Embedded Power for Business-Critical Continuity Rev. 07.01.08 LPQ170 Series 1 of 4 LPQ170 Series 175 Watts Total Power: 110 - 175 Watts Input Voltage: 85-264 Vac 120-300 Vdc # of Outputs: Quad Electrical Specifications Input Special Features Input ra nge: 85-264 VAC; 120-300 VDC • Active power factor correction Frequency: 47-67 Hz • IEC EN61000-3-2 compliance Inrush current: 38 A max, cold start @ 25°C • Adjustable outputs on 1, 3 & 4 Efficiency: 75% typical at full load Remote sense on main output EMI filter: Meets FCC Class B conducted • Single wire current sharing CISPR 22 Class B conducted • Power fail and remote inhibit EN55022 Class B conducted • Built-in EMI filter VDE 0878 PT3 Class B conducted • Low output ripple Power Factor: 0.99 typical • Overvoltage protection • Overload protection 1.0 mA @ 50/60 Hz, 264 VAC input Safety ground • Thermal overload protection leakage current: • DC power good Output • 5 V standby output Maximum power: 110 W convection (75 W with cover) • Adjustable floating 4th output 85 W convection - LPQ173 • Optional cover (-C suffix) 175 W with 30 CFM forced air (130 W with cover - LPQ172) Adjustment range: 3.3 - 5.5V on main; -12 - 15V on 3rd output 3.3 - 25 V on 4th output - LPQ172 3.3 - 5.5 V on 4th output - LPQ173 Safety Hold-up time: 20 ms @175 W load at nominal line VDE 0805/EN60950 (IEC950) Overload protection: Short circuit protection on all outputs. Case overload protected UL UL60950 @ 110-145% above peak rating CB Certificate and report Overvoltage protection: Tracks outputs 1, 3 & 4; 15 to 35% CSA CSA 22.2-234 Level 3 Standby output: 5 V @ 200 mA regulated ±5% CE Mark (LVD) NEMKO EN 60950/EMKO-TUE Embedded Power for Business-Critical Continuity Rev. 07.01.08 LPQ170 Series Logic Control 2 of 4 TTL logic signal goes high 100 - 500 msec after V1 output; It AC power failure goes low at least 4 msec before loss of regulation Remote inhibit Requires contact closure to inhibit outputs Compensates for 0.5 V lead drop min. Will operate without Remote sense remote sense connected. Reverse connection protected. TTL logic signal goes high after main output is in regulation. It DC - OK goes low when there is a loss of regulation. Environmental Specifications Operating temperature: 0° to 50 °C ambient. Derate each output 2.5% per degree from 50° to 70 °C (except for -C version). Storage temperature: -40°C to +85°C Temperature coefficient: ±0.4% per °C Electromagnetic susceptibility: Designed to meet IE61000-4, -2, -3, -4, -5, -6, -8, -11, Level 3 Humidity: Operating; non-condensing 5% to 95% Vibration: Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances 0.75G peak 5Hz to 500Hz, operational MTBF demonstrated: >550,000 hours at full load and 25°C ambient conditions Ordering Information Maximum Maximum Load with Load with Ripple P/P Model Output Minimum Convection 30CFM 1 2 3 Number Voltage Load Cooling forced Air Peak Load Regulation (PARD) LPQ172 5 V (3.3 - 5.5 V) 0 A 15 A 30 A 32 A ±2% 50 mV 12 V 0 A 6 A 8 A 10 A ±3% 120 mV -12 V (-12 -15 V) 0 A 1.5 A 3 A 3.5 A ±3% <1% ±3.3-25 V 0.5 A* 2 A 5 A 5.5 A ±3% <50mV or 1% LPQ173 5 V (3.3 - 5.5 V) 0 A 10 A 24 A 26 A ±2% 50 mV 12 V 0 A 6 A 8 A 10 A ±3% 120 mV -12V (-12 -15 V) 0 A .2 A 3 A 3.5 A ±3% <1% 5 V (3.3 - 5.5 V) 0 A 10 A 24 A 26 A ±2% 50 mV 1. Peak current lasting <30 seconds with a maximum 10% duty cycle. 2. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10 μF in parallel with a 0.1 μF capacitor at rated line voltage and load ranges. 4. 4th output adjustable 3.3-25 V factory set at 5 V. 5. *Minimum loads are required when output set below 5 Volts 6. Remote inhibit resets OVP latch 7. LPQ173-C has no convection rating. Note: -C suffix added to the model number indicates cover option and is limited to 50 °C operation. Notes: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ±0.02”. 3. Specifications are for convection rating at factory settings unless otherwise stated. 4. Mounting screw maximum insertion depth is 0.12”. 5. Warranty: 2 year 6. Weight: 2 lb / 0.91 kg 0.88 2.50 (22.2) (63.5) 1.07 2.11 (27.2) (53.5) Embedded Power for Business-Critical Continuity Rev. 07.01.08 LPQ170 Series 3 of 4 Pin Assignments Mechanical Drawing Connector LPQ172 LPQ173 SK1 PIN 1 N/C V4 SWP LPQ173 LPQ172 V4 V1 PIN 2 5V Standby 5 V Standby TB4 TB2 SK2 SK1 TB2 PIN 3 N/C +V4 Sense 123456789 P251 SK3 PIN 4 V1 SWP V1 SWP 1 5 TB1 SK3 P252 PIN 5 Common Common 6 10 PIN 6 +V1 sense +V1 sense TB3 TB1 SK2 SK1 PIN 7 Sense common Sense common V2 N/C PIN 8 Remote inhibit Remote inhibit 1.50 V2 N/C (38.1) COM POK PIN 9 DC power good DC power good COM V3 0.75 SK4 COM 0.95 0.55 PIN 10 POK POK (19.0) (24.0) (14.0) 135 SK2 PIN 1,2 +12 V +12V PIN 3,4,5 Common Common PIN 6 -12 V -12V PIN 7 POK POK PIN 8 +3.3 V to +25 V (Float) N/C PIN 9 Common (Float) N/C SK3 TB-1, 3 COMMON COMMON TB-2 +5 V (3.3V to 5.5V) +5V (3.3V to 5.5V) TB-4 N/C +5V (3.3V to 5.5V) SK4 PIN 1 GROUND GROUND PIN 3 LINE LINE 6.61 7.4 8.5 (168.0) (188.0) (216.0) PIN 5 NEUTRAL NEUTRAL Mating Connectors (SK4) AC Input: Molex 09-50-8051 (USA) Molex 09-91-0500 (UK) PINS: 08-58-0111 (SK3) Main output: Molex series 19141-0058/0063 (SK2) Aux DC Output/Power fail: Molex 09-50-8091 (USA) SK2 SK1 SK3 Molex 09-91-0900 (UK) 4.25 PINS: 08-58-0111 (108.0) (SK1) Control Signals: Molex 90142-0010 (USA) PINS: 90119-2110 or Amp: 87977-3 PINS: 87309-8 Astec connector kit #70-841-015, includes all of above #6-32(8 PLACES) M3(8 PLACES) V3 O/P ADJ. V3 (-12V TO -15V7) V4 O/P ADJ. C F V4 (3V3-25V) V1 (3V3-5V7) V1 O/P ADJ. Embedded Power for Business-Critical Continuity Rev. 07.01.08 LPQ170 Series Americas 4 of 4 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 (760) 930 4600 Facsimile: +1 (760) 930 0698 Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Asia (HK) 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888 For global contact, visit: www.powerconversion.com techsupport.embeddedpower @emerson.com While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Computing Embedded Power Monitoring Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Services Surge Protection EmersonNetworkPower. com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2008 Emerson Electric Co. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Emerson Network Power :   LPQ172  LPQ172-C  LPQ173  LPQ173-C  70-841-015