BERMAD Irrigation S-Series 3-Way Solenoid with Hydraulic Base S-400-3W The BERMAD S-400-3W is a compact 3-Way Solenoid Pilot Valve that can control valves independently or in combination with other control circuit accessories. It excels in its low power consumption and low sensitivity to dirt and voltage variations. The Model S-400-D-3W-BB, due to its internal diode rectifier, provides remarkable high switching power. The Model S-400-R-3W-BB is lightning-resistant. The hydraulic base features a manual override and consists of a bracket for attaching to the valve or to a solenoid manifold. Features and BeneŢts ■ Advanced Construction Materials, Unique Plastic Casing ❏ Proven pressure, voltage and weather resistance ❏ Highly durable in corrosive environments ❏ High mechanical strength ❏ Protection Class- IP68; NEMA Type 6D ■ Superb Internal Design and Finish ❏ Reliable operation under dirt loaded water ❏ Low sensitivity to voltage variations ❏ 24VAC Coils Suite both 50Hz & 60Hz networks ■ Low Power Consumption ❏ Low coil heating and sediment damage ❏ Saves wires and infrastructures costs ❏ Suites all Continuous Current Controllers on the market ■ Hydraulic Base with Installation Bracket ❏ High flow capacity quickens valve response ❏ No dirt sedimentation inside solenoid actuator ❏ Manual override open and close ❏ Simple installation to valve or manifold ■ Simple Installation, Operation and Maintenance ■ Reliable and Durable Product that Bears the Stamp of BERMAD Quality Applications ■ Solenoid controlled on/off valves ■ Solenoid controlled pressure and flow control valves ■ Multiple valve systems ■ Systems distanced from control center ■ Solenoid manifolds in irrigation heads ■ Systems in areas liable to lightning storms (S-400-R) BERMAD Irrigation S-400-3W S-Series SpeciŢcations 1 Connections: /8” NPT 1- Vent 2- Valve Control Chamber (Common) 3- Pressure Valve Anchoring: By Screws (Self Tapping #8) at the Solenoid base Leads: 2 leads x 0.32 mm2; 28 AWG x 80 cm; 31½ inch Manual Pressure Rating: 10 bar; 150 psi Override Handle Pressure Range: 0-10 bar; 0-150 psi Orifice Diameter: Inlet- 2.2mm Exhaust- 1.8mm Flow Factor: KV-0.12 m3/h @ 1bar ΔP CV- 0.14 GPM @ 1psi ΔP Materials: Actuator Casing: Nylon Seals: NBR Bracket Wetted parts: Stainless steel 400 and polyamide Base: Nylon (Optional: Brass) weight: 0.17 kg; 0.37 ibs. Electrical Data: Actuator Type Cable Color Power Current (Amp) Coil (Watt) Resistance ohm@20°C; Inrush Hold 68°F S-400-24VAC-D-NO Red/Blue 3.5 0.20 0.20 * S-400-24VAC-D-NC Red/Blue 3.5 0.20 0.20 * S-400-24VAC-R-NO Red/Red 3.5 0.60 0.30 14 S-400-24VAC-R-NC Red/Red 3.5 0.60 0.30 14 S-400-24VDC-NO Black/Black 4.2 0.17 0.17 135 S-400-12VDC-NO Blue/Blue 4.0 0.33 0.33 36 * Coil resistance in these coils cannot be measured How to Order Please Specify the requested Solenoid as follow: (a) (b) (c) ■ H 2-wires, 3-Way Continuous Current Solenoid with ydraulic Base Model: S-400-3W-______ -______ -______ -BB (a) Mark D or R, Only for AC Models (b) Mark desired Voltage: 24V/AC, 24V/DC, 12V/DC (c) Mark desired Normally De-Energised Function: NO (Open) or NC (Closed) To Order installed and tested Solenoid Manifold Please Specify: (a) (d) (e) (f) ■ E S-400-3W-BB Solenoid manifold, BERMAD Model: -400-______ -______ -______ -______ (a) Mark D or R, Only for AC Models (d) Specify desired quantity of Solenoids (2-10 Solenoids can be ordered) (e) Mark desired Voltage: 24V/AC, 24V/DC, 12V/DC (f) Mark desired Normally De-Energised Function: NO (Open) or NC (Closed) info@bermad.com • www.bermad.com The information herein is subject to change without notice. BERMAD shall not be held liable for any errors. All rights reserved. © Copyright by BERMAD. PCSAE40-3W 05 3 86 mm ; 3 /8”