LEB225F-0524 - COSEL - Elite.Parts

Description

Cosel LEB225F-0524 Power Supply - +5V/5A, +24V/9(Peak 14)A output Universal input power supply; 85~264VAC/ 120~370VDC input

Part Number

LEB225F-0524

Price

Request Quote

Manufacturer

COSEL

Lead Time

Request Quote

Category

INTEGRATED CIRCUIT

Specifications

AGENCY APPROVALS

UL60950-1, C-UL, EN60950-1, EN50178 Complies with DEN-AN and IEC60950-1 (At only AC input)

Altitude

Operating:3,000m (10,000feet) max; Storage:9,000m (30,000feet) max

CASE SIZE/WEIGHT

95X45X222mm [3.74X1.77X8.74 inches] (WXHXD) /700g max (without chassis and cover)

Conducted Noise

Complies with FCC-B, CISPR22-B, EN55022-B, VCCI-B

COOLING METHOD

Convection

DRIFT[mV]

+5:20max; +24:96max

Harmonic Attenuator

Complies with IEC61000-3-2

Hold-Up Time[ms]

+5:40typ; +24:20typ

Humidity

Operating:20 - 90%RH (Non condensing) (Refer to DERATING CURVE); Storage:20 - 90%RH (Non condensing)

Impact

196.1m/s2 (20G), 11ms, once each X, Y and Z axis

Input CURRENT[A]

ACIN 100V:3.0typ (Io is 100%); ACIN 200V:1.5typ (Io is 100%)

Input EFFICIENCY[%]

ACIN 100V:81typ (Io is 100%); ACIN 200V:83typ (Io is 100%)

Input Frequency{Hz}

50/60 (47 - 63) or DC

Input Inrush Current[A]

ACIN 100V:15typ (Io is 100%) (More than 3sec.to re-start); ACIN 200V:30typ (Io is 100%) (More than 3sec.to re-start)

Input Leakage Current[mA]

0.75max (60Hz, According to IEC60950 and DEN-AN)

Input Power Factor

ACIN 100V:0.99typ; ACIN 200V:0.93typ

Input VOLTAGE[V]

AC85 - 264 or DC 120 - 370

Isolation

INPUT-OUTPUT, RC:AC3,000V 1minute, Cutoff current equals 10mA, DC500V 50O min (At Room Temperature); INPUT-FG:AC2,000V 1minute, Cutoff current equals 10mA, DC500V 50O min (At Room Temperature); OUTPUT-RC-FG:AC500V 1minute, Cutoff current equals 100mA, DC500V 50O min (At Room Temperature); Output-Output(V1-RC-V2):AC100V 1minute, Cutoff current equals 100mA, DC100V 10O min (At Room Temperature)

LINE REGULATION[mV]

+5:20max; +24:96max

LOAD REGULATION[mV]

+5:40max; +24:150max

Output CURRENT[A]

0-5; 0-9 (Peak 14)

OUTPUT VOLTAGE ADJUSTMENT RANGE[V]

+5:4.5 - 5.5; +24:Fixed

OUTPUT VOLTAGE SETTING[V]

+5:n/a; +24:23.0 - 25.0

Output VOLTAGE[V]

+5; +24

OVERCURRENT PROTECTION

Works over 101 to 105% of rating current and recovers automatically

Overvoltage Protection

Works over 115% of rating, by zener diode clamping; Works at 115 - 140% of rating

Remote On/Off

Option (Refer to Instruction Manual)

RIPPLE NOISE[mVp-p]

0 to 40°C +5:120max; +24:150max; -10 to 0°C +5:160max; +24:180max

RIPPLE[mVp-p]

0 to 40°C +5:80max; +24:120max; -10 to 0°C +5:140max; +24:160max

START-UP TIME[ms]

+5:250max; +24:500max

Temperature

Operating:-10 to +70°C; Storage:-20 to +75°C

TEMPERATURE REGULATION[mV]

0 to 40°C +5:50max; +24:240max; -10 to 0°C +5:60max; +24:290max

Total Output Wattage[W]

225 (Peak 345)

Vibration

10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis

Datasheet

Cosel=LEB225F-0524=datasheet1-1729684775.pdf

127 KiB

Download

Extracted Text

Home > Product Details LEB225F Features Harmonic attenuator, PFC (Complies with IEC61000-3-2) Universal input (AC85-264V) Remote ON/OFF Control (Optional) Rugged PCB type RoHS Compliant Safety Agency Approvals Complies with DEN-AN UL1950, C-UL recognized, TUV approved EMI Compliance FCC-B CISPR22-B EN55022-B VCCI-B CE Markings Low Voltage Directive EMC Directive Input Output DC Voltage Wattage Output Model [V] [W] [V/A] EMC Compliance EN61000-4-2 DC 120 - 5 - 12V LEB225F- 145 EN61000-4-3 370 5 - 10A 0512 (peak 265) EN61000-4-4 AC 85 - 264 (peak 20A) EN61000-4-5 DC 120 - 3.3 - 24V EN61000-4-6 LEB225F- 225 370 5 - 9A 0324 (peak 345) EN61000-4-8 AC 85 - 264 (peak 14A) EN61000-4-11 DC 120 - 5 - 24V EN55022-B LEB225F- 225 370 5 - 9A EN61000-3-2 0524 (peak 345) AC 85 - 264 (peak 14A) 2 year warranty(refer to Instruction Manual) DC 120 - 5 - 30V LEB225F- 225 370 5 - 7.2A 0530 (peak 345) AC 85 - 264 (peak 11A) DC 120 - 5 - 36V LEB225F- 225 370 5 - 6A 0536 (peak 345) AC 85 - 264 (peak 9.3A) Ordering information Rugged PCB type LEB 225 F -05 24 -O LEB225F 123456 1Series name R Recommended Noise Filter 2Output wattage NAC-06-472 3Universal input 4V1 Output voltage 5V2 Output voltage 6Optional *1 G :Low leakage current R :with Remote ON/OFF S :with Chassis High voltage pulse noise type : NAP series SN:with Chassis & cover Low leakage current type : NAM series T :Vertical terminal block *The Noise Filter is recommended Y :with Potentiometer *to connect with several devices. Z :with ZT MODEL LEB225F-0512 LEB225F-0324 LEB225F-0524 LEB225F-0530 LEB225F-0536 V1 +5V 5A +3.3V 5A +5V 5A +5V 5A +5V 5A DC OUTPUT ( ) ( ) ( ) ( ) ( ) V2 +12V 10 Peak 20 A +24V 9 Peak 14 A +24V 9 Peak 14 A +30V 7.2 Peak 11 A +36V 6 Peak 9.3 A SPECIFICATIONS MODEL LEB225F-0512 LEB225F-0324 LEB225F-0524 LEB225F-0530 LEB225F-0536 = = VOLTAGE[V] AC85 - 264 1 or DC 120 - 370 f ( ) ( ) ACIN 100V 1.9typ Io=100% 3.0typ Io=100% CURRENT[A] ACIN 200V 1.0typ (Io=100%) 1.5typ (Io=100%) ( ) FREQUENCY[Hz] 50/60 47-63 or DC ACIN 100V 77typ (Io=100%) 81typ (Io=100%) 81typ (Io=100%) 81typ (Io=100%) 81typ (Io=100%) EFFICIENCY[%] ( ) ( ) ( ) ( ) ( ) INPUT ACIN 200V 79typ Io=100% 83typ Io=100% 83typ Io=100% 83typ Io=100% 83typ Io=100% ACIN 100V 0.98typ 0.99typ POWER FACTOR ACIN 200V 0.93typ ACIN 100V 15typ (Io=100%)(More than 3sec.to re-start) INRUSH CURRENT[A] ( )( ) ACIN 200V 30typ Io=100% More than 3sec.to re-start LEB LEAKAGE CURRENT[mA] 0.75max (60Hz, According to IEC60950 and DEN-AN) VOLTAGE[V] +5 +12 +3.3 +24 +5 +24 +5 +30 +5 +36 CURRENT[A] *2 0-5 0-10 (Peak 20) 0-5 0-9 (Peak 14) 0-5 0-9 (Peak 14) 0-5 0 - 7.2 (Peak 11) 0-5 0-6 (Peak 9.3) 3 ( ) ( ) ( ) ( ) ( ) TOTAL OUTPUT WATTAGE[W] * 145 Peak 265 225 Peak 345 225 Peak 345 225 Peak 345 225 Peak 345 LINE REGULATION[mV] 20max 48max 20max 96max 20max 96max 20max 120max 20max 144max LOAD REGULATION[mV] 40max 100max 40max 150max 40max 150max 40max 180max 40max 180max 0to+40 *4 80max 120max 80max 120max 80max 120max 80max 200max 80max 200max C RIPPLE[mVp-p] 4 -10-0 * 140max 160max 140max 160max 140max 160max 140max 240max 140max 240max C 0to+40 *4 120max 150max 120max 150max 120max 150max 120max 300max 120max 300max C OUTPUT RIPPLE NOISE[mVp-p] 4 -10-0 * 160max 180max 160max 180max 160max 180max 160max 360max 160max 360max C 0to+40 50max 120max 50max 240max 50max 240max 50max 300max 50max 300max C TEMPERATURE REGULATION[mV] -10 to +40 60max 150max 60max 290max 60max 290max 60max 350max 60max 350max C DRIFT[mV] *5 20max 48max 20max 96max 20max 96max 20max 120max 20max 144max 6 START-UP TIME[ms] * 250max 500max 250max 500max 250max 500max 250max 500max 250max 500max HOLD-UP TIME[ms] *6 40typ 20typ 40typ 20typ 40typ 20typ 40typ 20typ 40typ 20typ OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 4.5 - 5.5 Fixed 2.85 - 3.60 Fixed 4.5 - 5.5 Fixed 4.5 - 5.5 Fixed 4.5 - 5.5 Fixed OUTPUT VOLTAGE SETTING[V] 11.5 - 12.5 23.0 - 25.0 23.0 - 25.0 28.7 - 31.5 34.5 - 37.5 xx xx xx xx xx V1 Works over 105% of rating current and recovers automatically OVERCURRENT PROTECTION V2 Works over 101% of peak current and recovers automatically PROTECTION , CIRCUIT AND V1 Works over 115% of rating by zener diode clamping OVERVOLTAGE PROTECTION OTHERS V2 Works at 115 - 140% of rating ( ) REMOTE ON/OFF Option Refer to Instruction Manual INPUT-OUTPUT RC 7 AC3,000V 1minute, Cutoff current = 10mA, DC500V 50M min (At Room Temperature) - * W , , , ( ) INPUT-FG AC2 000V 1minute Cutoff current = 10mA DC500V 50M min At Room Temperature W ISOLATION OUTPUT RC-FG 7 AC500V 1minute, Cutoff current = 100mA, DC500V 50M min (At Room Temperature) - * W ( ) 7 , , ( ) OUTPUT-OUTPUT V1 RC-V2 * AC100V 1minute Cutoff current = 100mA DC100V 10M min At Room Temperature - W , , ( )( ), , ( , ) OPERATING TEMP. HUMID.AND ALTITUDE -10 to +70C 20 - 90%RH Non condensing Refer to DERATING CURVE 3 000m 10 000feet max , , ( ), , ( , ) STORAGE TEMP. HUMID.AND ALTITUDE -20 to +75 20 - 90%RH Non condensing 9 000m 30 000feet max C ENVIRONMENT 2 , ( ), , , VIBRATION 10 - 55Hz 19.6m/s 2G 3minutes period 60minutes each along X Y and Z axis 2 ( ), , , IMPACT 196.1m/s 20G 11ms once each X Y and Z axis , , , ( ) AGENCY APPROVALS UL60950-1 C-UL EN60950-1 EN50178 Complies with DEN-AN and IEC60950-1 At only AC input SAFETY AND , , , NOISE CONDUCTED NOISE Complies with FCC-B CISPR22-B EN55022-B VCCI-B REGULATIONS HARMONIC ATTENUATOR Complies with IEC61000-3-2 ( ) ( ) CASE SIZE/WEIGHT 95 45 222mm W H D /700g max without chassis and cover X X X X OTHERS COOLING METHOD Convection *1 Specification is changed at option, refer to Instruction Manual 5. with the input voltage held constant at the rated input/output. *6 ACIN 100V,lo=100% *2 Peak loading for 10sec. And Duty 35% max, refer to Instruction Manual 4. In detail. *7 Applicable when remote control (optional) is added. *3 Refer to Instruction Manual 2.2 in detail. * Series/Parallel operation is not possible. *4 This is the value that measured on measuring board with capacitor of 22mF within 150mm * Derating is required when operated with chassis and cover. from output terminal.Measured by 20MHz oscilloscope or Ripple-Noise meter (Equivalent to KEISOKU-GIKEN: RM101). * A sound may occur from power supply at peak loading. *5 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, =marked models are pending for safety approvals. Consult with us for delivery. F-6 LEB225F External view + 4-M4 0.5 235- 8 2-º4.5 Mounting Name plate Hole 5-º3.5 Mounting Hole CN1 FG 5 CN2 CN2 C1 19 3 AC (N) 1 1 AC (L) G2 CN1 +V2 6 7 G1 +V1 10 CN3 CN4 Connector for Remote Voltage ON/OFF (option) CN4 CN3 adjust(V1) + 0.5 5 124- Connector for -Z (option) (200) + 212 0.5 - 252 º4.5 + 222 0.5 235- 8 2-M4 Mounting Hole CN4 CN3 RC(-) RC(+) PCB t=1.6 + COM - PIN CONNECTION CN1 CN2 CN3 (Option) ¶Weight: 700g or less I / O Connector Mating Connector Terminal Pin No. Input Pin No. Output Pin No. Remote ON/OFF 1 (Without chassis and cover) CN1 Chain: SVH-21T-P1.1 1 AC(L) 1, 2, 3 G 2 RC(+) B3P5-VH VHR-5N 2 RC(-) ¶Tolerance: t1 Loose: BVH-21T-P1.1 2 4, 5, 6 V 2 Chain: SVH-21T-P1.1 ¶Dimensions in mm. CN2 3 AC(N) 7, 8 G 1 B10P-VH VHR-10N Loose: BVH-21T-P1.1 4 9, 10 V 1 CN4 (Option) ¶PCB Material : CEM3 CN3 Chain: SXH-001T-P0.6 5 FG Pin No. -Z ¶Chassis and cover is optional. B2B-XH-A XHP-2 (Option) Loose: BXH-001T-P0.6 1 + ¶Mounting torque: 1.5N ·m(16kgf·cm)max 2 COM CN4 Chain: SXH-001T-P0.6 B3B-XH-A XHP-3 (Option) Loose: BXH-001T-P0.6 3 - (Mfr: J.S.T.) ¶Keep drawing current per pin below 5A (7A at peak load) for CN2 Performance data LEB ( ) ( ) ¡RISE TIME & FALL TIME LEB225F-0524 ¡EFFICIENCY LEB225F-0524 86 +24V 84 ACIN 100V Io=100% 82 DC Output +5V 80 AC Input 78 Load factor100% Load factor 50% 76 60 100 140 180 220 260 300 100ms/DIV 20ms/DIV INPUT VOLTAGE V ( ) ( ) ¡INPUT HARMONIC CURRENT LEB225F-0524 ¡INPUT HARMONIC CURRENT LEB225F-0524 10 10 Harmonic current standard class A (at odd number) Harmonic current standard class A 1 1 Load factor 100% (at odd number) Input voltage AC 100V Load factor 100% Input voltage AC 230V 0.1 0.1 0.01 0.01 0.001 0.001 010 20 30 40 010 20 30 40 HARMONIC ORDER HARMONIC ORDER F-7 95 42 + 3max -0.5 5 85 (Lead) HARMONIC CURRENT A (15.5) + 0.5 65- 23 + 45-0.5 33 HARMONIC CURRENT A EFFICIENCY 4.5 4.5 30 52 15 108 58

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products