Manufacturers
BURKERT 134317
Description
2/2-way-solenoid valve; servo assisted
Part Number
134317
Price
Request Quote
Manufacturer
BURKERT
Lead Time
Request Quote
Category
PRODUCTS - 1
Datasheet
Extracted Text
5281 2/2-way Solenoid Valve with servo-diaphragm, G 1/2 - G 2 1/2 • Universal version up to 16 bar • NBR, EPDM or FKM servo-diaphragms • Anti-waterhammer, low noise • NC or NO circuit function • Brass body or grey cast iron Type 5281 can be combined with... • Threaded port or flange connections Type 2508 Type 1078 Type 2511 Cable plug Timer unit ASI cable plug Servo-assisted solenoid valve with servo- Technical data diaphragm for the control of liquid or gaseous Orifi ce DN 13 - 65 mm media. A pressure difference of 0.5 bar is Body material required for a complete switchover. Threaded port Brass acc. to DIN EN 50930-6 Flange Grey cast iron Insulation class Power consumption Seal material version Inrush Hold (hot coil) NBR B AC AC DC EPDM H [VA] [VA/W] [W] FKM H 24 14/8 8 Inner part valve Stainless steel, brass Seal material NBR, EPDM, FKM Media NBR Neutral media, such as compressed air, water EPDM Oil and fat-free media FKM Hot air, per-solutions Media temperature NBR -10 to +80 °C EPDM -40 to +90 °C (with epoxy coil to +100°C) FKM -10 to +90 °C (with epoxy coil to +120°C) Ambient temperature Max. +55 °C Voltage tolerance ±10 % Duty cycle Continuous operation 100% ED Electrical connection Tag connector acc. to DIN EN 175301-803 Form A (previously DIN 43650) for cable plug type 2508 (see Ordering chart for accessory on p. 4) Protection class IP 65 with cable plug Installation As required, preferably with actuator upright 1) Response times 0.1 - 4 seconds (depending on orifi ce and differential pressure) 1) Measured at valve outlet at 6 bar and +20ºC. Opening: pressure build-up 0 to 90%, Closing: pressure relief 100 to 10% www.burkert.com p. 1/4 5281 Materials 1) 1 Coil: Polyamide 2) Epoxy 2 Plunger: 1.4105 3 Plunger-seal: NBR, EPDM, FKM 4 O-rings: NBR, EPDM, FKM 5 Cover: Brass 6 Spring: 1.4310 7 Diaphragm: NBR, EPDM, FKM 8 Valve body: Brass 1) with NBR-sealing 2) with EPDM-, FPM-sealing Ordering chart for valves (other versions on requests) Threaded port, brass body, without cable plug Item no. per voltage/frequency [V/Hz] Seal material NBR A 2/2-way valve NC G 1/2 13 4.0 0.2-16 134 317 134 318 134 320 G 3/4 20 6.4 0.2-16 134 321 134 322 134 324 G 1 25 10.0 0.2-16 134 325 134 326 134 328 G 1 1/4 32 20.0 0.2-16 134 329 134 330 134 332 G 1 1/2 40 20.0 0.2-16 134 333 134 334 134 336 G 2 50 40.0 0.2-16 134 337 134 338 134 340 G 2 1/2 65 40.0 0.2-16 134 341 134 342 134 344 Seal material FKM G 1/2 13 4.0 0.2-16 134 345 134 346 134 348 G 3/4 20 6.4 0.2-16 134 349 134 350 134 352 G 1 25 10.0 0.2-16 134 353 134 354 134 356 G 1 1/4 32 20.0 0.2-16 134 357 134 358 134 360 G 1 1/2 40 20.0 0.2-16 134 361 134 362 134 364 G 2 50 40.0 0.2-16 134 365 134 366 134 368 G 2 1/2 65 40.0 0.2-16 134 369 134 370 134 372 Seal material EPDM G 1/2 13 4.0 0.2-16 134 373 134 374 134 376 G 3/4 20 6.4 0.2-16 134 377 134 378 134 380 G 1 25 10.0 0.2-16 134 381 134 382 134 384 G 1 1/4 32 20.0 0.2-16 134 385 134 386 134 388 G 1 1/2 40 20.0 0.2-16 134 389 134 390 134 392 G 2 50 40.0 0.2-16 134 393 134 394 134 396 G 2 1/2 65 40.0 0.2-16 134 397 134 398 134 400 p. 2/4 Circuit function Port connection Orifi ce [mm] Kv value water 3 [m /h] Pressure