Manufacturers
BOSER HS-6011
Description
BOSER HS-6011 CPU Board with Pentium II/III Support, PC/104 Expansion, USB, COM, Parallel, RS-422/485, VGA, LAN
Part Number
HS-6011
Price
Request Quote
Manufacturer
BOSER
Lead Time
Request Quote
Category
SINGLE BOARD COMPUTERS » FULL-SIZE PICMG 1.0 CPU CARD
Specifications
Board Size
33.6 x 12.1 cm
Board Type
Full Size
Bus Interface
PICMG Bus
Chipset
Intel 82443BX
CMOS
DS12C887 or equivalent device
CPU
Intel Pentium II/III 233~700 MHz CPU
CPU Temp. Alarm
Beeping when CPU temperature exceeds heating limits
CPU Temp. Monitor
LM75 or equivalent device.
DiskOnChip
Supporting memory size of up to 288MB
DMA channels
7
FDD
Supports up to two floppy disk drives
FUSE
Automatically resumes poly switch resettable fuse
I/O Chipset
Winbond W83977
IDE
Four IDE disk drives supporting ATA/33 with transfer rate up to 33MB/sec
Interrupt Levels
15
IR
One IrDA TX/RX header
Keyboard
PS/2 6-pin Mini DIN or 5-pin connector
LAN
Intel 82558 100 Base-TX LAN
Max Power Consumption
+5V@6.2A, +12V@120mA, -12V@50mA
Memory
Two DIMM sockets providing up to 512MB
Mouse
PS/2 6-pin Mini DIN
Parallel
One enhanced bi-directional parallel port supporting SPP/ECP/EPP
Power Voltage
+5V, +12V, -12V
Processor
Intel Pentium III
Serial Port
16C550 UART-compatible RS-232/422/485 x 1 and RS-232 x 1 serial ports with 16 byte FIFO
USB
Two ports
VGA
C&T 69000 with 2MB supporting CRT/Panel displays up to 1280 x 1024 at 256 colors
Features
- Fast PCI ATA/33 controller supporting 4 IDE disk drives
- Intel Pentium II/III 233~700MHz CPU
- Onboard C&T 69000 CRT/Panel display controller
- Onboard Intel 82558 100 BaseTX LAN
- Onboard Winbond W83977 super I/O chipset
- PnP I/O address & IRQ selection
- Two DIMM sockets with a max. capacity of 512MB
Datasheet
Extracted Text
Specifications are subject to change without notice. HS-6011 R Pentium II/III Slot 1 Full-size Board with VGA & LAN Parallel IDE RS-422/485 Panel FDD DIMM Socket CRT/Panel COM 1 LAN USB FAN RS-232/422/485 COM 2 5-pin Keyboard PC/104 RJ-45 C&T 69000 Intel 82558 IrDA Internal CRT USB PS/2 Mouse DOC CRT 5-pin Power In DiskOnChip WDT Intel 82443BX PC/104 CTA PS/2 Keyboard Slot 1 CTM 4-pin Power In DS12C887 Award BIOS Intel 82371 Features Specifications R R R R * Mouse: PS/2 6-pin Mini DIN Intel Pentium II/III 233~700MHz * CPU: Intel Pentium II/III TM TM * DiskOnChip : DiskOnChip CPU 233~700MHz CPU socket supporting memory sizes of Two DIMM sockets with a * Bus Interface: PICMG Bus up to 288MB maximum capacity of 512MB * Memory: Two DIMM sockets * BIOS: Award PnP Flash BIOS Fast PCI ATA/33 controller providing up to 512MB R * Watchdog Timer: Sets 1, 2, 10, supporting four IDE disk drives * Chipset: Intel 82443BX 20, 110, 220 seconds activity PnP I/O address & IRQ selection * I/O Chipset: Winbond W83977 trigger with Reset or NMI Onboard Winbond W83977 super * VGA: C&T 69000 with 2MB memory * CMOS: DS12C887 or equivalent I/O chipset supporting CRT/Panel displays up device Onboard C&T 69000 CRT/Panel to 1280 x 1024 at 256 colors * DMA Channels: 7 display controller * IDE: Four IDE disk drives supporting R * Interrupt Levels: 15 Onboard Intel 82558 100 Base- ATA/33 with transfer rate up to * Fuse: Automatically resumes poly TX LAN 33MB/sec switch resettable fuse * FDD: Supports up to two floppy disk * Power Voltage: +5V, +12V, -12V drives * Maximum Power Consumption: * Parallel: One enhanced bi- +5V@6.2A,+12V@120mA, directional parallel port supporting -12V@50mA SPP/ECP/EPP R * Operating Temperature: 0~60 C * LAN: Intel 82558 100 Base-TX * CPU Temperature Alarm: Beeping LAN alarm when CPU temperature * Serial Port: 16C550 UART- exceeds heating limits compatible RS-232/422/485 x 1 and * CPU Temperature Monitor: LM75 RS-232 x 1 serial ports with 16byte or equivalent device FIFO * Board Size: 33.6 x 12.1 cm * PC/104: PC/104 connector for 16bit ISA Bus Ordering Guide * IR: One IrDA TX/RX header HS-6011 * USB: Two USB ports PII/PIII Slot 1 PICMG SBC with * Keyboard: PS/2 6-pin Mini DIN or CRT/Panel, LAN 5-pin connector BOSER Technology Co., Ltd. 15F-6, No. 77, Hsin Tai Wu Road, Sec. 1 Hsichih, Taipei Hsien 221 Taiwan TEL : 886-2-26983333 FAX : 886-2-26983300 http://www.boser.com.tw http://www.isb.com.tw E-Mail:webmaster@boser.com.tw Architectural Expertise Beyond IPC
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the HS-6011 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods