Ethernet Ethernet Ethernet TCP/IP TCP/IP TCP/IP BX9000 BX9000 BX9000 P Power ower-LEDs -LEDs K-bus K-bus Fieldbus Fieldbus connection connection SSB SSB connection connection Bus Bus Coupler Coupler supply supply J Joystick oystick switch switch LCD LCD display display for for diagnosis diagnosis Input Input for for Serial Serial interface interface power power contacts contacts P Power ower contacts contacts Labelling Labelling ar area ea BX9000 | Ethernet TCP/IP Bus Terminal Controller The BX9000 Bus Terminal Controller has an Ethernet slave/master interface. The controller has automatic baud rate detection up to 100 Mbaud. The address can optionally be entered via DHCP, BootP, ARP or with the joystick switch. Up to 2 kbytes of input and 2 kbytes of output can be exchanged with the controller. The ModbusTCP and the ADS/TCP and ADS/UDP protocols are implemented. One unit consists of the BX9000 Bus Terminal Controller with up to 64 Bus Terminals and a bus end terminal. With the terminal bus extension system, the connection of up to 255 Bus Terminals is possible. The controller is programmed via the COM1 or via the Ethernet interface. In terms of their equipment and performance, the BX series Bus Terminal Controllers are positioned between the BC series Bus Terminal Controllers and the CX series Embedded PCs. The main features distinguishing BC and BX are the larger memory and the expanded interfaces of the BX. Additionally, two serial interfaces are integrated for programming and for the connection of further serial devices. The device itself comprises an illuminated LC display with two lines of 16 characters each, a joystick switch and a real-time clock. Further peripheral devices, e.g. displays, can be connected via the integrated Beckhoff Smart System Bus (SSB). Controller for distributed signal processing Like for all other Beckhoff controllers, the TwinCAT automation software is the basis for parameterisation and programming. The BX devices are programmed according to the powerful IEC 61131-3 standard in the programming languages IL, FBD, LD, SFC or ST. Users therefore have the familiar TwinCAT tools available, e.g. the PLC programming interface, the System Manager and TwinCAT Scope. Data is exchanged optionally via the serial port (COM1) or via the Ethernet interface. The configuration is also carried out using TwinCAT. The fieldbus interface, the SSB bus and the real-time clock can be configured and parameterised via the System Manager. The System Manager can read all connected devices and Bus Terminals. After the parameterisation, the configuration is saved on the BX via the serial interface and can be accessed again later. PLC data Ethernet TCP/IP | BX9000 Programming via TwinCAT and programming interface or Ethernet Program memory 256 kbytes Data memory 256 kbytes Remanent data 2 kbytes Persistent data 1 kbyte Run-time system 1 PLC task PLC cycle time approx. 1 ms for 1,000 instructions (without I/O cycle, K-bus) Programming languages IEC 61131-3 (IL, LD, FBD, SFC, ST) Online change yes Up/down load code yes/yes BECKHOFF New Automation Technology We reserve the right to make technical changes. Technical data BX9000 Number of Bus Terminals 64 (255 with K-bus extension) Max. number of bytes fieldbus 512 byte input and 512 byte output Max. number of bytes process 2,048 byte input and 2,048 byte output image Digital peripheral signals 2,040 inputs/outputs Analog peripheral signals 512 inputs/outputs Protocol TwinCAT ADS, Modbus TCP Data transfer rates 10/100 Mbaud, automatic recognition of the transmission rate Bus interface RJ 45 Serial interface COM1: 1 x RS232, COM2: 1 x RS232 or RS485 SSB CANopen-based subsidiary bus system for the connection of further peripheral devices Diagnostics LED 2 x power supply, 2 x K-bus Display FSTN display with 2 x 16 characters for diagnosis or own texts, illuminated Switch joystick switch for parameterisation and diagnosis Clock battery-powered real-time clock for time and date Power supply 24 V DC (-15 %/+20 %) Input current 140 mA + (total K-bus current)/4, 500 mA max. Starting current 2.5 x continuous current Current supply K-bus 1,450 mA Power contacts 24 V DC max./10 A max. Electrical isolation 500 V (power contact/supply voltage) Weight approx. 250 g Operating/storage temperature 0…+55 °C/-25…+85 °C Relative humidity 95 %, no condensation Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27/29 EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4 Protect. class/installation pos. IP 20/variable Approvals CE, UL Accessories   TwinCAT PLC programming system conforms to IEC 61131-3 FC90xx-00xx PC Fieldbus Cards with PCI interface Ordering information Description BX9000 Ethernet Bus Terminal Controller for up to 64 Bus Terminals (255 with K-bus extension) BK9xx0 Ethernet Bus Coupler CX8090 Ethernet Embedded PC BECKHOFF New Automation Technology We reserve the right to make technical changes.