 180max
Ripple[mVp-p]
0 to +50°C: 120max; -20 - 0°C: 160max
Start-Up Time[ms]
300typ(ACIN 100/200V, Io equals 100%) *Start-up time is 500ms typ for less than 1minute of applying input again from turning off the input voltage.
Temperature
Operating:-20 to +71°C; Storage:-20 to +75°C
Temperature Regulation[mV]
0 to +50°C:240max; -20 to 50°C:290max
Vibration
10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis
Datasheet
Extracted Text
Ordering information AC-DC Power Supplies Enclosed type PBA/PBW PB A 300 F -5 -O PBA300F 123456 1Series name R Recommended EMI/EMC Filter 2Single output NAC-06-472 3Output wattage 4Universal input 5Output voltage 6Optional *5 C :with Coating G :Low leakage current U :Operation stop voltage High voltage pulse noise type : NAP series is set at a lower value Low leakage current type : NAM series F3 :Reverse air exhaust *The EMI/EMC Filter is recommended type *to connect with several devices. F4 :Low speed fan N1 :with DIN rail Refer to instruction manual 7.1. MODEL PBA300F-3R3 PBA300F-5 PBA300F-7R5 PBA300F-12 PBA300F-15 PBA300F-24 PBA300F-36 PBA300F-48 MAX OUTPUT WATTAGE[W] 198 300 300 324 330 336 324 336 ACIN 100V 3.3V 60A 5V 60A 7.5V 40A 12V 27A 15V 22A 24V 14A 36V 9A 48V 7A DC OUTPUT ACIN 200V 3 3.3V 60A 5V 60A 7.5V 40A 12V 27A 15V 22A 24V 14(16.5)A 36V 9A 48V 7A * SPECIFICATIONS MODEL PBA300F-3R3 PBA300F-5 PBA300F-7R5 PBA300F-12 PBA300F-15 PBA300F-24 PBA300F-36 PBA300F-48 VOLTAGE[V] AC85 - 264 1 or DC120 - 350 (AC50 or DC70 Please refer to the instruction manual 7. option 4) f * ACIN 100V 3typ 4.1typ CURRENT[A] ACIN 200V 1.6typ 2typ ( ) FREQUENCY[Hz] 50/60 47-63 ACIN 100V 68typ 74typ 76typ 78typ 78typ 79typ 81typ 79typ EFFICIENCY[%] INPUT ACIN 200V 71typ 77typ 79typ 81typ 81typ 82typ 84typ 82typ ACIN 100V 0.98typ (Io=100%) POWER FACTOR ( ) ACIN 200V 0.95typ Io=100% ACIN 100V 20/40typ (Io=100%)(Primary inrush current /Secondary inrush current)(More then 3 sec. to re-start) INRUSH CURRENT[A] ( )( )( ) ACIN 200V 40/40typ Io=100% Primary inrush current /Secondary inrush current More then 3 sec. to re-start LEAKAGE CURRENT[mA] 0.45/0.75max (ACIN 100V/240V 60Hz, Io=100%, According to IEC60950-1,DENAN) VOLTAGE[V] 3.3 5 7.5 12 15 24 36 48 ACIN 100V 60 60 40 27 22 14 9 7 CURRENT[A] 3 ( ) ACIN 200V* 60 60 40 27 22 14 16.5 97 LINE REGULATION[mV] 20max 20max 36max 48max 60max 96max 144max 192max LOAD REGULATION[mV] 40max 40max 60max 100max 120max 150max 150max 300max 0to+50 *1 80max 80max 120max 120max 120max 120max 150max 150max C RIPPLE[mVp-p] 1 -20-0 * 140max 140max 160max 160max 160max 160max 160max 400max C 0to+50 *1 120max 120max 150max 150max 150max 150max 200max 200max C OUTPUT RIPPLE NOISE[mVp-p] 1 -20-0 * 160max 160max 180max 180max 180max 180max 240max 500max C 0to+50 *1 40max 50max 75max 120max 150max 240max 360max 480max C TEMPERATURE REGULATION[mV] 1 -20 to +50 * 60max 75max 120max 180max 180max 290max 440max 600max C DRIFT[mV] *2 12max 20max 30max 48max 60max 96max 144max 192max ( , ) START-UP TIME[ms] 300typ ACIN 100/200V Io=100% Start-up time is 500ms typ for less than 1minute of applying input again from turning off the input voltage. * HOLD-UP TIME[ms] 20typ (ACIN 100/200V, Io=100%) OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 2.64 - 3.96 3.96 - 6.00 5.25 - 8.25 8.25 - 13.20 10.50 - 16.50 16.50 - 26.40 25.20 - 39.60 38.40 - 56.00 OUTPUT VOLTAGE SETTING[V] 3.30 - 3.40 5.00 - 5.15 7.50 - 7.80 12.00 - 12.48 15.00 - 15.60 24.00 - 24.96 36.00 - 37.44 48.00 - 49.92 OVERCURRENT PROTECTION Works over 105% of rated current or 101% of peak current and recovers automatically OVERVOLTAGE PROTECTION[V] 4.3 - 6.3 6.5 - 8.0 9.0 - 11.6 14.4 - 18.6 18.0 - 23.3 28.8 - 37.2 43.2 - 54.0 57.6 - 80.0 PROTECTION ( ) CIRCUIT AND OPERATING INDICATION LED Green OTHERS REMOTE SENSING Provided REMOTE ON/OFF Provided INPUT-OUTPUT RC AC3,000V 1minute, Cutoff current = 10mA, DC500V 50M min (At Room Temperature) - W , , , ( ) INPUT-FG AC2 000V 1minute Cutoff current = 10mA DC500V 50M min At Room Temperature W ISOLATION OUTPUT RC AUX-FG AC500V 1minute, Cutoff current = 100mA, DC500V 50M min (At Room Temperature) - - W , , ( ) OUTPUT-RC AUX AC500V 1minute Cutoff current = 100mA DC500V 50M min At Room Temperature - W OPERATING TEMP.,HUMID.AND ALTITUDE -20 to +71 (Required Derating), 20 - 90%RH (Non condensing) 3,000m (10,000feet) max C , , ( ) , ( , ) STORAGE TEMP. HUMID.AND ALTITUDE -20 to +75 20 - 90%RH Non condensing 9 000m 30 000feet max C ENVIRONMENT 2 VIBRATION 10 - 55Hz, 19.6m/s (2G), 3minutes period, 60minutes each along X, Y and Z axis 2 ( ), , , IMPACT 196.1m/s 20G 11ms once each X Y and Z axis AGENCY APPROVALS (At only AC input) UL60950-1, C-UL(CSA60950-1), EN60950-1, EN50178 Complies with DEN-AN SAFETY AND , , , , NOISE CONDUCTED NOISE Complies with FCC Part15 classB VCCI-B CISPR22-B EN55011-B EN55022-B REGULATIONS HARMONIC ATTENUATOR Complies with IEC61000-3-2 ( )( ) CASE SIZE/WEIGHT 102 42 170mm [4.02 1.65 6.69 inches] without terminal block and screw W H D /1.0kg max X X X X X X OTHERS ( ) COOLING METHOD Forced cooling internal fan *1 Measured by 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN *5 Please contact us about safety approvals for the model with option. :RM101). * A sound may occur from power supply at pulse loading. *2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C. *3 () means peak current. Peak loading for 10s. And Duty 35% max, refer to Instruction manual in detail. *4 Derating is required.Consult us for details. PBA/PBW-16 H V.ADJ PBA300F PBA/PBW Block diagram FUSE INRUSH AC IN NOISE RECTIFIER CURRENT 85 - 264V FILTER LIMIT 250V10A FG RECTIFIER INVERTER DC OUT AND FILTER THERMAL ±M PROTECTION CURRENT OVER VOLTAGE SENSING PROTECTION ACTIVE FILTER RECTIFIER CONTROL SWITCHING CONTROL ±S(REMOTE SENSING) AND DEVICE FILTER RC(REMOTE ON / OFF) MASTER VOLTAGE CURRENT VB(VOLTAGE BALANCE) SLAVE SENSING SENSING CB(CURRENT BALANCE) CONTROL VOLTAGE INTERNAL CONTROL FAN ALARM PG(POWER GOOD) SENSING REGULATOR AUX(12 V 0.1A) External view 4-M4 Mounting Hole 54 74±0.5 [2.13] [2.91] 2-M4 Name plate (14) 25max Mounting Hole M4 Terminal cover [0.55] [0.98] (Bottom sides) AC(L) AC(N) FG( ) Output terminal(-) Output terminal(+) M4 CN3 CN2 (15.5) Name plate 28.5 ±0.5 64 CN1 [1.12] [2.52] [0.61] 170 6max (30) [6.69] [0.24] LED [1.18] Output voltage adjustable potentiometer AIR FLOW ¶ Tolerance : ±1 [±0.04] ¶ Weight : 1.0kg max ¶ PCB Material/thickness : FR-4 / 1.6mm [0.06] ¶ Chassis material : Aluminum ¶ Dimensions in mm, [ ]= inches ¶ Mounting torque : 1.2N • m max ¶ Screw tightening torque : 1.6N • m max ¶ The housing for the remote sensing unused is mounted on CN1 ¶ Please connect safety ground to FG terminal on the unit. PBA/PBW-17 (6) 10 7 [0.39][0.28] [0.24] 8.6 [0.34] 12 (50) [1.97] [0.47] (23.5) [0.93] (75) 12 [2.95] [0.47] (87) [3.43] ±0.5 42 50.5 20 12 [1.65] [1.99] [0.79] [0.47] 102 [4.02] Ordering information AC-DC Power Supplies Enclosed type PBA/PBW PB A 600 F -5 -O PBA600F 123456 1Series name R Recommended EMI/EMC Filter 2Single output NAC-16-472 3Output wattage 4Universal input 5Output voltage 6Optional *6 C :with Coating G :Low leakage current U :Operation stop voltage High voltage pulse noise type : NAP series is set at a lower value Low leakage current type : NAM series F1 :With Long-Life fan *The EMI/EMC Filter is recommended F3 :Reverse air exhaust *to connect with several devices. type F4 :Low speed fan Refer to instruction manual 7.1. MODEL PBA600F-3R3 PBA600F-5 PBA600F-7R5 PBA600F-12 PBA600F-15 PBA600F-24 PBA600F-36 PBA600F-48 MAX OUTPUT WATTAGE[W] 396 600 600 636 645 648 648 624 ACIN 100V 3.3V 120A 5V 120A 7.5V 80A 12V 53A 15V 43A 24V 27A 36V 18A 48V 13A DC OUTPUT ACIN 200V 3 3.3V 120A 5V 120A 7.5V 80A 12V 53A 15V 43A 24V 27(31)A 36V 18A 48V 13A * SPECIFICATIONS MODEL PBA600F-3R3 PBA600F-5 PBA600F-7R5 PBA600F-12 PBA600F-15 PBA600F-24 PBA600F-36 PBA600F-48 VOLTAGE[V] AC85 - 264 1 or DC120 - 350 (AC50 or DC70 Please refer to the instruction manual 7. option 5) f * ACIN 100V 5.8typ 8.2typ CURRENT[A] ACIN 200V 3typ 4.1typ ( ) FREQUENCY[Hz] 50/60 47-63 ACIN 100V 70typ 75typ 76typ 79typ 79typ 81typ 82typ 81typ EFFICIENCY[%] INPUT ACIN 200V 72typ 77typ 79typ 82typ 82typ 84typ 84typ 83typ ACIN 100V 0.98typ (Io=100%) POWER FACTOR ( ) ACIN 200V 0.95typ Io=100% ACIN 100V 20/40typ (Io=100%)(Primary inrush current /Secondary inrush current)(More than 3 sec. to re-start) INRUSH CURRENT[A] ( )( )( ) ACIN 200V 40/40typ Io=100% Primary inrush current /Secondary inrush current More than 3 sec. to re-start LEAKAGE CURRENT[mA] 0.45/0.75max (ACIN 100V/240V 60Hz, Io=100%, According to IEC60950-1, DENAN) VOLTAGE[V] 3.3 5 7.5 12 15 24 36 48 ACIN 100V 120 120 80 53 43 27 18 13 CURRENT[A] 3 ( ) ACIN 200V* 120 120 80 53 43 27 31 18 13 LINE REGULATION[mV] 20max 20max 36max 48max 60max 96max 144max 192max LOAD REGULATION[mV] 40max 40max 60max 100max 120max 150max 150max 300max 0to+50 *1 80max 80max 120max 120max 120max 120max 150max 150max C RIPPLE[mVp-p] 1 -20-0 * 140max 140max 160max 160max 160max 160max 160max 400max C 0to+50 *1 120max 120max 150max 150max 150max 150max 200max 200max C OUTPUT RIPPLE NOISE[mVp-p] 1 -20-0 * 160max 160max 180max 180max 180max 180max 240max 500max C 0to+50 *1 40max 50max 75max 120max 150max 240max 360max 480max C TEMPERATURE REGULATION[mV] 1 -20 to +50 * 60max 75max 120max 180max 180max 290max 440max 600max C DRIFT[mV] *2 12max 20max 30max 48max 60max 96max 144max 192max ( , ) START-UP TIME[ms] 400typ ACIN 100/200V Io=100% Start-up time is 500ms typ for less than 1minute of applying input again from turning off the input voltage. * HOLD-UP TIME[ms] 20typ (ACIN 100/200V, Io=100%) OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 2.64 - 3.96 3.96 - 6.00 5.25 - 8.25 8.25 - 13.20 10.50 - 16.50 16.50 - 26.40 25.20 - 39.60 38.40 - 56.00 OUTPUT VOLTAGE SETTING[V] 3.30 - 3.40 5.00 - 5.15 7.50 - 7.80 12.00 - 12.48 15.00 - 15.60 24.00 - 24.96 36.00 - 37.44 48.00 - 49.92 OVERCURRENT PROTECTION Works over 105% of rated current or 101% of peak current and recovers automatically OVERVOLTAGE PROTECTION[V] *4 Vo+0.66 - 1.32 Vo+1.0 - 2.0 Vo+1.5 - 3.0 Vo+2.4 - 4.8 Vo+3.0 - 6.0 Vo+4.8 - 9.6 Vo+7.2 - 14.4 Vo+4.8 - 12.0 PROTECTION ( ) CIRCUIT AND OPERATING INDICATION LED Green OTHERS REMOTE SENSING Provided REMOTE ON/OFF Provided INPUT-OUTPUT RC AC3,000V 1minute, Cutoff current = 10mA, DC500V 50M min (At Room Temperature) - W , , , ( ) INPUT-FG AC2 000V 1minute Cutoff current = 10mA DC500V 50M min At Room Temperature W ISOLATION OUTPUT RC AUX-FG AC500V 1minute, Cutoff current = 100mA, DC500V 50M min (At Room Temperature) - - W , , ( ) OUTPUT-RC AUX AC500V 1minute Cutoff current = 100mA DC500V 50M min At Room Temperature - W OPERATING TEMP.,HUMID.AND ALTITUDE -20 to +71 (Required Derating), 20 - 90%RH (Non condensing) 3,000m (10,000feet) max C , , ( ) , ( , ) STORAGE TEMP. HUMID.AND ALTITUDE -20 to +75 20 - 90%RH Non condensing 9 000m 30 000feet max C ENVIRONMENT 2 VIBRATION 10 - 55Hz, 19.6m/s (2G), 3minutes period, 60minutes each along X, Y and Z axis 2 ( ), , , IMPACT 196.1m/s 20G 11ms once each X Y and Z axis AGENCY APPROVALS (At only AC input) UL60950-1, C-UL(CSA60950-1), EN60950-1, EN50178 Complies with DEN-AN SAFETY AND , , , , NOISE CONDUCTED NOISE Complies with FCC Part15 classB VCCI-B CISPR22-B EN55011-B EN55022-B REGULATIONS HARMONIC ATTENUATOR Complies with IEC61000-3-2 ( )( ) CASE SIZE/WEIGHT 120 61 190mm [4.72 2.4 7.48 inches] without terminal block and screw W H D /1.6kg max X X X X X X OTHERS ( ) COOLING METHOD Forced cooling internal fan *1 Measured by 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN *5 Derating is required.Consult us for details. :RM101). *6 Please contact us about safety approvals for the model with option. *2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C. * A sound may occur from power supply at pulse loading. *3 () means peak current. Peak loading for 10s. And Duty 35% max, refer to Instruction manual in detail. *4 Overvoltage protection circuit to follow to output voltage setting. Standard overvoltage protection circuit is please contact us for details. PBA/PBW-18 CN3 CN2 CN1 AC AC (L) FG (N) PBA600F PBA/PBW Block diagram FUSE INRUSH AC IN NOISE RECTIFIER CURRENT 85 - 264V FILTER LIMIT 250V15A FG RECTIFIER INVERTER DC OUT AND FILTER THERMAL ±M PROTECTION CURRENT OVER VOLTAGE SENSING PROTECTION ACTIVE FILTER RECTIFIER CONTROL SWITCHING CONTROL ±S(REMOTE SENSING) AND DEVICE FILTER RC(REMOTE ON / OFF) MASTER VOLTAGE CURRENT VB(VOLTAGE BALANCE) SLAVE SENSING SENSING CB(CURRENT BALANCE) CONTROL VOLTAGE INTERNAL CONTROL FAN ALARM PG(POWER GOOD) SENSING REGULATOR AUX(12 V 0.1A) External view Name plate 4-M4 (13.8) M4 Input terminal cover 20max Name plate Mounting Hole [0.54] [0.79] (Bottom sides) AC(L) AC(N) FG( ) CN3 Output CN2 terminal(-) CN1 LED Output terminal(+) Output terminal cover 25max ±0.5 24 150 (18) M5 [0.98] [0.94] [5.91] [0.71] Output voltage 190 ¶1(F1:190.5) 6max (48.5) adjustable potentiometer [0.24] [7.48] [1.91] 8-M4 61 Mounting Hole [2.4] (Both sides) AIR FLOW ¶ Tolerance : ±1 [±0.04] ¶ Weight : 1.6kg max ¶ PCB Material/thickness : FR-4 / 1.6mm [0.06] ¶ Chassis material : Aluminum ±0.5 24 150 ¶ Dimensions in mm, [ ]= inches [0.94] [5.91] ¶ Mounting torque : 1.2N · m(12.8kgf·cm)max ¶ Screw tightening torque : M4 1.6N • m(16.9kgf • cm)max M5 2.5N • m(24.5kgf • cm)max ¶ The housing for the remote sensing unused is mounted on CN1 ¶1 F1(Optional):190.5 ¶ Please connect safety ground to FG terminal on the unit. PBA/PBW-19 (6) 10 7 [0.39][0.28] [0.24] 8.7 [0.34] (92.5) [3.64] 27.5 [1.08] (52.5) 14 17 14 [0.55] [0.67] [0.55] [2.07] ±0.5 12.5 38 ±0.5 10 100 [0.49] [1.5] [3.94] [0.39] 120 [4.72] Ordering information AC-DC Power Supplies Enclosed type PBA/PBW PB A 1000 F -5 -O PBA1000F 123456 1Series name R Recommended EMI/EMC Filter 2Single output NAC-20-472 3Output wattage 4Universal input 5Output voltage 6Optional *6 C :with Coating G :Low leakage current U :Operation stop voltage High voltage pulse noise type : NAP series is set at a lower value Low leakage current type : NAM series F1 :With Long-Life fan *The EMI/EMC Filter is recommended F3 :Reverse air exhaust *to connect with several devices. type F4 :Low speed fan Refer to instruction manual 7.1. MODEL PBA1000F-3R3 PBA1000F-5 PBA1000F-7R5 PBA1000F-12 PBA1000F-15 PBA1000F-24 PBA1000F-36 PBA1000F-48 MAX OUTPUT WATTAGE[W] 660 1000 1005 1056 1050 1056 1044 1056 ACIN 100V 3.3V 200A 5V 200A 7.5V 134A 12V 88A 15V 70A 24V 44A 36V 29A 48V 22A DC OUTPUT ACIN 200V 3 3.3V 200A 5V 200A 7.5V 134A 12V 88A 15V 70A 24V 44(51)A 36V 29A 48V 22A * SPECIFICATIONS MODEL PBA1000F-3R3 PBA1000F-5 PBA1000F-7R5 PBA1000F-12 PBA1000F-15 PBA1000F-24 PBA1000F-36 PBA1000F-48 VOLTAGE[V] AC85 - 264 1 or DC120 - 350 (AC50 or DC70 Please refer to the instruction manual 7. option 5) f * ACIN 100V 9typ 13typ CURRENT[A] ACIN 200V 5typ 7typ ( ) FREQUENCY[Hz] 50/60 47-63 ACIN 100V 74typ 79typ 80typ 82typ 82typ 84typ 84typ 84typ EFFICIENCY[%] INPUT ACIN 200V 76typ 81typ 83typ 84typ 84typ 86typ 86typ 86typ ACIN 100V 0.98typ (Io=100%) POWER FACTOR ( ) ACIN 200V 0.95typ Io=100% ACIN 100V 20/40typ (Io=100%)(Primary inrush current /Secondary inrush current)(More then 10 sec. to re-start) INRUSH CURRENT[A] ( )( )( ) ACIN 200V 40/40typ Io=100% Primary inrush current /Secondary inrush current More then 10 sec. to re-start LEAKAGE CURRENT[mA] 0.5/1.0max (ACIN 100V/240V 60Hz, Io=100%, According to IEC60950-1, DENAN) VOLTAGE[V] 3.3 5 7.5 12 15 24 36 48 ACIN 100V 200 200 134 88 70 44 29 22 CURRENT[A] 3 ( ) ACIN 200V* 200 200 134 88 70 44 51 29 22 LINE REGULATION[mV] 20max 20max 36max 48max 60max 96max 144max 192max LOAD REGULATION[mV] 40max 40max 60max 100max 120max 150max 150max 300max 0to+50 *1 80max 80max 120max 120max 120max 120max 150max 150max C RIPPLE[mVp-p] 1 -20-0 * 140max 140max 160max 160max 160max 160max 160max 400max C 0to+50 *1 120max 120max 150max 150max 150max 150max 200max 200max C OUTPUT RIPPLE NOISE[mVp-p] 1 -20-0 * 160max 160max 180max 180max 180max 180max 240max 500max C 0to+50 *1 40max 50max 75max 120max 150max 240max 360max 480max C TEMPERATURE REGULATION[mV] 1 -20 to +50 * 60max 75max 120max 180max 180max 290max 440max 600max C DRIFT[mV] *2 12max 20max 30max 48max 60max 96max 144max 192max ( , ) START-UP TIME[ms] 400typ ACIN 100/200V Io=100% Start-up time is 500ms typ for less than 1minute of applying input again from turning off the input voltage. * HOLD-UP TIME[ms] 20typ (ACIN 100/200V, Io=100%) OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 2.64 - 3.96 3.96 - 6.00 5.25 - 8.25 8.25 - 13.20 10.50 - 16.50 16.50 - 26.40 25.20 - 39.60 38.40 - 56.00 OUTPUT VOLTAGE SETTING[V] 3.30 - 3.40 5.00 - 5.15 7.50 - 7.80 12.00 - 12.48 15.00 - 15.60 24.00 - 24.96 36.00 - 37.44 48.00 - 49.92 OVERCURRENT PROTECTION Works over 105% of rated current or 101% of peak current and recovers automatically OVERVOLTAGE PROTECTION[V] *4 Vo+0.66 - 1.32 Vo+1.0 - 2.0 Vo+1.5 - 3.0 Vo+2.4 - 4.8 Vo+3.0 - 6.0 Vo+4.8 - 9.6 Vo+7.2 - 14.4 Vo+4.8 - 12.0 PROTECTION ( ) CIRCUIT AND OPERATING INDICATION LED Green OTHERS REMOTE SENSING Provided REMOTE ON/OFF Provided INPUT-OUTPUT RC AC3,000V 1minute, Cutoff current = 25mA, DC500V 50M min (At Room Temperature) - W , , , ( ) INPUT-FG AC2 000V 1minute Cutoff current = 25mA DC500V 50M min At Room Temperature W ISOLATION OUTPUT RC AUX-FG AC500V 1minute, Cutoff current = 100mA, DC500V 50M min (At Room Temperature) - - W , , ( ) OUTPUT-RC AUX AC500V 1minute Cutoff current = 100mA DC500V 50M min At Room Temperature - W OPERATING TEMP.,HUMID.AND ALTITUDE -20 to +71 (Required Derating), 20 - 90%RH (Non condensing) 3,000m (10,000feet) max C , , ( ) , ( , ) STORAGE TEMP. HUMID.AND ALTITUDE -20 to +75 20 - 90%RH Non condensing 9 000m 30 000feet max C ENVIRONMENT 2 VIBRATION 10 - 55Hz, 19.6m/s (2G), 3minutes period, 60minutes each along X, Y and Z axis 2 ( ), , , IMPACT 196.1m/s 20G 11ms once each X Y and Z axis AGENCY APPROVALS (At only AC input) UL60950-1, C-UL(CSA60950-1), EN60950-1, EN50178 Complies with DEN-AN SAFETY AND , , , , NOISE CONDUCTED NOISE Complies with FCC Part15 classB VCCI-B CISPR22-B EN55011-B EN55022-B REGULATIONS HARMONIC ATTENUATOR Complies with IEC61000-3-2 ( )( ) CASE SIZE/WEIGHT 150 61 240mm [5.91 2.4 9.45 inches] without terminal block and screw W H D /2.2kg max X X X X X X OTHERS ( ) COOLING METHOD Forced cooling internal fan *1 Measured by 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN *4 Overvoltage protection circuit to follow to output voltage setting. Standard overvoltage :RM101). protection circuit is please contact us for details. Ripple and ripple noise is measured on measuring board with capacitor of 22mF within *5 Derating is required.Consult us for details. 150mm from the output terminal. *6 Please contact us about safety approvals for the model with option. *2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C. * A sound may occur from power supply at pulse loading. *3 () means peak current. Peak loading for 10s. And Duty 35% max, refer to Instruction manual in detail. PBA/PBW-20 H V.ADJ CN1 AC AC (L) (N) FG CN2 CN3 PBA1000F PBA/PBW Block diagram FUSE INRUSH AC IN NOISE RECTIFIER CURRENT 85 - 264V FILTER LIMIT 250V30A FG RECTIFIER INVERTER DC OUT AND FILTER THERMAL ±M PROTECTION CURRENT OVER VOLTAGE SENSING PROTECTION ACTIVE FILTER RECTIFIER CONTROL SWITCHING CONTROL ±S(REMOTE SENSING) AND DEVICE FILTER RC(REMOTE ON / OFF) MASTER VOLTAGE CURRENT VB(VOLTAGE BALANCE) SLAVE SENSING SENSING CB(CURRENT BALANCE) CONTROL VOLTAGE INTERNAL CONTROL FAN ALARM PG(POWER GOOD) SENSING REGULATOR AUX(12 V 0.1A) External view 4-M4 Name plate M4 Mounting Hole Input terminal cover 25max 15.85 (Bottom sides) [0.98] [0.62] AC(L) AC(N) FG( ) Name plate CN3 Output voltage CN2 adjustable potentiometer CN1 LED Output terminal(-) Output terminal(+) ±0.5 51.25 29 165 [2.02] [1.14] [6.5] (35) 240 6max [1.38] [9.45] [0.24] 8-M4 2-M4 Mounting Hole (Both sides) 2-º9 [0.35] AIR FLOW ¶ Tolerance : ±1 [±0.04] 7 13 29 165±0.5 ¶ Weight : 2.2kg max [0.28] [0.51] [1.14] [6.5] ¶ PCB Material/thickness : FR-4 / 1.6mm [0.06] ¶ Chassis material : Aluminum ¶ Dimensions in mm, [ ]= inches ¶ Mounting torque : 1.2N • m(12.8kgf • cm)max ¶ Screw tightening torque : 1.6N • m(16.9kgf • cm)max ¶ The housing for the remote sensing unused is mounted on CN1 ¶ Please connect safety ground to FG terminal on the unit. PBA/PBW-21 (7.5) 10 13 9 [0.39] [0.51] [0.35] [0.3] 79 [3.11] (24) 104.75 [0.94] [4.12] (18) (25) 2.5 [0.1] [0.71] [0.98] 11.5 38±0.5 110±0.5 20 [0.45] [1.5] [4.33] [0.79] 61 150 [2.4] [5.91] Ordering information AC-DC Power Supplies Enclosed type PBA/PBW PB A 1500 F -5 -O PBA1500F 123456 1Series name R Recommended EMI/EMC Filter 2Single output NAC-20-472 3Output wattage 4Universal input 5Output voltage 6Optional *6 C :with Coating G :Low leakage current U :Operation stop voltage High voltage pulse noise type : NAP series is set at a lower value Low leakage current type : NAM series F1 :With Long-Life fan *The EMI/EMC Filter is recommended F3 :Reverse air exhaust *to connect with several devices. type F4 :Low speed fan Refer to instruction manual 7.1. MODEL PBA1500F-3R3 PBA1500F-5 PBA1500F-7R5 PBA1500F-12 PBA1500F-15 PBA1500F-24 PBA1500F-36 PBA1500F-48 MAX OUTPUT WATTAGE[W] 990 1500 1500 1500 1500 1680 1692 1680 ACIN 100V 3.3V 300A 5V 300A 7.5V 200A 12V 125A 15V 100A 24V 65A 36V 42A 48V 32A DC OUTPUT ACIN 200V 3 3.3V 300A 5V 300A 7.5V 200A 12V 125A 15V 100A 24V 70(105)A 36V 47(70)A 48V 35A * SPECIFICATIONS MODEL PBA1500F-3R3 PBA1500F-5 PBA1500F-7R5 PBA1500F-12 PBA1500F-15 PBA1500F-24 PBA1500F-36 PBA1500F-48 VOLTAGE[V] AC85 - 264 1 or DC120 - 370 (AC50 or DC70 Please refer to the instruction manual 7. option 5) f * ACIN 100V 15typ 19typ CURRENT[A] ACIN 200V 8typ 10typ ( ) FREQUENCY[Hz] 50/60 47-63 ACIN 100V 72typ 77typ 81typ 81typ 83typ 84typ 84typ 84typ EFFICIENCY[%] INPUT ACIN 200V 75typ 81typ 83typ 84typ 86typ 87typ 87typ 87typ ACIN 100V 0.98typ (Io=100%) POWER FACTOR ( ) ACIN 200V 0.95typ Io=100% ACIN 100V 20/40typ (Io=100%)(Primary inrush current /Secondary inrush current)(More than 10 sec. to re-start) INRUSH CURRENT[A] ( )( )( ) ACIN 200V 40/40typ Io=100% Primary inrush current /Secondary inrush current More than 10 sec. to re-start LEAKAGE CURRENT[mA] 0.9/1.5max (ACIN 100V/240V 60Hz, Io=100%, According to IEC60950-1, DENAN) VOLTAGE[V] 3.3 5 7.5 12 15 24 36 48 ACIN 100V 300 300 200 125 100 65 42 32 CURRENT[A] 3 ( ) ( ) ACIN 200V* 300 300 200 125 100 70 105 47 70 35 LINE REGULATION[mV] 20max 20max 36max 48max 60max 96max 144max 192max LOAD REGULATION[mV] 40max 40max 60max 100max 120max 150max 150max 300max 0to+50 *1 80max 80max 120max 120max 120max 120max 150max 150max C RIPPLE[mVp-p] 1 -20-0 * 140max 140max 160max 160max 160max 160max 160max 400max C 0to+50 *1 120max 120max 150max 150max 150max 150max 200max 200max C OUTPUT RIPPLE NOISE[mVp-p] 1 -20-0 * 160max 160max 180max 180max 180max 180max 240max 500max C 0to+50 *1 40max 50max 75max 120max 150max 240max 360max 480max C TEMPERATURE REGULATION[mV] 1 -20 to +50 * 60max 75max 120max 180max 180max 290max 440max 600max C DRIFT[mV] *2 12max 20max 30max 48max 60max 96max 144max 192max ( , ) START-UP TIME[ms] 600typ ACIN 100/200V Io=100% HOLD-UP TIME[ms] 20typ (ACIN 100/200V, Io=100%) OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 2.64 - 3.96 3.96 - 6.00 5.25 - 8.25 8.25 - 13.20 10.50 - 16.50 16.50 - 26.40 25.20 - 39.60 38.40 - 56.00 OUTPUT VOLTAGE SETTING[V] 3.30 - 3.40 5.00 - 5.15 7.50 - 7.80 12.00 - 12.48 15.00 - 15.60 24.00 - 24.96 36.00 - 37.44 48.00 - 49.92 OVERCURRENT PROTECTION Works over 105% of rated current or 101% of peak current and recovers automatically OVERVOLTAGE PROTECTION[V] *4 Vo+0.66 - 1.32 Vo+1.0 - 2.0 Vo+1.5 - 3.0 Vo+2.4 - 4.8 Vo+3.0 - 6.0 Vo+4.8 - 9.6 Vo+7.2 - 14.4 Vo+4.8 - 12.0 PROTECTION ( ) CIRCUIT AND OPERATING INDICATION LED Green OTHERS REMOTE SENSING Provided REMOTE ON/OFF Provided INPUT-OUTPUT RC AC3,000V 1minute, Cutoff current = 25mA, DC500V 50M min (At Room Temperature) - W , , , ( ) INPUT-FG AC2 000V 1minute Cutoff current = 25mA DC500V 50M min At Room Temperature W ISOLATION OUTPUT RC AUX-FG AC500V 1minute, Cutoff current = 100mA, DC500V 50M min (At Room Temperature) - - W , , ( ) OUTPUT-RC AUX AC500V 1minute Cutoff current = 100mA DC500V 50M min At Room Temperature - W OPERATING TEMP.,HUMID.AND ALTITUDE -20 to +71 (Required Derating), 20 - 90%RH (Non condensing) 3,000m (10,000feet) max C , , ( ) , ( , ) STORAGE TEMP. HUMID.AND ALTITUDE -20 to +75 20 - 90%RH Non condensing 9 000m 30 000feet max C ENVIRONMENT 2 VIBRATION 10 - 55Hz, 19.6m/s (2G), 3minutes period, 60minutes each along X, Y and Z axis 2 ( ), , , IMPACT 196.1m/s 20G 11ms once each X Y and Z axis AGENCY APPROVALS (At only AC input) UL60950-1, C-UL(CSA60950-1), EN60950-1, EN50178 Complies with DEN-AN SAFETY AND , , , , , NOISE CONDUCTED NOISE Complies with FCC Part15 classB VCCI-B CISPR22-B EN55011-B EN55022-B additional EMI/EMC Filter required for meeting class B REGULATIONS HARMONIC ATTENUATOR Complies with IEC61000-3-2 ( )( ) CASE SIZE/WEIGHT 178 61 268mm [7.01 2.4 10.55 inches] without terminal block and screw W H D /3.4kg max X X X X X X OTHERS ( ) COOLING METHOD Forced cooling internal fan *1 Measured by 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN *4 Overvoltage protection circuit to follow to output voltage setting. Standard overvoltage :RM101). protection circuit is please contact us for details. Ripple and ripple noise is measured on measuring board with capacitor of 22mF within *5 Derating is required.Consult us for details. 150mm from the output terminal. *6 Please contact us about safety approvals for the model with option. *2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C. * A sound may occur from power supply at pulse loading. *3 () means peak current. Peak loading for 10s. And Duty 35% max, refer to Instruction manual in detail. PBA/PBW-22 V.ADJ CN1 AC AC (L) (N) NC FG CN2 CN3 PBA1500F PBA/PBW Block diagram FUSE INRUSH AC IN NOISE RECTIFIER CURRENT 85 - 264V FILTER LIMIT 250V30A FG RECTIFIER INVERTER DC OUT AND FILTER ±M THERMAL PROTECTION CURRENT OVER VOLTAGE SENSING PROTECTION ACTIVE FILTER RECTIFIER CONTROL SWITCHING CONTROL ±S(REMOTE SENSING) AND DEVICE FILTER RC(REMOTE ON / OFF) MASTER VOLTAGE CURRENT VB(VOLTAGE BALANCE) SLAVE SENSING SENSING CB(CURRENT BALANCE) CONTROL VOLTAGE INTERNAL CONTROL FAN ALARM PG(POWER GOOD) SENSING REGULATOR AUX(12 V 0.1A) External view 8-M4 Name plate Input terminal cover 15.85 M4 25max Mounting Hole [0.62] [0.98] (Both sides) AC(L) AC(N) NC FG( ) CN1 CN2 Name plate CN3 Output voltage adjustable potentiometer LED Output terminal(-) Output terminal(+) 51.25 ±0.5 19 171.5 [2.02] [0.75] [6.75] (45) 268 6max [1.77] [10.55] [0.24] 8-M4 4-M4 Mounting Hole (Both sides) 2-º9 [0.35] AIR FLOW ¶ Tolerance : ±1 [±0.04] 10 15 19 171.5 ±0.5 ¶ Weight : 3.4kg max [0.39] [0.59] [0.75] [6.75] ¶ PCB Material/thickness : FR-4 / 1.6mm [0.06] ¶ Chassis material : Aluminum ¶ Dimensions in mm, [ ]= inches ¶ Mounting torque : 1.2N • m(12.8kgf • cm)max ¶ Screw tightening torque : 1.6N • m(16.9kgf • cm)max ¶ The housing for the remote sensing unused is mounted on CN1 ¶ Please connect safety ground to FG terminal on the unit. PBA/PBW-23 (7.5) 10 13 9 [0.39] [0.51][0.35] [0.3] 107 [4.21] (24) 132 (18) (25) [0.94] [5.2] [0.71] [0.98] 4 [0.16] ±0.5 11.5 38 152.4 ±0.5 12.8 [0.45] [1.5] [6] [0.5] 61 178 [7.01] [2.4] Ordering information AC-DC Power Supplies Enclosed type PBA/PBW PB A 1500 T -5 -O PBA1500T 123456 1Series name R Recommended EMI/EMC Filter 2Single output TAC-10-683 3Output wattage 4Triple input phase 5Output voltage 6Optional *6 C :with Coating G :Low leakage current U :Operation stop voltage is set at a lower value F1 :With Long-Life fan F3 :Reverse air exhaust type F4 :Low speed fan Refer to instruction manual 7.1. MODEL PBA1500T-5 PBA1500T-12 PBA1500T-24 PBA1500T-48 MAX OUTPUT WATTAGE[W] 1500 1500 1680 1680 3 ( ) DC OUTPUT ACIN 200V* 5V 300A 12V 125A 24V 70 105 A 48V 35A SPECIFICATIONS MODEL PBA1500T-5 PBA1500T-12 PBA1500T-24 PBA1500T-48 AC170 - 264 3 (AC100 Please refer to the instruction manual 7. option 5) VOLTAGE[V] f * CURRENT[A] ACIN 200V 6typ ( ) FREQUENCY[Hz] 50/60 47-63 INPUT 81typ 84typ EFFICIENCY[%] ACIN 200V 87typ 87typ ACIN 200V 0.95typ (Io=100%) POWER FACTOR INRUSH CURRENT[A] ACIN 200V 40/40typ (Io=100%)(Primary inrush current /Secondary inrush current)(More than 10 sec. to re-start) ( , , , ) LEAKAGE CURRENT[mA] 1.5max ACIN 240V 60Hz Io=100% According to IEC60950-1 DENAN VOLTAGE[V] 5 122448 3 ACIN 200V* CURRENT[A] 300 125 70(105)35 LINE REGULATION[mV] 20max 48max 96max 192max LOAD REGULATION[mV] 40max 100max 150max 300max 1 0to+50C* 80max 120max 120max 150max RIPPLE[mVp-p] -20-0 *1 140max 160max 160max 400max C 0to+50 *1 120max 150max 150max 200max C RIPPLE NOISE[mVp-p] 1 OUTPUT -20-0 * 160max 180max 180max 500max C 0to+50 *1 C 50max 120max 240max 480max TEMPERATURE REGULATION[mV] -20 to +50 *1 75max 180max 290max 600max C DRIFT[mV] *2 20max 48max 96max 192max ( , ) START-UP TIME[ms] 300typ ACIN 200V Io=100% Start-up time is 500ms typ for less than 1 minute of applying input again from turning off the input voltage. * ( , ) HOLD-UP TIME[ms] 20typ ACIN 200V Io=100% 3.96 - 6.00 8.25 - 13.20 16.50 - 26.40 38.40 - 56.00 OUTPUT