© 2003. All rights reserved. Black Box Corporation. Black Box Corporation • 1000 Park Drive • Lawrence, PA 15055-1018 • Tech Support: 724-746-5500 • www.blackbox.com • e-mail: info@blackbox.com AUI TO BNC, UTP, OR 10BASE-FL TRANSCEIVERS Link your Ethernet devices to ThinNet, UTP, or fiberoptic networks with these handy transceivers. Key Features eed a way to connect Ethernet 10BASE-T segments can be up to All three models feature an Ndevices to 10BASE2, 10BASE- 328 ft. (100 m) long. The LE1602A SQE (Signal Quality Error) switch Install the transceiver T, or 10BASE-FLcabling?Choose meets the standards for 10BASE- that enables or disables Signal either directly on an our inexpensive AUI transceivers. T Ethernet. Quality Error (heartbeat). SQE Ethernet device via the The AUI to BNC Transceiver Or connect your Ethernet must be enabled when AUI port or using an (LE1601A) lets you connect an device to a multimode 10BASE-FL connecting the transceiver to a AUI cable. Ethernet device (such as a LAN fiberoptic network or device using LAN card, bridge, or router. This card installed in a PC, or a bridge, the AUI to 10BASE-FL Transceiver test must be disabled when Models available for router, hub, or repeater) to Thin (LE1603A). The 10BASE-FL connecting to a hub or repeater. ThinNet, UTP, or Ethernet coaxial cable. It extends segments can be up to 1.2 miles The BNC and UTP models have a fiberoptic connections. coaxial cable segments up to (2 km) long. The LE1603A fits the 2-position slide switch that sets 606.8 ft. (185 m) without a requirements of the 10BASE-FL SQE. On the fiber model, SQE is SQE (Signal Quality repeater. This transceiver Ethernet standard. set via a 4-position DIP switch. Error) switch enables complies with the 10BASE2 On the AUI side of the LEDs tell you network status at or disables SQE specification for Thin Ethernet transceivers, you can use a a glance. The AUI to 10BASE-FL (heartbeat) test. networks. standard AUI cable (50 ft., or Transceiver also features a link 15.2 m, long) to connect to the integrity test that automatically If you want to attach your Link integrity test on Ethernet device, or you can checks fiberoptic cables. Ethernet device to 10BASE-T the fiber model checks directly mount the transceiver to unshielded twisted-pair (UTP) fiber cables. the DTE. cabling, order the AUI to UTP Transceiver (LE1602A). The Compact design. 5/14/2003 #10418 1 Ethernet LAN Attaching an AUI card Fiberoptic segment Ethernet to 10BASE-FL connects here repeater Transceiver to AUI port an Ethernet card or repeater. AUI port AUI to 10BASE-FL AUI to 10BASE-FL Transceiver Fiberoptic segment Transceiver (SQE switch connects here (SQE switch disabled) enabled) Specifications Standards: User Controls: LE1601A, LE1602A: Indicators: LE1601A: (2) LEDs: Relative Humidity: Operating: 8 to LE1601A: IEEE 802.3 10BASE2; (1) SQE slide switch; (1) Power, (1) SQE; 80%, noncondensing; LE1602A: IEEE 802.3 10BASE-T; LE1603A: (1) 4-position DIP LE1602A: (5) LEDs: (1) Power, Storage: 5 to 98%, LE1603A: IEEE 802.3 10BASE-FL switch (SQE, Link Alert, Link, (1) Link, (1) Transmit, noncondensing and Full Duplex) (1) Receive, (1) Collision; Maximum Cable Segment Power: From the AUI interface LE1603A: (6) LEDs: (1) Power, Distance: All models: AUI port: Connectors: LE1601A: (1) DB15 AUI Size: LE1601A: 0.8"H x 1.6"W x 3.8"D (1) Link, (1) Transmit, Up to 50 ft. (15.2 m); M, (1) BNC F; (2 x 4.1 x 9.7 cm); (1) Receive, (1) Collision, LE1601A: Coaxial: Up to 606.8 ft. LE1602A: (1) DB15 AUI M, LE1602A: 0.8"H x 1.6"W x 3.2"D (1) Full Duplex (185 m); (1) RJ-45; (2 x 4.1 x 8.2 cm); ® LE1602A: UTP: Up to 328 ft. LE1603A: 1) DB15 AUI M, (2) ST Temperature Tolerance: LE1603A: 0.8"H x 1.6"W x 3.4"D (100 m); Operating: 32 to 122°F (2 x 4.1 x 8.6 cm) LE1603A: Fiber: Up to 1.2 mi. (0 to 50°C); Weight: 0.2 lb. (<0.1 kg) (2 km) Storage: -40 to +212°F (-40 to +100°C) Speed: 10 Mbps Ordering Information What the Package Includes ITEM CODE • (1) AUI to BNC, UTP, or 10BASE-FL Transceiver AUI to BNC Transceiver ...........................................LE1601A • (1) BNC “T” connector (included with LE1601A only) AUI to UTP Transceiver ............................................LE1602A • (1) Users’ manual AUI to 10BASE-FL Transceiver ...............................LE1603A You might also need… Ethernet Transceiver Cable (Office Environment) Stranded Copper Connectors, Double Shielded.......................................................LCN215 ® ThinNet Cable (NEC CL2 & CL2P), PVC................LCN300 ® GigaBase 350 CAT5 Patch Cable with Snagless Boots, 350-Mhz, 24 AWG, RJ-45, 4-Pair, 568-B, PVC, Straight-Pinned.....EVNSL81 Ceramic Terminated Multimode Fiber Optic Cable, ST–SC, Duplex, Riser..........EFN4010 2