6574S-555-202 - BOURNS

Description

Bourns 6574S-555-202 Potentiometer

Part Number

6574S-555-202

Price

Request Quote

Manufacturer

BOURNS

Lead Time

Request Quote

Category

PRODUCTS - 6

Specifications

+125 °C

0 watt

+70 °C

2 watts

Effective Electrical Angle

350 ° ±2 °

End Voltage

0.1 % maximum (0.2 % at 2 K ohms, 0.4 % at 1 K ohms)

Independent Linearity

±0.25 %

Insulation Resistance (500 VDC)

1,000 megohms minimum

IP Rating

IP 40

Load Life

1,000 hours, 1.5 watts

Operating Temperature Range

-40 °C to +125 °C

Output Smoothness

0.1 %

Resolution

Essentially infinite

Rotational Life (No Load)

25,000,000 shaft revolutions

Sea level

1,000 VAC minimum

Standard Resistance Range

1 K to 100 K ohms

Storage Temperature Range

-65 °C to +125 °C

Temperature Coefficient Over Storage Temperature Range

±500 ppm/°C maximum

Total Resistance Shift

±10 % maximum
±2 % maximum

Total Resistance Tolerance

±10 %

Vibration

15 G

Wiper Bounce

0.1 millisecond maximum

Features

Gangable up to 10 cups
Non-standard features and specifications available
Servo mount style
Shaft supported by front and rear precision ball bearings

Datasheet

Bourns-6574S-555-202-potentiometr-datasheet1-2057747463.pdf

106 KiB

Download

Extracted Text

Features ■ Servo mount style ■ Shaft supported by front and rear precision ball bearings ■ Non-standard features and speciŢ cations available ■ Gangable up to 10 cups 6574 - Precision Potentiometer 1 Electrical Characteristics Product Dimensions Standard Resistance Range ................................................................................... 1 K to 100 K ohms 6.35 Total Resistance Tolerance .........................................................................................................±10 % MIN. (.250) Independent Linearity ..............................................................................................................±0.25 % 6.34 + .000/- .007 Effective Electrical Angle ...................................................................................................... 350 ° ±2 ° DIA. (.2497+.0000/-.0003) End Voltage ............................................... 0.1 % maximum (0.2 % at 2 K ohms, 0.4 % at 1 K ohms) Output Smoothness ....................................................................................................................0.1 % .38 X 45 10 Dielectric Withstanding Voltage (MIL-STD-202, Method 301) (.015) CHAMFER Sea Level ..........................................................................................................1,000 VAC minimum 51.0 Power Rating (Voltage Limited By Power Dissipation or 350 VAC, Whichever is Less) (2.000) 47.63 +.000/ - .025 DIA. +70 °C....................................................................................................................................2 watts (1.875+.000/-.001) +125 °C................................................................................................................................... 0 watt Insulation Resistance (500 VDC) .................................................................1,000 megohms minimum Resolution ...............................................................................................................Essentially inﬁ nite 1.57 (.062) 2.36 1 Environmental Characteristics (.093) 2.03 MIN. Operating Temperature Range ................................................................................ -40 °C to +125 °C (.080) Storage Temperature Range ................................................................................... -65 °C to +125 °C 15.24 .787 15.9 .80 Temperature Coefﬁ cient Over Storage Temperature Range ..........................±500 ppm/°C maximum (.600 .031) (5/8 1/32) Vibration ........................................................................................................................................15 G Wiper Bounce .......................................................................................... 0.1 millisecond maximum Total Resistance Shift ..............................................................................................±2 % maximum Shock ............................................................................................................................................60 G 1 15 15 Wiper Bounce .......................................................................................... 0.1 millisecond maximum 3 3 Load Life ............................................................................................................1,000 hours, 1.5 watts 3 Total Resistance Shift ............................................................................................±10 % maximum Rotational Life (No Load) .........................................................................25,000,000 shaft revolutions 2 Total Resistance Shift ............................................................................................±10 % maximum 90 MAX. Moisture Resistance (MIL-STD-202, Method 103, Condition B) Total Resistance Shift ............................................................................................±10 % maximum IP Rating .......................................................................................................................................IP 40 29.59 (1.165) 1 Mechanical Characteristics MAX. Mechanical Angle ...............................................................................................................Continuous Torque (Starting & Running) ............................................................0.53 N-cm (0.75 oz.-in.) maximum Shaft Runout .............................................................................................. 0.025 mm (0.001 in.) T.I.R. Shaft End Play .............................................................................................. 0.08 mm (0.003 in.) T.I.R. TOLERANCES: EXCEPT WHERE NOTED Shaft Radial Play .......................................................................................... 0.08 mm (0.003 in.) T.I.R. .51 .13 Pilot Diameter Runout ................................................................................ 0.025 mm (0.001 in.) T.I.R. DECIMALS: .XX .XXX (.02), (.005) Lateral Runout .............................................................................................. 0.08 mm (0.003 in.) T.I.R. FRACTIONS: 1/64 Backlash ....................................................................................................................... 0.1 ° maximum MM DIMENSIONS: Weight ........................................................................................................................................ 89 gm (IN.) Terminals ....................................................................................................... Side exit turret terminals Soldering Condition Manual Soldering ............................... 96.5Sn/3.0Ag/0.5Cu solid wire or no-clean rosin cored wire WIPER 2 370 °C (700 °F) max. for 3 seconds Wave Soldering........................................................ 96.5Sn/3.0Ag/0.5Cu solder with no-clean ﬂ ux CCW CW 1 3 260 °C (500 °F) max. for 5 seconds CLOCKWISE Wash processes ................................................................................................. Not recommended Marking ................................ Manufacturer’s name and part number, resistance value and tolerance, linearity tolerance, wiring diagram, and date code. Recommended Part Numbers Ganging (Multiple Section Potentiometers) .............................................................. 10 cup maximum Hardware ........................................................................................................... No hardware included Part Number* Resistance (Ω) 1 6574S-1-102 1,000 At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted. 6574S-1-502 5,000 6574S-1-103 10,000 BOLDFACE LISTINGS ARE IN STOCK AND READILY AVAILABLE THROUGH DISTRIBUTION. FOR OTHER OPTIONS CONSULT FACTORY. REV. 08/10 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex SpeciŢ cations are subject to change without notice. Customers should verify actual device performance in their speciŢ c applications. *RoHS COMPLIANT

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products