C&K TS Series Tiny Slide Switches Features/Benefits Typical Applications • Reliable contact design ensures • Test & measurement equipment long electrical life • Computers & peripherals • Ratings up to 3 AMPS • Telecommunications & • Epoxy terminal seal—compatible networking equipment with bottom-wash cleaning Models Available Specifications Materials CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or CASE: Glass filled nylon 6/6, flame retardant, heat stabilized, I DC max. Q contact material (TS01 Model): 3 AMPS @ 120 V AC or diallyl phthalate (DAP) (UL 94V-0). or 28 V DC; (TS02, TS03 Models): 1 AMP @ 120 V AC or 28 V ACTUATOR: Nylon, black standard. DC. See page I-10 for additional ratings. HOUSING: Stainless steel or stainless steel, nickel plated. ELECTRICAL LIFE: END CONTACTS: B contact material: Copper alloy, with gold plate over TS01 MODELS: 60,000 make-and-break cycles at full load. nickel plate. Q contact material: Coin silver, silver plated. See TS02, TS03 MODELS: 30,000 cycles. page I-10 for additional contact materials. CONTACT RESISTANCE: Below 20 m Ω typ. initial @ CENTER CONTACT & ALL TERMINALS: B contact material: Copper 2-4 V DC, 100 mA, for both silver and gold plated contacts. alloy, with gold plate over nickel plate. Q contact material: Copper 9 INSULATION RESISTANCE: 10 Ω min. alloy, silver plated. See page I-10 for additional contact materials. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. TERMINAL SEAL: Epoxy OPERATING TEMPERATURE: –30ºC to 85ºC NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages I-9 and I-10. For additional options not shown in catalog, consult Customer Service Center. All models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods. Switch Function TS01 (STD.) SPDT On-None-On TS02 SPST Off-None-On TS03 SPDT On-Off-On Terminations A (STD.) Right angle, PC thru-hole (TS01 & TS03 models only) C (STD.) PC Thru-hole W Wire wrap Contact Material B (STD.) Gold Seal Q (STD.) Silver E (STD.) Epoxy K Gold, tin-lead F Epoxy seal and splashproof RTV latex rubber seal M Silver, tin-lead C Gold over silver L Gold over silver, tin-lead Dimensions are shown: IN (mm) Dimensions subject to change www.ittcannon.com I-8 Slide Slide C&K TS Series Tiny Slide Switches SWITCH FUNCTION SWITCH FUNCTION CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 POS. 1 POS. 2 POS. 3 NO. C&K marking on opposite side C&K marking on opposite side POLES MODEL NO. SCHEMATIC TS01 (STD.) ON NONE ON 1-2 OPEN 2-3 SP TS03 ON OFF ON SPDT TS02 OFF NONE ON OPEN N/A 3-1 SPST I SPDT TS02 models: Omit center terminal Terminal Nos. For Reference Only Part number shown: TS01CBE All models with all options when ordered with G, L, M or Q contact material. TS02 model not available with A terminations. TERMINATIONS C (STD.) PC THRU-HOLE W WIRE WRAP PC MOUNTING TS02 models: Omit center hole SPDT and SPST SPDT and SPST A RIGHT ANGLE, PC THRU-HOLE PC MOUNTING TS01ABE Actuator shown in pos. 1 Horizontal Actuation SPDT Not available with TS02 model. Third Angle Projection Dimensions are shown: IN (mm) Dimensions subject to change www.ittcannon.com I-9 C&K TS Series Tiny Slide Switches CONTACT MATERIAL OPTION CONTACT TERMINAL CODE MATERIAL PLATING RATINGS 1 B (STD.) GOLD 1 GOLD LOW LEVEL/DRY CIRCUIT 0.4 VA MAX. @20 V AC OR DC MAX. 6 K TIN-LEAD 5 Q (STD.) SILVER TS01 MODELS: 3 AMPS @ 120 V AC OR 28 V DC. 4,5 POWER SILVER TS02, TS03 MODELS: 1 AMP @ 120 V AC OR 28 V DC. 6 TIN-LEAD M TS01 MODELS: 0.4 VA MAX @20 V AC OR DC MAX. OR 3 G GOLD 3 AMPS @ 120 V AC OR 28 V DC. 2,3 LOW LEVEL/DRY CIRCUIT OR POWER GOLD OVER SILVER TS02, TS03 MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR 6 TIN-LEAD L 1 AMP @ 120 V AC OR 28 V DC. CONTACT MATERIAL/APPLICATION RECOMMENDATIONS–SEE SECTION N. I 1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. All models with all options when ordered with G, L, M or Q contact material. 2 END CONTACTS: Coin silver, with gold plate over nickel plate. B contact material standard with A and W terminations. 3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate Q contact material standard with C terminations. over nickel plate. 4 END CONTACTS: Coin silver, silver plated. 5 CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated. 6 TERMINALS: Copper alloy, with tin-lead alloy over nickel plate. SEAL E (STD.) EPOXY SEAL F EPOXY SEAL AND SPLASHPROOF RTV LATEX RUBBER SEAL NOTE: RTV latex rubber seal peels off easily after installation. Epoxy terminal seal standard. Not available with A termination. Dimensions are shown: IN (mm) Dimensions subject to change www.ittcannon.com I-10 Slide