3610 Automated Programming System ™ Automated Programming System Simple. Efficient. Versatile.  High-speed universal programming The 3610 is the first automated programming system to incorporate self-teaching and system with support for over 23,000 devices non-stop operation. It is designed to be the most convenient way to program all  Production throughput up to 700 varieties of surface mount devices. The 3610 is a powerful tool capable of accurately devices per hour  programming up to 700 devices per hour and is designed to be the most simple and  Programs Flash memories, FPGAs, antifuse FPGA, PLDs, and efficient programming system for medium-volume production environments. Microcontrollers, including MCU’s with embedded Flash memory  Programs at an unsurpassed 0.24s/Mb* with Sixth Generation Technology  Very low voltage support down to 1.5V (Vdd)   On-the-fly vision centering and fine-pitch handling without throughput reduction  Handles all package types from DIP to µBGA including very small package such as SOT23 and MSOP8, a BPM Microsystems exclusive  Automated tray shuttles provide true non-stop operation  Automatic self-teaching  Small footprint  USB 2.0 communications bus   Configurable options and quick job changeover make it ideal for high mix or high volume production  Variety of input/output and marking options with tubes, trays or tape  Laser marking with serialization and date code option BPM MICROSYSTEMS  The fastest programming times and unrivaled throughput means lower 5373 WEST SAM HOUSTON PKWY N., SUITE 250 cost-per-device HOUSTON, TEXAS 77041 *ST Microelectronics™ M28W640CB, program only. T: 713.688.4600 T: 800.225.2102 F: 713.688.0920 WWW.BPMMICRO.COM NEED LOGO N 3610 Technical Specifications PICK & PLACE SYSTEM PROGRAMMING SYSTEM Handler Throughput: 700 DPH (for comparison purposes) Architecture: Concurrent, independent universal programmer at each site Component Processing Range: SOT23 to 240-pin QFP Devices Supported: including, but not limited to, Laser Alignment: component range – SOT23 to 208-pin Antifuse, Low Voltage, PROM, QFP, minimum pitch 0.5mm EPROM, EEPROM, Flash EEPROM, Microcontrollers, SPLD, CPLD, FPGA Placement Force: 60-600 grams positional control Technologies Supported: TTL, CMOS, ECL, BiCMOS, Flash, Dimensions: length 50” (127cm), width 24” EPROM, EEPROM, fuse, anti-fuse, (61cm), and height 45” (114.3cm) (including FPGAs) Weight: 400 lbs. (182kg) Included System Controller: High-Grade Industrial Pentium PC, SVGA monitor, keyboard and mouse Shipping Weight: 650 lbs. (295kg) Calibration: automatic self-calibration Shipping Dimensions: length 64” (162cm), width 38” (96cm), and height 60” (162cm) Diagnostics: pin continuity test, RAM, ROM, CPU, pin drivers, power supply, Self Test: power supplies, CPUs, memory, X, Y, communications, cable, Z,0 motion systems, nozzle run-out calibration, timing, ADC, DAC, and height actuator, leakage current Memory: 64MB per site Pin Controllers: one CPU with hardware accelerator per site POSITIONING SYSTEM Programming Sites: 4 X-Y Drive System: high-performance stepper motor driven precision belt X-Y Encoder Type: linear optical scale PIN DRIVERS Quantity: 240 per site X-Y Axis Resolution: 0.0002” (0.0050mm) Analog Slew rate: 0.3 to 25V/µs Z Drive System: high-performance stepper motor driven lead screw Vpp Range: 0-25V Theta Drive System: precision stepper motor-driven Ipp Range: 0-70mA continuous, 250mA peak direct drive assembly Vcc Range: 0-12V Theta Axis Resolution: 0.014° Icc Range: 0-1A Theta Axis Repeatability: ± 0.02” Very low voltage: to 1.5V (Vdd) Rise Time: 4ns Placement Accuracy: 90µ@ 4 sigmas, 67µ@ 3 sigmas Overshoot: none Clocks: continuously variable 1 MHz to 30 MHz VISION SYSTEM Protection: overcurrent shutdown, power failure shutdown Type: CyberOptics Laser Align system Independence: pin drivers and waveform Component Location Resolution: 1 micron generators are fully independent and concurrent on each site SYSTEM REQUIREMENTS SOFTWARE Air Pressure: 80 psi (5.56 bars) File Type: binary, Intel, JEDEC, Motorola, POF, Air Flow: 2.0 SCFM (50.1L/min) straight hex, hex-space, Tekhex, Extended Tekhex, and others; Operational Temperature: 55° to 90° F (13°–32° C) automatic file type recognition Relative Humidity: 30–80% Device Commands: blank check, sum, compare, program, test, verify, secure, Minimum Floor Space: length 72” (182.9cm) and width 42” continuity, ID check, erase (without tape and reel attachment) (106.6cm) Features: graphic display or job status, Input Line Voltage: 100-130/200-260 VAC JobMaster™ control software, data editor, revision history, session Input Line Frequency: 50/60 Hz logging, on-line help, device and algorithm information, optional Power Consumption: 1 KVA simple and complex serialization © BPM Microsystems. Concurrent Programming System is a registered trademark of BPM Microsystems. Windows is registered trademark of Microsoft Corporation 3610DS_EN_1006 BPM MICROSYSTEMS - Setting the Standard in Device Programming  5373 WEST SAM HOUSTON PKWY N., SUITE 250 - HOUSTON, TEXAS 77041 T: 713.688.4600 / 800.225.2102 / F: 713.688.0920 / BPMMICRO.COM