VOLTAGE ADJUSTMENT RANGE[V] OUTPUT VOLTAGE SETTING[V] 5.00 - 5.15 12.00 - 12.48 24.00 - 24.96 48.00 - 49.92 OVERCURRENT PROTECTION Works over 105% of rated current or 101% of peak current and recovers automatically 4 Vo+2.4 - 4.8 Vo+4.8 - 9.6 Vo+2.0 - 12.0 OVERVOLTAGE PROTECTION[V] * Vo+1.0 - 2.0 PROTECTION CIRCUIT AND LED (Green) OPERATING INDICATION OTHERS REMOTE SENSING Provided REMOTE ON/OFF Provided , , , ( ) INPUT-OUTPUT RC AC3 000V 1minute Cutoff current = 25mA DC500V 50M min At Room Temperature - W AC2,000V 1minute, Cutoff current = 25mA, DC500V 50M min (At Room Temperature) INPUT-FG W ISOLATION OUTPUT RC AUX-FG AC500V 1minute, Cutoff current = 100mA, DC500V 50M min (At Room Temperature) - - W , , ( ) OUTPUT-RC AUX AC500V 1minute Cutoff current = 100mA DC500V 50M min At Room Temperature - W , ( ), ( ) , ( , ) OPERATING TEMP. HUMID.AND ALTITUDE -20 to +71C Required Derating 20 - 90%RH Non condensing 3 000m 10 000feet max , -20 to +75 , 20 - 90%RH (Non condensing) 9,000m (30,000feet) max STORAGE TEMP. HUMID.AND ALTITUDE C ENVIRONMENT 2 VIBRATION 10 - 55Hz, 19.6m/s (2G), 3minutes period, 60minutes each along X, Y and Z axis 2 ( ), , , IMPACT 196.1m/s 20G 11ms once each X Y and Z axis SAFETY AND ( ) , ( ), , AGENCY APPROVALS At only AC input UL60950-1 C-UL CSA60950-1 EN60950-1 EN50178 Complies with DEN-AN NOISE CONDUCTED NOISE Complies with FCC Part15 classB, VCCI-B, CISPR22-B, EN55011-B, EN55022-B, additional EMI/EMC Filter required for meeting class B REGULATIONS CASE SIZE/WEIGHT 178 61 268mm [7.01 2.4 10.55 inches] (without terminal block and screw)(W H D) /3.4kg max X X X X X X OTHERS ( ) COOLING METHOD Forced cooling internal fan *1 Measured by 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN *4 Overvoltage protection circuit to follow to output voltage setting. Standard overvoltage :RM101). protection circuit is please contact us for details. Ripple and ripple noise is measured on measuring board with capacitor of 22mF within *5 Derating is required.Consult us for details. 150mm from the output terminal. *6 Please contact us about safety approvals for the model with option. *2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C. * A sound may occur from power supply at pulse loading. *3 () means peak current. Peak loading for 10s. And Duty 35% max, refer to Instruction manual in detail. PBA/PBW-24 V.ADJ CN1 AC (L1) (L2) (L3) FG CN2 CN3 PBA1500T PBA/PBW Block diagram FUSE AC250V16A INRUSH AC IN NOISE RECTIFIER CURRENT 170 - 264V FILTER LIMIT (3º) FG RECTIFIER INVERTER DC OUT AND FILTER THERMAL ±M(MONITOR) PROTECTION CURRENT OVER VOLTAGE SENSING PROTECTION ACTIVE FILTER RECTIFIER CONTROL SWITCHING CONTROL ±S(REMOTE SENSING) AND DEVICE FILTER RC(REMOTE ON / OFF) MASTER VOLTAGE CURRENT VB(VOLTAGE BALANCE) SLAVE SENSING SENSING CB(CURRENT BALANCE) CONTROL VOLTAGE INTERNAL CONTROL FAN ALARM PG(POWER GOOD) SENSING REGULATOR AUX(12 V 0.1A) OPEN PHASE External view 8-M4 Name plate Input terminal cover 15.85 M4 25max Mounting Hole [0.62] [0.98] (Both sides) AC(L1) AC(L2) AC(L3) FG( ) CN1 CN2 Name plate CN3 Output voltage adjustable potentiometer LED Output terminal(-) Output terminal(+) 51.25 ±0.5 19 171.5 [2.02] [0.75] [6.75] (45) 268 6max [1.77] [10.55] [0.24] 8-M4 4-M4 Mounting Hole (Both sides) 2-º9 [0.35] AIR FLOW ¶ Tolerance : ±1 [±0.04] 10 15 19 171.5 ±0.5 ¶ Weight : 3.4kg max [0.39] [0.59] [0.75] [6.75] ¶ PCB Material/thickness : FR-4 / 1.6mm [0.06] ¶ Chassis material : Aluminum ¶ Dimensions in mm, [ ]= inches ¶ Mounting torque : 1.2N • m(12.8kgf • cm)max ¶ Screw tightening torque : 1.6N • m(16.9kgf • cm)max ¶ The housing for the remote sensing unused is mounted on CN1 ¶ Please connect safety ground to unit in M4 holes. PBA/PBW-25 (7.5) 10 13 9 [0.39] [0.51][0.35] [0.3] 107 [4.21] (24) 132 (18) (25) [0.94] [5.2] [0.71] [0.98] 4 [0.16] ±0.5 11.5 38 152.4 ±0.5 12.8 [0.45] [1.5] [6] [0.5] 61 178 [7.01] [2.4]
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the PBA300F-24 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Cosel CBS1002403 DC/DC Converter. 18-36DC Input Voltage | 100 W
Cosel CBS1002415 15V/6.7A DC/DC Converter
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods