Manufacturers
ARBOR TECHNOLOGY EmCORE-i741VL R1.0
Description
Arbor EmCORE-i741VL R1.0 CPU Board - 3.5 Form Factor Intel Pentium-M/Celeron-M up to 2.0GHz Mini-Board w/ CRT/LCD/ SVGA Display, TV-Out, Dual Mode Independant Dual Display, Intel 82856ET 10/100 LAN, PC/104-Plus Socket, 6 x USB 2.0 Ports & Audio Interfaces
Part Number
EmCORE-i741VL R1.0
Price
Request Quote
Manufacturer
ARBOR TECHNOLOGY
Lead Time
Request Quote
Category
PRODUCTS - E
Specifications
10/100(Fast) LAN
1 x Intel 82856ET Chipset 10/100 LAN
Additional Expansion
No
Additional I/O
No
Additional Onboard Storage
No
AGP Slot
No
Approximate Weight
1.5 lbs (0.68 kg)
Audio
Mic-in / Line-in / Line-out
Audio Chipset
Realtek ALC655A AC97 Codec
BIOS
Phoenix-AWARD PnP Flash BIOS
Chipset
Intel 852GM + ICH4 chipset
Compact Flash
1 x Compact Flash Type II
CPU
Intel Pentium-M/Celeron-M 2.0GHz/ Ultra Low Voltage Celeron M 600MHz/ Ultra Low Voltage Celeron M 1.0GHz / Ultra Low Voltage Pentium M 1.4GHz CPU
CPU Socket
Embedded
Dimensions
5.7" X 4.0" (145 mm X 102 mm)
Disk On Chip (DOC)
No
Display Port
No
Dual Channel Memory Support
No
DVI
Support up to 1280 x 1024
ECC Memory Supported
No
Floppy Port
Support 1 Floppy disk drive, shared with LPT
Form Factor
3.5" Embedded Controller
FSB
533 MHz
Gigabit LAN Ports
No
GPIO Port
No
HDMI
No
HDTV-Out
No
IDE Controller
1 x EIDE Port supports up to two ATAPI devices – Ultra ATA transfer rate of 33 MB/s
IEEE 1394 (Firewire) Port
No
IrDA Port
No
ISA Slot
No
LPT (Parallel) Port
One Port supports SPP/EPP/ECP modes
LVDS
LCD support 18/36-bit LVDS UXGA up to 1600 x 1200
Maximum Memory Supported
1GB
Memory Slots
1 x 200-pin SODIMM
Memory Standard
DDR SDRAM
Mini-AGP Slot
No
Mini-PCI Socket
No
Onboard Memory
No
Operating Temperature
0 ~ 60° C (32 ~ 140° F)
PC/104
1 x PC/104 Plus
PC/104 Plus
No
PCI Express Mini-Card (Mini-PCIe)
No
PCI Slot
No
PCIe Socket
No
Power Connector
1 X 10-pin ATX
Power Consumption
TBD
Power Management
APM
Processor
Intel Pentium M
PS/2 Port
1 x PS/2 port for Keyboard and mouse
Real Time Clock
Chipset integrated RTC with onboard lithium battery
Relative Humidity
0% to 95%, non-condensing
Serial (COM) Port
2 x RS-232 ports
Serial ATA (SATA)
No
SPDIF
No
Storage Temperature
0 ~ 60° C (32 ~ 140° F)
Super I/O Chipset
No
TTL
No
TV-Out
NTSC/PAL up to 1024 x 768
USB Port
6 x USB 2.0 Ports
VGA
1 x VGA
Video Chipset
Intel 852GM Extreme Graphics 2 engine
Video Memory
64MB UMA Video Memory shared with System Memory
Video Resolution
No
Watchdog Timer
255-Level Reset
Datasheet
Extracted Text
