Elite.Parts Manufacturers B BOURNS 85A2A-B28-B15/R57L
About product Specifications Datasheet FAQ

BOURNS 85A2A-B28-B15/R57L

Description

Bourns 85A2A-B28-B15/R57L Potentiometer - Bourns 85A2A-B28-B15/R57L PANEL CONTROL-5/8in 16MM ST-CP SWITCH; Lead Free

Part Number

85A2A-B28-B15/R57L

Price

Request Quote

Manufacturer

BOURNS

Lead Time

Request Quote

Category

PRODUCTS - 8

Specifications

Failure Rate

Not Required

Military Standard

Not Required

Mounting Style

Panel Mount/Through Hole

Number of Turns

1(Elec)/1(Mech)Turn

Operating Temp Range

-40°C to 125°C

Power Rating

1/2W

Product Dimensions (LxHxD)

47.64mm x 17.52mm x 15.88mm

Resistance

10kohm

Shaft Diameter

6.35mm

Technology

Cermet

Temperature Coefficient

±1000

Termination Style

Pin

Tolerance (+ or -)

20%

Type

Potentiometer

Datasheet

pdf file

Bourns=85A2A-B28-B15-R57L=datasheet1-252729304.pdf

397 KiB

Extracted Text

Non-RoHS models are currently Features available, but not recommended ■ Metal shaft and bushing for new designs. See Product Obsolescence Memo for details. ■ Consistent, smooth quality feel ■ Up to 4 sections available ■ Rotary switch option designed for “on-off” function control ■ RoHS compliant versions available* 81/82 - 5/8 ” Square Single-Turn Panel Control 85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch Potentiometer SpeciŢ cations 1 Initial Electrical Characteristics Conductive Plastic Element Cermet Element Standard Resistance Range Linear Tapers (A, B, E, & H) ..................................................................(B & E) 1 K ohms to 1 megohm ............. (A & H) 100 ohms to 1 megohm Audio Tapers (C, D, F, G, S, & T) .........................................................(D, G, S, & T) 1 K ohms to 1 megohm ... (C & F) 1 K ohms to 1 megohm Total Resistance Tolerance .........................................................................±20 % or 10 % ...................................... ±10 % or 5 % Independent Linearity .................................................................................±5 % ...................................................... ±5 % Absolute Minimum Resistance ...................................................................2 ohms maximum .................................. 2 ohms maximum Effective Electrical Angle ............................................................................(Linear tapers) 240 ° ± 5 ° ...................... (Linear tapers) 240 ° ± 6 ° (Audio tapers) 225 ° ± 5 ° ...................... (Audio tapers) 225 ° ± 6 ° Contact Resistance Variation .....................................................................±1 % ...................................................... ±1 % or 3 ohms (whichever is greater) Dielectric Withstanding Voltage (MIL-STD-202, Method 301) Sea Level ..............................................................................................1,500 VAC minimum .............................. 1,500 VAC minimum 70,000 Feet ..........................................................................................500 VAC minimum ................................. 500 VAC minimum Insulation Resistance (500 VDC) ................................................................1,000 megohms minimum ..................... 1,000 megohms minimum Power Rating At 70 °C (Voltage Limited By Power Dissipation or 350 VAC, Whichever Is Less) +70 °C Single Section Assembly .........................................................(Linear tapers) 0.5 watt .......................... (Linear tapers) 2 watts (Audio tapers) 0.25 watt ........................ (Audio tapers) 1 watt +70 °C Multiple Section Assembly.......................................................(Linear tapers) 0.5 watt/section ............. (Linear tapers) 1 watt/section (Audio tapers) 0.25 watt/section ........... (Audio tapers) 0.5 watt/section +125 °C ................................................................................................0 watt ..................................................... 0 watt Theoretical Resolution ................................................................................Essentially inŢ nite .................................. Essentially inŢ nite 1 Environmental Characteristics Operating Temperature Range ...................................................................-40 °C to +125 °C .................................. -40 °C to +125 °C Storage Temperature Range ......................................................................-55 °C to +125 °C .................................. -55 °C to +125 °C Temperature CoefŢ cient Over Storage Temperature Range ......................±1,000 ppm/°C ...................................... ±150 ppm/°C Vibration (Single Section) ...........................................................................15 G ....................................................... 15 G Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum Shock (Single Section) ...............................................................................30 G ....................................................... 30 G Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum Load Life .....................................................................................................1,000 hours ........................................... 1,000 hours Total Resistance Shift ...........................................................................±10 % maximum ................................... ±5 % maximum Rotational Life (No Load) ............................................................................100,000 cycles ...................................... 100,000 cycles Total Resistance Shift ...........................................................................(Linear taper) 10 ohms or ..................... (All tapers) ±5 % TRS maximum ±10 % TRS max. (whichever is greater) (Audio taper) ±20 % maximum Contact Resistance Variation @ 50,000 cycles (Audio taper) ..................................................................................±3 % ...................................................... ±3 % (Linear taper) .................................................................................±2 % ...................................................... ±2 % Moisture Resistance (MIL-STD-202, Method 103, Condition B) Total Resistance Shift ...........................................................................(B & E tapers) ±10 % maximum ........... ±5 % maximum (all tapers) (D, G, S & T tapers) ±20 % maximum Insulation Resistance (500 VDC) ..........................................................100 megohms minimum ........................ 100 megohms minimum IP Rating .....................................................................................................IP 40 ...................................................... IP 40 Mechanical Characteristics Stop Strength 1/4 ” and 1/8 ” diameter shafts ......................................................................................................................................................... 45.19 N-cm (4 lb.-in.) 7/8 ” length shaft ................................................................................................................................................................................. 22.6 N-cm (2 lb.-in.) Mechanical Angle ...................................................................................................................................................................................................... 300 ° ±5 ° Torque Starting and Running Torque (Non-Locking Bushings) Single Section .................................................................................................................................................................0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.) Dual Section ....................................................................................................................................................................0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.) Triple Section ...................................................................................................................................................................0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.) Quadruple Section ..........................................................................................................................................................0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.) Starting and Running Torque (Locking Bushings) .....................................................................................................0.14 to 2.82 N-cm (0.2 to 4.0 oz.-in.) Shaft Locking Torque with Locknut @ 10 in-lb. (B & E Bushings) ........................................................................................................ 14 N-cm (20 oz-in.) Mounting ...................................................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum Weight (Single Section).............................................................................................................................................................................. 21 grams maximum (Each Additional Section) ...................................................................................................................................................................... 6 grams maximum Terminals .......................................................................................................................................................................... Printed circuit terminals or J-Hooks Soldering Condition ..................................................................Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter. Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean ţ ux. Marking ..........................................................................Manufacturer’s trademark, wiring diagram, date code and resistance, manufacturer’s part number Ganging (multiple section potentiometers) ..................................................................................................................................................... 4 cup maximum Hardware ...........................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number. For dimensional drawings see pages 3 & 4. For ordering information see page 5. NOTE: Model 81/82 performance speciŢ cations do not apply to units subjected to printed circuit board cleaning procedures. 1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted. *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifi cations are subject to change without notice. Customers should verify actual device performance in their specifi c applications *RoHS COMPLIANT VERSIONS AVAILABLE 81/82 - 5/8 ” Square Single-Turn Panel Control 85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch Rotary Switch SpeciŢ cations 1 Initial Electrical Characteristics Contacts: DPST ...............................................................................................................................................................................N.O/N.O.,N.C./N.C. or N.O./N.C. DPDT ................................................................................................................................................................................2 N.O./N.C. (break before make) Power Rating (Resistive Load): DPST ............................................................................................................ 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz DPDT ...........................................................................................................................................................1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC Contact Resistance (0.1 VDC-10 mA) ..................................................................................................................................................... 10 milliohms nominal Contact Bounce ................................................................................................................................................................................ 5 milliseconds maximum Dielectric Withstanding Voltage (MIL-STD-202, Method 301) Sea Level ............................................................................................................................................................................................. 1500 VAC minimum Insulation Resistance ....................................................................................................................................................................... 1000 megohms minimum 1 Environmental Characteristics Operating Temperature Range ...........................................................................................................................................................................0 °C to +70 °C Storage Temperature Range ........................................................................................................................................................................ -65 °C to +125 °C Vibration (Dual Section) ....................................................................................................................................................................................................... 8 G (Triple Section) .................................................................................................................................................................................................... 5 G (Quadruple Section) ........................................................................................................................................................................................... 3 G Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum Shock (Dual Section) ......................................................................................................................................................................................................... 20 G (Triple Section) ...................................................................................................................................................................................................... 15 G (Quadruple Section) ............................................................................................................................................................................................. 10 G Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum Rotational Life .....................................................................................................................................................................................................25,000 cycles Switch Actuating Torque (50% Duty cycle @ Rated Power Load) ..................................................................................1.41 to 4.94 N-cm (2 to 7 oz.-in.) Contact Resistance ...................................................................................................................................................................... 100 milliohms maximum Moisture Resistance (MIL-STD-202, Method 106, Condition B) Contact Resistance (0.1 VDC-10 mA) ............................................................................................................................................ 10 milliohms maximum Insulation Resistance (After 24 Hours @ Room Temperature) (500 VDC) .................................................................................... 100 megohms minimum Switch Housing Material ................................................................................................................. High temperature, ţ ame retardant, thermosetting plastic 1 Mechanical Characteristics Actuating Torque (Each Section, Switch Module Only) .......................................................................................................3.53 to 10.6 N-cm (5 to 15 oz.-in.) Running Torque (Out of Detent, 2-4 Module Assembly) .....................................................................................................0.21 to 1.41 N-cm (0.3 to 2 oz.-in.) Detent ..................................................................................................................................................................................................... CW or CCW standard Actuation Angle ...................................................................................................................................................................................................................25 ° Contact Materials ..........................................................................................................................................................................Fine silver with gold overlay Terminal Styles .................................................................................................................................................................................................. Solder lug only Standard Orientation ..............................................................................................................................................................In-line with control terminals Optional ..........................................................................................................................................................................Rotated 90 ° CCW from standard Terminal Strength (Before and After Soldering Heat Exposure) .......................................................................................................... 0.9 Kg (2 lbs.) minimum NOTE: Model 81/82 performance speciŢ cations do not apply to units subjected to printed circuit board cleaning procedures. 1 At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted. SpeciŢ cations are subject to change without notice. Customers should verify actual device performance in their speciŢ c applications 81/82 - 5/8 ” Square Single-Turn Panel Control Product Dimensions "A" Bushing "B" Bushing "C" Bushing 3/8 " (9.53 mm) Dia. Plain - Single Shaft 3/8 " (9.53 mm) Dia. Plain - Single Shaft 1/4 " (6.35 mm) Dia. Plain - Single Shaft 12.7,15.88,19.05,22.23± .79 9.53,12.7,15.88,19.05,22.23 ± .79 (1/2, 5/8, 7/8, ± 1/32) 15.88 ± .79 9.50 ± .38 (3/8, 1/2, 5/8, 3/4, 7/8, ± 1/32) 6.35 ± .13 STANDARD 12.70 ± .13 (5/8 ± 1/32) 1/4-32 UNEF 3/8-32 UNEF (.375 ±.015) STANDARD (.250 ± .005) 6.35 ± .03 (.500 ± .005) STANDARD DIA. 3.162 ± .025 (1/4 ± 1/32) DIA. 1.19 (.1245 ± .001) 1.19 SHAFT SLOT WIDE X SHAFT SLOT WIDE X (.047) .79 (.047) SHAFT SLOT WIDE X 1.60 + .38/- .00 (.031) DEEP 1.60+.38/-.00 DEEP .79 ± .25 (.063 +.015/-.000) DEEP (.063+.015/-.000) 7.92 11.13 (.031 ± .010) MIN. 6.32 ± .03 4.45 .25 (.438) (.312) 3/8-32 UNEF DIA. 45 ° ±5 ° X (.249 ± .001) (.175) .25 9.53 ± .13 (.010) MIN. 45 ° ±5 ° X CHAMFER MIN. (.010) (.375 ± .005) 6.35 ± .05 .25 CHAMFER PILOT DIA. 45 ° ±5 ° X 9.53 ± .13 (.250 ± .002) (.010) CHAMFER PILOT DIA. 5.49 16.00 1.52 (.375 ± .005) OPTIONAL FLAT LONG OR FROM PILOT DIA. (.216) (.63) (.06) 2.39 ± .13 6.35 1.52 OPTIONAL FLAT LONG OR FROM (.094 ± . 005) (.250) (.06) 17.46 14.30 "A" BUSHING END FOR SHAFTS UNDER "C" BUSHING END FOR SHAFTS UNDER ( ) 11/16 (9/16) "E" Bushing "A" Bushing "C" Bushing 1/4 " (6.35 mm) Dia. Locking - Single Shaft 3/8 " (9.53 mm) Dia. Plain - Concentric Shaft 1/4 " (6.35 mm) Dia. Plain - Concentric Shaft 15.88 ± .79 28.58 ± .79 25.40 ± .79 6.32 ± .03 12.7 ± .13 (1-1/8 ± 1/32) (5/8 ± 1/32) DIA. (1 ± 1/32) 19.05 ± .79 (.249 ±.001) STANDARD STANDARD STANDARD (.500 ± .005) 15.88 ± .79 3.18 ± .03 (3/4 ± 1/32) 3.162 ± .025 (5/8 ± 1/32) DIA. DIA. STANDARD 9.53 (.125 ± .001) 6.35 1.98 ± .03 (.1245 ± .001) STANDARD DIA. (.375) (.25) (.078 ± .001) .78 10.80 SHAFT SLOT WIDE X (.031) (.425) .78 ± .03 DEEP 1/4-32 UNEF (.031 ± .001) MIN. 1.98 ± .03 DIA. 3.162 ± .025 TRIPLE CONCENTRIC (.078 ± .001) DIA. 6.35 ± .05 3/8-32 UNEF 1/4-32 UNEF .25 (SPECIAL ORDER) (.1245 ± .001) 45 ° ±5 ° X (.250 ± .002) (.010) CHAMFER 7.47 3.18 PILOT DIA. OUTER SHAFT DIA. OPERATES SECTION #1 INNER SHAFT OUTER SHAFT DIA. OPERATES SECTION #1 INNER SHAFT (.249) (.125) 3.18 .078 DIA. OPERATES SECTION #2, #3, & #4 ("G" STYLE) DIA. OPERATES SECTION #2, #3, & #4 ("G" STYLE) (.125) (1.95) "S" Bushing 10 mm Dia. Locking - Single Shaft 22.00 ± 0.79 (.866 ± .031) 12.50 ± 0.38 STANDARD (.492 ± .015) 1.01 ± 0.10 SHAFT SLOT 1 3 (.040 ± .004) MM CCW 1.80 ± 0.25 DIMENSIONS: WIDE X DEEP (INCHES) (.071 ± .010) 2 6.000 +0.000/-0.075 POTENTIOMETER DIA. (.236 +.000/-.003) M10 x 0.75-6g .25 45 ° ±5 ° X 10.92 (.010) MIN. CHAMFER (.430) 9.90 PILOT DIA. (.390) SpeciŢ cations are subject to change without notice. Customers should verify actual device performance in their speciŢ c applications 81/82 - 5/8 ” Square Single-Turn Panel Control Product Dimensions Dual Unit - PC Pins & J-Hook Triple Unit - PC Pins & J-Hook Quad Unit - PC Pins & J-Hook 36.20 ± 1.19 46.36 ± 1.19 26.04 ± .79 (1.425 ± .047) (1.825 ± .047) (1.025 ± .031) 10.16 ± .38 10.16 ± .38 10.16 ± .38 TYP. TYP. (.400 ± .015) (.400 ± .015) (.400 ± .015) Model 81/82 Model 81 Shaft Flat Orientation* Single Unit - PC Pins & J-Hook Suggested PC Board Layout - PC Pins (Single-Shaft Style Bottom View) 120 ° ± 5 ° CCW END 15.88 ± .38 11.94 (.625 ± .015) 5.08 ± .13 1.14 15.88 ± .41 (.470) DIA. 1 (.045) (.625 ± .016) (.200 ± .005) 3 9.58 ± .38 2 (.377 ± .015) 15.88 ± .38 1 23 (.625 ± .015) FLATTED SHAFT 5.08 ± .13 10.16 ± .13 30 ° ±5 ° (.200 ± .005) 12.7 5.33 ± .76 (.400 ± .005) (.210 ± .03) (.50) 3.81 MAX. 3 PLCS. Note: For units with dual concentric shaft styles, a (.150) 5.97 ± .38 2.54 (.100) spacer is added between the module(s) driven .81 (.235 ± .015) DIA. by the outer shaft and those driven by the inner shaft. (.032) 5.08 ± .38 For G, K, or V shafts, add the spacer between 5.08 ± .38 (.200 ± .015) modules 1 and 2. For L or M shafts, add the spacer (.200 ± .015) between modules 2 and 3. For N or P shafts, add the Terminal outlines shown as solid lines represent PC Pins, available spacer between modules 3 and 4. SLOTTED SHAFT on Model 81. Dashed line terminal outline represents "J" Hook, *EXCLUDES MODELS 83 AND 84 available on Model 82. MM DIMENSIONS: (INCHES) SpeciŢ cations are subject to change without notice. Customers should verify actual device performance in their speciŢ c applications 85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch Product Dimensions Primary Potentiometer Module Secondary Potentiometer Module Shaft Flat Orientation* Model 85/86 Model 85/86 14.53 30 ° ± 5 ° 15.88 (.572) 120 ° ± 5 ° CCW END 10.16 9.58 ± .38 (.625) (.400) (.377 ± .015) 15.88 (.625) 12.7 (.50) FLATTED SHAFT SLOTTED SHAFT 1.60 *EXCLUDES MODELS 83 AND 84 5.97 5.08 (.063) (.235) (.200) 5.08 5.08 (.200) 8.56 (.200) 8.56 (.337) (.337) Switch Module Assembly Sequence 15.88 Model 85/86 Model 85/86 (.625) Secondary Potentiometer Module REF. 31 2.77 (.109) REAR 2.29 PLATE (.090) COVER TYP. 1.35 6 PLACES (.053) 18.42 4 5 6 2 (.725) 2.41 1.14 2.92 L X W (.095) (.045) (.115) NOTE: Switch terminals shown in vertical position. SLOT TYP. 6 PLACES 9.53 4 4 4 3 3 3 (.375) 4 3 5 2 1 6 1 1 2 2 1 2 DPST (NO/NC) DPST (NC/NC) DPST (NO/NO) DPDT (NC/NC) REAR SWITCH PRIMARY (TYPES 50, 51, 56, 57) (TYPES 54, 55, 60, 61) (TYPES 52, 53, 58, 59) (TYPES 70, 71, 72, 73) COVER MODULE POTENTIOMETER PLATE MODULE Switch contacts shown in detent position. Locating Lug Options - All Model 80 Series 2.36 ± .76 1.98 ± .41 E = H & J = (.093 ± .03) (.078 ± .016) J H A E 9.53 11.10 7.75 13.49 .79 ± .41 .46 (.375) (.437) (.305) (.531) (.031 ± .016) (.018) 2.36 3.18 2.31 3.18 (.093) (.125) (.091) (.125) MM DIMENSIONS: (INCHES) NOTE: "D" OPTION - NO A/R LUG. OTHER LOCATING LUG OPTIONS AVAILABLE. FOR DETAILS CONSULT FACTORY. .127 TOLERANCES EXCEPT AS SHOWN: DECIMAL .XXX ± (.005) .38 .XX ± (.015) ANGLE ± 5 % SpeciŢ cations are subject to change without notice. Customers should verify actual device performance in their speciŢ c applications 81/82 - 5/8 ” Square Single-Turn Panel Control 85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch How To Order Models 81 & 82: Part number for multiple section potentiometers must have a taper and resistance value for 81 A 2 A - B 28 - A 15 / A15 L each section. 85 A 2 A - B 28 - A 15 / R51 L Models 85 & 86: Part number must contain a switch type. RoHS IDENTIFIER ANTI-ROTATION LUG L Compliant A Single .305 R, 90 °CW Blank Non-Compliant B Double .305 R, 90 ° & 270 °CW Non-Compliant versions are C Single .305 R, 270 °CW available, but not recommended D No Lug for new designs. E Single .531 R, 90 °CW F Single .305 R, 180 °CW J Single .375 R, 90 °CW K Double .375 R, 90 ° & 270 °CW SWITCH TYPE (MODELS 85 & 86 ONLY) (R50) DPST N.O./N.C. CW Detent In-Line Term # SECTIONS APPLICABLE MODELS���� (R51) DPST N.O./N.C. CCW Detent In-Line Term (R52) DPST N.O./N.O. CW Detent In-Line Term 1 Single 81,82 (R53) DPST N.O./N.O. CCW Detent In-Line Term 2 Double 81,82,85,86 (R54) DPST N.C./N.C. CW Detent In-Line Term SHAFT AVAILABLE 3 Triple 81,82,85,86 (R55) DPST N.C./N.C. CCW Detent In-Line Term LENGTH ONLY IN (R56) DPST N.O./N.C. CW Detent Horz Term 4 Quad 81,82,85,86 (R57) DPST N.O./N.C. CCW Detent Horz Term (FMS) BUSHING (R58) DPST N.O./N.O. CW Detent Horz Term Code Description Code (R59) DPST N.O./N.O. CCW Detent Horz Term BUSHING 12 3/8 ” L C, N, J (R60) DPST N.C./N.C. CW Detent Horz Term A Plain 3/8 ” (9.53 mm) D x 3/8 ” (9.53 mm) L 16 1/2 ” L A, C, J, N (R61) DPST N.C./N.C. CCW Detent Horz Term 20 5/8 ” L A, B, C, E, J, N B Locking 3/8 ” (9.53 mm) D x 1/2 ” (12.7 mm) L (R70) DPDT CW Detent In-Line Term 24 3/4 ” L A, B, C, E, J, N (R71) DPDT CCW Detent In-Line Term C Plain 1/4 ” (6.35 mm) D x 1/4 ” (6.35 mm) L (R72) DPDT CW Detent Horz Term 28 7/8 ” L A, B, C, E, J, N E Locking 1/4 ” (6.35 mm) D x 1/2 ” (12.7 mm) L (R73) DPDT CCW Detent Horz Term 32 1 ” L A, B, C, E, J, N J Plain 3/8 ” (9.53 mm) D x 1/4 ” (6.35 mm) L 36 1-1/8 ” L A, B, C, E, J, N N Plain 1/4 ” (6.35 mm) D x 3/8 ” (9.53 mm) L 40 1-1/4 ” L A, B, C, E, J, N R Plain 10 mm D x 9 mm L Metric S Locking 10 mm D x 12.5 mm L 10 10 mmL U U Plain 7 mm D x 6 mm L 13 13 mmL U ELEMENT TAPER RESISTANCE CODE 16 16 mmL R, S TYPE/TOLERANCE VALUE IN OHMS 19 19 mmL R, S MODEL (A) Linear Cermet ±10 % (05) - 100 (30) - 15 K 22 22 mmL R, S, U 81 Single-Turn, PC Pins (H) Linear Cermet ±5 % (28) - 150 (16) - 20 K 30 30 mmL R, S 82 Single-Turn, J-Hooks (06) - 200 (17) - 25 K 42 42 mmL R, S (07) - 250 (18) - 50 K 85 Single-Turn, Pot/Rotary Switch, PC Pins 50 50 mmL R, S (08) - 500 (19) - 75 K 86 Single-Turn, Pot/Rotary Switch, J-Hooks (09) - 750 (20) - 100 K (10) - 1 K (31) - 150 K AVAILABLE ONLY IN (29) - 1.5 K (21) - 200 K SHAFT TYPE LENGTHS BUSHINGS (11) - 2 K (22) - 250 K (CODE) (CODE) (12) - 2.5 K (23) - 500 K A Single Plain 1/4 ” (6.35 mm) D 16,20,24,28 A, B, J (13) - 5 K (24) - 750 K (14) - 7.5 K (25) - 1 M B Single Slotted 1/4 ” (6.35 mm) D 16,20,24,28 A, B, J (15) - 10 K C Single Flatted 1/4 ” (6.35 mm) D 20,24,28 A, B, J (B) Linear C-P ±20 % (10) - 1 K (18) - 50 K E Single Slotted 1/8 ” (3.18 mm) D 12,16,20,24,28 C, E, N (E) Linear C-P ±10 % (12) - 2.5 K (20) - 100 K F Single Flatted 1/8 ” (3.18 mm) D 24 C, N (13) - 5 K (22) - 250 K G Dual Concentric Plain 1/4 ” (6.35 mm) D - 1/8 ” (3.18 mm) D 36,40 A, J (15) - 10 K (23) - 500 K Outer Operates Section 1 (16) - 20 K (25) - 1 M K Dual Concentric Plain 1/8 ” (3.18 mm) D - 5/64 ” (1.98 mm) D 32,36 C, N (17) - 25 K (C) CW Audio Cermet ±10 % (10) - 1 K (18) - 50 K Outer Operates Section 1 (D) CW Audio C-P ±20 % (12) - 2.5 K (20) - 100 K L Dual Concentric Plain 1/4 ” (6.35 mm) D - 1/8 ” (3.18 mm) D 36,40 A, J (F) CCW Audio Cermet ±10 % (13) - 5 K (22) - 250 K Outer Operates Section 1/2 (G) CCW Audio C-P ±20 % (15) - 10 K (23) - 500 K M Dual Concentric Plain 1/8 ” (3.18 mm) D - 5/64 ” (1.98 mm) D 32,36 C, N (S) CW Audio C-P ±10 % (17) - 25 K (25) - 1 M Outer Operates Section 1 (T) CCW Audio C-P ± 10 % N Dual Concentric Plain 1/4 ” (6.35 mm) D - 1/8 ” (3.18 mm) D 36,40 A, J Outer Operates Section 1/2/3 Boldface features are Bourns standard options. P Dual Concentric Plain 1/8 ” (3.18 mm) D - 5/64 ” (1.98 mm) D 32,36 C, N All others are available with higher minimum order Outer Operates Section 1/2 R Single Slotted 6 mm D 16,19,22,50 R, S quantities. T Single Slotted 4 mm D 10, 13, 22 U V Dual Concentric Plain 6 mm D - 3 mm D 30, 42 R Outer Operates Section 1 REV. 11/11 SpeciŢ cations are subject to change without notice. Customers should verify actual device performance in their speciŢ c applications

Frequently asked questions

What makes Elite.Parts unique?

chervon down
At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

What kind of warranty will the 85A2A-B28-B15/R57L have?

chervon down
Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Which carriers does Elite.Parts work with?

chervon down
Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Will Elite.Parts sell to me even though I live outside the USA?

chervon down
Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

I have a preferred payment method. Will Elite.Parts accept it?

chervon down
All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

Why buy from GID?

quality

Quality

We are industry veterans who take pride in our work

protection

Protection

Avoid the dangers of risky trading in the gray market

access

Access

Our network of suppliers is ready and at your disposal

savings

Savings

Maintain legacy systems to prevent costly downtime

speed

Speed

Time is of the essence, and we are respectful of yours

What they say about us

FANTASTIC RESOURCE

star star star star star

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

star star star star star

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

star star star star star

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

star star star star star

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

star star star star star

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

star star star star star

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Related Products

Common Mode Choke

Common Mode Choke

Common Mode Choke

Common Mode Choke

Common Mode Choke

Common Mode Choke