Toggle C&K 7000 Series Miniature Toggle Switches Features/Benefits Typical Applications • Multi-pole and multi-position • Telecommunications • Wide variety of actuator and • Instrumentation termination options • Medical equipment • Epoxy sealed terminals prevent contamination during soldering Models Available Specifications CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level. DC max. Q contact material: 5 AMPS @ 120 V AC or 28 V DC; OPERATING TEMPERATURE: –30ºC to 85ºC. 2 AMPS @ 250 V AC. See page F-16 for additional ratings. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E ELECTRICAL LIFE: 7X01 and UX1 models: 100,000 make-and-break method 9 (1 hour steam aging). cycles at full load. All other models: 40,000 cycles. For materials see page F-4. CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. NOTE: Specifications listed above are for switches with standard options. For information 9 on specific and custom switches, consult Customer Service Center. INSULATION RESISTANCE: 10 Ω min. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages F-4 thru F-16. For additional options not shown in catalog, consult our Customer Service Center. Switch Function Bushing 7101 (STD.) SP On-None-On D (STD.) .280 high, keyway Contact Material Actuator B (STD.) Gold 7103 (STD.) SP On-Off-On H (STD.) .296 high, flat M (STD.) .200" high Q (STD.) Silver Seal 7105 SP Mom.-Off-Mom. Y (STD.).350 high, keyway P3 (STD.) Flatted, anti-rotation, K Gold, tin-lead E (STD.) Epoxy 7107 SP On-Off-Mom. NONE No bushing .450" high M Silver, tin-lead I Epoxy potted 7108 SP On-None-Mom. choice required S (STD.) .420" high G Gold over silver base 7109 SP None-On-Mom. CW Splashproof T (STD.) .687" high, 15/32 bushing L Gold over silver, tin-lead 7201 (STD.) DP On-None-On D8 .280" high, flat K2 Locking lever, .704" high 7203 (STD.) DP On-Off-On D9 .280" high, keyway Actuator Color/Finish K9 Locking lever, .704" high 7205 DP Mom.-Off-Mom. H3 .315" high, keyway NONE (STD.) Bright chrome K12 Locking lever, .732" high 7207 DP On-Off-Mom. H4 8mm high, keyway 0 (STD) Actuator finish K19 Locking lever, .732" high 7208 DP On-None-Mom. Y1 .378" high, keyway with black bushing L .840" high 7211 (STD.) DP On-On-On Y3 8.9mm high, keyway 1 White L1 .640" high 7213 DP On-On-Mom. Y4 .378" high, flat 2 Black L1P Anti-rotation, .640" high 7215 DP Mom.-On-Mom. Y9 .350" high, keyway 3 Red L2 .550" high 7301 (STD.) 3P On-None-On S Satin chrome L2P Anti-rotation, .550" high Terminations 7303 3P On-Off-On KXX Actuator Color/Finish L3 Plastic, .840" high A (STD.) Right angle, PC thru-hole 7305 3P Mom.-Off-Mom. NONE (STD.) Natural aluminum L3P Plastic, anti-rotation, AV2 (STD.) Vert. right angle, PC thru-hole 7307 3P On-Off-Mom. 0 (STD) Natural aluminum .840" high C (STD.) PC Thru-hole 7308 3P On-None-Mom. with black bushing L40 Lever handle without cap V3 (STD.) .460 high, V-bracket 7401 (STD.) 4P On-None-On 2 Black anodized aluminum L41 .531" high lever handle with cap Z (STD.) Solder lug 7403 4P On-Off-On 3 Red anodized aluminum L42 .838" high lever handle with cap A2 Right angle, PC thru-hole 7405 4P Mom.-Off-Mom. 7 Blue anodized aluminum MP Anti-rotation, .200" high A3 Right angle, PC thru-hole 7407 4P On-Off-Mom. Bushing Finish P1 Flatted, anti-rotation, A4 Right angle, PC thru-hole 7408 4P On-None-Mom. NONE (STD.) Nickel on all .840" high AV3 Vert. right angle, PC thru-hole 7411 4P On-On-On bushings (except D8, P4 Flatted, anti-rotation, AW1 Right angle, extended, PC thru-hole 7413 4P On-On-Mom. satin chrome) .250" high AW3 Right angle, extended, PC thru-hole F 7415 4P Mom.-On-Mom. SP Anti-rotation, .420" high 2 Black AW4 Right angle, extended, PC thru-hole Note: UL/CSA models available, T1 .487" high, 15/32 bushing V2 .555" high, V-bracket V61 .460" high, snap-in V-bracket see pages F-4 & F-5. T1P Anti-rotation, .487" high, V4 .630" high, V-bracket V71 .630" high, snap-in V-bracket 15/32 bushing V6 .460" high, V-bracket V81 .953" high, snap-in V-bracket T2P Flatted, anti-rotation, V7 .630" high, V-bracket W .750" long, wire wrap .610” high, 15/32 bushing, V8 .953" high, V-bracket W1 .964" long, wire wrap TP Anti-rotation, .687" high, V9 1.150" high, V-bracket W3 .425" long, wire wrap 15/32 bushing V21 .555" high, snap-in V-bracket W4 1.062" long, wire wrap V31 .460" high, snap-in V-bracket W5 1.305" long, wire wrap V41 .630" high, snap-in V-bracket Z3 Quick connect Dimensions are shown: IN (mm) Dimensions subject to change www.ittcannon.com F-3 C&K 7000 Series Miniature Toggle Switches Materials CASE: Glass filled nylon 6/6, flame retardant, heat stabilized, or CENTER CONTACTS & ALL TERMINALS: B contact material: Copper diallyl phthalate (DAP) (UL 94V-0). alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See above for additional contact materials. ACTUATOR: Brass, chrome plated. TERMINAL SEAL: Epoxy. BUSHING: Brass or zinc, nickel plated. HARDWARE: Nut & Locking Ring: Brass, nickel plated. HOUSING: Stainless steel. Lockwasher: Steel, nickel plated. SWITCH SUPPORT: Brass or steel, tin plated. NOTE: Materials listed above are for switches with standard options. For information END CONTACTS: B contact material: Copper alloy, with gold plate on specific and custom switches, consult Customer Service Center. over nickel plate. Q contact material: Coin silver, silver plated. See page F-16 for additional contact materials. SWITCH FUNCTION SWITCH FUNCTION CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 POS. 1 POS. 2 POS. 3 UL/CSA** NO. MODEL POLES MODEL NO. NO. SCHEMATIC 7101 (STD.) U11 ON NONE ON 2-3 N/A 2-1 7103 (STD.) U13 ON OFF ON 7105 U15 MOM. OFF MOM. 2-3 OPEN 2-1 SP 7107 U17 ON OFF MOM. 7108 U18 ON NONE MOM. 2-3 N/A 2-1 7109 U19 NONE ON MOM. N/A 2-3 2-1 SPDT SPDT 1/4-40 UNS-2A KEYWAY Terminal Numbers For Reference Only Part number shown: 7101SYZBE 7201 (STD.) U21 ON NONE ON 2-3,5-6 N/A 2-1,5-4 7203 (STD.) U23 ON OFF ON 7205 U25 MOM. OFF MOM. 2-3,5-6 OPEN 2-1,5-4 7207 U27 ON OFF MOM. DP 7208 U28 ON NONE MOM. 2-3,5-6 N/A 2-1,5-4 7211 (STD.)* U211* ON ON ON 7213* U213* ON ON MOM. 2-3,5-6 2-3,5-4 2-1,5-4 DPDT 7215* U215* MOM. ON MOM. DPDT 1/4-40 UNS-2A KEYWAY F Terminal Numbers For Reference Only Part number shown: 7201SYZQE MOM. = Momentary ** U11–U415 model nos. with all options when ordered with G, L, M or Q contact material. * Wiring for 3-way switch, see Section N. Third Angle Projection Dimensions are shown: IN (mm) Dimensions subject to change www.ittcannon.com F-4 Toggle Toggle C&K 7000 Series Miniature Toggle Switches SWITCH FUNCTION SWITCH FUNCTION CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 POS. 1 POS. 2 POS. 3 UL/CSA** NO. MODEL POLES MODEL NO. NO. SCHEMATIC 7301 (STD.) U31 ON NONE ON 2-3,5-6,8-9 N/A 2-1,5-4,8-7 7303 U33 ON OFF ON 3P 7305 U35 MOM. OFF MOM. 2-3,5-6,8-9 OPEN 2-1,5-4,8-7 7307 U37 ON OFF MOM. 3PDT 7308 U38 ON NONE MOM. 2-3,5-6,8-9 N/A 2-1,5-4,8-7 3PDT 1/4-40 UNS-2A KEYWAY Terminal Numbers For Reference Only Part number shown: 7301SYZQE 7401 (STD.) U41 ON NONE ON 2-3,5-6,8-9,11-12 N/A 2-1,5-4,8-7,11-10 7403 U43 ON OFF ON 7405 U45 MOM. OFF MOM. 2-3,5-6,8-9,11-12 OPEN 2-1,5-4,8-7,11-10 7407 U47 ON OFF MOM. 4P 7408 U48 ON NONE MOM. 2-3,5-6,8-9,11-12 N/A 2-1,5-4,8-7,11-10 7411* U411* ON ON ON 7413* U413* ON ON MOM. 2-3,5-6,8-9,11-12 2-3,5-4,8-9,11-10 2-1,5-4,8-7,11-10 4PDT 7415* U415* MOM. ON MOM. 4PDT 1/4-40 UNS-2A KEYWAY Terminal Numbers For Reference Only Part number shown: 7401SYZQE MOM. = Momentary ** U11–U415 model nos. with all options when ordered with G, L, M or Q contact material. * Wiring for 3-way switch, see Section N. F Third Angle Projection Dimensions are shown: IN (mm) Dimensions subject to change www.ittcannon.com F-5 C&K 7000 Series Miniature Toggle Switches ACTUATOR FINISH ACTUATOR ACTUATOR 1 1 1 S (STD.) .420" HIGH M (STD.) .200" HIGH L, L1, L2 .840", .640", .550" HIGH 2,3 2,3 SP ANTIROTATION, .420" HIGH MP ANTIROTATION, .200" HIGH L1P, L2P ANTIROTATION, 2,3 .840", .640", .550" HIGH OPTION * CODE DIM ‘A’ *DIM. ‘A’ * L .840 (21,34) L1, L1P .640 (16,26) L2, L2P .550 (13,97) S actuator standard when ordered with M actuator standard when ordered with C, W-W5, Z & Z3 terminations. all terminations except C, W-W5, Z & Z3. Caps are available separately, see page F-16. Caps are available separately, see page F-16. Caps are available separately, see page F-16. 2,3 2,3 P1 FLATTED WITH ANTIROTATION, .840" HIGH P3 (STD.) FLATTED WITH ANTIROTATION, P4 FLATTED WITH ANTIROTATION, .250" HIGH 2,3 .450" HIGH * * * Dress nut part number 709901201 supplied standard with threaded bushing. (Part number 709903201 with metric threaded bushings.) 1,2 1,2 T (STD.) .687" HIGH T1 .487" HIGH T2P FLATTED, ANTIROTATION, .610" HIGH, 1,2,3 15/32 BUSHING TP ANTIROTATION, .687" HIGH, T1P ANTIROTATION, .487" HIGH, 1,2,3 1,2,3 15/32 BUSHING 15/32 BUSHING 15/32-32 UNS-2A 15/32-32 UNS-2A 15/32-32 UNS-2A Bushing option code not required unless CW splashproof bushing ordered. TP & T1P Bushing option code not required. T2P actuator not available actuators not available with CW splashproof bushing. All TXX actuators not available on with CW splashproof bushing or single pole models with single pole models with A-A7, AW-AW4, R terminations. A-A7, AW-AW4, R terminations. F 1 NOTE: Black hardware is supplied when either L, L1, L2, M, S & TXX actuators not available OPTION black actuators or bushings are specified. For with Y1 bushing. CODE ACTUATOR FINISH additional hardware, see section N. 2 L1P, L2P, MP, P1, P3, P4, SP & TXX actuators not NONE (STD.) BRIGHT CHROME-With Nickle Plated Bushing available with D8 & H4 bushing. 3 Antirotation: Provides anti-‘push-in’ feature on 2 (STD.) BLACK actuator. 0 BRIGHT CHROME-With Black Bushing * Add .070 (1,78) for D, D8 & D9 bushings, subtract .020 (0,51) for H3 bushing. S SATIN CHROME Third Angle Projection Dimensions are shown: IN (mm) Dimensions subject to change www.ittcannon.com F-6 Toggle Toggle C&K 7000 Series Miniature Toggle Switches ACTUATOR FINISH/COLOR ACTUATOR ACTUATOR K2 LOCKING LEVER, .704" HIGH K12 LOCKING LEVER, .732" HIGH (threaded) (threaded) K9 LOCKING LEVER, .704" HIGH K19 LOCKING LEVER, .732" HIGH (unthreaded) (unthreaded) OPTION CODE ACTUATOR CAP FINISH NONE (STD.) NATURAL ALUMINUM–With Nickle Plated Bushing 0 (STD.) NATURAL ALUMINUM–With Black Bushing 2 BLACK ANODIZED ALUMINUM 3 RED ANODIZED ALUMINUM 7 BLUE ANODIZED ALUMINUM Replaces K1, K18 Replaces K, K8 Locking Positions NOTE: To prevent accidental actuation, toggle must be lifted before being actuated. When released, toggle will lock in place. Overtightening mounting nut may cause actuator to bind. Locking levers supplied with bushing shown. Bushing option code not required unless CW splashproof –01 Models –03 & –11 Models –05, –09 & –15 Models –07 & –13 Models –08 Models bushing ordered. 2 Position lock 3 Position lock 1 Position lock 2 Position lock 1 Position lock L40 LEVER HANDLE WITHOUT CAP L41 PLASTIC LEVER HANDLE WITH L42 PLASTIC LEVER HANDLE WITH ANTIROTATION AND CAP, P/N 4810 ANTIROTATION AND CAP, P/N 4811 Finish: Matte (L41 & L42). No color choice required. L3 PLASTIC, .840" HIGH L3P ANTIROTATION, .840" HIGH OPTION PLASTIC ACTUATOR CODE COLORS F Gloss Plastic NONE (STD.) No Actuator Color (L40 option) * 2 (STD.) BLACK 1 WHITE Chrome Finish 3 RED NOTE: Lever handle for L41 & L42 actuators supplied, but not installed. For interchangeability, order L40 actuator option and lever handles separately, see page F-17. L4X actuators not available with H4, Y1, Y4 bushings. Antirotation: Provides anti-‘push-in’ feature on actuator. * Add .070 (1,78) for D, D8 & D9 bushings, subtract .020 (0,51) for H3 bushing. Third Angle Projection Dimensions are shown: IN (mm) Dimensions subject to change www.ittcannon.com F-7 C&K 7000 Series Miniature Toggle Switches BUSHING FINISH BUSHING BUSHING Y (STD.) .350" HIGH, NONE NO BUSHING D (STD.) .280" HIGH, H (STD.) .296" HIGH, FLAT H3 .315" HIGH, KEYWAY 1,2 THREADED, KEYWAY THREADED, KEYWAY THREADED, HIGH TORQUE THREADED, HIGH 1,2 TORQUE Y9 .350" HIGH, D8 .280" HIGH, UNTHREADED, 3 UNTHREADED, FLAT KEYWAY D9 .280" HIGH, UNTHREADED, KEYWAY No bushing choice required with KXX, TXX actuators. (exception: Specify CW if splashproof bushing desired). D8 D, D9 1/4-40 UNS-2A 1/4-40 UNS-2A 1/4-40 UNS-2A 1/4-40 UNS-2A D9 bushing standard with all terminations Y bushing standard with C, Subtract .020 (0,51) from all actuator except C, W-W5, Z or Z3. Add .070 (1,78) to W-W5, Z or Z3 terminations. all actuators lengths with D, D8 & D9 bushings. lengths for H3 bushing. H4 8mm HIGH, KEYWAY, THREADED, Y1 .378" HIGH, KEYWAY, THREADED, Y3 8.9mm HIGH, KEYWAY, Y4 .378" HIGH, FLAT, THREADED, 1,2,3 1,2,4 1,2,5 METRIC HIGH TORQUE HIGH TORQUE THREADED, METRIC HIGH TORQUE 1/4-40 UNS-2A 1/4-40 UNS-2A 1,2 CW THREADED, SPLASHPROOF For T & T1 actuators. For actuators other than T & T1. OPTION CODE BUSHING FINISH (STD.) NICKEL on all bushings NONE except ‘D8’ satin chrome. 2 BLACK 15/32-32 UNS-2A 1/4-40 UNS-2A 1 Will withstand 12 in.-lbs. of torque with no distortion. 2 CW. H, H3, H4, Y1 & Y4 bushings not available on single pole models with A4, R terminations. 3 D8 & H4 bushings available only with L, L1, L2, L3, M & S actuators. 4 Y1 bushing available only with LP, LXP, MP, PX & SP actuators. IP67 Degree of protection, totally protected against 5 Y4 bushing not available with L4X actuators. dust, full-scale voltage protection, temporary immersion. Internal actuator seal standard. External bushing seal IP67 Degree of protection, totally protected NOTE: Two mounting nuts, locking ring and lockwasher supplied standard with washer available separately, order from: against dust, full-scale voltage protection, threaded bushings. Black hardware is supplied when either black bushings or Multi-Flex Seals, Inc., Hackensack, NJ. temporary immersion. Internal actuator seal actuators are specified. Optional mounting nut and locking ring styles and finishes Part number: MFS-60064. and external bushing seal washer standard. available, see section N. PANEL MOUNTING 1/4 INCH BUSHING METRIC BUSHING 15/32 INCH BUSHING F Without locking ring. With standard locking ring. With small locking ring. Without locking ring. With locking ring. Without locking ring. With standard locking ring. Third Angle Projection Dimensions are shown: IN (mm) Dimensions subject to change www.ittcannon.com F-8 Toggle Toggle C&K 7000 Series Miniature Toggle Switches TERMINATIONS Z (STD.) SOLDER LUG C (STD.) PC THRU-HOLE PC MOUNTING .030 (0,76) Thk. Not available with K, L or M contact materials. SPDT thru 4PDT SPDT thru 4PDT Z3 QUICK CONNECT W, W1, W3, W4, W5 WIRE WRAP OPTION CODE DIM ‘A’ Dim 'A' W .750 (19,05) W1 .964 (24,48) W3 .425 (10,80) W4 1.062 (26,97) .030 (0,76) Thk. W5 1.305 (33,15) .030 (0,76) Thk. Not available with K, L or M contact materials. Mating quick connector available, order part SPDT thru 4PDT SPDT thru 4PDT number 530100000, page F-17. A (STD.) RIGHT ANGLE, PC THRU-HOLE Actuator Shown 7101MD9ABE In Pos. 1 SECTION A-A Horizontal Actuation Terminal Nos. SPDT For Reference Only Switch support with CW, H, H3, H4, Y1, Y4 bushings and KXX actuators. Part No. Shown: 7101MHABE A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE AW1, AW3, AW4 RIGHT ANGLE, EXTENDED, PC THRU-HOLE PC MOUNTING F OPTION CODE DIM ‘A’ AW1 .72 (18,3) Dim 'A' AW3 .20 (5,1) AW4 .83 (21,1) Not available with I seal option. Terminal bend radii and lead-in manufacturing option. Third Angle Projection Dimensions are shown: IN (mm) Dimensions subject to change www.ittcannon.com F-9 C&K 7000 Series Miniature Toggle Switches TERMINATIONS A (STD.) RIGHT ANGLE, PC THRU-HOLE 7201MD9ABE Actuator Shown Terminals & In Pos. 1 SECTION A-A Horizontal Actuation Support DPDT A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE AW1, AW4 RIGHT ANGLE, EXTENDED, PC THRU-HOLE PC MOUNTING OPTION CODE DIM ‘A’ AW1 .40 (10,2) DIM 'A' AW4 .50 (12,7) .33 (8,4) Not available with I seal option. Terminal bend radii and lead-in manufacturing option. A (STD.) RIGHT ANGLE, PC THRU-HOLE 7301MD9ABE Terminals & Horizontal Actuation Actuator Shown SECTION A-A Support In Pos. 1 3PDT AW4 RIGHT ANGLE, EXTENDED, PC THRU-HOLE PC MOUNTING F .18 (4,6) .33 TYP. (8,4) Not available with I seal option. Terminal bend radii and lead-in manufacturing option. Third Angle Projection Dimensions are shown: IN (mm) Dimensions subject to change www.ittcannon.com F-10 Toggle Toggle C&K 7000 Series Miniature Toggle Switches TERMINATIONS A2 RIGHT ANGLE, PC THRU-HOLE, PC MOUNTING .156" PITCH 7101MHA2BE Terminals & Support Horizontal Actuation Actuator Shown In Pos. 1 SPDT Switch support with CW, H, H3, H4, Y1, Y4 bushings and KXX actuators. Not available with TXX actuators and I seal. Part No. Shown: 7101MHA2BE Terminal bend radii and lead-in manufacturing option. A4 RIGHT ANGLE, PC THRU-HOLE .156" PITCH PC MOUNTING 7101MD9A4BE Horizontal Actuation Actuator Shown In Pos. 1 SPDT Not available with KXX & TXX actuators, CW, H, H3, H4, Y1 & Y4 bushings, NOTE: The A4 option is available with any contact material and can be UL recognized and and I seal. Terminal bend radii and lead-in manufacturing option. CSA certified. The PC pattern must clear switch support legs. AV2 (STD.) VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH 7101MD9AV2BE Horizontal Actuation Actuator Shown In Pos. 1 SPDT SECTION A-A PC MOUNTING AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150" PITCH F Not available with I seal option. Terminal bend radii and lead-in manufacturing option. Third Angle Projection Dimensions are shown: IN (mm) Dimensions subject to change www.ittcannon.com F-11 C&K 7000 Series Miniature Toggle Switches TERMINATIONS AV2 (STD.) VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH 7201MD9AV2BE SECTION A-A Vertical Actuation Actuator Shown In Pos. 1 DPDT AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, PC MOUNTING .150" PITCH Not available with I seal option. Terminal bend radii and lead-in manufacturing option. AV2 (STD.) VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH 7301MD9AV2BE Vertical Actuation Actuator Shown In Pos. 1 SECTION A-A 3PDT AV3 VERTICAL RIGHT ANGLE, SNAP-IN, .150" PITCH PC MOUNTING F Not available with I seal option. Terminal bend radii and lead-in manufacturing option. Third Angle Projection Dimensions are shown: IN (mm) Dimensions subject to change www.ittcannon.com F-12 Toggle Toggle C&K 7000 Series Miniature Toggle Switches TERMINATIONS AV2 (STD.) VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH 7401MD9AV2BE Vertical Actuation 4PDT Actuator Shown In Pos. 1 SECTION A-A PC MOUNTING AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE .150" PITCH Not available with I seal option. Terminal bend radii and lead-in manufacturing option. V2, V6, V7, V8 VERTICAL MOUNT, V-BRACKET V21, V61, V71, V81 VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING Dim ‘A’ 7101MD9__BE SPDT OPTION CODE DIM ‘A’ Snap-In V2, V21 .555 (14,10) V6, V61 .460 (11,68) Actuator Shown In Pos. 1 V7, V71 .630 (16,00) V8, V81 .953 (24,21) Not available with I seal option. V2, V6, V7, V8 VERTICAL MOUNT, V-BRACKET PC MOUNTING V21, V61, V71, V81 VERTICAL MOUNT, V-BRACKET, SNAP-IN F Dim ‘A’ 7201MD9__BE OPTION Snap-In DPDT CODE DIM ‘A’ V2, V21 .555 (14,10) V6, V61 .460 (11,68) Actuator Shown In Pos. 1 V7, V71 .630 (16,00) Third Angle Not available with I seal option. Projection V8, V81 .953 (24,21) Dimensions are shown: IN (mm) Dimensions subject to change www.ittcannon.com F-13 C&K 7000 Series Miniature Toggle Switches TERMINATIONS V2, V7, V8 VERTICAL MOUNT, V-BRACKET PC MOUNTING V21, V71, V81 VERTICAL MOUNT, V-BRACKET, SNAP-IN Dim ‘A’ OPTION CODE DIM ‘A’ 7301MD9__BE Snap-In V2, V21 .555 (14,10) 3PDT V7, V71 .630 (16,00) V8, V81 .953 (24,21) Actuator Shown In Pos. 1 Not available with I seal option. PC MOUNTING V2, V7, V8 VERTICAL MOUNT, V-BRACKET V21, V71, V81 VERTICAL MOUNT, V-BRACKET, SNAP-IN Dim ‘A’ OPTION CODE DIM ‘A’ Snap-In V2, V21 .555 (14,10) 7401MD9__BE 4PDT V7, V71 .630 (16,00) Actuator Shown In Pos. 1 V8, V81 .953 (24,21) Not available with I seal option. V3 (STD.), V4, V9 VERTICAL MOUNT, V-BRACKET PC MOUNTING V31, V41 VERTICAL MOUNT, V-BRACKET, SNAP-IN Dim ‘A’ F OPTION CODE DIM ‘A’ Snap-In V3, V31 .460 (11,68) V4, V41 .630 (16,00) 7101MD9__BE V9 1.150 (29,21) SPDT Actuator Shown In Pos. 1 Third Angle Not available with I seal option. Projection Dimensions are shown: IN (mm) Dimensions subject to change www.ittcannon.com F-14 Toggle Toggle C&K 7000 Series Miniature Toggle Switches TERMINATIONS V3 (STD.), V4, V9 VERTICAL MOUNT, V-BRACKET V31, V41 VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING Dim ‘A’ 7201MD9__BE DPDT Snap-In OPTION CODE DIM ‘A’ V3, V31 .460 (11,68) Actuator Shown In Pos. 1 V4, V41 .630 (16,00) V9 1.150 (29,21) Not available with I seal option. V4, V9 VERTICAL MOUNT, V-BRACKET V41 VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING Dim ‘A’ 7301MD9__BE 3PDT OPTION CODE DIM ‘A’ Snap-In V4, V41 .630 (16,00) V9 1.150 (29,21) Actuator Shown In Pos. 1 Not available with I seal option. V4, V9 VERTICAL MOUNT, V-BRACKET PC MOUNTING V41 VERTICAL MOUNT, V-BRACKET, SNAP-IN F Dim 'A' 7401MD9__BE 4PDT Snap-In OPTION CODE DIM ‘A’ Actuator Shown In Pos. 1 V4, V41 .630 (16,00) Third Angle Not available with I seal option. V9 1.150 (29,21) Projection Dimensions are shown: IN (mm) Dimensions subject to change www.ittcannon.com F-15 C&K 7000 Series Miniature Toggle Switches CONTACT MATERIAL OPTION CONTACT TERMINAL RATINGS CODE MATERIAL PLATING 1 B (STD.) GOLD 1 GOLD LOW LEVEL/DRY CIRCUIT 0.4 VA MAX. @ 20 V AC OR DC MAX. 6 TIN-LEAD K 5 Q (STD.) SILVER 4,5 5 AMPS @ 120 V AC OR 28 V DC; 2 AMPS @ 250 V AC. SILVER POWER 6 TIN-LEAD M G 3 GOLD 0.4 VA MAX @ 20 V AC OR DC MAX OR 5 AMPS @ 120 V AC OR 2,3 LOW LEVEL/DRY CIRCUIT OR POWER GOLD OVER SILVER 28 V DC; 2 AMPS @ 250 V AC. 6 TIN-LEAD L CONTACT MATERIAL/APPLICATION RECOMMENDATIONS–SEE SECTION N. 1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. U11-U415 model numbers with all options when ordered with G, L, 2 END CONTACTS: Coin silver, with gold plate over nickel plate. M or Q contact material. 3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate B contact material standard with all terminations except C, Z & Z3. over nickel plate. B contact material standard must be ordered with A7 & R terminations. 4 END CONTACTS: Coin silver, silver plated. Q contact material standard with C, Z & Z3 terminations. 5 CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated. K, L & M contact materials not available with Z & Z3 terminations. 6 TERMINALS: Copper alloy, with tin-lead alloy over nickel plate. SEAL E (STD.) EPOXY SEAL I EPOXY POTTED BASE NO. POLES DIM ‘A’ Dim. 'A' SP .410 (10,41) DP .440 (11,18) 3P .505 (12,83) 4P .505 (12,83) Compatible with “bottom-wash” PC board cleaning methods. Available with C, W-W5, Z & Z3 terminations only. AVAILABLE HARDWARE Cap Cap Cap .312 .383 .687 (7,92) (9,73) (17,45) F PART NO. PART NO. PART NO. 896801000 WHITE 763701000 WHITE 706201000 WHITE 896802000 BLACK 763702000 BLACK 706202000 BLACK 896803000 RED 763703000 RED 706203000 RED Material: Polyethylene Material: Vinyl Material: Vinyl Finish: Matte Finish: Matte Finish: Matte Dimensions are shown: IN (mm) Dimensions subject to change www.ittcannon.com F-16 Toggle Toggle C&K 7000 Series Miniature Toggle Switches AVAILABLE HARDWARE Fits Z3 Termination L41 Lever handle L42 Lever handle female connector .477 .777 (12,12) (19,74) PART NO. PART NO. 481001000 WHITE 481101000 WHITE 481002263 BLACK 481102263 BLACK PART NO. 481003000 RED 481103000 RED 530100000 Material: Nylon Material: Nylon Finish: Matte Finish: Matte Available in loose pieces. NOTE: Additional nuts, locking rings and lockwashers available separately, see section N. Other colors available, consult Customer Service Center. F Dimensions are shown: IN (mm) Dimensions subject to change www.ittcannon.com F-17