EmCORE-i741 3.5" Intel Pentium M Socket 478 Miniboard with PC/104 Plus, CRT, LCD, DVI, TV-out and LAN Features • Intel Socket 478 Pentium M/Celeron M Processor with 400MHz FSB • Support DDR 200/266 up to 1GB DDR SDRAM • Support 18/36 bit LVDS, DVI, TV-out and CRT • Support Dual Display (Independent Display) • Support 6 x High Speed USB 2.0 Ports • Support CompactFlash Type I/II Socket up to 4GB • 1 x PC/104 Plus Interface • 6 x RS-232 Serial Ports (Optional) System Display Socket 478 for Intel Pentium M/Celeron M processor up to Intel 852GM Extreme Graphics2 Engine up to 64MByte CPU Graphics Chipset 1.8GHz FSB400MHz UMA Video RAM Onboard LV/ULV BGA type Pentium M/Celeron M processor CRT support up to 2048 x 1536 Graphics Interface CPU on die LVDS support 18/36 bit up to 1600 x 1200 Cache 1 x 200-pin SO-DIMM up to 1GB DDR SDRAM DVI support 12 bit up to 1280 x 1024 Memory Chipset Intel 852GM + Intel ICH4 TV-out support NTSC/PAL up to 1024 x 768 Phoenix-Award PnP Flash BIOS Dual mode independent display BIOS ATA/IDE 1 x Ultra DMA 33, support 2 IDE drives Mechanical & Environmental Flash Disk 1 x CompactFlash Type II Socket Power Consumption EmCORE-i741VL/1.7GHz 5V/5.62A (Max.) Watchdog Timer 255-level Reset EmCORE-i741VL/CM600MHz 5V/2.86A (Max.) I/O 0 ~ 60ºC (32 ~ 140ºF) Operating Temp. Serial Port 2 x RS-232 ports (COM1, 2) 0 ~ 95% (non-condensing) Operating Humidity SPP/EPP/ECP mode Parallel Port 161 x 102 mm (6.3" x 4") Dimension (L x W) Support 1 Floppy disk drive share with parallel port Floppy Ordering Information 6 x USB 2.0 compliant USB Port 3.5" Intel Pentium M socket 478 miniboard with CRT/ EmCORE-i741VL LCD/DVI/LAN KB/MS 1 x PS2 K/B and Mouse EmCORE-i741VL/ 3.5" Intel Ultra Low Voltage Celeron M 600MHz 1 x 32 bit PCI-based PC/104 Plus interface Expansion Bus miniboard with CRT/LCD/DVI/LAN CM600 (support 4 PCI master) EmCORE-i741VL/ 3.5" Intel Ultra Low Voltage Celeron M 1.0GHz Ethernet miniboard with CRT/LCD/DVI/LAN CM1000 (Optional) Intel 82562ET 10/100 base-T Ethernet Chipset Cable Kit CBK-13-0761-00 Page 5-3 Built-in Boot ROM in Flash BIOS, support Boot from LAN FCDB-1293 4 x COM, Digital I/O Page 5-5 DVI Daughterboard Page 5-5 FCDB-1223 Audio Realtek ALC655 AC97 Codec, support Mic-in/Line-in/Line-out Codec/Interface All specifications are subject to change without notice. 2-3
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the EmCORE-i741VL R1.0 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Arbor Em104-i313D/4S CPU Board - PC/104 386SX-40 Module with 4MB EDO RAM, 16-bit Digital I/O, 4 Seri...
Arbor Em104-s415DVL CPU Board. STPC Elite 133Mhs 486 CPU board with LCD, CRT, Onboard 32MB SDRAM wit...
Arbor EmCORE-i315DL CPU Board - PC/104 386SX-40 Tiny CPU Module with 4MB EDO RAM, Realtek 8019AS LAN...
Arbor EmCORE-i3356 - Half-Sized Single-Board CPU | ALi M6117D/INTEL compatible 386SX-40ISA 386SX | S...
3.5 Form Factor Ultra Low Voltage Celeron M 600MHz CPU Mini-Board w/ CRT / LCD / SVGA Display, TV-Ou...
Arbor EmCORE-n511 3.5” NS Geode GX1-300 Miniboard with Flat Panel / CRT, Audio and LAN
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods