Elite.Parts

Description

Part Number

ECM-5610

Price

Request Quote

Manufacturer

AVALUE

Lead Time

Request Quote

Category

5.25" SINGLE BOARD COMPUTER

Specifications

AC97 Codec

AD1819B

Audio Chipset

VT82C686B

Audio Controller

AC97 2.0 compliant interface, Multi-stream Direct Sound and Direct Sound 3D acceleration

Audio Interface

Microphone in, Line in, CD audio in, Line out, Speaker out

BIOS

Award 256 KB Flash BIOS

Board Size

8"(L) x 5.75"(W) (203 mm x 146 mm)

CPU

Supports Intel FC-370 Pentium III / Celeron (with system bus frequencies of 66/100/133 MHz)

CPU Socket

Intel FC-370, Socket 370

Display Chipset

SMI Lynx3DM SM 721, high performance 128-bit GUI, 3D engine

Display Interface

AGP 2X, Accelerator Graphics Ports 1.0 compliant

Display Memory

4 MB of SGRAM frame buffer on Lynx3DM SM 721G4 (ECM-5610/L), 8 MB on Lynx3DM SM 721G8 (optional)

Display Type

Simultaneously supports CRT and flat panel (TFT & DSTN Color) displays

Enhanced IDE

Supports two IDE devices. Supports Ultra DMA/100 mode with data transfer rate up to 100 MB/sec.

Ethernet Chipset

Dual Intel 82559ER PCI-bus

Ethernet controllers onboard (ECM-5610 only) Ethernet Interface

PCI 100/10 Mbps, IEEE 802.3U compatible

Expansion Interface

PC/104 Connector - One16-bit 104-pin connector onboard; PCI Slot - One 32-bit PCI slot onboard

FDD Interface

Supports up to two floppy disk drives, 5.25" (360 KB and 1.2 MB) and/or 3.5" (720 KB, 1.44 MB, and 2.88 MB)

I/O Chipset

VT82C686B / Winbond W83977 EF-AW

IR Interface

Supports one IrDA Tx/Rx header

KB/Mouse Connector

8-pin (4 x 2) connector supports PS/2 keyboard and mouse

Memory

Onboard one 168-pin DIMM socket supports up to 512 Mbytes SDRAM

Operating Temperature

32 to 140° F (0 to 60° C)

PanelLink Interface(Optional)Chipset

Sil 164 PanelLink Digital Transmitter; Scalable Bandwidth - Ranging from 25 ~ 112 MHz (VGA ~ SXGA) 24/48-bit one/two pixel per clock

Parallel Port

One bi-directional parallel port. Supports SPP, ECP, and EPP modes

Power Management

Supports ATX power supply. Supports PC97, LAN wake up and modem ring-in functions. I/O peripheral devices support power saving and doze/standby/suspend modes. APM 1.2 compliant

Power Supply Voltage

AT or ATX type, +5V and +12V

Processor

Intel Pentium III

Remote Boot-ROM

Available with optional Intel 82559 controller

Resolution

Up to 1024 x 768 @24 bpp

Serial Port

Three RS-232 and one RS-232/422/485 serial port. Ports can be configured as COM1, COM2, COM3, COM4, or disabled individually. (16C550 equivalent)

SSD Interface

One CF+ socket supports Type I/II Compact Flash memory devices

System Chipset

VIA Apollo Pro 133A, VT82C694X

TV Output Interface

Onboard header supports both RCA jack and S terminal

USB Connectors

One 5 x 2 header onboard supports dual USB ports

Video Capture Port

40-pin YUV direct video input port onboard

Watchdog Timer

Can generate a system reset. Software selectable time-out interval (32 sec. ~ 254 min., 1 min./step)

Weight

0.5 Kg

Features

1 IrDA port
1 Parallel
2 USB
4 COM
AGP 2X 3D Graphics Accelerator with YUV Video Input
Dual Flat Panel Interfaces
Dual Intel 82559ER 10/100Base-Tx Fast Ethernet
Integrated AC97 2.0 Sound Blaster Compatible Audio
NTSC/PAL TV Output
Optional 24-bit Panel Link Interface
PC/104 Expansion Connector
Supports Intel FC-370 Pentium III / Celeron CPUs with FSB up to 133 MHz
Supports Type I/II Compact Flash Storages
Ultra DMA/100 IDE Interface

Datasheet

ECM-561-881361020.pdf

269 KiB

Download

Extracted Text

Applied computing solutions Mini Modules Intel FC-370 Pentium III / Celeron Mini Module Features Supports Intel FC-370 Pentium III / Celeron CPUs with ❶ FSB up to 133 MHz Dual Intel 82559ER 10/100Base-Tx Fast Ethernet ❷ AGP 2X 3D Graphics Accelerator with YUV Video Input ❸ Dual Flat Panel Interfaces ❹ NTSC/PAL TV Output ➎ Integrated AC97 2.0 Sound Blaster Compatible Audio ➏ Ultra DMA/100 IDE Interface ❼ 4 COM / 2 USB / 1 Parallel / 1 IrDA port ❽ Supports Type I/II Compact Flash Storages ➒ PC/104 Expansion Connector ❿ Optional 24-bit Panel Link Interface ❿ Ordering Information • ECM-5610 Intel Pentium III / Celeron Mini Module with dual LCD interfaces, AGP 2X 3D graphics, AC97 Audio, & Dual 10/100Base-Tx Ethernet • ECM-5610L Intel Pentium III / Celeron Mini Module with dual LCD interfaces, AGP 2X 3D graphics, AC97 Audio, & Single 10/100Base-Tx Ethernet • ECM-5610-2DL • EES-5610 (page 7-3) Intel Pentium III / Celeron Mini Module with LCD interface, Intel FC-370 Pentium III / Celeron AGP 2D graphics, AC97 Audio, & Single 10/100Base-Tx Ethernet Mini PC with VGA, LCD, AC97 • ACC-56102-1 Audio, Compact Flash, 4 COMs, Cable kit for ECM-5610 series & Dual 10/100Base-Tx Ethernet 1-9 www .evalue-tech.com Applied computing solutions Specifications PanelLink Interface (Optional) General Functions Chipset: Sil 164 PanelLink Digital Transmitter CPU: Supports Intel FC-370 Pentium III / Celeron (with system bus frequencies of • • Scalable Bandwidth: Ranging from 25 ~ 112 MHz (VGA ~ SXGA) 24/48-bit one/two pixel 66/100/133 MHz) • per clock CPU Socket: Intel FC-370, Socket 370 • BIOS: Award 256 KB Flash BIOS • Chipset: VIA Apollo Pro 133A, VT82C694X Audio Interface • I/O Chipset: VT82C686B / Winbond W83977 EF-AW Chipset: VT82C686B • • Memory: Onboard one 168-pin DIMM socket supports up to 512 Mbytes SDRAM AC97 Codec: AD1819B • • Enhanced IDE: Supports two IDE devices. Supports Ultra DMA/100 mode with data transfer rate Audio Controller: AC97 2.0 compliant interface, Multi-stream Direct Sound and Direct Sound • • up to 100 MB/sec. 3D acceleration FDD Interface: Supports up to two floppy disk drives, 5.25" (360 KB and 1.2 MB) and/or 3.5" Audio Interface: Microphone in, Line in, CD audio in, Line out, Speaker out • • (720 KB, 1.44 MB, and 2.88 MB) Parallel Port: One bi-directional parallel port. Supports SPP, ECP, and EPP modes • Ethernet Interface Serial Port: Three RS-232 and one RS-232/422/485 serial port. Ports can be configured as • Chipset: Dual Intel 82559ER PCI-bus Ethernet controllers onboard (ECM-5610 only) • COM1, COM2, COM3, COM4, or disabled individually. (16C550 equivalent) Ethernet Interface: PCI 100/10 Mbps, IEEE 802.3U compatible • IR Interface: Supports one IrDA Tx/Rx header • Remote Boot-ROM: Available with optional Intel 82559 controller • KB/Mouse Connector: 8-pin (4 x 2) connector supports PS/2 keyboard and mouse • USB Connectors: One 5 x 2 header onboard supports dual USB ports • SSD Interface Watchdog Timer: Can generate a system reset. Software selectable time-out interval • One CF+ socket supports Type I/II Compact Flash memory devices (32 sec. ~ 254 min., 1 min./step) • Power Management: Supports ATX power supply. Supports PC97, LAN wake up and modem • Expansion Interface ring-in functions. I/O peripheral devices support power saving and doze/standby/suspend modes. APM 1.2 compliant PC/104 Connector: One16-bit 104-pin connector onboard • PCI Slot: One 32-bit PCI slot onboard • Flat Panel/CRT Interface Mechanical and Environmental Chipset: SMI Lynx3DM SM 721, high performance 128-bit GUI, 3D engine • Display Memory: 4 MB of SGRAM frame buffer on Lynx3DM SM 721G4 (ECM-5610/L), 8 MB Power Supply Voltage: AT or ATX type, +5 V and +12 V • • on Lynx3DM SM 721G8 (optional) Operating Temperature: 32 to 140° F (0 to 60° C) • Display Type: Simultaneously supports CRT and flat panel (TFT & DSTN Color) displays Board Size: 8" (L) x 5.75" (W) (203 mm x 146 mm) • • Interface: AGP 2X, Accelerator Graphics Ports 1.0 compliant Weight: 0.5 Kg • • Resolution: Up to 1024 x 768 @24 bpp • Video Capture Port: 40-pin YUV direct video input port onboard • TV Output Interface: onboard header supports both RCA jack and S terminal • System Diagram 1-10 E-mail:sales@evalue-tech.com

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products