Elite.Parts Manufacturers A ANALOG DEVICES ADA4851-1
About product Specifications Features Datasheet FAQ

ANALOG DEVICES ADA4851-1

Description

Analog Devices ADA4851-1 Low Cost, High Speed, Rail-to-Rail, Output Operational Amplifier (Single)

Part Number

ADA4851-1

Price

Request Quote

Manufacturer

ANALOG DEVICES

Lead Time

Request Quote

Category

PRODUCTS - A

Specifications

# OpAmps per Pkg

1

-3dB Bandwidth>

130MHz

Ib

2.2µA

Input Noise (nV/rtHz)

10nV/rtHz

Isy per Amplifier

3.2mA

Packages

SOT

Slew Rate

375V/µs

Vcc-Vee

2.7V to 12V

Vos

600µV

Features

Datasheet

pdf file

ADA4851-1-1924983933.pdf

426 KiB

Extracted Text

Low Cost, High Speed, Rail-to-Rail, Output Op Amps ADA4851-1/ADA4851-2/ADA4851-4 FEATURES PIN CONFIGURATIONS Qualified for automotive applications ADA4851-1 V 1 6 +V OUT S High speed –V 2 5 POWER DOWN S 130 MHz, −3 dB bandwidth 375 V/μs slew rate +IN 3 4 –IN 55 ns settling time to 0.1% TOP VIEW (Not to Scale) Excellent video specifications Figure 1. ADA4851-1, 6-Lead SOT-23 (RJ-6) 0.1 dB flatness: 11 MHz ADA4851-2 Differential gain: 0.08% OUT1 1 8 +V S Differential phase: 0.09° –IN1 2 7 OUT Fully specified at +3 V, +5 V, and ±5 V supplies +IN1 3 6 –IN2 Rail-to-rail output –V 4 5 +IN2 S Output swings to within 60 mV of either rail TOP VIEW (Not to Scale) Low voltage offset: 0.6 mV Wide supply range: 2.7 V to 12 V Figure 2. ADA4851-2, 8-Lead MSOP (RM-8) Low power: 2.5 mA per amplifier V 1 1 14 V 4 OUT OUT Power-down mode 2 13 –IN 4 –IN 1 Available in space-saving packages 3 12 6-lead SOT-23, 8-lead MSOP, and 14-lead TSSOP +IN 1 +IN 4 ADA4851-4 4 TOP VIEW +V 11 –V S S (Not to Scale) APPLICATIONS 5 +IN 2 10 +IN 3 Automotive infotainment systems –IN 2 6 9 –IN 3 Automotive driver assistance systems 7 8 V 3 V 2 OUT OUT Consumer video Professional video Figure 3. ADA4851-4, 14-Lead TSSOP (RU-14) Video switchers Active filters Clock buffers GENERAL DESCRIPTION The ADA4851-1 (single), ADA4851-2 (dual), and ADA4851-4 See the Automotive Products section for more details. The (quad) are low cost, high speed, voltage feedback rail-to-rail ADA4851 family is designed to work over the extended output op amps. Despite their low price, these parts provide temperature range (−40°C to +125°C). excellent overall performance and versatility. The 130 MHz, 4 G = +1 −3 dB bandwidth and high slew rate make these amplifiers well V = 5V 3 S R = 1kΩ L suited for many general-purpose, high speed applications. C = 5pF 2 L The ADA4851 family is designed to operate at supply voltages 1 as low as +3 V and up to ±5 V. These parts provide true single- 0 supply capability, allowing input signals to extend 200 mV –1 below the negative rail and to within 2.2 V of the positive rail. –2 On the output, the amplifiers can swing within 60 mV of either –3 supply rail. –4 With their combination of low price, excellent differential gain –5 (0.08%), differential phase (0.09º), and 0.1 dB flatness out to –6 11 MHz, these amplifiers are ideal for consumer video applications. 1 10 100 1k FREQUENCY (MHz) The ADA4851-1W, ADA4851-2W, and ADA4851-4W are Figure 4. Small-Signal Frequency Response automotive grade versions, qualified for automotive applications. Rev. J Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. rights of third parties that may result from its use. Specifications subject to change without notice. No Tel: 781.329.4700 www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Fax: 781.461.3113 ©2004–2010 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. CLOSED-LOOP GAIN (dB) 05143-058 05143-001 05143-054 05143-004 ADA4851-1/ADA4851-2/ADA4851-4 TABLE OF CONTENTS Features .............................................................................................. 1  ESD Caution................................................................................ 10  Applications ....................................................................................... 1  Typical Performance Characteristics ........................................... 11  Pin Configurations ........................................................................... 1  Circuit Description......................................................................... 17  General Description ......................................................................... 1  Headroom Considerations ........................................................ 17  Revision History ............................................................................... 2  Overload Behavior and Recovery ............................................ 18  Specif ica t ions ..................................................................................... 4  Single-Supply Video Amplifier ................................................. 19  Specifications with +3 V Supply ................................................. 4  Video Reconstruction Filter ...................................................... 19  Specifications with +5 V Supply ................................................. 6  Outline Dimensions ....................................................................... 20  Specifications with ±5 V Supply ................................................. 8  Ordering Guide .......................................................................... 21  Absolute Maximum Ratings .......................................................... 10  Automotive Products ................................................................. 21  Thermal Resistance .................................................................... 10  REVISION HISTORY 10/10—Rev. I to Rev. J 8/07—Rev. D to Rev. E Added Output Characteristics, Linear Output Current Changes to Applications ................................................................... 1 Parameter, Table 2 ............................................................................. 7 Changes to Common-Mode Rejection Ratio, Conditions ........... 5 Added Output Characteristics, Linear Output Current Changes to Headroom Considerations Section ......................... 13 Parameter, Table 3 ............................................................................. 9 4/06—Rev. C to Rev. D Added Video Reconstruction Filter Section ............................... 15 5/10—Rev. H to Rev. I Changes to Power-Down Bias Current Parameter, Table 1 ........ 3 Moved Automotive Products Section .......................................... 20 5/05—Rev. B to Rev. C Changes to General Description ..................................................... 1 4/10—Rev. G. to Rev. H Changes to Input Section .............................................................. 14 Added Automotive Product Information ................... Throughout Changes to Table 1 Through Table 3 .............................................. 3 4/05—Rev. A to Rev. B Updated Outline Dimensions ....................................................... 19 Added ADA4851-2, Added 8-Lead MSOP ..................... Universal Changes to Features .......................................................................... 1 Changes to Ordering Guide .......................................................... 20 Changes to General Description ..................................................... 1 9/09—Rev. F. to Rev. G Changes to Table 1 ............................................................................. 3 Moved Automotive Products Section .......................................... 18 Changes to Table 2 ............................................................................. 4 Updated Outline Dimensions ....................................................... 19 Changes to Table 3 ............................................................................. 5 Changes to Table 4 and Figure 5 ...................................................... 6 5/09—Rev. E. to Rev. F Changes to Figure 12, Figure 15, and Figure 17 ............................ 8 Changes to Features, Applications, and General Description Changes to Figure 18 ......................................................................... 9 Changes to Figure 28 Caption ...................................................... 10 Sections .............................................................................................. 1 Changes to Table 1 ............................................................................ 3 Changes to Figure 33 ...................................................................... 11 Changes to Table 2 ............................................................................ 5 Changes to Figure 36 and Figure 38, Added Figure 39 ............. 12 Changes to Table 3 ............................................................................ 7 Changes to Circuit Description Section ...................................... 13 Changes to Figure 27 and Figure 28 ............................................. 13 Changes to Headroom Considerations Section ......................... 13 Changes to Figure 47, Added Automotive Products Section ... 18 Changes to Overload Behavior and Recovery Section .............. 14 Updated Outline Dimensions ....................................................... 19 Added Single-Supply Video Amplifier Section .......................... 15 Changes to Ordering Guide .......................................................... 20 Updated Outline Dimensions ....................................................... 16 Changes to Ordering Guide .......................................................... 17 Rev. J | Page 2 of 24 ADA4851-1/ADA4851-2/ADA4851-4 1/05—Rev. 0 to Rev. A Changes to Figure 22 ........................................................................9 Added ADA4851-4 ............................................................ Universal Changes to Figure 23, Figure 24, and Figure 25..........................10 Added 14-Lead TSSOP...................................................... Universal Changes to Figure 27 and Figure 28 .............................................10 Changes to Figure 29, Figure 30, and Figure 31..........................11 Changes to Features ..........................................................................1 Changes to General Description .....................................................1 Changes to Figure 34 ......................................................................11 Changes to Figure 3...........................................................................1 Added Figure 37 ..............................................................................12 Changes to Specifications.................................................................3 Changes to Ordering Guide...........................................................15 Changes to Figure 4...........................................................................6 Updated Outline Dimensions........................................................15 Changes to Figure 8...........................................................................7 Changes to Figure 11 ........................................................................8 10/04—Revision 0: Initial Version Rev. J | Page 3 of 24 ADA4851-1/ADA4851-2/ADA4851-4 SPECIFICATIONS SPECIFICATIONS WITH +3 V SUPPLY T = 25°C, R = 0 Ω for G = +1, R = 1 kΩ for G > +1, R = 1 kΩ, unless otherwise noted. A F F L Table 1. Parameter Conditions/Comments Min Typ Max Unit DYNAMIC PERFORMANCE −3 dB Bandwidth G = +1, VOUT = 0.1 V p-p 104 130 MHz ADA4851-1W/2W/4W only: T to T 95 MHz MIN MAX G = +1, V = 0.5 V p-p 80 105 MHz OUT ADA4851-1W/2W/4W only: TMIN to TMAX 72 MHz G = +2, VOUT = 1 V p-p, RL = 150 Ω 40 MHz Bandwidth for 0.1 dB Flatness G = +2, VOUT = 1 V p-p, RL = 150 Ω 15 MHz Slew Rate G = +2, V = 1 V step 100 V/μs OUT Settling Time to 0.1% G = +2, V = 1 V step, R = 150 Ω 50 ns OUT L NOISE/DISTORTION PERFORMANCE Harmonic Distortion, HD2/HD3 f = 1 MHz, V = 1 V p-p, G = −1 −73/−79 dBc C OUT Input Voltage Noise f = 100 kHz 10 nV/√Hz Input Current Noise f = 100 kHz 2.5 pA/√Hz Differential Gain G = +3, NTSC, RL = 150 Ω, VOUT = 2 V p-p 0.44 % Differential Phase G = +3, NTSC, RL = 150 Ω, VOUT = 2 V p-p 0.41 Degrees Crosstalk (RTI)—ADA4851-2/ADA4851-4 f = 5 MHz, G = +2, V = 1.0 V p-p −70/−60 dB OUT DC PERFORMANCE Input Offset Voltage 0.6 3.3 mV ADA4851-1W/2W/4W only: T to T 7.3 mV MIN MAX Input Offset Voltage Drift 4 μV/°C Input Bias Current 2.3 4.0 μA ADA4851-1W/2W/4W only: TMIN to TMAX 5.0 μA Input Bias Current Drift 6 nA/°C Input Bias Offset Current 20 nA Open-Loop Gain V = 0.25 V to 0.75 V 80 105 dB OUT ADA4851-1W/2W/4W only: T to T 78 dB MIN MAX ADA4851-1W only: TMIN to TMAX 75 INPUT CHARACTERISTICS Input Resistance Differential/common-mode 0.5/5.0 MΩ Input Capacitance 1.2 pF Input Common-Mode Voltage Range −0.2 to +0.8 V Input Overdrive Recovery Time (Rise/Fall) VIN = +3.5 V, −0.5 V, G = +1 60/60 ns Common-Mode Rejection Ratio V = 0 V to 0.5 V −81 −103 dB CM ADA4851-1W/2W/4W only: T to T −65 dB MIN MAX POWER-DOWN—ADA4851-1 ONLY Power-Down Input Voltage Power-down <1.1 V Power-up >1.6 V Turn-Off Time 0.7 μs Turn-On Time 60 ns Power-Down Bias Current Enabled POWER DOWN = 3 V 4 10 μA ADA4851-1W only: T to T 10 μA MIN MAX Power-Down POWER DOWN = 0 V −14 −20 μA ADA4851-1W only: TMIN to TMAX −20 μA Rev. J | Page 4 of 24 ADA4851-1/ADA4851-2/ADA4851-4 Parameter Conditions/Comments Min Typ Max Unit OUTPUT CHARACTERISTICS Output Overdrive Recovery Time (Rise/Fall) VIN = +0.7 V, −0.1 V, G = +5 70/100 ns Output Voltage Swing 0.05 to 2.91 0.03 to 2.94 V ADA4851-1W/2W/4W only: T to T 0.06 to 2.89 V MIN MAX Short-Circuit Current Sinking/sourcing 90/70 mA POWER SUPPLY Operating Range 2.7 12 V Quiescent Current per Amplifier 2.4 2.7 mA ADA4851-1W/2W/4W only: TMIN to TMAX 2.7 mA Quiescent Current (Power-Down) POWER DOWN = low 0.2 0.3 mA ADA4851-1W only: TMIN to TMAX 0.3 mA Positive Power Supply Rejection +V = +2.5 V to +3.5 V, −V = −0.5 V −81 −100 dB S S ADA4851-1W/2W/4W only: T to T −81 dB MIN MAX Negative Power Supply Rejection +V = +2.5 V, −V = −0.5 V to –1.5 V −80 −100 dB S S ADA4851-1W/2W/4W only: TMIN to TMAX −80 dB Rev. J | Page 5 of 24 ADA4851-1/ADA4851-2/ADA4851-4 SPECIFICATIONS WITH +5 V SUPPLY TA = 25°C, RF = 0 Ω for G = +1, RF = 1 kΩ for G > +1, RL = 1 kΩ, unless otherwise noted. Table 2. Parameter Conditions Min Typ Max Unit DYNAMIC PERFORMANCE −3 dB Bandwidth G = +1, VOUT = 0.1 V p-p 96 125 MHz ADA4851-1W/2W/4W only: TMIN to TMAX 90 MHz G = +1, VOUT = 0.5 V p-p 72 96 MHz ADA4851-1W/2W/4W only: T to T 64 MHz MIN MAX G = +2, V = 1.4 V p-p, R = 150 Ω 35 MHz OUT L Bandwidth for 0.1 dB Flatness G = +2, VOUT = 1.4 V p-p, RL = 150 Ω 11 MHz Slew Rate G = +2, VOUT = 2 V step 200 V/μs Settling Time to 0.1% G = +2, VOUT = 2 V step, RL = 150 Ω 55 ns NOISE/DISTORTION PERFORMANCE Harmonic Distortion, HD2/HD3 fC = 1 MHz, VOUT = 2 V p-p, G = +1 −80/−100 dBc Input Voltage Noise f = 100 kHz 10 nV/√Hz Input Current Noise f = 100 kHz 2.5 pA/√Hz Differential Gain G = +2, NTSC, R = 150 Ω, V = 2 V p-p 0.08 % L OUT Differential Phase G = +2, NTSC, R = 150 Ω, V = 2 V p-p 0.11 Degrees L OUT Crosstalk (RTI)—ADA4851-2/ADA4851-4 f = 5 MHz, G = +2, VOUT = 2.0 V p-p −70/−60 dB DC PERFORMANCE Input Offset Voltage 0.6 3.4 mV ADA4851-1W/2W/4W only: TMIN to TMAX 7.4 mV Input Offset Voltage Drift 4 μV/°C Input Bias Current 2.2 3.9 μA ADA4851-1W/2W/4W only: T to T 4.9 μA MIN MAX Input Bias Current Drift 6 nA/°C Input Bias Offset Current 20 nA Open-Loop Gain VOUT = 1 V to 4 V 97 107 dB ADA4851-1W/2W/4W only: TMIN to TMAX 90 dB INPUT CHARACTERISTICS Input Resistance Differential/common-mode 0.5/5.0 MΩ Input Capacitance 1.2 pF Input Common-Mode Voltage Range −0.2 to +2.8 V Input Overdrive Recovery Time (Rise/Fall) V = +5.5 V, −0.5 V, G = +1 50/45 ns IN Common-Mode Rejection Ratio V = 0 V to 2 V −86 −105 dB CM ADA4851-1W/2W/4W only: TMIN to TMAX −80 dB POWER-DOWN—ADA4851-1 ONLY Power-Down Input Voltage Power-down <1.1 V Power-up >1.6 V Turn-Off Time 0.7 μs Turn-On Time 50 ns Power-Down Bias Current Enabled POWER DOWN = 5 V 33 40 μA ADA4851-1W only: TMIN to TMAX 40 μA Power-Down POWER DOWN = 0 V −22 −30 μA ADA4851-1W only: TMIN to TMAX −30 μA Rev. J | Page 6 of 24 ADA4851-1/ADA4851-2/ADA4851-4 Parameter Conditions Min Typ Max Unit OUTPUT CHARACTERISTICS Output Overdrive Recovery Time (Rise/Fall) VIN = +1.1 V, −0.1 V, G = +5 60/70 ns Output Voltage Swing 0.09 to 4.91 0.06 to 4.94 V ADA4851-1W/2W/4W only: T to T 0.11 to 4.89 V MIN MAX Linear Output Current 1% THD with 1 MHz, V = 2 V p-p 66 mA OUT Short-Circuit Current Sinking/sourcing 110/90 mA POWER SUPPLY Operating Range 2.7 12 V Quiescent Current per Amplifier 2.5 2.8 mA ADA4851-1W/2W/4W only: TMIN to TMAX 2.8 mA Quiescent Current (Power-Down) POWER DOWN = low 0.2 0.3 mA ADA4851-1W only: T to T 0.3 mA MIN MAX Positive Power Supply Rejection +V = +5 V to +6 V, −V = 0 V −82 −101 dB S S ADA4851-1W/2W/4W only: T to T −82 dB MIN MAX Negative Power Supply Rejection +VS = +5 V, −VS = −0 V to −1 V −81 −101 dB ADA4851-1W/2W/4W only: TMIN to TMAX −81 dB Rev. J | Page 7 of 24 ADA4851-1/ADA4851-2/ADA4851-4 SPECIFICATIONS WITH ±5 V SUPPLY TA = 25°C, RF = 0 Ω for G = +1, RF = 1 kΩ for G > +1, RL = 1 kΩ, unless otherwise noted. Table 3. Parameter Conditions Min Typ Max Unit DYNAMIC PERFORMANCE −3 dB Bandwidth G = +1, VOUT = 0.1 V p-p 83 105 MHz ADA4851-1W/2W/4W only: TMIN to TMAX 75 MHz G = +1, VOUT = 1 V p-p 52 74 MHz ADA4851-1W/2W/4W only: T to T 42 MHz MIN MAX G = +2, V = 2 V p-p, R = 150 Ω 40 MHz OUT L Bandwidth for 0.1 dB Flatness G = +2, VOUT = 2 V p-p, RL = 150 Ω 11 MHz Slew Rate G = +2, VOUT = 7 V step 375 V/μs G = +2, VOUT = 2 V step 190 V/μs Settling Time to 0.1% G = +2, V = 2 V step, R = 150 Ω 55 ns OUT L NOISE/DISTORTION PERFORMANCE Harmonic Distortion, HD2/HD3 fC = 1 MHz, VOUT = 2 V p-p, G = +1 −83/−107 dBc Input Voltage Noise f = 100 kHz 10 nV/√Hz Input Current Noise f = 100 kHz 2.5 pA/√Hz Differential Gain G = +2, NTSC, R = 150 Ω, V = 2 V p-p 0.08 % L OUT Differential Phase G = +2, NTSC, RL = 150 Ω, VOUT = 2 V p-p 0.09 Degrees Crosstalk (RTI)—ADA4851-2/ADA4851-4 f = 5 MHz, G = +2, VOUT = 2.0 V p-p −70/−60 dB DC PERFORMANCE Input Offset Voltage 0.6 3.5 mV ADA4851-1W/2W/4W only: TMIN to TMAX 7.5 mV Input Offset Voltage Drift 4 μV/°C Input Bias Current 2.2 4.0 μA ADA4851-1W/2W/4W only: T to T 4.5 μA MIN MAX Input Bias Current Drift 6 nA/°C Input Bias Offset Current 20 nA Open-Loop Gain VOUT = ±2.5 V 99 106 dB ADA4851-1W/2W/4W only: T to T 90 dB MIN MAX INPUT CHARACTERISTICS Input Resistance Differential/common-mode 0.5/5.0 MΩ Input Capacitance 1.2 pF Input Common-Mode Voltage Range −5.2 to +2.8 V Input Overdrive Recovery Time (Rise/Fall) VIN = ±6 V, G = +1 50/25 ns Common-Mode Rejection Ratio VCM = 0 V to −4 V −90 −105 dB ADA4851-1W/2W/4W only: TMIN to TMAX −86 dB POWER-DOWN—ADA4851-1 ONLY Power-Down Input Voltage Power-down < −3.9 V Power-up > −3.4 V Turn-Off Time 0.7 μs Turn-On Time 30 ns Power-Down Bias Current Enabled POWER DOWN = +5 V 100 130 μA ADA4851-1W only: TMIN to TMAX 130 μA Power-Down POWER DOWN = −5 V −50 −60 μA ADA4851-1W only: T to T −60 μA MIN MAX Rev. J | Page 8 of 24 ADA4851-1/ADA4851-2/ADA4851-4 Parameter Conditions Min Typ Max Unit OUTPUT CHARACTERISTICS Output Overdrive Recovery Time (Rise/Fall) VIN = ±1.2 V, G = +5 80/50 ns Output Voltage Swing −4.87 to +4.88 −4.92 to +4.92 V ADA4851-1W/2W/4W only: T to T −4.85 to +4.85 V MIN MAX Linear Output Current 1% THD with 1 MHz, V = 2 V p-p 83 mA OUT Short-Circuit Current Sinking/sourcing 125/110 mA POWER SUPPLY Operating Range 2.7 12 V Quiescent Current per Amplifier 2.9 3.2 mA ADA4851-1W/2W/4W only: TMIN to TMAX 3.2 mA Quiescent Current (Power-Down) POWER DOWN = low 0.2 0.325 mA ADA4851-1W only: T to T 0.325 mA MIN MAX Positive Power Supply Rejection +V = +5 V to +6 V, −V = −5 V −82 −101 dB S S ADA4851-1W/2W/4W only: T to T −82 dB MIN MAX Negative Power Supply Rejection +VS = +5 V, −VS = −5 V to −6 V −81 −102 dB ADA4851-1W/2W/4W only: TMIN to TMAX −81 dB Rev. J | Page 9 of 24 ADA4851-1/ADA4851-2/ADA4851-4 ABSOLUTE MAXIMUM RATINGS PD = Quiescent Power + (Total Drive Power − Load Power) Table 4. 2 Parameter Rating V V V ⎛ ⎞ S OUT OUT P =() V× I + × – ⎜ ⎟ D S S Supply Voltage 12.6 V 2 R R ⎝ L ⎠ L Power Dissipation See Figure 5 RMS output voltages should be considered. If R is referenced L Common-Mode Input Voltage −V − 0.5 V to +V + 0.5 V S S to −V , as in single-supply operation, the total drive power is S Differential Input Voltage +VS to −VS V × I . If the rms signal levels are indeterminate, consider the S OUT Storage Temperature Range −65°C to +125°C worst case, when VOUT = VS/4 for RL to midsupply. Operating Temperature Range −40°C to +125°C 2 Lead Temperature JEDEC J-STD-20 (V /4) S P =() V × I + D S S Junction Temperature 150°C R L Stresses above those listed under Absolute Maximum Ratings In single-supply operation with R referenced to −V , the worst L S may cause permanent damage to the device. This is a stress case is V = V /2. OUT S rating only; functional operation of the device at these or any Airflow increases heat dissipation, effectively reducing θ . JA other conditions above those indicated in the operational In addition, more metal directly in contact with the package section of this specification is not implied. Exposure to absolute leads and through holes under the device reduces θJA. maximum rating conditions for extended periods may affect Figure 5 shows the maximum safe power dissipation in the device reliability. package vs. the ambient temperature for the 6-lead SOT-23 THERMAL RESISTANCE (170°C/W), the 8-lead MSOP (150°C/W), and the 14-lead θJA is specified for the worst-case conditions; that is, θJA is specified TSSOP (120°C/W) on a JEDEC standard 4-layer board. θ JA for device soldered in circuit board for surface-mount packages. values are approximations. 2.0 Table 5. Thermal Resistance Package Type θJA Unit TSSOP 6-lead SOT-23 170 °C/W 1.5 8-lead MSOP 150 °C/W 14-lead TSSOP 120 °C/W MSOP 1.0 Maximum Power Dissipation The maximum safe power dissipation for the ADA4851-1/ SOT-23-6 ADA4851-2/ADA4851-4 is limited by the associated rise in 0.5 junction temperature (T ) on the die. At approximately 150°C, J which is the glass transition temperature, the plastic changes its properties. Even temporarily exceeding this temperature limit 0 –55–45–35–25–15 –5 5 15253545 55657585 95 105115 125 may change the stresses that the package exerts on the die, AMBIENT TEMPERATURE (°C) permanently shifting the parametric performance of the Figure 5. Maximum Power Dissipation vs. Temperature for a 4-Layer Board amplifiers. Exceeding a junction temperature of 150°C for an extended period can result in changes in silicon devices, potentially causing degradation or loss of functionality. ESD CAUTION The power dissipated in the package (P ) is the sum of the D quiescent power dissipation and the power dissipated in the die due to the drive of the amplifier at the output. The quiescent power is the voltage between the supply pins (VS) times the quiescent current (IS). Rev. J | Page 10 of 24 MAXIMUM POWER DISSIPATION (W) 05143-057 ADA4851-1/ADA4851-2/ADA4851-4 TYPICAL PERFORMANCE CHARACTERISTICS TA = 25°C, RF = 0 Ω for G = +1, RF = 1 kΩ for G > +1, RL = 1 kΩ, unless otherwise noted. 1 4 V =±5V S 10pF G = +1 R = 150Ω L 3 V = 5V S 0 V = 0.1V p-p OUT R = 1kΩ L V = 0.1V p-p 2 OUT G = –1 –1 1 –2 0 5pF –3 –1 G = +10 –2 0pF –4 G = +2 –3 –5 –4 –6 –5 –7 –6 1 10 100 1 10 100 300 FREQUENCY (MHz) FREQUENCY (MHz) Figure 6. Small-Signal Frequency Response for Various Gains Figure 9. Small-Signal Frequency Response for Various Capacitive Loads 1 1 +125°C R = 150Ω L 0 0 +85°C V =±5V S V =±5V –40°C –1 –1 S G = +1 R = 1kΩ L G = +1 = 0.1V p-p +25°C V OUT V = 0.1V p-p OUT –2 –2 –3 –3 –4 –4 –5 –5 –6 –6 300 1 10 100 300 1 10 100 FREQUENCY (MHz) FREQUENCY (MHz) Figure 7. Small-Signal Frequency Response for Various Loads Figure 10. Small-Signal Frequency Response for Various Temperatures 2 1 V =±5V S G = +1 V = +5V R = 150Ω S L R = 150Ω L 1 0 V = 1V p-p V = 0.1V p-p OUT OUT 0 –1 –2 –1 V =±5V S –3 –2 G = +2 –4 –3 G = +10 –5 –4 G = –1 –5 –6 –7 –6 1 10 100 300 1 10 100 FREQUENCY (MHz) FREQUENCY (MHz) Figure 8. Small-Signal Frequency Response for Various Supplies Figure 11. Large-Signal Frequency Response for Various Gains Rev. J | Page 11 of 24 CLOSED-LOOP GAIN (dB) CLOSED-LOOP GAIN (dB) CLOSED-LOOP GAIN (dB) 05143-007 05143-009 05143-006 CLOSED-LOOP GAIN (dB) CLOSED-LOOP GAIN (dB) CLOSED-LOOP GAIN (dB) 05143-008 05143-010 05143-012 ADA4851-1/ADA4851-2/ADA4851-4 –40 6.2 V =±5V S G = –1 G = +2 V = 3V S 6.1 R = 150Ω –50 L R = 150Ω L R = 1kΩ F V = 2V OUT 6.0 HD2 –60 5.9 V = 100mV p-p OUT –70 5.8 V = 1V p-p OUT –80 V = 2V p-p 5.7 OUT HD3 –90 5.6 –100 5.5 –110 5.4 0.1 1 10 0.1 110 100 FREQUENCY (MHz) FREQUENCY (MHz) Figure 15. Harmonic Distortion vs. Frequency Figure 12. 0.1 dB Flatness Response for Various Output Amplitudes –50 1 V =±5V G = +2 S G = +1 V =±5V S V = 1V p-p 0 –60 OUT R = 1kΩ L f = 2MHz HD2 –70 –1 R = 1kΩ L –2 –80 HD3 R = 150Ω L –90 –3 –4 –100 –5 –110 –6 –120 0 1 23 45 6 78 9 10 1 10 100 300 OUTPUT AMPLITUDE (V p-p) FREQUENCY (MHz) Figure 13. Large Frequency Response for Various Loads Figure 16. Harmonic Distortion vs. Output Amplitude 140 0 –40 V =±5V G = +1 S V = 2V p-p OUT 120 –30 –50 V =±5V S 100 –60 –60 PHASE R = 1kΩ HD2 L 80 –90 –70 60 –120 –80 R = 150Ω HD2 L 40 –150 GAIN R = 150Ω HD3 L –90 20 –180 R = 1kΩ HD3 L –100 0 –210 –20 –240 –110 10 100 1k 10k 100k 1M 10M 100M 1G 0.1 1 10 FREQUENCY (Hz) FREQUENCY (MHz) Figure 14. Open-Loop Gain and Phase vs. Frequency Figure 17. Harmonic Distortion vs. Frequency for Various Loads Rev. J | Page 12 of 24 CLOSED-LOOP GAIN (dB) OPEN-LOOP GAIN (dB) CLOSED-LOOP GAIN (dB) 05143-029 OPEN-LOOP PHASE (Degrees) 05143-015 05143-021 HARMONIC DISTORTION (dBc) HARMONIC DISTORTION (dBc) HARMONIC DISTORTION (dBc) 05143-014 05143-016 05143-017 ADA4851-1/ADA4851-2/ADA4851-4 –40 0.075 2.575 G = +1 OR +2 G = +1 R = 1kΩ V = 2V p-p L OUT –50 V = 5V S 0.050 2.550 –60 0.025 2.525 R = 1kΩ HD2 L –70 0 2.500 –80 R = 150Ω HD2 L R = 150Ω HD3 L –0.025 2.475 –90 V =±5V S V = +5V S –0.050 2.450 –100 R = 1kΩ HD3 L –110 –0.075 2.425 0.1 1 10 0 50 100 150 200 FREQUENCY (MHz) TIME (ns) Figure 18. Harmonic Distortion vs. Frequency for Various Loads Figure 21. Small-Signal Transient Response for Various Supplies 6 2.575 10pF G = +5 G = +1 5 OUTPUT V =±5V 0pF S V = 5V S R = 150Ω R = 150Ω L L 4 2.550 f = 1MHz 5× INPUT 3 2 2.525 1 0 2.500 –1 –2 2.475 –3 –4 2.450 –5 –6 2.425 0 100 200 300 400 500 600 700 800 900 1k 0 20 40 60 80 100 120 140 160 180 200 TIME (ns) TIME (ns) Figure 19. Output Overdrive Recovery Figure 22. Small-Signal Transient Response for Various Capacitive Loads 6 1.5 3.0 G = +1 G = +2 5 INPUT V =±5V S R = 150Ω L R = 150Ω L 4 1.0 2.5 f = 1MHz 3 V =±5V V = +5V S S OUTPUT 2 0.5 2.0 1 0 0 1.5 –1 –2 –0.5 1.0 –3 –4 –1.0 0.5 –5 –6 –1.5 0 0 100 200 300 400 500 600 700 800 900 1k 0 50 100 150 200 TIME (ns) TIME (ns) Figure 20. Input Overdrive Recovery Figure 23. Large-Signal Transient Response for Various Supplies Rev. J | Page 13 of 24 INPUT AND OUTPUT VOLTAGE (V) INPUT AND OUTPUT VOLTAGE (V) HARMONIC DISTORTION (dBc) 05143-022 05143-019 05143-013 OUTPUT VOLTAGE FOR±5V SUPPLY (V) OUTPUT VOLTAGE FOR±5V SUPPLY (V) OUTPUT VOLTAGE (V) 05143-028 05143-026 05143-024 OUTPUT VOLTAGE FOR 5V SUPPLY (V) OUTPUT VOLTAGE FOR 5V SUPPLY (V) ADA4851-1/ADA4851-2/ADA4851-4 6 1.5 3.0 G = +2 V POWER DOWN G = +1 V = 5V S R = 150Ω L f = 400kHz IN 5 1.0 2.5 V =±5V V = +5V S S 4 0.5 2.0 3 0 1.5 2 –0.5 1.0 1 –1.0 0.5 0 V OUT –1 –1.5 0 03 150 45 0 50 100 150 200 TIME (µs) TIME (ns) Figure 27. ADA4851-1, Power-Up/Power-Down Time Figure 24. Large-Signal Transient Response for Various Supplies 3.5 0.5 3.0 +V – V S OUT V = ±5V S 0.4 2.5 V = +5V S =±5V V = +3V V S S 0.3 2.0 V = +3V S –V – V S OUT 1.5 0.2 1.0 0.1 0.5 0 0 –5 –4 –3 –2 –1 0 1 2 3 4 5 0 5 10 15 20 25 30 35 POWER DOWN VOLTAGE (V) LOAD CURRENT (mA) Figure 28. ADA4851-1, Supply Current vs. POWER DOWN Pin Voltage Figure 25. Output Saturation Voltage vs. Load Current 600 300 G = +2 V = ±5V S R = 1kΩ L 200 500 25% TO 75% OF V OUT V = +3V S 100 NEGATIVE SLEW RATE 400 V =±5V S 0 V = +5V S 300 POSITIVE SLEW RATE –100 200 –200 100 –300 0 –400 0 1 2 3 456 7 8 9 10 –40 –25 –10 5 20 35 50 65 80 95 110 125 OUTPUT VOLTAGE STEP (V p-p) TEMPERATURE (°C) Figure 29. Input Offset Voltage vs. Temperature for Various Supplies Figure 26. Slew Rate vs. Output Voltage Step Rev. J | Page 14 of 24 OUTPUT VOLTAGE FOR±5V SUPPLY (V) DC VOLTAGE DIFFERENTIAL FROM V (V) S SLEW RATE (V/µs) 05143-032 05143-049 05143-027 OUTPUT VOLTAGE FOR 5V SUPPLY (V) INPUT OFFSET VOLTAGE (μV) SUPPLY CURRENT (mA) VOLTAGE (V) 05143-035 05143-034 05143-033 ADA4851-1/ADA4851-2/ADA4851-4 2.2 1000 G = +1 2.0 100 I +, V =±5V B S 1.8 I –, V =±5V B S I +, V = +5V B S 1.6 I –, V = +5V B S 10 1.4 1.2 1 –40 –25 –10 5 20 35 50 65 80 95 110 125 10 100 1k 10k 100k 1M 10M 100M TEMPERATURE (°C) FREQUENCY (Hz) Figure 30. Input Bias Current vs. Temperature for Various Supplies Figure 33. Voltage Noise vs. Frequency 0.09 100 G = +2 V =±5V S 0.08 +V – V S OUT V = +5V 0.07 S +V – V S OUT 10 0.06 –V – V S OUT 0.05 –V – V S OUT 0.04 1 10 100 1k 10k 100k 1M 10M 100M –40 –25 –10 5 20 35 50 65 80 95 110 125 TEMPERATURE (°C) FREQUENCY (Hz) Figure 31. Output Saturation vs. Temperature for Various Supplies Figure 34. Current Noise vs. Frequency 3.2 80 V = ±5V S V =±5V S N = 420 70 x = –260µV 3.0 σ = 780µV 60 2.8 50 V = +5V S 2.6 40 30 2.4 V = +3V S 20 2.2 10 0 2.0 –4 –3 –2 –1 0 1 2 3 4 –40 –25 –10 5 20 35 50 65 80 95 110 125 TEMPERATURE (°C) V (mV) OS Figure 32. Supply Current vs. Temperature for Various Supplies Figure 35. Input Offset Voltage Distribution Rev. J | Page 15 of 24 INPUT BIAS CURRENT (μA) SUPPLY CURRENT (mA) DC VOLTAGE DIFFERENTIAL FROM V (V) S 05143-036 05143-038 05143-037 VOLTAGE NOISE (nV/ Hz) COUNT CURRENT NOISE (pA/ Hz) 05143-047 05143-045 05143-044 ADA4851-1/ADA4851-2/ADA4851-4 0 –30 G = +2 V =±5V S –10 –40 V = 5V S R = 1kΩ L V = 1V p-p –20 IN –50 DRIVE AMPS 1, 2, AND 4 –30 LISTEN AMP 3 –60 –40 –70 –50 –80 –60 DRIVE AMP 1 –90 –70 LISTEN AMP 2 –100 –80 –110 –90 –100 –120 1k 10k 100k 1M 10M 100M 1G 0.1 1 10 100 FREQUENCY (MHz) FREQUENCY (Hz) Figure 38. ADA4851-4, RTI Crosstalk vs. Frequency Figure 36. Common-Mode Rejection Ratio (CMRR) vs. Frequency 0 0 G = +2 V =±5V S –10 –10 V = 5V S R = 1kΩ L –20 V = 1V p-p –20 IN –30 –30 –40 –40 +PSR –50 –50 –60 –PSR DRIVE AMP 1 –60 LISTEN AMP 2 –70 –70 –80 DRIVE AMP 2 –90 –80 LISTEN AMP 1 –100 –90 –110 –100 100 1k 10k 100k 1M 10M 100M 1G 0.1 1 10 100 FREQUENCY (Hz) FREQUENCY (MHz) Figure 39. ADA4851-2, RTI Crosstalk vs. Frequency Figure 37. Power Supply Rejection (PSR) vs. Frequency Rev. J | Page 16 of 24 COMMON-MODE REJECTION (dB) POWER SUPPLY REJECTION (dB) 05143-023 05143-020 CROSSTALK (dB) CROSSTALK (dB) 05143-055 05143-060 ADA4851-1/ADA4851-2/ADA4851-4 CIRCUIT DESCRIPTION 440 The ADA4851-1/ADA4851-2/ADA4851-4 feature a high slew rate input stage that is a true single-supply topology, capable of 460 sensing signals at or below the negative supply rail. The rail-to- 480 rail output stage can pull within 60 mV of either supply rail when driving light loads and within 0.17 V when driving 150 Ω. High 500 speed performance is maintained at supply voltages as low as 2.7 V. 520 HEADROOM CONSIDERATIONS 540 These amplifiers are designed for use in low voltage systems. To obtain optimum performance, it is useful to understand the 560 behavior of the amplifiers as input and output signals approach 580 the headroom limits of the amplifiers. The input common-mode 600 voltage range of the amplifiers extends from the negative supply –6 –5 –4 –3 –2 –1 0 1 2 3 4 voltage (actually 200 mV below the negative supply), or from V (V) CM ground for single-supply operation, to within 2.2 V of the positive Figure 40. VOS vs. Common-Mode Voltage, VS = ±5 V supply voltage. Therefore, at a gain of 3, the amplifiers can 2 provide full rail-to-rail output swing for supply voltages as low G = +1 as 3.3 V and down to 3 V for a gain of 4. R = 1kΩ L 1 V = 5V S V = 3.0V Exceeding the headroom limit is not a concern for any inverting CM 0 gain on any supply voltage as long as the reference voltage at the V = 3.1V CM –1 positive input of the amplifier lies within the input common- mode range of the amplifier. –2 V = 3.2V CM The input stage is the headroom limit for signals approaching –3 V = 3.3V the positive rail. Figure 40 shows a typical offset voltage vs. the CM input common-mode voltage for the ADA4851-1/ADA4851-2/ –4 ADA4851-4 amplifiers on a ±5 V supply. Accurate dc performance –5 is maintained from approximately 200 mV below the negative supply to within 2.2 V of the positive supply. For high speed –6 0.1 1 10 100 1000 signals, however, there are other considerations. Figure 41 FREQUENCY (MHz) shows −3 dB bandwidth vs. input common-mode voltage for a Figure 41. Unity-Gain Follower Bandwidth vs. Input Common-Mode unity-gain follower. As the common-mode voltage approaches 2 V of positive supply, the amplifier responds well but the bandwidth begins to drop as the common-mode voltage approaches the positive supply. This can manifest itself in increased distortion or settling time. Higher frequency signals require more headroom than the lower frequencies to maintain distortion performance. Rev. J | Page 17 of 24 GAIN (dB) V (μV) OS 05143-046 05143-050 ADA4851-1/ADA4851-2/ADA4851-4 Figure 42 illustrates how the rising edge settling time for the The amplifiers do not exhibit phase reversal, even for input amplifier is configured as a unity-gain follower, stretching out voltages beyond the voltage supply rails. Going more than 0.6 V as the top of a 1 V step input that approaches and exceeds the beyond the power supplies turns on protection diodes at the input specified input common-mode voltage limit. stage, which greatly increases the current draw of the devices. 3.50 For signals approaching the negative supply and inverting gain G = +1 and high positive gain configurations, the headroom limit is the R = 1kΩ L 3.25 V = 5V S output stage. The ADA4851-1/ADA4851-2/ADA4851-4 amplifiers use a common emitter output stage. This output stage maximizes V = 2.25V TO 3.25V STEP 3.00 the available output range, limited by the saturation voltage of V = 2.25V TO the output transistors. The saturation voltage increases with the STEP 3.5V, 4V, AND 5V 2.75 drive current that the output transistor is required to supply due to the collector resistance of the output transistor. 2.50 3.6 G = +1 R = 1kΩ 3.4 L 2.25 V = 5V S 3.2 2.00 3.0 0 100 200 300 400 500 600 700 800 900 1k TIME (ns) V = 2V TO 3V 2.8 STEP Figure 43. Pulse Response of G = +1 Follower, Input Step Overloading V = 2.1V TO 3.1V STEP 2.6 the Input Stage V = 2.2V TO 3.2V STEP 2.4 Output V = 2.3V TO 3.3V STEP 2.2 V = 2.4V TO 3.4V Output overload recovery is typically within 35 ns after the STEP input of the amplifier is brought to a nonoverloading value. 2.0 Figure 44 shows output recovery transients for the amplifier 1.8 0 1020 3040 50 6070 8090 100 configured in an inverting gain of 1 recovering from a saturated TIME (ns) output from the top and bottom supplies to a point at midsupply. Figure 42. Output Rising Edge for 1 V Step at Input Headroom Limits 7 G = –1 R = 1kΩ As the saturation point of the output stage is approached, the 6 V = 5V TO 2.5V L OUT V = 5V S output signal shows increasing amounts of compression and 5 clipping. As in the input headroom case, higher frequency V = 0V TO 2.5V 4 OUT signals require slightly more headroom than the lower fre- quency signals. Figure 16 illustrates this point by plotting the 3 INPUT VOLTAGE typical harmonic distortion vs. the output amplitude. EDGES 2 OVERLOAD BEHAVIOR AND RECOVERY 1 Input 0 The specified input common-mode voltage of the ADA4851-1/ –1 ADA4851-2/ADA4851-4 is 200 mV below the negative supply –2 to within 2.2 V of the positive supply. Exceeding the top limit 0 1020 3040 50 6070 8090 100 results in lower bandwidth and increased rise time, as shown in TIME (ns) Figure 41 and Figure 42. Pushing the input voltage of a unity- Figure 44. Overload Recovery gain follower to less than 2 V from the positive supply leads to the behavior shown in Figure 43—an increasing amount of output error as well as a much increased settling time. The recovery time from input voltages of 2.2 V or closer to the positive supply is approximately 55 ns, which is limited by the settling artifacts caused by transistors in the input stage coming out of saturation. Rev. J | Page 18 of 24 OUTPUT VOLTAGE (V) 05143-052 INPUT AND OUTPUT VOLTAGE (V) OUTPUT VOLTAGE (V) 05143-053 05143-051 ADA4851-1/ADA4851-2/ADA4851-4 An example of an 8 MHz, three-pole, Sallen-Key, low-pass, SINGLE-SUPPLY VIDEO AMPLIFIER video reconstruction filter is shown in Figure 46. This circuit The ADA4851 family of amplifiers is well suited for portable features a gain of 3, has a 0.1 dB bandwidth of 8.2 MHz, and video applications. When operating in low voltage single-supply over 17 dB attenuation at 27 MHz (see Figure 47). The filter has applications, the input signal is limited by the input stage three poles; two are active with a third passive pole (R6 and C4) headroom. For additional information, see the Headroom placed at the output. C3 improves the filter roll-off. R6, R7, and Considerations section. Table 6 shows the recommended values R8 comprise the video load of 150 Ω. Components R6, C4, R7, for voltage, input signal, various gains, and output signal swing R8, and the input termination of the network analyzer form a for the typical video amplifier shown in Figure 45. 12.8 dB attenuator; therefore, the reference level is roughly R F −3.3 dB, as shown in Figure 47. C1 +V S C2 2.2μF 51pF + R2 R3 I OUT +3V 47Ω 125Ω R6 R7 P D 6.8Ω 68.1Ω C2 R G VIDEO DAC V OUT 0.01μF 75Ω CABLE R1 C1 V 75Ω OUT R8 C4 37.4Ω 51pF 75Ω U1 1nF R4 V′ V 75Ω 2kΩ IN C3 Figure 45. Video Amplifier R5 6.8pF 1kΩ Table 6. Recommended Values Figure 46. 8 MHz Video Reconstruction Filter Schematic Supply Input 5dB/REF –15dB 1: –3.3931dB 8.239626MHz Voltage Range R R Gain V’ V G F OUT (V) (V) (kΩ) (kΩ) (V/V) (V) (V) 3 0 to 0.8 1 1 2 1.6 0.8 1 3 0 to 0.8 0.499 1 3 2.4 1.2 5 0 to 2.8 1 1 2 4.9 2.45 VIDEO RECONSTRUCTION FILTER At higher frequencies, active filters require wider bandwidths to work properly. Excessive phase shift introduced by lower frequency op amps can significantly affect the filter performance. A common application for active filters is at the output of video DACs/encoders. The filter, or more appropriately, the video 0.03 0.1 1 10 100 reconstruction filter, is used at the output of a video DAC/ FREQUENCY (MHz) encoder to eliminate the multiple images that are created during Figure 47. Video Reconstruction Filter Frequency Performance the sampling process within the DAC. For portable video appli- cations, the ADA4851 family of amplifiers is an ideal choice due to its lower power requirements and high performance. Rev. J | Page 19 of 24 05143-059 05143-062 05143-061 ADA4851-1/ADA4851-2/ADA4851-4 OUTLINE DIMENSIONS 3.00 2.90 2.80 65 4 3.00 1.70 2.80 1.60 2.60 1.50 12 3 PIN 1 INDICATOR 0.95 BSC 1.90 BSC 1.30 1.15 0.90 0.20 MAX 1.45 MAX 0.08 MIN 0.95 MIN 0.55 0.15 MAX 10° 0.45 SEATING 0.60 0.05 MIN 4° 0.50 MAX 0.35 PLANE BSC 0° 0.30 MIN COMPLIANT TO JEDEC STANDARDS MO-178-AB Figure 48. 6-Lead Small Outline Transistor Package [SOT-23] (RJ-6) Dimensions shown in millimeters 3.20 3.00 2.80 8 5 5.15 3.20 4.90 3.00 4.65 1 2.80 4 PIN 1 IDENTIFIER 0.65 BSC 0.95 15° MAX 0.85 1.10 MAX 0.75 0.80 0.15 0.23 6° 0.55 0.40 0.05 0.09 0° 0.40 0.25 COPLANARITY 0.10 COMPLIANT TO JEDEC STANDARDS MO-187-AA Figure 49. 8-Lead Mini Small Outline Package [MSOP] (RM-8) Dimensions shown in millimeters Rev. J | Page 20 of 24 10-07-2009-B 121608-A ADA4851-1/ADA4851-2/ADA4851-4 5.10 5.00 4.90 14 8 4.50 6.40 4.40 BSC 4.30 1 7 PIN 1 0.65 BSC 1.05 1.20 1.00 MAX 0.20 0.80 0.09 0.75 0.15 8° 0.60 SEATING 0° 0.05 0.30 0.45 PLANE COPLANARITY 0.19 0.10 COMPLIANT TO JEDEC STANDARDS MO-153-AB-1 Figure 50. 14-Lead Thin Shrink Small Outline Package [TSSOP] (RU-14) Dimensions shown in millimeters ORDERING GUIDE 1, 2 Model Temperature Range Package Description Package Option Branding ADA4851-1YRJZ-R2 −40°C to +125°C 6-Lead Small Outline Transistor Package (SOT-23) RJ-6 HHB ADA4851-1YRJZ-RL −40°C to +125°C 6-Lead Small Outline Transistor Package (SOT-23) RJ-6 HHB ADA4851-1YRJZ-RL7 −40°C to +125°C 6-Lead Small Outline Transistor Package (SOT-23) RJ-6 HHB ADA4851-1WYRJZ-R7 −40°C to +125°C 6-Lead Small Outline Transistor Package (SOT-23) RJ-6 H1Z ADA4851-2YRMZ −40°C to +125°C 8-Lead Mini Small Outline Package (MSOP) RM-8 HSB ADA4851-2YRMZ-RL −40°C to +125°C 8-Lead Mini Small Outline Package (MSOP) RM-8 HSB ADA4851-2YRMZ-RL7 −40°C to +125°C 8-Lead Mini Small Outline Package (MSOP) RM-8 HSB ADA4851-2WYRMZ-R7 −40°C to +125°C 8-Lead Mini Small Outline Package (MSOP) RM-8 H1Y ADA4851-4YRUZ –40°C to +125°C 14-Lead Thin Shrink Small Outline Package (TSSOP) RU-14 ADA4851-4YRUZ-RL –40°C to +125°C 14-Lead Thin Shrink Small Outline Package (TSSOP) RU-14 ADA4851-4YRUZ-RL7 –40°C to +125°C 14-Lead Thin Shrink Small Outline Package (TSSOP) RU-14 ADA4851-4WYRUZ-R7 –40°C to +125°C 14-Lead Thin Shrink Small Outline Package (TSSOP) RU-14 ADA4851-1YRJ-EBZ 6-Lead SOT-23 Evaluation Board ADA4851-2YRM-EBZ 8-Lead MSOP Evaluation Board ADA4851-4YRU-EBZ 14-Lead TSSOP Evaluation Board 1 Z = RoHS Compliant Part. 2 W = qualified for automotive applications. AUTOMOTIVE PRODUCTS The ADA4851-1W/ADA4851-2W/ADA4851-4W models are available with controlled manufacturing to support the quality and reliability requirements of automotive applications. Note that these automotive models may have specifications that differ from the commercial models; therefore, designers should review the Specifications section of this data sheet carefully. Only the automotive grade products shown are available for use in automotive applications. Contact your local Analog Devices, Inc., account representative for specific product ordering information and to obtain the specific Automotive Reliability reports for these models. Rev. J | Page 21 of 24 061908-A ADA4851-1/ADA4851-2/ADA4851-4 NOTES Rev. J | Page 22 of 24 ADA4851-1/ADA4851-2/ADA4851-4 NOTES Rev. J | Page 23 of 24 ADA4851-1/ADA4851-2/ADA4851-4 NOTES ©2004–2010 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D05143-0-10/10(J) Rev. J | Page 24 of 24

Frequently asked questions

What makes Elite.Parts unique?

chervon down
At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

What kind of warranty will the ADA4851-1 have?

chervon down
Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Which carriers does Elite.Parts work with?

chervon down
Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Will Elite.Parts sell to me even though I live outside the USA?

chervon down
Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

I have a preferred payment method. Will Elite.Parts accept it?

chervon down
All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

Why buy from GID?

quality

Quality

We are industry veterans who take pride in our work

protection

Protection

Avoid the dangers of risky trading in the gray market

access

Access

Our network of suppliers is ready and at your disposal

savings

Savings

Maintain legacy systems to prevent costly downtime

speed

Speed

Time is of the essence, and we are respectful of yours

What they say about us

FANTASTIC RESOURCE

star star star star star

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

star star star star star

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

star star star star star

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

star star star star star

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

star star star star star

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

star star star star star

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Related Products

ANALOG DEVICE# A5E1032

SOCKET FOR MODEL AD210 IC

TRANSFORMER CURRENT 60.0 AMP

SOCKET FOR MODEL 1B22 IC

product

Analog Devices AD7291 12-Bit Low power 8-Channel Successive Approximation Analog-to-Digital Converte...