4610 Automated Programming System ™ Automated Programming System Unparalleled Programming Combine the most successful fine-pitch, automated platform available (the 4000 series) and the industry's fastest universal programming technology and you get the 4610. It is  High-speed universal programming system with support for over 23,000 the fastest automated programmer available-at 0.24s/Mb*. Then add support for devices  virtually every device from 1.5V to 5V (Vdd) and you have the most versatile automated  Production throughput up to 1,200 devices per hour programmer on the market. The 4610 requires just 11 sockets and still beats the  Programs Flash memories, FPGAs, competition because of its unparalleled programming times and throughput. antifuse FPGA, PLDs, and Microcontrollers, including MCU’s with embedded Flash memory  Programs at an unsurpassed 0.24s/Mb* with Sixth Generation Technology  Very low voltage support down to 1.5V (Vdd)   On-the-fly vision centering and fine-pitch handling without throughput reduction  Handles all package types from DIP to µBGA including very small package such as SOT23 and MSOP8, a BPM Microsystems exclusive  USB 2.0 communications bus  Most successful line of fine-pitch, automated programming systems  Configurable options and scaleable capacity are perfect for medium and  high volume applications  Variety of input/output and marking options with tubes, trays or tape  Laser marking with serialization and date code option  The fastest programming times and unrivaled throughput means lower BPM MICROSYSTEMS cost-per-device *ST Microelectronics™ M28W640CB, 5373 WEST SAM HOUSTON PKWY N., SUITE 250 program only. HOUSTON, TEXAS 77041 T: 713.688.4600 T: 800.225.2102 F: 713.688.0920 WWW.BPMMICRO.COM NEED LOGO N 4610 Technical Specifications PICK & PLACE SYSTEM SYSTEM REQUIREMENTS Handler Throughput: 1200 DPH Air Pressure: 80 psi (5.56 bars) Component Processing Range: SOT23 to 240-pin QFP Air Flow: 8.1 SCFM (203 1/min) (with laser) Laser Alignment: component range – SOT23 to 208- pin Operational Temperature: 55º to 90ºF (13º-32ºC) QFP, minimum pitch 0.5mm Relative Humidity: 30–90% Placement Accuracy: ± 0.0024" (0.06mm) Floor Space: length 60" (152.4 cm) and width 75" Placement Repeatability: ± 0.0012" (0.03mm) (190.5cm) Placement Force: 60-600 grams positional control Input Line Voltage: 100-240 VAC Dimensions: length 42" (106.6cm), width with Input Line Frequency: 50/60 Hz laser 63" (160.2cm), width without laser 42" (106.6cm), and height with Power Consumption: 2.4 KVA light tower 72" (182.8cm) Shipping Weight: 1700 lbs. (771 kg) Shipping Dimensions: length 48" (122cm), width 48" (122), PROGRAMMING SYSTEM and height 69" (175cm) Architecture: Concurrent, independent universal Self Test: power supplies, CPUs, memory, X, Y, programmer at each site Z,0 motion systems, spindle run out and height, vacuum system Devices Supported: including, but not limited to, antifuse, low voltage, PROM, EPROM, EEPROM, Flash EEPROM, Microcontrollers, SPLD, CPLD, FPGA POSITIONING SYSTEM Technologies Supported: TTL, CMOS, ECL, BiCMOS, Flash, EPROM, EEPROM, fuse, anti-fuse, X-Y Drive System: high-performance stepper motor- (including FPGAs) driven precision belt Included System Controller: High-Grade Industrial Pentium PC, X-Y Encoder Type: linear optical scale SVGA monitor, keyboard and mouse Calibration: automatic self-calibration X-Y Axis Resolution: 0.0002” (0.0050mm) Diagnostics: pin continuity test, RAM, ROM, Z Drive System: high-performance stepper motor CPU, pin drivers, power supply, driven lead screw communications, cable, calibration, timing, ADC, DAC, actuator, leakage current Placement Accuracy: 90µ@ 4 sigmas, 67µ@ 3 sigmas Memory: 64MB per site Z Axis Resolution: ± 0.001" (0.025mm) Programming Sites: 4 to 11 Z Axis Repeatability: ± 0.0015" (0.038mm) Theta Drive System: precision stepper motor-driven anti-backlash twin gear assembly PIN DRIVERS Theta Axis Resolution: 0.015° Quantity: 240 per site Theta Axis Repeatability: ± 0.02” Analog Slew rate: 0.3 to 25V/µs Vpp Range: 0-25V Ipp Range: 0-70mA continuous, 250mA peak VISION SYSTEM Type: CyberOptics Laser Align system Vcc Range: 0-12V Component Location Resolution: 1 micron Icc Range: 0-1A Very low voltage: to 1.5V (Vdd) Rise Time: 4ns SOFTWARE Overshoot: none File Type: binary, Intel, JEDEC, Motorola, POF, straight hex, hex-space, Tekhex, Clocks: continuously variable 1 MHz to 30 Extended Tekhex, and others; MHz automatic file type recognition Protection: overcurrent shutdown, power Device Commands: blank, check sum, compare, failure shutdown options, program, test, verify, secure, continuity, ID check, erase Independence: pin drivers and waveform generators are fully independent Features: graphic display or job status, and concurrent on each site JobMaster™ control software, data editor, revision history, session logging, on-line help, device and algorithm information, optional simple and complex serialization © BPM Microsystems. Concurrent Programming System is a registered trademark of BPM Microsystems. Windows is registered trademark of Microsoft Corporation 4610DS_EN_1006 BPM MICROSYSTEMS - Setting the Standard in Device Programming  5373 WEST SAM HOUSTON PKWY N., SUITE 250 - HOUSTON, TEXAS 77041 T: 713.688.4600 / 800.225.2102 / F: 713.688.0920 / BPMMICRO.COM