range [bar] 024/DC 024/50-60 230/50-60 5281 Ordering chart for valves (other versions on requests), cont. Threaded port, brass body, without cable plug Item no. per voltage/frequency [V/Hz] Seal material NBR B 2/2-way valve NO G 1/2 13 4.0 0.2-16 178 873 178 872 178 874 G 3/4 20 6.4 0.2-16 178 876 178 875 178 877 G 1 25 10.0 0.2-16 178 879 178 878 178 881 G 1 1/4 32 20.0 0.2-16 178 883 178 882 178 884 G 1 1/2 40 20.0 0.2-16 178 886 178 885 178 887 G 2 50 40.0 0.2-16 178 889 178 888 178 891 Circuit function B: Total height “B1” 2 mm higher than for circuit function A Please note that the cable plug has to be ordered separately, see Ordering chart for accessory on last page or separate datasheet for Type 2508 Threaded port, brass body and manual override, without cable plug Item no. per voltage/frequency [V/Hz] Seal material NBR A 2/2-way valve NC G 1/2 13 4.0 0.2-16 139 307 139 308 138 314 G 3/4 20 6.4 0.2-16 139 309 139 310 139 311 G 1 25 10.0 0.2-16 139 312 139 313 138 801 G 1 1/4 32 20.0 0.2-16 139 314 139 315 139 316 G 1 1/2 40 20.0 0.2-16 139 317 139 318 139 319 G 2 50 40.0 0.2-16 139 320 139 321 139 322 G 2 1/2 65 40.0 0.2-16 139 323 139 324 139 325 Flange acc. to DIN 2501, grey cast iron flange body, without cable plug Item no. per voltage/frequency [V/Hz] Seal material NBR A 2/2-way valve NC Flange acc. 25 10.0 0.2-16 134 401 134 402 134 404 DIN 2501 32 20.0 0.2-16 134 405 134 406 134 408 40 20.0 0.2-16 134 409 134 410 134 412 50 40.0 0.2-16 134 413 134 414 134 416 p. 3/4 Circuit function Circuit function Circuit function Port connection Port connection Port connection Orifi ce [mm] Orifi ce [mm] Orifi ce [mm] Kv value water Kv value water Kv value water 3 3 3 [m /h] [m /h] [m /h] Pressure range Pressure range Pressure range [bar] [bar] [bar] 024/DC 024/DC 024/DC 024/50-60 024/50-60 024/50 230/50-60 230/50-60 230/50 5281 Dimensions [mm] Threaded port version Flange version Threaded port Flange DN D B1 B1 B1* E1 F L1 B2 B2* G L2 Circuit Circuit function A function B 13 G 1/2 100.0 102.0 110 40 14 65 – – – – 20 G 3/4 107.5 109.5 117.5 60 16 100 – – – – 25 G 1 116.0 118.0 126.0 70 18 115 159.5 169.5 120 160 32 G 11/4 126.5 128.5 136.5 85 20 126 171.5 181.5 140 180 40 G 11/2 135.5 137.5 145.5 85 22 126 180.5 190.5 150 200 50 G 2 157.2 159.2 167.2 115 24 164 204.7 214.7 165 230 65 G 21/2 157.2 159.2 167.2 115 27 180 – – – – B1* + B2* Version with manual override Further versions on request i Approvals UL/UR/CSA, ATEX-Ex, UL-fi re protection, European gas approval Voltage 110/50, other non-standard voltages Port connection NPT, Rc Ordering chart for accessory Cable plug Type 2508 according to DIN EN 175301-803 Form A Fixing screw Flat seal None (standard) 0 - 250 V AC/DC 008 376 further versions see datasheet Type 2508 The delivery of a cable plug includes the fl at seal and the fi xing screw. For other cable plug versions acc. to DIN EN 175301-803 Form A (previously DIN 43650), see separate datasheet Type 2508. To fi nd your nearest Bürkert facility, click on the orange box g www.burkert.com In case of special application conditions, Subject to alteration please consult for advice. © Christian Bürkert GmbH & Co. KG 1201/5_EU-en_00891710 p. 4/4 Circuitry Voltage / frequency Item no.
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the 134317 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods