MODELS 2340 & 2370 Universal Fiber Optic Modems For all branches of the Military, Government agencies, commercial and government system integrators, public and private network administrators who need to extend standards based serial data over Ţ ber optic cable, Canoga Perkins 2300 Series Fiber Optic Modems combine SNMP management with versatile and cost 4 effective solutions for all your commercial and C I asset applications. The 2300 Series Fiber Optic Modems offer all the functionality you expect. The 2340 Fiber Optic Modem operates asynchronously at speeds up to 1.5 Mbps and synchronously at speeds up to 2.048 Mbps. The 2370 Fiber Optic Modem operates asynchronously at speeds up to 15 Mbps and synchronously at speeds up to 20 Mbps. Clocking options include external, internal, and slave timing. Using a built in clock synthesizer, the 2340 and 2370 Fiber Optic Modems can generate dozens of commonly used clock rates. These include all Nx56 Kbps and Nx64 Kbps clock rates. Modular in design, the 2340 and 2370 Fiber Optic Modems support ten hot swappable, Ţ eld installable electrical interfaces. End-to-end control leads are supported for applications requiring protocol handshaking. 1310nm multimode, 1310nm single mode, and 1550nm single mode optics versions are available. Optional single Ţ ber versions are also available. ST and SC optic connectors are supported. ConŢ guration and management of the Fiber Optic Modems is accomplished locally with the built-in EIA-561 async terminal port or remotely using our advanced SideBand™ Management technology. Our multi-technology Universal Chassis System (UCS) Domain Manager provides user-friendly menus for end-to-end, non-intrusive, unit conŢ guration, status, and control. Remote FEATURES: access is available by using an external modem connected to the 2340 or 2370 terminal port or Optical Long Distance Extension of Clock and Data • through SNMP. Circuits up to 120 Km The 2340 and 2370 Fiber Optic Modems are fully Standalone and 19” Rack mount, or 23” Rack mount • redundant providing hardware and Ţ ber protection Field Interchangeable, Hot Swappable Interfaces for mission critical applications. The software • selectable redundancy feature allows one pair of Internal, External, and Slave Clocking Modes Provided • 2340s or 2370s to function as a primary link while Local and Remote Loopback Capability for another pair of 2340s or 2370s act as a secondary • Troubleshooting link. This creates a completely redundant circuit for maximum uptime. 1310nm Multimode, 1310nm Singlemode, or 1550nm • Singlemode Optics to Match Virtually Any Application Supports KIV and KG encryption product lines • End-to-End Controls Provide Handshaking • Full Redundancy for Maximum Uptime • End-To-End SideBand Management for Remote Control • World Headquarters Continuous, Non-intrusive BERT Test to Monitor the • Communications Link 20600 Prairie Street Local and Remote Terminal Port, SLIP, PPP, and SNMP Chatsworth, CA 91311-6008 • Management Phone (818) 718-6300 • Fax (818) 718-6312 E-mail: Ţ ber@canoga.com NEBS Level 3 Tested and CertiŢ ed • MODELS 2340 & 2370 Universal Fiber Optic Modems SPECIFICATIONS DIAGNOSTIC LEDs OPERATING ENVIRONMENT • • Modem Status (STA), ConŢ guration (CFG) Temperature Composite Loss of Sync (CLS), Test/Loopback (TST) 0˚ to 50˚ C (32˚ to 122˚ F) Humidity FRONT PANEL SWITCHES • Up to 90% (Non-condensing) Recessed Reset Modem (MDM) and Terminal (TRM) Crossover on REDUNDANCY • EIA-561 Port Full Redundancy DIMENSIONS PERFORMANCE • • -10 Rackmount Module 10 or Better 7.9” H x 1.0” W x 10.5” D (201mm x 25mm x 267mm) DATA RATES • Weight 2340 Fiber Optic Modem 1.2 Lbs. (0.45 kg) 50 bps to 1.544 Mbps Asynchronous Power 50 bps to 2.048 Mbps Synchronous 5 Watts Maximum 2370 Fiber Optic Modem 50 bps to 15 Mbps Asynchronous ENCLOSURES • 50 bps to 20 Mbps Synchronous Rack Mount UCS 1000 Chassis ELECTRICAL INTERFACE MODULES (PARTIAL LIST) • 8.75” H x 19” W x 11.75 D” L130: Software Selectable EIA-232/423, (222mm x 482mm x 298mm) EIA-530, RS-422, V.35, Programmable AC Power Buffered EIA-530 (DB-25F) 150 watts, 90-246 VAC @ 2A Max L131: EIA-422 (DC-37F) 50-60 Hz Input L132: EIA-422 (TwinAx) DC Power L133: TTL (BNC) 150 watts, -36 to –58 VDC @ 4W Max L138: EIA-422, High-speed Clock & Data Only to Input 20Mbps (DC-37F) Weight L139: MIL 188-114A (Five Connector TwinAx) 12 Lbs. (5.5 Kg) OPTICAL INTERFACE UCS 1001 Chassis • 1310nm Multimode 1.72” H x 17.5” W x 14” D 1310nm or 1550nm Singlemode (44mm x 445mm x 356mm) SC and ST Connectors AC Power 24W, 85-270 VAC, 0.6/0.2A, 50-60 Hz OPTICAL LOSS BUDGETS • Input 1310nm MM Low Power Laser 11 dB DC Power 1310nm SM Low Power Laser 10 dB 24W, -48 VDC, 0.75A Input 1310nm SM High Power Laser 26 dB Weight 1550nm SM High Power Laser 30 dB 4.3 Lbs. (1.9 Kg) Standalone REGULATORY COMPLIANCE • 1040/1050 Enclosure ETL, cETL (UL 60950, CAN/CSA C22.2 1.72” H x 12.0” W x 11.7” D No. 60950, EN/IEC 60950) (44mm x 305mm x 297mm) IEC 60825-1 AC Power FCC Part 15B/IC CS-003/VCCI Class A 14w, 115 to 230 VAC, 0.3A, 50-60 Hz C-Tick (AS/NZS 3548) Weight EN 55024 5.6 Lbs. (2.52 Kg) R&TTE Directive (EN 300 386) World Headquarters 20600 Prairie Street Chatsworth, CA 91311-6008 Phone (818) 718-6300 • Fax (818) 718-6312 ISO 9001 Registered www.canoga.com E-mail: Ţ ber@canoga.com 6053150 Rev A SpeciŢ cations are subject to change without notice. The trademarks, service marks, and logos (”Marks”) displayed herein are the property of Canoga Perkins Corporation or other third parties.These Marks may not be used without the prior written consent of Canoga Perkins Corporation or a third party, which may own the Mark. Copyright© Canoga Perkins Corporation 2005. All rights reserved.