CANOGA PERKINS 2345-1100
Specifications
DC Power
38 VDC to 72 VDC, 9.1W Max.
DIAGNOSTIC LEDs
STA System Status, CFG Modem Configuration Error, CLS Loss of Optical Signal, TST Test/Loopback Status, LOS Loss of T-3/DS-3 Sync, SQL Optical Signal Quality, AIS All 1s Received, Unframed
Dimensions
UCS Module 7.9” H x 1.0” W x 10.5” D (201mm x 25mm x 267mm), Standalone Model
Extension Port (Fiber)
SC, ST
FRONT PANEL SWITCHES
RST Modem and Management Reset
Humidity
10% to 90% RH (non-condensing)
Rack Mount
UCS 1000, UCS 1001
Standalone
AC Power 100 to 240 VAC, 50/60 Hz Auto-ranging, 10W Max.
Standalone Model (2345-1100 or -1400) Model 1040, Model 1050
T-3 Port
BNC
Temperature
0° to +50°C (32° to 122° F)
UCS Rackmount
10W Max.
Weight
UCS Module 1.2 lb (0.54 kg), Standalone Model 3.2 lb. (1.45 kg)
Features
- B3Z5 and AMI Line Coding Supported
- C-Bit, M13 and Transparent Framing Formats
- Continuous, Non-intrusive BERT to Monitor Optical Link Performance
- End-To-End SideBand Management for Remote Management and Monitoring
- Full Optical and Hardware Redundancy for Maximum Uptime
- Local and Remote Terminal Port, PPP, Telnet and SNMP Management
- NEBS Level 3 Tested and Certified
- Optically Extend T-3/DS-3 up to 50 Km
- Performance Monitoring Per ITU-G.826 and RFC2496
- Single Mode and Multimode Fiber Support
- Transparent Framing Passes FM and FEAC Overhead Bits
Datasheet
Extracted Text
T-3 Fiber Optic Modem The EdgeAccess® Model 2345 is an SNMP managed multi-featured fiber optic modem that optically extends T-3/DS-3 (44.736Mbps) over single mode or multimode fiber optic cable. It is designed to enable Service Providers, Carriers, Government, Military and Corporate Enterprise to expand the capabilities of their existing data communications infrastructure. The 2345 transports any B3ZS coded, framed data stream and provides a transparent link extension when transporting C-bit Parity and M13 framed signals. It is available as a standalone modem and as a rack mount UCS 1000 card with modular, hot-swappable, and interchangeable Optical Line Interface Modules (OLIM). The rack mounted card is part of the Universal Chassis System (UCS). SNMP support is available for both the rack mount and the standalone versions with end-to-end monitoring and configuration facilitated via the SideBand Management Channel. The network manager gathers statistics and link information from the remote end. Software upgrades are easy with local and remote downloads of code. To reduce critical circuit downtime, fiber path and full hardware modem redundancy options are supported. With each option, failure in the primary causes an automatic switchover to the secondary fiber link FEATURES: modem. • Optically Extend T-3/DS-3 up to 50 Km • Single Mode and Multimode Fiber Support The 2345 is ideal for extending T-3 from the SONET • Performance Monitoring Per ITU-G.826 and Node / Network Core to the customer demarcation RFC2496 point, as well as extending interconnection between T- 3 devices like M13 Multiplexers and LAN Routers. For • B3Z5 and AMI Line Coding Supported applications requiring multiple modems, up to 15 2345 • C-Bit, M13 and Transparent Framing Formats Modems are mountable in a UCS1000 Chassis with up • Transparent Framing Passes FM and FEAC to 240 modems managed from a single UCS Domain Overhead Bits and IP Address. • Full Optical and Hardware Redundancy for Maximum Uptime • End-To-End SideBand Management for Remote Management and Monitoring • Continuous, Non-intrusive BERT to Monitor Optical Link Performance • Local and Remote Terminal Port, PPP, Telnet World Headquarters and SNMP Management 20600 Prairie Street Chatsworth, CA 91311-6008 • NEBS Level 3 Tested and Certified Phone (818) 718-6300 • Fax (818) 718-6312 E-mail: fiber@canoga.com T-3 Fiber Optic Modem Specifications PHYSICAL FRONT PANEL SWITCHES • • Dimensions RST Modem and Management Reset UCS Module 7.9” H x 1.0” W x 10.5” D DIAGNOSTIC LEDs • (201mm x 25mm x 267mm) STA System Status Standalone Model CFG Modem Configuration Error 1.7" H x 8.5" W x 11.5” D CLS Loss of Optical Signal (43mm x 216mm x 292mm) TST Test/Loopback Status Weight LOS Loss of T-3/DS-3 Sync UCS Module SQL Optical Signal Quality 1.2 lb (0.54 kg) AIS All 1s Received, Unframed Standalone Model 3.2 lb. (1.45 kg) MANAGEMENT • SNMPv1, SNMPv2c and SNMPv3, In-band ENCLOSURES • Serial EIA-232-E Direct Terminal Rack Mount CanogaView Smart Element Manager UCS 1000 Telnet, PPP UCS 1001 Standalone OPTICAL DISTANCES Standalone Model (2345-1100 or -1400) • Model 1040 2345 1310nm MM/SM Optic Model 1050 Single Mode Fiber Multimode Fiber OPERATING ENVIRONMENT • 10 20 30 40 50 60 70 80 90 100 110 120 Temperature Kilometers 0° to +50°C (32° to 122° F) These are typical distances on SMF-26 fiber. Actual distance is dependant on fiber type, condition and configuration. Humidity 10% to 90% RH (non-condensing) Please contact your Canoga Perkins’ sales representative for current Fixed and SFP Optics offerings. POWER • REGULATORY COMPLIANCE UCS Rackmount • ETL, ETLc (UL 60950 CAN/CSA C.22 No. 60950, 10W Max. EN/IEC 60950) Standalone IEC 60825-1 AC Power FCC Part 15B/ICES-003/VCCI Class A 100 to 240 VAC, 50/60 Hz Auto-ranging C-Tick (AS/NZS 3548) 10W Max. EN 55022 Class A, EN 55024 DC Power EN 61000-3-2, EN 61000-3-3 38 VDC to 72 VDC NEBS Level 3 9.1W Max. CE Mark INTERFACE CONNECTORS • Extension Port (Fiber) SC ST T-3 Port BNC World Headquarters 20600 Prairie Street Chatsworth, CA 91311-6008 TL9000 Registered Phone (818) 718-6300 • Fax (818) 718-6312 6052471 Rev D E-mail: fiber@canoga.com www.canoga.com Specifications are subject to change without notice. The trademarks, service marks, and logos (”Marks”) displayed herein are the property of Canoga Perkins Corporation or other third parties. These Marks may not be used without the prior written consent of Canoga Perkins Corporation or a third party, which may own the Mark. Copyright© Canoga Perkins Corporation 2010. All rights reserved.
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the 2345-1100 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

Canoga Perkins 2262-S-01-11-1 Connector - 1310nm, SM, 20dB, Laser, ST 1.544 Mbps T1 with DA15 and R...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods