Manufacturers
COSEL LDA150W-24-H
Description
Cosel LDA150W-24 - Power Supply | 151.2W | 24V/6.3(10)A AC/DC | Open Frame | Single Output
Part Number
LDA150W-24-H
Price
Request Quote
Manufacturer
COSEL
Lead Time
Request Quote
Category
INTEGRATED CIRCUIT
Specifications
Agency Approvals
UL1950, EN60950, VDE0160, CSA C22.2 No.234 Complies with DEN-AN and IEC60950
Altitude
Operating:3,000m (10,000feet) max; Storage:9,000m (30,000feet) max
Case Size/Weight
75X37X222mm (WXHXD) /510g max (without chassis and cover)
Conducted Noise
Complies with FCC-B, CISPR22-B, EN55022-B, VCCI-B
Cooling method
Convection
DC Output
VOLTAGE[V]:24V; CURRENT[A]:6.3A
Drift[mV]
96max
Frequency[Hz]
47 - 440
Hold-Up Time[ms]
10typ (ACIN 85V, Io is 100%) 20typ (ACIN 100V, Io is 100%)
Humidity
Operating:20 - 90%RH (Non condensing) (Refer to DERATING CURVE); Storage:20 - 90%RH (Non condensing)
Impact
196.1m/s2 (20G), 11ms, once each X, Y and Z axis
INPUT CURRENT[A]
ACIN 100V:3.6typ (Io is 100%); ACIN 200V:2.0typ (Io is 100%)
Input EFFICIENCY[%]
85typ
Input Voltage[V]
AC 85 - 132 / 170 - 264
Inrush Current[A]
ACIN 200V:30typ (Io is 100%) (At cold start)
Isolation
INPUT-OUTPUT:AC3,000V 1minute, Cutoff current equals 10mA, DC500V 50MW min (At Room Temperature); INPUT-FG:AC2,000V 1minute, Cutoff current equals 10mA, DC500V 50MW min (At Room Temperature); OUTPUT-FG:AC500V 1minute, Cutoff current equals 100mA, DC500V 50MW min (At Room Temperature)
Leakage Current[mA]
0.75max (60Hz, According to UL, CSA, VDE and DEN-AN)
Line Regulation[mV]
96max
Load Regulation[mV]
150max
Max Output Wattage[W]
151.2W
Operating Indication
Not provided
Output Current[A]
6.3A
Output Voltage Adjustment Range[V]
Fixed ("Y"which can be adjusted the output is available as option :9 - 48Vt10%)
Output Voltage Setting[V]
23.0 - 25.0
Output Voltage[V]
24V
Overcurrent protection
Works over 105% of rating (-H : peak) and recovers automatically
Overvoltage Protection
4.00 - 5.25V, Works at 115 - 140% of rating
Remote On/Off
Option
Remote Sensing
Not provided
Ripple Noise[mVp-p]
0 to 50°C:150max; -10 to 0°C:180max
Ripple[mVp-p]
0 to 50°C:120max; -10 to 0°C:160max
Start-Up Time[ms]
200max (ACIN 100V, Io is 100%)
Temperature
Operating:-10 to +60°C; Storage:-20 to +75°C
Temperature Regulation[mV]
290max
Vibration
10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis
Datasheet
Extracted Text
Ordering information Rugged PCB type LDA 150 W -5 -O LDA150W 12345 1Series name R 2Output wattage 3Autoranging input 4Output voltage 5Optional C :with Coating G :Low leakage current L :with LED R :with Remote ON/OFF S :with Chassis SN:with Chassis & cover Y :with Potentiometer MODEL LDA150W-3 LDA150W-5 LDA150W-9 LDA150W-12 LDA150W-15 LDA150W-18 LDA150W-24 LDA150W-24-H LDA150W-30 LDA150W-48 MAX OUTPUT WATTAGE[W] 90 150 153 150 150 153 151.2 151.2 150 144 DC OUTPUT *3 3V 30A 5V 30A 9V 17A 12V 12.5A 15V 10A 18V 8.5A 24V 6.3A 24V 6.3(10)A 30V 5A 48V 3A SPECIFICATIONS MODEL LDA150W-3 LDA150W-5 LDA150W-9 LDA150W-12 LDA150W-15 LDA150W-18 LDA150W-24 LDA150W-24-H LDA150W-30 LDA150W-48 = = = = = VOLTAGE[V] AC 85 - 132 / 170 - 264 1 f LDA ( ) ACIN 100V 3.6typ Io=100% CURRENT[A] ( ) ACIN 200V 2.0typ Io=100% INPUT FREQUENCY[Hz] 47 - 440 EFFICIENCY[%] 75typ 79typ 79typ 82typ 83typ 84typ 85typ 85typ 85typ 82typ ( )( ) INRUSH CURRENT[A] ACIN 200V 30typ Io=100% At cold start ( , , , ) LEAKAGE CURRENT[mA] 0.75max 60Hz According to UL CSA VDE and DEN-AN VOLTAGE[V] 35912 15 18 24 24 