CONTINUOUS COMPUTING ATCA-PP50

HARDWARE | AdvancedTCA FlexPacket ATCA-PP50 n AdvancedTCA Blade for Deep Packet Inspection n Ideal for Content-Aware Routing & Security Applications Targeting the needs of 3G Wireless and IP Multimedia Subsystem (IMS) ™ markets, FlexPacket ATCA-PP50 provides telecom equipment manufacturers FEATURES + BENEFITS with deep packet inspection capabilities to support advanced content-aware routing and security functions required by multi-service IP networks. The blade PROCESSING is engineered to meet the application needs of next generation infrastructure n Dual processor XLR732 multi-core MIPS64 processor including IPTV, radio network controllers (RNC), security gateways, session n Eight multi-threaded cores per XLR border controllers, WiMAX base station aggregation, and wireless xGSNs. improves code efficiency and development n Internal fast messaging network improves core efficiency and reduces latency The PP50 provides superior performance via one or two discrete multi-core n Integrated 10Gbps security acceleration MIPS64 packet processors. Each processor provides 8 multi-threaded cores engine to maximize security performance and contains a built-in security co-processor capable of handling up to 10Gbps n Mezzanines for TCAM or specialized off-load engines (including dedicated of bulk encryption / decryption (20Gbps per blade). The PP50 supports each user-specific ASIC / FPGA) processor with up to 8GB of memory (16GB per blade) as well as access to a TCAM and content-based processors via mezzanines. TCAM is especially mEmORy & STORAGE important for very high performance IPv6 routing platforms. n Up to 8GB per CPU (16GB per board) support for 667 / 800MHz DDR2 n TCAM support via mezzanine The PP50 interconnects the processors, I/O, and backplane fabrics using a n On-board CompactFlash and persistent non-blocking 10GbE switch. Each RMI XLR732 processor is provided with two SRAM 10GbE ports to the switch providing full duplex 10GbE capabilities. External I/O CONNECTIvITy is supported over a dual redundant 10GbE backplane fabric (PICMG 3.1.9) as n Base interface compliant to PICMG 3.0 well as through direct connection to 10GbE and 1GbE ports on the front or rear (dual redundant 1GbE) depending on a customer’s specific cabling requirements. n Fabric interface compliant to PICMG 3.1, option 9 (10GbE) n 2 x 10GbE front panel network ® Coupled with Continuous Computing’s FlexTCA Systems and Trillium protocol connections software, the PP50 provides the fastest path from application development n RTM with 2 x 10GbE or 10 x 1GbE to deployment revenue. From IPTV to Wireless Core Networks, the PP50 is the blade of choice for deploying a wide range of high-performance, scalable telecom applications. FlexPacket ATCA-PP50 SPECIFICATIONS CPU / mEmORy mECHANICAL & ENvIRONmENTAL COmPLIANCE n 1 or 2 RMI XLR732 processors n Standard 8U single-slot (6 HP) front board and RTM n 1GHz multi-core MIPS64, 8 multi-threaded cores (32 virtual cores) n Operating environment: n 2MB of 8-way set associative L2 cache - Temperature: 0C to +55C n 2GB, 4GB, or 8GB DDR2 memory per processor - Humidity: 5%-80% (non-condensing) - Vibration: 20Hz-2KHz random multi-axis, 0.5G RMS I/O n Storage/transportation environment: - Temperature: -40C to +85C n Dual redundant 1GbE base interface - Humidity: 5%-95% (non-condensing) n 10GbE fabric interfaces (PICMG 3.1.9) - Vibration: 20Hz-2KHz random multi-axis, 6G RMS n 2 x 10GbE on front panel n Assembly components meet UL 94-V0 flammability rating n RJ45 1GbE front panel management port PLANNED CERTIFICATIONS EXPANSION OPTIONS n UL 60950-1 Safety of Information Technology Equipment n 36Mbit or 72Mbit TCAM mezzanine using Netlogic NL71024 n IEC/EN 60950-1 Safety of Information Technology Equipment n Optional 1Gb or 2Gb CompactFlash per processor n FCC Part 15, Subpart B, Class A n Rear Transition Module n CE Mark - Meets EMC directive 89/336/EEC - 2 x 10GbE (SFP+) n Designed for Telcordia NEBS GR-63-CORE and GR-1089-CORE Level 3 - 10 x 1GbE (SFP) n RoHS 6 / 6 Compliant SOFTWARE n Wind River Linux PNE (Carrier-Grade Linux) n RMI Operating System (Native C-based OS for fast path) n Network and routing protocols including fast path and slow path functions - Includes IPv4/6 forwarding, IPSEC, Tunneling, GRE, etc. FLEXPACKET ATCA-PP50 BLOCK DIAGRAm (ETHERNET CONNECTIvITy) MDIO RGMII 10/100/ XAUI XLR732 RJ45 PHY 1000BT PHY XGMII RTM LA-1 2x 10GE XAUI HT HT I2C Mezzanine 10 x 1GE 1000Base-X SFP+ XAUI - 10Gbps Ethernet SFI SFP+ PHY 10GE Switch Fabric A SFP+ 10GE I2C Fabric Fabric B TCAM Mezzanine 2x 2x 1GE 1000Base-X SGMII Base A GE SW Base Base B 2x 1GE 1000Base-X LA-1 MII RGMII IPMB A NIC IPMC 10/100/ XLR732 IPMB B PHY PHY RJ45 1000BT Serial-over-LAN XAUI Global Headquarters Continuous Computing ©2008 Continuous Computing Corporation. 9450 Carroll Park Drive San Diego, CA 92121 USA Continuous Computing, the Continuous Computing logo, Create | Deploy | Converge, Flex21, FlexChassis, T +1.858.882.8800 FlexCompute, FlexCore, FlexDSP, FlexPacket, FlexStore, FlexSwitch, FlexTCA, Network Service-Ready F +1.858.777.3388 Platform, Quick!Start, TAPA, Trillium, Trillium+plus, and the Trillium logo are trademarks or registered trademarks of Continuous Computing Corporation. info@ccpu.com www.ccpu.com Other names and brands may be claimed as the property of others. MC00134-04 0508/KW/BP/EC XGMI XGMI PHY