PAA100F-3 - COSEL - Elite.Parts

Description

Part Number

PAA100F-3

Price

Request Quote

Manufacturer

COSEL

Lead Time

Request Quote

Category

INTEGRATED CIRCUIT

Specifications

Agency Approvals

UL60950-1, EN60950-1, EN50178, CSA C22.2 No.60950-1 Complies with DEN-AN and IEC60950-1

Altitude

Operating:3,000m (10,000feet) max; Storage:9,000m (30,000feet) max

Case Size/Weight

50X93X189mm (without terminal block) (WXHXD) /700g max (without cover)

Conducted Noise

Complies with FCC-B, CISPR22-B, EN55022-B, VCCI-B

Cooling method

Convection

DC Output

VOLTAGE[V]:3 V; CURRENT[A]:20 A

Drift[mV]

20max

Frequency[Hz]

50/60 (47 - 63)

Harmonic Attenuator

Complies with EC61000-3-2

Hold-Up Time[ms]

20typ (Io equals 100%)

Humidity

Operating:20 - 90%RH (Non condensing); Storage:20 - 90%RH (Non condensing)

Impact

196.1m/s2 (20G), 11ms, once each X, Y and Z axis

INPUT CURRENT[A]

ACIN 100V:1.4typ; ACIN 200V:0.7typ

Input EFFICIENCY[%]

74typ

Input Voltage[V]

AC85 - 264 or DC120 - 340

Inrush Current[A]

ACIN 100V:20typ (Io equals 100%) (At cold start); ACIN 200V:40typ (Io equals 100%) (At cold start)

Isolation

INPUT-OUTPUT-RC:AC3,000V 1minute, Cutoff current equals 10mA, DC500V 50MW min (At Room Temperature); INPUT-FG:AC2,000V 1minute, Cutoff current equals 10mA, DC500V 50MW min (At Room Temperature); OUTPUT-RC-FG:AC500V 1minute, Cutoff current equals 100mA, DC500V 50MW min (At Room Temperature); OUTPUT-RC:AC100V 1minute, Cutoff current equals 100mA, DC100V 10MW min (At Room Temperature)

Leakage Current[mA]

0.75max (60Hz, According to UL, CSA, VDE and DEN-AN)

Line Regulation[mV]

20max

Load Regulation[mV]

40max

Max Output Wattage[W]

Operating Indication

LED (Green)

Output Current[A]

Output Voltage Adjustment Range[V]

2.85 - 3.6, ±10%

Output Voltage[V]

Overcurrent protection

Works over 105% of rating and recovers automatically

Overvoltage Protection

4.00 - 5.25V, Works at 115 - 140% of rating

Power Factor

ACIN 100V:0.99typ (Io equals 100%); ACIN 200V:0.95typ (Io equals 100%)

Remote On/Off

Optional (Refer to Instruction Manual)

Remote Sensing

Provided

Ripple Noise[mVp-p]

0 to +50°C:120max;-10 to +50°C:160max

Ripple[mVp-p]

0 to +50°C:80max;-10 to +50°C:140max

Start-Up Time[ms]

500max (ACIN 85V, Io equals 100%)

Temperature

Operating:-10 to +65°C; Storage:-20 to +75°C

Temperature Regulation[mV]

0 to +50°C:50max;-10 to +50°C:60max

Vibration

10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis

Features

Harmonic attenuator, PFC (Complies with IEC61000-3-2)
Parallel operation
Remote ON/OFF Control
RoHS Compliant
Universal input (AC85-264V)

Datasheet

COSEL-PAA100F-5-PowerSupply-datasheet1-1940230582.pdf

113 KiB

Download

Extracted Text

Home > Product Details PAA100F Features Harmonic attenuator, PFC (Complies with IEC61000-3-2) Universal input (AC85-264V) Remote ON/OFF Control Parallel operation RoHS Compliant Safety Agency Approvals Complies with DEN-AN UL1950, CSA C22.2 No.234, EN60950, VDE0160 EMI Compliance FCC-B CISPR22-B EN55022-B VCCI-B 3 year warranty(refer to Instruction Manual) Input Output DC Voltage Wattage Output Model [V] [W] [V/A] DC 120 - 3V PAA100F-3 340 60 20A AC 85 - 264 DC 120 - 5V PAA100F-5 340 100 20A AC 85 - 264 DC 120 - 12V PAA100F-12 340 102 8.5A AC 85 - 264 DC 120 - 15V PAA100F-15 340 105 7A AC 85 - 264 DC 120 - 24V PAA100F-24 340 108 4.5A AC 85 - 264 DC 120 - 48V PAA100F-48 340 100.8 2.1A AC 85 - 264 Ordering information Unit type PAA PAA 100 F -5 -O PAA100F 12345 1Series name Recommended Noise Filter R 2Output wattage NAC-06-472 3Universal input 4Output voltage 5Optional C :with Coating G :Low leakage current N :with Cover R :with Remote ON/OFF High voltage pulse noise type : NAP series Low leakage current type : NAM series *The Noise Filter is recommended *to connect with several devices. MODEL PAA100F-3 PAA100F-5 PAA100F-12 PAA100F-15 PAA100F-24 PAA100F-48 MAX OUTPUT WATTAGE[W] 60 100 102 105 108 100.8 DC OUTPUT 3V 20A 5V 20A 12V 8.5A 15V 7A 24V 4.5A 48V 2.1A SPECIFICATIONS MODEL PAA100F-3 PAA100F-5 PAA100F-12 PAA100F-15 PAA100F-24 PAA100F-48 VOLTAGE[V] AC85 - 264 1 or DC120 - 340 f ACIN 100V 0.9typ 1.4typ CURRENT[A] ACIN 200V 0.45typ 0.7typ FREQUENCY[Hz] 50/60 (47-63) EFFICIENCY[%] 65typ 74typ 76typ 77typ 79typ 79typ INPUT ( ) ACIN 100V 0.99typ Io=100% POWER FACTOR ( ) ACIN 200V 0.95typ Io=100% ( )( ) ACIN 100V 20typ Io=100% At cold start INRUSH CURRENT[A] ( )( ) ACIN 200V 40typ Io=100% At cold start ( , , , ) LEAKAGE CURRENT[mA] 0.75max 60Hz According to UL CSA VDE and DEN-AN VOLTAGE[V] 3 5 12152448 CURRENT[A] 20 20 8.5 7 4.5 2.1 LINE REGULATION[mV] 20max 20max 48max 60max 96max 192max LOAD REGULATION[mV] 40max 40max 100max 120max 150max 240max 0to+50 *1 80max 80max 120max 120max 120max 150max C RIPPLE[mVp-p] 1 -10 - 0 * 140max 140max 160max 160max 160max 200max C 1 0to+50 * 120max 120max 150max 150max 150max 400max C OUTPUT RIPPLE NOISE[mVp-p] 1 -10 - 0 * 160max 160max 180max 180max 180max 600max C 0to+50 50max 50max 120max 150max 240max 480max C TEMPERATURE REGULATION[mV] -10to+50 60max 60max 150max 180max 290max 600max C 2 DRIFT[mV] * 20max 20max 48max 60max 96max 192max ( , ) START-UP TIME[ms] 500max ACIN 85V Io=100% ( ) HOLD-UP TIME[ms] 20typ Io=100% OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 2.85 - 3.6 t10% OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically OVERVOLTAGE PROTECTION 4.00 - 5.25V Works at 115 - 140% of rating PROTECTION CIRCUIT AND OPERATING INDICATION LED (Green) OTHERS REMOTE SENSING Provided REMOTE ON/OFF Optional (Refer to Instruction Manual) 3 INPUT-OUTPUT RC * AC3,000V 1minute, Cutoff current = 10mA, DC500V 50M min (At Room Temperature) - W , , , ( ) INPUT-FG AC2 000V 1minute Cutoff current = 10mA DC500V 50M min At Room Temperature W ISOLATION 3 , , ( ) OUTPUT RC-FG * AC500V 1minute Cutoff current = 100mA DC500V 50M min At Room Temperature - W 3 , , ( ) OUTPUT-RC * AC100V 1minute Cutoff current = 100mA DC100V 10M min At Room Temperature W , , ( )( ), , ( , ) OPERATING TEMP. HUMID.AND ALTITUDE -10 to +65 20 - 90%RH Non condensing Refer to DERATING CURVE 3 000m 10 000feet max C , , ( ), , ( , ) STORAGE TEMP. HUMID.AND ALTITUDE -20 to +75 20 - 90%RH Non condensing 9 000m 30 000feet max C ENVIRONMENT 2 , ( ), , , VIBRATION 10 - 55Hz 19.6m/s 2G 3minutes period 60minutes each along X Y and Z axis 2 ( ), , , IMPACT 196.1m/s 20G 11ms once each X Y and Z axis , , , AGENCY APPROVALS UL60950-1 EN60950-1 EN50178 CSA C22.2 No.234 Complies with DEN-AN and IEC60950-1 SAFETY AND , , , NOISE CONDUCTED NOISE Complies with FCC-B CISPR22-B EN55022-B VCCI-B REGULATIONS HARMONIC ATTENUATOR Complies with IEC61000-3-2 CASE SIZE/WEIGHT 50 93 189mm (without terminal block)(W H D) /700g max (without cover) X X X X OTHERS COOLING METHOD Convection *1 According to 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN : RM101). *2 Drift is change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. *3 Applicable when Remote ON/OFF(optional) is added. * Derating is required when operated with cover. A-52 PAA100F PAA External view Voltage adjust LED Short piece 20max CN1 (option) ( ) 13.5 Cover name plate 189 12 Cover (option) +S 2-M4 +V Mounting hole -V -S FG AC (L) AC (N) M4 Terminal cover +0.5 125 (16) - 20 (28) º4.5 3-M4 +0.5 100 74 - Mounting hole ¶CN1(Connector for Remote ON/OFF) - - Model: B2B XH A Pin No. Contents 1 +RC - 2 RC Mating Connector(Terminal) Mfr: J.S.T. XHP-2(BXH-001T-P0.6 or SXH-001T-P0.6) ¶Weight: 700g or less(without cover) ¶Cover is optional Name plate 5.5 + ¶Tolerance 1 - . . ¶Mounting torque:1.2N m(12.8kgf cm)max Performance data ( ) ¡RISE TIME & FALL TIME PAA100F-5 ¡EFFICIENCY (PAA100F-5) 80 78 76 74 DC Output 72 AC Input ACIN 100V Io=100% 70 Load factor100% Load factor 50% 68 60 100 140 180 220 260 300 50ms/DIV INPUT VOLTAGE V HARMOINC CURRENT (PAA100F-5) HARMONIC CURRENT (PAA100F-5) ¡ ¡ 10 10 Harmonic current standard class A Harmonic current standard class A (at odd number) (at odd number) 1 1 Load factor 100% Load factor 100% Input voltage AC 100V Input voltage AC 230V 0.1 0.1 0.01 0.01 0.001 0.001 010 20 30 40 010 20 30 40 HARMONIC ORDER HARMONIC ORDER A-53 HARMONIC CURRENT A 37.5 (81) (11.5) 8.2 10 22.5 EFFICIENCY A HARMONIC CURRENT 4.5 45 10 +0.5 93 25 - 50

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products