30 48 CURRENT[A] *1 30 30 17 12.5 10 8.5 6.3 6.3(10)53 LINE REGULATION[mV] 20max 20max 36max 48max 60max 72max 96max 96max 120max 192max LOAD REGULATION[mV] 40max 40max 100max 100max 120max 120max 150max 150max 180max 240max 0to+50 80max 80max 120max 120max 120max 120max 120max 220max 120max 150max C RIPPLE[mVp-p] -10-0 140max 140max 160max 160max 160max 160max 160max 260max 160max 200max C 0to+50 120max 120max 150max 150max 150max 150max 150max 250max 150max 400max C OUTPUT RIPPLE NOISE[mVp-p] -10-0 160max 160max 180max 180max 180max 180max 180max 280max 180max 600max C TEMPERATURE REGULATION[mV] 60max 60max 120max 150max 180max 200max 290max 290max 360max 560max 2 DRIFT[mV] * 20max 20max 36max 48max 60max 72max 96max 96max 120max 192max ( , ) START-UP TIME[ms] 200max ACIN 100V Io=100% ( , ) ( , ) HOLD-UP TIME[ms] 10typ ACIN 85V Io=100% 20typ ACIN 100V Io=100% ( ) OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 2.85 - 3.6 4.5 - 5.5 Fixed "Y"which can be adjusted the output is available as option :9 - 48Vt10% OUTPUT VOLTAGE SETTING[V] 8.6 - 9.4 11.5 - 12.5 14.4 - 15.6 17.3 - 18.7 23.0 - 25.0 23.0 - 25.0 28.5 - 31.5 46.0 - 50.0 xx xx OVERCURRENT PROTECTION Works over 105% of rating (-H : peak) and recovers automatically OVERVOLTAGE PROTECTION 4.00 - 5.25V Works at 115 - 140% of rating PROTECTION CIRCUIT AND OPERATING INDICATION Not provided OTHERS REMOTE SENSING Not provided ( ) REMOTE ON/OFF Option Refer to Instruction Manual , , , ( ) INPUT-OUTPUT AC3 000V 1minute Cutoff current = 10mA DC500V 50M min At Room Temperature W , , , ( ) ISOLATION INPUT-FG AC2 000V 1minute Cutoff current = 10mA DC500V 50M min At Room Temperature W , , ( ) OUTPUT-FG AC500V 1minute Cutoff current = 100mA DC500V 50M min At Room Temperature W , , ( )( ) , ( , ) OPERATING TEMP. HUMID.AND ALTITUDE -10 to +60 20 - 90%RH Non condensing Refer to DERATING CURVE 3 000m 10 000feet max C , , ( ) , ( , ) STORAGE TEMP. HUMID.AND ALTITUDE -20 to +75C 20 - 90%RH Non condensing 9 000m 30 000feet max ENVIRONMENT 2 , ( ), , , VIBRATION 10 - 55Hz 19.6m/s 2G 3minutes period 60minutes each along X Y and Z axis 2 IMPACT 196.1m/s (20G), 11ms, once each X, Y and Z axis SAFETY AND AGENCY APPROVALS UL1950, EN60950, VDE0160, CSA C22.2 No.234 Complies with DEN-AN and IEC60950 NOISE CONDUCTED NOISE Complies with FCC-B, CISPR22-B, EN55022-B, VCCI-B REGULATIONS CASE SIZE/WEIGHT 75 37 222mm (W H D) /510g max (without chassis and cover) X X X X OTHERS COOLING METHOD Convection *1 Peak load for 10sec. or less is acceptable if the total wattage is less than the rated * Parallel operation with other model is not possible. wattage(24V:151.2W). * Derating is required when operated with chassis and cover. *2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, =marked models are pending for safety approvals. Consult with us for delivery. with the input voltage held constant at the rated input/output. *3 ( ) : peak current * Avoid prolonged use under over-load. D-38 LDA150W External view LDA Performance data ( ) ( ) STATIC CHARACTERISTICS LDA150W-5 RISE TIME & FALL TIME LDA150W-5 ¡ ¡ ( ) ¡OVERCURRENT CHARACTERISTICS LDA150W-5 ¡DERATING CURVE D-39
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the LDA150W-24-H have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Cosel CBS1002403 DC/DC Converter. 18-36DC Input Voltage | 100 W
Cosel CBS1002415 15V/6.7A DC/DC Converter
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods