Ordering information Unit type P15E -5 -O P15E P 12345 1Series name R 2Output wattage 3UL recognized,TuV approved, CSA certified:E 4Output voltage 5Optional *3 C :with Coating G :Low leakage current J :Connector type N :with Cover MODEL P15E-5 P15E-9 P15E-12 P15E-15 P15E-18 P15E-24 P15E-30 P15E-48 MAX OUTPUT WATTAGE[W] 15 15.3 15.6 15 16.2 16.8 15 16.8 DC OUTPUT 5V 3A 9V 1.7A 12V 1.3A 15V 1A 18V 0.9A 24V 0.7A 30V 0.5A 48V 0.35A SPECIFICATIONS MODEL P15E-5 P15E-9 P15E-12 P15E-15 P15E-18 P15E-24 P15E-30 P15E-48 VOLTAGE[V] AC85 - 264 1 or DC110 - 370 f *1 ( ) ACIN 100V 0.3typ Io=100% CURRENT[A] *1 ( ) ACIN 200V 0.18typ Io=100% INPUT FREQUENCY[Hz] 47 - 440 or DC EFFICIENCY[%] 73typ 75typ 79typ 81typ 81typ 81typ 81typ 81typ ( )( ) ACIN 100V 20typ Io=100% At cold start INRUSH CURRENT[A] ACIN 200V 40typ (Io=100%)(At cold start) VOLTAGE[V] 5 9 121518243048 CURRENT[A] 3.0 1.7 1.3 1.0 0.9 0.7 0.5 0.35 MAX OUTPUT WATTAGE[W] 15.0 15.3 15.6 15.0 16.2 16.8 15.0 16.8 LINE REGULATION[mV] 20max 36max 48max 60max 72max 96max 120max 192max LOAD REGULATION[mV] 40max 70max 100max 120max 140max 150max 180max 380max 2 OUTPUT RIPPLE[mVp-p] * 80max 120max 120max 120max 120max 120max 120max 150max *2 RIPPLE NOISE[mVp-p] 120max 150max 150max 150max 150max 150max 150max 250max TEMPERATURE REGULATION[mV] 0to+50 50max 90max 120max 150max 180max 240max 300max 480max C OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 10% t ( , ) START-UP TIME[ms] 100max ACIN 85V Io=100% ( , ) ( , ) HOLD-UP TIME[ms] 10typ ACIN 85V Io=100% 20typ ACIN 100V Io=100% OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically PROTECTION CIRCUIT OVERVOLTAGE PROTECTION Works at 115 - 140% of rating , , , ( ) INPUT-OUTPUT AC3 000V 1minute Cutoff current = 10mA DC500V 50M min At Room Temperature W ISOLATION INPUT-FG AC2,000V 1minute, Cutoff current = 10mA, DC500V 50M min (At Room Temperature) W , , ( ) OUTPUT-FG AC500V 1minute Cutoff current = 100mA DC500V 50M min At Room Temperature W , , ( )( ), , ( , ) OPERATING TEMP. HUMID.AND ALTITUDE -10 to +65 30 - 90%RH Non condensing Refer to DERATING CURVE 3 000m 10 000feet max C STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75 , 20 - 90%RH (Non condensing), 9,000m (30,000feet) max C ENVIRONMENT 2 , ( ), , , VIBRATION 10 - 55Hz 19.6m/s 2G 3minutes period 30minutes each along X Y and Z axis 2 ( ), , , IMPACT 196.1m/s 20G 11ms once each X Y and Z axis SAFETY AND AGENCY APPROVALS UL60950-1, EN60950-1, EN50178, CSA C22.2 No.60950-1 Complies with DEN-AN and IEC60950-1 NOISE REGULATIONS CONDUCTED NOISE Complies with FCC-B *1 The input current of the agency approved unit is indicated as 0.4A. *2 According to 15MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN : RM101). *3 Please contact us about safety approvals for the model with option. * Derating is required when operated with case cover. * Parallel operation with other model is not possible. A-72 P15E P External view Name Plate Optional Cover 99.5 max 17 LED 11 + 0.5 23.5 55 - Voltage Adjust Name Plate for Cover CN2 Safety 2-M3 Cover + Mounting + Hole - - CN1 FG FG AC (N) AC(N) NC AC(L) AC (L) 13.5 º3.5 89 6 M3 21 117 99.5 3.5 ¶Weight : 300g or less (without I/O Connector Mating Connector Terminal cover) CN1 10-31-1048 10-63-3044 Chain: 08-70-1031 ¶Cover is optional Loose: 08-70-1030 ¶Tolerance : t1 CN2 09-65-2049 09-50-1043 Chain: 08-70-1031 Loose: 08-70-1030 ¶Dimensions in mm. (Mfr : Molex) Protection Safety Groundº4 Name Plate 2-M3 +0.5 74 - 2-º3.5 5 7 Mounting 82 Hole . . Connector type Barrier strip type ¶Mounting torque:0.6N m(6.3kgf cm)max Performance data ( ) ( ) STATIC CHARACTERISTICS P15E-5 RISE TIME & FALL TIME P15E-5 ¡ ¡ (P15E-5) ¡OVERCURRENT CHARACTERISTICS ¡DERATING CURVE A-73 18 9.5 7.5 77.5 71 3.5 17.5 3.5 45.5 5.5 3.5 25 55.5 35 97 39 Ordering information Unit type P30E -5 -O P30E P 12345 1Series name R 2Output wattage 3UL recognized,TuV approved, CSA certified:E 4Output voltage 5Optional *3 C :with Coating G :Low leakage current J :Connector type N :with Cover MODEL P30E-5 P30E-9 P30E-12 P30E-15 P30E-18 P30E-24 P30E-30 P30E-48 MAX OUTPUT WATTAGE[W] 30 30.6 30 30 30.6 31.2 30 30.24 DC OUTPUT 5V 6A 9V 3.4A 12V 2.5A 15V 2A 18V 1.7A 24V 1.3A 30V 1.0A 48V 0.63A SPECIFICATIONS MODEL P30E-5 P30E-9 P30E-12 P30E-15 P30E-18 P30E-24 P30E-30 P30E-48 VOLTAGE[V] AC85 - 264 1 or DC110 - 370 f *1 ( ) ACIN 100V 0.6typ Io=100% CURRENT[A] *1 ( ) ACIN 200V 0.35typ Io=100% INPUT FREQUENCY[Hz] 47 - 440 or DC EFFICIENCY[%] 74typ 74typ 78typ 79typ 79typ 82typ 82typ 82typ ( )( ) ACIN 100V 20typ Io=100% At cold start INRUSH CURRENT[A] ACIN 200V 40typ (Io=100%)(At cold start) VOLTAGE[V] 5 9 121518243048 CURRENT[A] 6.0 3.4 2.5 2.0 1.7 1.3 1.0 0.63 MAX OUTPUT WATTAGE[W] 30 30.6 30 30 30.6 31.2 30 30.24 LINE REGULATION[mV] 20max 36max 48max 60max 72max 96max 120max 192max LOAD REGULATION[mV] 40max 70max 100max 120max 140max 150max 180max 300max 2 OUTPUT RIPPLE[mVp-p] * 80max 120max 120max 120max 120max 120max 120max 150max *2 RIPPLE NOISE[mVp-p] 120max 150max 150max 150max 150max 150max 150max 250max TEMPERATURE REGULATION[mV] 0to+50 50max 90max 120max 150max 180max 240max 300max 480max C OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 10% t ( , ) START-UP TIME[ms] 100max ACIN 85V Io=100% ( , ) ( , ) HOLD-UP TIME[ms] 10typ ACIN 85V Io=100% 20typ ACIN 100V Io=100% OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically PROTECTION CIRCUIT OVERVOLTAGE PROTECTION Works at 115 - 140% of rating , , , ( ) INPUT-OUTPUT AC3 000V 1minute Cutoff current = 10mA DC500V 50M min At Room Temperature W ISOLATION INPUT-FG AC2,000V 1minute, Cutoff current = 10mA, DC500V 50M min (At Room Temperature) W , , ( ) OUTPUT-FG AC500V 1minute Cutoff current = 100mA DC500V 50M min At Room Temperature W , , ( )( ), , ( , ) OPERATING TEMP. HUMID.AND ALTITUDE -10 to +65 30 - 90%RH Non condensing Refer to DERATING CURVE 3 000m 10 000feet max C STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75 , 20 - 90%RH (Non condensing), 9,000m (30,000feet) max C ENVIRONMENT 2 , ( ), , , VIBRATION 10 - 55Hz 19.6m/s 2G 3minutes period 30minutes each along X Y and Z axis 2 ( ), , , IMPACT 196.1m/s 20G 11ms once each X Y and Z axis SAFETY AND AGENCY APPROVALS UL60950-1, EN60950-1, EN50178, CSA C22.2 No.60950-1 Complies with DEN-AN and IEC60950-1 NOISE REGULATIONS CONDUCTED NOISE Complies with FCC-B *1 The input current of the agency approved unit is indicated as 0.7A. *2 According to 15MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN : RM101). *3 Please contact us about safety approvals for the model with option. * Derating is required when operated with case cover. * Parallel operation with other model is not possible. A-74 P30E P External view Name Plate LED Voltage Adjust 124.5 max 17 Optional Cover 11 + 0.5 55 34 - Name Plate for Cover Safety CN2 Cover + 2-M3 + - Mounting Hole - CN1 FG FG AC (N) AC(N) NC AC(L) AC (L) 13.5 º 3.5 114 6 M3 21 142 124.5 3.5 ¶Weight : 400g or less(without I/O Connector Mating Connector Terminal cover) CN1 10-31-1048 10-63-3044 Chain: 08-70-1031 ¶Cover is optional Loose: 08-70-1030 ¶Tolerance : t1 CN2 09-65-2049 09-50-1043 Chain: 08-70-1031 Loose: 08-70-1030 ¶Dimensions in mm. (Mfr : Molex) Protection Safety Groundº4 Name Plate 15 2-M3 + 0.5 83 - 2-º3.5 5 7 Mounting 105 Hole . . Connector type Barrier strip type ¶Mounting torque:0.6N m(6.3kgf cm)max Performance data ( ) ( ) STATIC CHARACTERISTICS P30E-5 RISE TIME & FALL TIME P30E-5 ¡ ¡ (P30E-5) ¡OVERCURRENT CHARACTERISTICS ¡DERATING CURVE A-75 9.5 18 7.5 77.5 71 3.5 17.5 3.5 42.5 5.5 3.5 25 55.5 35 97 39 Ordering information Unit type P50E -5 -O P50E P 12345 1Series name R 2Output wattage 3UL recognized,TuV approved, CSA certified:E 4Output voltage 5Optional *3 C :with Coating G :Low leakage current J :Connector type N :with Cover MODEL P50E-5 P50E-9 P50E-12 P50E-15 P50E-18 P50E-24 P50E-30 P50E-48 MAX OUTPUT WATTAGE[W] 50 49.5 50.4 51 50.4 50.4 51 48 DC OUTPUT 5V 10A 9V 5.5A 12V 4.2A 15V 3.4A 18V 2.8A 24V 2.1A 30V 1.7A 48V 1.0A SPECIFICATIONS MODEL P50E-5 P50E-9 P50E-12 P50E-15 P50E-18 P50E-24 P50E-30 P50E-48 VOLTAGE[V] AC85 - 132 / 170 - 264 1 (User-selectable) or DC220 - 370 f *1 ( ) ACIN 100V 1.2typ Io=100% CURRENT[A] *1 ( ) ACIN 200V 0.61typ Io=100% INPUT FREQUENCY[Hz] 47 - 440 EFFICIENCY[%] 72typ 77typ 77typ 78typ 78typ 80typ 82typ 80typ ( )( ) ACIN 100V 20typ Io=100% At cold start INRUSH CURRENT[A] ACIN 200V 40typ (Io=100%)(At cold start) VOLTAGE[V] 5 9 121518243048 CURRENT[A] 10 5.5 4.2 3.4 2.8 2.1 1.7 1.0 MAX OUTPUT WATTAGE[W] 50 49.5 50.4 51 50.4 50.4 51 48 LINE REGULATION[mV] 20max 36max 48max 60max 72max 96max 120max 192max LOAD REGULATION[mV] 40max 70max 100max 120max 144max 150max 180max 240max 2 OUTPUT RIPPLE[mVp-p] * 80max 120max 120max 120max 120max 120max 120max 150max *2 RIPPLE NOISE[mVp-p] 120max 150max 150max 150max 150max 150max 150max 250max TEMPERATURE REGULATION[mV] 0to+50 50max 120max 120max 150max 180max 240max 350max 480max C OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 10% t ( , ) START-UP TIME[ms] 100max ACIN 85V Io=100% ( , ) ( , ) HOLD-UP TIME[ms] 10typ ACIN 85V Io=100% 20typ ACIN 100V Io=100% OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically PROTECTION CIRCUIT OVERVOLTAGE PROTECTION Works at 115 - 140% of rating , , , ( ) INPUT-OUTPUT AC3 000V 1minute Cutoff current = 10mA DC500V 50M min At Room Temperature W ISOLATION INPUT-FG AC2,000V 1minute, Cutoff current = 10mA, DC500V 50M min (At Room Temperature) W , , ( ) OUTPUT-FG AC500V 1minute Cutoff current = 100mA DC500V 50M min At Room Temperature W , , ( )( ), , ( , ) OPERATING TEMP. HUMID.AND ALTITUDE -10 to +65 30 - 90%RH Non condensing Refer to DERATING CURVE 3 000m 10 000feet max C STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75 , 20 - 90%RH (Non condensing), 9,000m (30,000feet) max C ENVIRONMENT 2 , ( ), , , VIBRATION 10 - 55Hz 19.6m/s 2G 3minutes period 30minutes each along X Y and Z axis 2 ( ), , , IMPACT 196.1m/s 20G 11ms once each X Y and Z axis SAFETY AND AGENCY APPROVALS UL60950-1, EN60950-1, EN50178, CSA C22.2 No.60950-1 Complies with DEN-AN and IEC60950-1 NOISE REGULATIONS CONDUCTED NOISE Complies with FCC-B *1 The input current of the agency approved unit is indicated as 1.1A (ACIN 100V) or 0.6A (ACIN 200V). *2 According to 15MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN : RM101). *3 Please contact us about safety approvals for the model with option. * Derating is required when operated with case cover. * Parallel operation with other model is not possible. A-76 P50E P External view I/O Connector Mating Connector Terminal CN1 10-31-1048 10-63-3044 Chain: 08-70-1031 Loose: 08-70-1030 CN2 09-65-2049 09-50-1043 Chain: 08-70-1031 Loose: 08-70-1030 CN3 10-31-1028 10-63-3024 Chain: 08-70-1031 Loose: 08-70-1030 ¶Maximum 5A per pin of CN2 can be (Mfr : Molex) applied. . . Connector type Barrier strip type ¶Mounting torque:0.49N m(5.0kgf cm)max Performance data ( ) ( ) STATIC CHARACTERISTICS P50E-5 RISE TIME & FALL TIME P50E-5 ¡ ¡ (P50E-5) ¡OVERCURRENT CHARACTERISTICS ¡DERATING CURVE A-77 Ordering information Unit type P 100 E -5 -O P100E P 12345 1Series name R 2Output wattage 3UL recognized,TuV approved, CSA certified:E 4Output voltage 5Optional *3 C :with Coating G :Low leakage current N :with Cover MODEL P100E-5 P100E-9 P100E-12 P100E-15 P100E-18 P100E-24 P100E-30 P100E-48 MAX OUTPUT WATTAGE[W] 100 100.8 102 105 100.8 108 99 100.8 DC OUTPUT 5V 20A 9V 11.2A 12V 8.5A 15V 7A 18V 5.6A 24V 4.5A 30V 3.3A 48V 2.1A SPECIFICATIONS MODEL P100E-5 P100E-9 P100E-12 P100E-15 P100E-18 P100E-24 P100E-30 P100E-48 VOLTAGE[V] AC85 - 132 / 170 - 264 1 (User-selectable) or DC220 - 370 f *1 ( ) ACIN 100V 2.2typ Io=100% CURRENT[A] *1 ( ) ACIN 200V 1.2typ Io=100% INPUT FREQUENCY[Hz] 47 - 440 EFFICIENCY[%] 78typ 78typ 80typ 82typ 82typ 84typ 78typ 84typ ( ) ACIN 100V 15typ Io=100% INRUSH CURRENT[A] ACIN 200V 30typ (Io=100%) VOLTAGE[V] 5 9 121518243048 CURRENT[A] 20 11.2 8.5 7 5.6 4.5 3.3 2.1 MAX OUTPUT WATTAGE[W] 100 100.8 102 105 100.8 108 99 100.8 LINE REGULATION[mV] 20max 36max 48max 60max 72max 96max 120max 192max LOAD REGULATION[mV] 40max 72max 100max 120max 150max 150max 180max 384max 2 OUTPUT RIPPLE[mVp-p] * 80max 120max 120max 120max 120max 120max 120max 150max *2 RIPPLE NOISE[mVp-p] 120max 150max 150max 150max 250max 150max 150max 250max TEMPERATURE REGULATION[mV] 0to+50 50max 90max 120max 150max 180max 240max 300max 480max C OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 10% t ( , ) START-UP TIME[ms] 200max ACIN 85V Io=100% ( , ) ( , ) HOLD-UP TIME[ms] 15typ ACIN 85V Io=100% 25typ ACIN 100V Io=100% OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically PROTECTION CIRCUIT OVERVOLTAGE PROTECTION Works at 115 - 140% of rating , , , ( ) INPUT-OUTPUT AC3 000V 1minute Cutoff current = 10mA DC500V 50M min At Room Temperature W ISOLATION INPUT-FG AC2,000V 1minute, Cutoff current = 10mA, DC500V 50M min (At Room Temperature) W , , ( ) OUTPUT-FG AC500V 1minute Cutoff current = 100mA DC500V 50M min At Room Temperature W , , ( )( ), , ( , ) OPERATING TEMP. HUMID.AND ALTITUDE -10 to +65 30 - 90%RH Non condensing Refer to DERATING CURVE 3 000m 10 000feet max C STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75 , 20 - 90%RH (Non condensing), 9,000m (30,000feet) max C ENVIRONMENT 2 , ( ), , , VIBRATION 10 - 55Hz 19.6m/s 2G 3minutes period 30minutes each along X Y and Z axis 2 ( ), , , IMPACT 196.1m/s 20G 11ms once each X Y and Z axis SAFETY AND AGENCY APPROVALS UL60950-1, EN60950-1, EN50178, CSA C22.2 No.60950-1 Complies with DEN-AN and IEC60950-1 NOISE REGULATIONS CONDUCTED NOISE Complies with FCC-A *1 The input current of the agency approved unit is indicated as 2.5A (ACIN100V) or 1.5A (ACIN200V). *2 According to 15MHz oscilloscope or Ripple-Noise meter (equivalent to KEISOKU-GIKEN : RM101). *3 Please contact us about safety approvals for the model with option. * Derating is required when operated with case cover. * Parallel operation with other model is not possible. A-78 P100E P External view ¶Weight : 700g or less (without cover) ¶Cover is optional ¶Tolerance : t1 ¶Dimensions in mm. . . ¶Mounting torque:1.2N m(12.8kgf cm)max Performance data (P100E-5) (P100E-5 ) ¡STATIC CHARACTERISTICS ¡RISE TIME & FALL TIME ( ) OVERCURRENT CHARACTERISTICS P100E-5 DERATING CURVE ¡ ¡ A-79 Ordering information Unit type P 150 E -5 -O P150E P 12345 1Series name R 2Output wattage 3UL recognized,TuV approved, CSA certified:E 4Output voltage 5Optional *3 C :with Coating G :Low leakage current N :with Cover MODEL P150E-5 P150E-9 P150E-12 P150E-15 P150E-18 P150E-24 P150E-30 P150E-48 MAX OUTPUT WATTAGE[W] 150 150.3 156 150 151.2 156 150 158.4 DC OUTPUT 5V 30A 9V 16.7A 12V 13A 15V 10A 18V 8.4A 24V 6.5A 30V 5.0A 48V 3.3A SPECIFICATIONS MODEL P150E-5 P150E-9 P150E-12 P150E-15 P150E-18 P150E-24 P150E-30 P150E-48 VOLTAGE[V] AC85 - 132 / 170 - 264 1 (User-selectable) or DC220 - 370 f *1 ( ) ACIN 100V 3.2typ Io=100% CURRENT[A] *1 ( ) ACIN 200V 1.7typ Io=100% INPUT FREQUENCY[Hz] 47 - 440 EFFICIENCY[%] 78typ 78typ 80typ 81typ 82typ 82typ 82typ 85typ ( ) ACIN 100V 15typ Io=100% INRUSH CURRENT[A] ACIN 200V 30typ (Io=100%) VOLTAGE[V] 5 9 121518243048 CURRENT[A] 30 16.7 13 10 8.4 6.5 5.0 3.3 MAX OUTPUT WATTAGE[W] 150 150.3 156 150 151.2 156 150 158.4 LINE REGULATION[mV] 20max 36max 48max 60max 72max 96max 120max 192max LOAD REGULATION[mV] 40max 72max 100max 120max 150max 150max 190max 240max 2 OUTPUT RIPPLE[mVp-p] * 80max 120max 120max 120max 120max 120max 150max 150max *2 RIPPLE NOISE[mVp-p] 120max 150max 150max 150max 250max 150max 180max 200max TEMPERATURE REGULATION[mV] 0to+50 50max 90max 120max 150max 180max 240max 300max 480max C OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 10% t ( , ) START-UP TIME[ms] 200max ACIN 85V Io=100% ( , ) ( , ) HOLD-UP TIME[ms] 15typ ACIN 85V Io=100% 25typ ACIN 100V Io=100% OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically PROTECTION CIRCUIT OVERVOLTAGE PROTECTION Works at 115 - 140% of rating , , , ( ) INPUT-OUTPUT AC3 000V 1minute Cutoff current = 10mA DC500V 50M min At Room Temperature W ISOLATION INPUT-FG AC2,000V 1minute, Cutoff current = 10mA, DC500V 50M min (At Room Temperature) W , , ( ) OUTPUT-FG AC500V 1minute Cutoff current = 100mA DC500V 50M min At Room Temperature W , , ( )( ), , ( , ) OPERATING TEMP. HUMID.AND ALTITUDE -10 to +65 30 - 90%RH Non condensing Refer to DERATING CURVE 3 000m 10 000feet max C STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75 , 20 - 90%RH (Non condensing), 9,000m (30,000feet) max C ENVIRONMENT 2 , ( ), , , VIBRATION 10 - 55Hz 19.6m/s 2G 3minutes period 30minutes each along X Y and Z axis 2 ( ), , , IMPACT 196.1m/s 20G 11ms once each X Y and Z axis SAFETY AND AGENCY APPROVALS UL60950-1, EN60950-1, EN50178, CSA C22.2 No.60950-1 Complies with DEN-AN and IEC60950-1 NOISE REGULATIONS CONDUCTED NOISE Complies with FCC-A *1 The input current of the agency approved unit is indicated as 3.5A (ACIN100V) or 1.7A (ACIN200V). *2 According to 15MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN : RM101). *3 Please contact us about safety approvals for the model with option. * Derating is required when operated with case cover. * Parallel operation with other model is not possible. A-80 P150E P External view ¶Weight : 900g or less (without cover) ¶Cover is optional ¶Tolerance : t1 ¶Dimensions in mm. . . ¶Mounting torque:1.2N m(12.8kgf cm)max Performance data ( ) ( ) STATIC CHARACTERISTICS P150E-5 RISE TIME & FALL TIME P150E-5 ¡ ¡ (P150E-5) ¡OVERCURRENT CHARACTERISTICS ¡DERATING CURVE A-81 Ordering information Unit type P 300 E -5 -O P300E P 12345 1Series name R 2Output wattage 3UL recognized,TuV approved, CSA certified:E 4Output voltage 5Optional *3 C :with Coating G :Low leakage current R :Positive logic control MODEL P300E-5 P300E-12 P300E-15 P300E-18 P300E-24 P300E-30 P300E-48 MAX OUTPUT WATTAGE[W] 300 324 330 306 336 300 312 DC OUTPUT 5V 60A 12V 27A 15V 22A 18V 17A 24V 14A 30V 10A 48V 6.5A SPECIFICATIONS MODEL P300E-5 P300E-12 P300E-15 P300E-18 P300E-24 P300E-30 P300E-48 ( ) VOLTAGE[V] AC85 - 132 / 170 - 264 1 Auto-selectable f 1 ( ) ACIN 100V* 5.5typ Io=100% CURRENT[A] *1 ( ) ACIN 200V 3.5typ Io=100% INPUT FREQUENCY[Hz] 47-63 EFFICIENCY[%] 74typ 78typ 81typ 81typ 83typ 78typ 79typ ( )( ) ACIN 100V 25/40typ Io=100% Primary inrush current /Secondary inrush current INRUSH CURRENT[A] ( )( ) ACIN 200V 50/40typ Io=100% Primary inrush current /Secondary inrush current VOLTAGE[V] 5 121518243048 CURRENT[A] 60 27 22 17 14 10 6.5 MAX OUTPUT WATTAGE[W] 300 324 330 306 336 300 312 LINE REGULATION[mV] 20max 48max 60max 72max 96max 120max 192max LOAD REGULATION[mV] 40max 100max 120max 144max 150max 180max 300max *2 OUTPUT RIPPLE[mVp-p] 80max 120max 120max 120max 120max 120max 150max 2 RIPPLE NOISE[mVp-p] * 120max 150max 150max 150max 150max 200max 400max TEMPERATURE REGULATION[mV] 0to+50 50max 120max 150max 180max 240max 300max 480max C OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 10% t START-UP TIME[ms] 300max (ACIN 85/170V, Io=100%) ( , ) ( , ) HOLD-UP TIME[ms] 20typ ACIN 85/170V Io=100% 40typ ACIN 100/200V Io=100% OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically PROTECTION CIRCUIT OVERVOLTAGE PROTECTION Works at 115 - 140% of rating , , , ( ) INPUT-OUTPUT RC AC3 000V 1minute Cutoff current = 10mA DC500V 50M min At Room Temperature - W , , , ( ) INPUT-FG AC2 000V 1minute Cutoff current = 10mA DC500V 50M min At Room Temperature W ISOLATION OUTPUT RC-FG AC500V 1minute, Cutoff current = 100mA, DC500V 50M min (At Room Temperature) - W , , ( ) OUTPUT-RC AC100V 1minute Cutoff current = 100mA DC100V 50M min At Room Temperature W , , ( )( ), , ( , ) OPERATING TEMP. HUMID.AND ALTITUDE -10 to +60 20 - 95%RH Non condensing Refer to DERATING CURVE 3 000m 10 000feet max C STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75 , 20 - 95%RH (Non condensing), 9,000m (30,000feet) max C ENVIRONMENT 2 , ( ), , , VIBRATION 10 - 55Hz 19.6m/s 2G 3minutes period 30minutes each along X Y and Z axis 2 ( ), , , IMPACT 196.1m/s 20G 11ms once each X Y and Z axis SAFETY AND AGENCY APPROVALS UL60950-1, EN60950-1, EN50178, CSA C22.2 No.60950-1 Complies with DEN-AN and IEC60950-1 NOISE REGULATIONS CONDUCTED NOISE Complies with FCC-A *1 The input current of the agency approved unit is indicated as 6.5A (ACIN 100V) or 3.6A (ACIN 200V). *2 According to 15MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN : RM101). *3 Please contact us about safety approvals for the model with option. A-82 P300E P External view ¶Weight : 2.5kg or less ¶Tolerance : t1 ¶Dimensions in mm. . . ¶Mounting torque:1.5N m(16kgf cm)max Performance data ¡Automatic Input Voltage Selector Requires no manual adjusutment(wire or Short-pieces) . P300 unit detects input voltage then select circuit to match applied input voltage. ¡Automatic Current sharing ¡ Output voltage is controlled by a potentiometer in master unit. Turn slave unit's potentiometer clock wise all the way to the end. ¡ Maximun output current can be determined by using the following formula: Total output current = 0.9 †(Rated current per unit)† Number of units paralleled ¡ Five units maximum for the parallel operation. ¡DERATING CURVE The shadow indicates the region where different * specifications for ripple noise should be used. A-83 Ordering information Unit type P 600 E -5 -O P600E P 12345 1Series name R 2Output wattage 3UL recognized,TuV approved, CSA certified:E 4Output voltage 5Optional *3 C :with Coating G :Low leakage current R :Positive logic control MODEL P600E-5 P600E-12 P600E-15 P600E-18 P600E-24 P600E-30 P600E-48 MAX OUTPUT WATTAGE[W] 600 636 645 612 648 600 624 DC OUTPUT 5V 120A 12V 53A 15V 43A 18V 34A 24V 27A 30V 20A 48V 13A SPECIFICATIONS MODEL P600E-5 P600E-12 P600E-15 P600E-18 P600E-24 P600E-30 P600E-48 ( ) VOLTAGE[V] AC85 - 132 / 170 - 264 1 Auto-selectable f 1 ( ) ACIN 100V* 11typ Io=100% CURRENT[A] *1 ( ) ACIN 200V 6typ Io=100% INPUT FREQUENCY[Hz] 47-63 EFFICIENCY[%] 77typ 80typ 81typ 80typ 84typ 81typ 80typ ( )( ) ACIN 100V 30/50typ Io=100% Primary inrush current /Secondary inrush current INRUSH CURRENT[A] ( )( ) ACIN 200V 60/50typ Io=100% Primary inrush current /Secondary inrush current VOLTAGE[V] 5 121518243048 CURRENT[A] 120 53 43 34 27 20 13 MAX OUTPUT WATTAGE[W] 600 636 645 612 648 600 624 LINE REGULATION[mV] 20max 48max 60max 72max 96max 120max 192max LOAD REGULATION[mV] 40max 100max 120max 144max 150max 180max 300max *2 OUTPUT RIPPLE[mVp-p] 80max 120max 120max 120max 120max 150max 150max 2 RIPPLE NOISE[mVp-p] * 120max 150max 150max 150max 150max 200max 400max TEMPERATURE REGULATION[mV] 0to+50 50max 120max 150max 180max 240max 300max 480max C OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 10% t START-UP TIME[ms] 300max (ACIN 85/170V, Io=100%) ( , ) HOLD-UP TIME[ms] 20typ ACIN 85/170V Io=100% OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically PROTECTION CIRCUIT OVERVOLTAGE PROTECTION Works at 115 - 140% of rating , , , ( ) INPUT-OUTPUT RC AC3 000V 1minute Cutoff current = 10mA DC500V 50M min At Room Temperature - W , , , ( ) INPUT-FG AC2 000V 1minute Cutoff current = 10mA DC500V 50M min At Room Temperature W ISOLATION OUTPUT RC-FG AC500V 1minute, Cutoff current = 100mA, DC500V 50M min (At Room Temperature) - W , , ( ) OUTPUT-RC AC100V 1minute Cutoff current = 100mA DC100V 50M min At Room Temperature W , , ( )( ), , ( , ) OPERATING TEMP. HUMID.AND ALTITUDE 0to+60 30 - 90%RH Non condensing Refer to DERATING CURVE 3 000m 10 000feet max C STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75 , 20 - 90%RH (Non condensing), 9,000m (30,000feet) max C ENVIRONMENT 2 , ( ), , , VIBRATION 10 - 55Hz 19.6m/s 2G 3minutes period 30minutes each along X Y and Z axis 2 ( ), , , IMPACT 196.1m/s 20G 11ms once each X Y and Z axis SAFETY AND AGENCY APPROVALS UL60950-1, EN60950-1, EN50178, CSA C22.2 No.60950-1 Complies with DEN-AN and IEC60950-1 NOISE REGULATIONS CONDUCTED NOISE Complies with FCC-A *1 The input current of the agency approved unit is indicated as 11.6A (ACIN 100V) or 6.2A (ACIN 200V). *2 According to 15MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN : RM101). *3 Please contact us about safety approvals for the model with option. A-84 P600E P External view ¶Weight : 4kg or less ¶Tolerance : t1 ¶Dimensions in mm. . . ¶Mounting torque:1.5N m(16kgf cm)max Performance data ¡Automatic Input Voltage Selector Requires no manual adjusutment(wire or Short-pieces) . P600 unit detects input voltage then select circuit to match applied input voltage. ¡Automatic Current sharing ¡ Output voltage is controlled by a potentiometer in master unit. Turn slave unit's potentiometer clock wise all the way to the end. ¡ Maximun output current can be determined by using the following formula: Total output current = 0.9 †(Rated current per unit)† Number of units paralleled ¡ Five units maximum for the parallel operation. ¡DERATING CURVE The shadow indicates the region where different * specifications for ripple noise should be used. A-85 Ordering information Unit type P 1500 E -5 -O P1500E P 12345 1Series name R 2Output wattage 3UL recognized,TuV approved, CSA certified:E 4Output voltage 5Optional *3 C :with Coating MODEL P1500E-5 P1500E-12 P1500E-15 P1500E-18 P1500E-24 MAX OUTPUT WATTAGE[W] 1500 1500 1500 1512 1560 DC OUTPUT 5V 300A 12V 125A 15V 100A 18V 84A 24V 65A SPECIFICATIONS MODEL P1500E-5 P1500E-12 P1500E-15 P1500E-18 P1500E-24 ( ) VOLTAGE[V] AC85 - 132 / 170 - 264 1 User-selectable or DC220 - 370 f 1 ( ) ACIN 100V* 29typ Io=100% CURRENT[A] *1 ( ) ACIN 200V 18typ Io=100% INPUT FREQUENCY[Hz] 47 - 440 EFFICIENCY[%] 78typ 81typ 81typ 81typ 83typ ( )( ) ACIN 100V 25/150typ Io=100% Primary inrush current /Secondary inrush current INRUSH CURRENT[A] ( )( ) ACIN 200V 50/150typ Io=100% Primary inrush current /Secondary inrush current VOLTAGE[V] 5 12151824 CURRENT[A] 300 125 100 84 65 MAX OUTPUT WATTAGE[W] 1500 1500 1500 1512 1560 LINE REGULATION[mV] 20max 48max 60max 72max 96max LOAD REGULATION[mV] 40max 100max 120max 150max 150max *2 OUTPUT RIPPLE[mVp-p] 80max 120max 120max 120max 120max 2 RIPPLE NOISE[mVp-p] * 120max 150max 150max 150max 150max TEMPERATURE REGULATION[mV] 0to+50 50max 120max 150max 180max 240max C OUTPUT VOLTAGE ADJUSTMENT RANGE[V] -20 to +10% START-UP TIME[ms] 800max (ACIN 85/170V, Io=100%) ( , ) ( , ) HOLD-UP TIME[ms] 10typ ACIN 85/170V Io=100% 20typ ACIN 100/200V Io=100% OVERCURRENT PROTECTION Works over 105% of rating PROTECTION CIRCUIT OVERVOLTAGE PROTECTION Works at 115 - 140% of rating , , , ( ) INPUT-OUTPUT RC AC3 000V 1minute Cutoff current = 10mA DC500V 50M min At Room Temperature - W , , , ( ) INPUT-FG AC2 000V 1minute Cutoff current = 10mA DC500V 50M min At Room Temperature W ISOLATION OUTPUT RC-FG AC500V 1minute, Cutoff current = 100mA, DC500V 50M min (At Room Temperature) - W , , ( ) OUTPUT-RC AC100V 1minute Cutoff current = 100mA DC100V 50M min At Room Temperature W , , ( )( ), , ( , ) OPERATING TEMP. HUMID.AND ALTITUDE -10 to +60 30 - 90%RH Non condensing Refer to DERATING CURVE 3 000m 10 000feet max C STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75 , 20 - 90%RH (Non condensing), 9,000m (30,000feet) max C ENVIRONMENT 2 , ( ), , , VIBRATION 10 - 55Hz 19.6m/s 2G 3minutes period 30minutes each along X Y and Z axis 2 ( ), , , IMPACT 196.1m/s 20G 11ms once each X Y and Z axis SAFETY AND AGENCY APPROVALS UL60950-1, EN60950-1, EN50178, CSA C22.2 No.60950-1 Complies with DEN-AN and IEC60950-1 NOISE REGULATIONS CONDUCTED NOISE Complies with FCC-A *1 The input current of the agency approved unit is indicated as 27A (ACIN 100V) or 17A (ACIN 200V). *2 According to 15MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN : RM101). *3 Please contact us about safety approvals for the model with option. A-86 P1500E P External view 100/200V max 30 300 Change 24.5 16 max Short 100V Name Plate 25 Open 200V RCG RC AC(N) CB VB AC(L) -S -M Short-piece +M M4 +S Output Terminal(-) Output Terminal(+) FG Hole M4 Voltage Adjust 4-M4 (Bottom) 10 0.5 275± LED 54 max 50 10 4 Mounting Hole 0.5 275± (+)(-)Terminal in detail 4P Terminal in detail for Left side 2–M5 M5 2– º 9 AIR FLOW (Bottom) ¶Weight : 7kg or less 4-M4 (Both sides) 10 15 ¶Tolerance : ±1 Mounting Hole ¶Mounting torque : 1.5N · m(16kgf · cm)max ¶Dimensions in mm. Performance data EXAMPLE • ¡Automatic Current sharing ¡ Output voltage is controlled by a potentiometer in master unit. Turn slave unit's potentiometer clock wise all the way to the end. ¡ Maximun output current can be determined by using the following formula: Total output current = 0.9 †(Rated current per unit)† Number of units paralleled ¡ Five units maximum for the parallel operation. DERATING CURVE ¡ The shadow indicates the region where different * specifications for ripple noise should be used. A-87 37.5 25 20 16 13 5.5 137 5 20 5 15.25 9.5 8.1 147.5 117.5 28 15 0.5 10 72± 0.5 180± 97 200 Ordering information Unit type P T 1500 U -5 -O PT1500U P 123456 1Series name R 2Triple input phase 3Output wattage 4UL recognized,CSA certi- fied:U 5Output voltage 6Optional *3 C :with Coating MODEL PT1500U-5 PT1500U-24 OUTPUT VOLTAGE[V] 5 24 OUTPUT CURRENT[A] 300 65 SPECIFICATIONS MODEL PT1500U-5 PT1500U-24 VOLTAGE[V] AC170 - 264 3 f ( ) CURRENT[A] ACIN 200V 6typ Io=100% FREQUENCY[Hz] 47-63 INPUT EFFICIENCY[%] 80typ 83typ ( ) POWER FACTOR ACIN 200V 0.95typ Io=100% INRUSH CURRENT[A] ACIN 200V 40typ ( , ) ( ) LEAKAGE CURRENT[mA] 0.75max 60Hz by UL CSA standards / 1.0max 60Hz by DEN-AN VOLTAGE[V]524 CURRENT[A] 300 65 MAX OUTPUT WATTAGE[W] 1500 1560 LINE REGULATION[mV] 20max 96max LOAD REGULATION[mV] 40max 150max *2 0to+50 80max 120max C RIPPLE[mVp-p] 2 -10-0 * 140max 160max C OUTPUT *2 0to+50 120max 150max C RIPPLE NOISE[mVp-p] *2 -10-0 160max 180max C TEMPERATURE REGULATION[mV] 0to+50 50max 240max C *1 DRIFT[mV] 20max 96max ( , ) START-UP TIME[ms] 800max ACIN 170V Io=100% HOLD-UP TIME[ms] 20typ (ACIN 200V, Io=100%, 0to+50 ) 10typ (ACIN 170V, Io=100%, 0to+50 ) C C OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 4.00 - 5.50 19.20 - 26.40 OVERCURRENT PROTECTION Works over 105% of rating OVERVOLTAGE PROTECTION Works at 115 - 140% of rating PROTECTION ( ) OPERATING INDICATION LED Green CIRCUIT REMOTE SENSING Provided REMOTE ON/OFF Provided (isolated from output) , , , ( ) INPUT-OUTPUT AC3 000V 1minute Cutoff current = 10mA DC500V 50M min At Room Temperature W , , , ( ) INPUT-FG AC1 500V 1minute Cutoff current = 10mA DC500V 50M min At Room Temperature W ISOLATION OUTPUT-FG, COVER AC500V 1minute, Cutoff current = 100mA, DC500V 50M min (At Room Temperature) W , , ( ) OUTPUT-RC AC100V 1minute Cutoff current = 100mA DC100V 50M min At Room Temperature W , ( ), , ( , ) OPERATING TEMP. HUMID.AND ALTITUDE -10 to +50 Refer to DERATING CURVE 3 000m 10 000feet max C STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75 , 9,000m (30,000feet) max C ENVIRONMENT 2 , ( ), , , VIBRATION 10 - 55Hz 19.6m/s 2G 3minutes period 60minutes each along X Y and Z axis 2 ( ), , , IMPACT 196.1m/s 20G 11ms once each X Y and Z axis SAFETY AND AGENCY APPROVALS UL60950-1, CSA C22.2 No.60950-1 Complies with DEN-AN NOISE REGULATIONS CONDUCTED NOISE Complies with FCC-A *1 Drift is change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. *2 According to 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN : RM101). *3 Please contact us about safety approvals for the model with option. A-88 PT1500U P External view max 30 300 max (24.5) 16 Name Plate 25 ACG M4 RCG L3 RC L2 CB VB L1 -S -M Short-piece +M M4 +S Output Terminal(-) Output Terminal(+) FG Hole M4 Voltage Adjust 10 4-M4 (Bottom) 0.5 LED 275± (54) max max Mounting Hole 10 50 4 0.5 275± (+)(-)Terminal in detail 4P Terminal in detail for Left side 2–M5 M5 2– º 9 AIR FLOW (Bottom) ¶Weight : 7.6kg or less 4-M4 (Both sides) 10 15 ¶Tolerance : ±1 Mounting Hole ¶Mounting torque : 1.5N · m(16kgf · cm)max ¶Dimensions in mm. Performance data EXAMPLE • ¡Automatic Current sharing ¡ Output voltage is controlled by the Output Voltage Adjuster in Master unit. Turn Slave unit's Output Voltage Potentiometer clockwise all the end. ¡ Maximun output current can be determined by using the following formula: Total output current = 0.9 †(Rated current per unit)† Number of units paralleled ¡ Five units maximum for the parallel operation. ¡DERATING CURVE The shadow indicates the region where different * specifications on ripple and ripple noise should be used. A-89 (37.5) (25) 20 16 5.5 13 137 55 20 (15.25) 9.5 8.1 147.5 117.5 28 15 0.5 10 0.5 72± 180± 97 200