MODEL 2270 High Performance Fiber Optic Modem The Model 2270 is ideal for modern cryptographic and satellite downlink applications. It features data through-put speeds up to 20Mbps with selected interfaces, and handles rate-agile applications from 56kbps to 20Mbps. It operates synchronously up to 20Mbps, or asynchronously up to 5Mbps. The 2270 is available with 850nm multimode optics and 1310nm single mode optics, for distances up to 45km. The 2270 operates with a large variety of Ţ eld interchangeable interfaces, such as V.35 and RS- 422. It functions with different interfaces at each end, eliminating the need for equipment interface commonality. Checking the integrity of both the electrical and optical links can be done with a ţ ip of the System Test which allows local and remote loopback diagnostics that assists in the isolation and troubleshooting of faults. For installations that require multiple modems, the Model 2201 Rack Assembly holds up to ten 2200 series modems. Standard features of the 2201 Chassis include audio, visual and dry contact alarms in the event of power supply failure. Redundant power is available as an optional feature. FEATURES: Rate-agile Sync Speeds Up to 20Mbps • Interchangeable Interfaces • System Test, Local/Remote Loopback • Internal/External/Slave Clock Modes • Single and Multimode Fiber • 850nm and 1310nm Optics • Standalone and Rackmount Options • Redundant Power Supplies • World Headquarters (Optional in 2201 Rack Assembly) 20600 Prairie Street Chatsworth, CA 91311-6008 120VAC and 240VAC (In 2201 Rack) • Phone (818) 718-6300 • Fax (818) 718-6312 E-mail: Ţ ber@canoga.com MODEL 2270 High Performance Fiber Optic Modem SPECIFICATIONS DIAGNOSTIC LEDS LOSS BUDGET (Typical loss budgets at 2dB or greater) • • Loopback On, Power On 1310nm Laser SMF High Power 15dB Optical Interface (Rx and Tx) 1310nm Laser SMF Low Power 10dB Data Interface (Rx and Tx) 850nm LED MMF 6dB PHYSICAL DISTANCE GUIDE • • Dimensions Standalone 2.5”H x 8.5”W x 12.8”D (64 x 216 x 325mm) Rackmount Card 7.8”H x 1.06”W x 12.5”D 1310nm Laser HP - SMF (198 x 27 x 318mm) Weight 1310nm Laser LP - SMF Standalone 3.6 lb (1.63kg) Rackmount Card 0.9 lb (0.40kg) 850nm LED - MMF POWER • 120/240VAC, 47 to 63Hz, 25W Max. OPERATING ENVIRONMENT 0 5 10 15 20 25 30 35 40 50 • Temperature 0˚ to 50˚C Kilometers Humidity Up to 95% (Noncondensing) Note: These are typical distances which can be achieved depending on the quality of the Ţ ber cable plant. PERFORMANCE • 11 Composite Error Rate ≥10 or Better Bit Count Integrity 1 Event in 1,400 Hours REGULATORY COMPLIANCE (Standalone Unit) or Better • UL 60950/CSA C22.2 No. 60950 FCC Part 15 Class A OPTICAL INTERFACE • Transmitter 850nm LED or 1310nm Laser Connectors ST or FC/PC DATA INTERFACE (Partial list) Connector • V.35 MRC34 (Female) EIA-422/449 (Standard) DC-37 (Female) EIA-422 High-Speed (SCTE and SCT) TwinAx (BJ-77) EIA-530 P53 Buffered Interface DB-25 (Female) World Headquarters 20600 Prairie Street Chatsworth, CA 91311-6008 Phone (818) 718-6300 • Fax (818) 718-6312 ISO 9001 Registered www.canoga.com E-mail: Ţ ber@canoga.com 6050321 Rev E SpeciŢ cations are subject to change without notice. The trademarks, service marks, and logos (”Marks”) displayed herein are the property of Canoga Perkins Corporation or other third parties.These Marks may not be used without the prior written consent of Canoga Perkins Corporation or a third party, which may own the Mark. Copyright© Canoga Perkins Corporation 2005. All rights reserved.