ANALOG DEVICES ADA4830-1
Description
Analog Devices ADA4830-1 Single, Monolithic, High Speed, Difference Amplifier
Part Number
ADA4830-1
Price
Request Quote
Manufacturer
ANALOG DEVICES
Lead Time
Request Quote
Category
PRODUCTS - A
Specifications
# Channels
1
CMRR (dB)
65dB
Rail-Rail In
Yes
Rail-Rail Out
No
Slew Rate
220V/µs
Features
- Enable/output disable mode
- Excellent video specifications: 0.1 dB flatness to 28 MHz; SNR of 73 dB to 15 MHz; Differential gain/phase of 0.1%/0.1°
- High performance video amplifier with 0.50 V/V gain: -3 dB bandwidth of 84 MHz; 250 V/µs slew rate (2 V step)
- Input over-voltage (short-to-battery) protection of up to 18 V
- Qualified for automotive applications
- Short-to-battery output flag for wire diagnostics
- Space saving 3 mm × 3 mm LFCSP package
- Wide input common-mode range with single 5 V supply
- Wide operating temperature range: -40°C to +125°C
- Wide supply range: 2.9 V to 5.5 V
Datasheet
Extracted Text
High Speed Difference Amplifier with Input Short-to-Battery Protection Data Sheet ADA4830-1/ADA4830-2 FEATURES FUNCTIONAL BLOCK DIAGRAM ENA +VS STB Input overvoltage (short-to-battery) protection of up to 18 V +VS Short-to-battery output flag for wire diagnostics ADA4830-1 Wide input common-mode range with single 5 V supply R/2 High performance video amplifier with 0.50 V/V gain VREF ×1 −3 dB bandwidth of 84 MHz 250 V/µs slew rate (2 V step) R INP Excellent video specifications VOUT R 0.1 dB flatness to 28 MHz INN R/2 SNR of 73 dB to 15 MHz Differential gain/phase of 0.1%/0.1° GND Wide supply range: 2.9 V to 5.5 V Figure 1. Enable/output disable mode ENA1 +VS1 STB1 Space saving 3 mm × 3 mm LFCSP package +VS Wide operating temperature range: −40°C to +125°C ADA4830-2 Qualified for automotive applications R/2 VREF1 ×1 APPLICATIONS Automotive vision systems R INP1 Automotive infotainment VOUT1 R Surveillance systems INN1 R/2 GENERAL DESCRIPTION GND1 GND2 R/2 The ADA4830-1 (single) and ADA4830-2 (dual) are monolithic, R INN2 high speed difference amplifiers that integrate input overvoltage VOUT2 R (short-to-battery) protection of up to 18 V with a wide input INP2 +VS common-mode voltage range and excellent ESD robustness. They are intended for use as receivers for differential or pseudo VREF2 ×1 differential CVBS and other high speed video signals in harsh, R/2 noisy environments such as automotive infotainment and vision systems. The ADA4830-1 and ADA4830-2 combine high speed ENA2 +VS2 STB2 and precision, which allows for accurate reproduction of CVBS Figure 2. video signals, yet rejects unwanted common-mode error voltages. The short-to-battery protection that is integrated into the below ground rail and to 8.5 V above ground on a single 5 V ADA4830-1 and ADA4830-2 employs fast switching circuitry to supply. At the output, the amplifier can swing to within 250 mV clamp and hold internal voltage nodes at a safe level when an input of either supply rail into a 150 Ω load. overvoltage condition is detected. This protection allows the inputs The ADA4830-1 and ADA4830-2 present a gain of 0.50 V/V at their of the ADA4830-1 and ADA4830-2 to be directly connected to a output. This is designed to keep the video signal within the allowed remote video source, such as a rearview camera, without the range of the video decoder, which is typically 1 V p-p or less. need for large expensive series capacitors. The ADA4830-1 and The ADA4830-1W and ADA4830-2W are automotive grade ADA4830-2 can withstand direct short-to-battery voltages as version, qualified for automotive applications. See the high as 18 V on their input pins. Automotive Products section for more details. The ADA4830-1 and ADA4830-2 are designed to operate at supply The ADA4830-1 and ADA4830-2 are available in 3 mm × 3 mm voltages as low as 2.9 V and as high as 5.5 V, using only 6.8 mA LFCSP packages, 8-lead and 16-lead, respectively, and are specified of supply current per channel. These devices provide true single- for operation over the automotive temperature range of −40°C supply capability, allowing the input signal to extend 8.5 V to +125°C. Rev. C Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. rights of third parties that may result from its use. Specifications subject to change without notice. No Tel: 781.329.4700 www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. Fax: 781.461.3113 ©2011–2012 Analog Devices, Inc. All rights reserved. 10020-001 10020-102 ADA4830-1/ADA4830-2 Data Sheet TABLE OF CONTENTS Features .............................................................................................. 1 Power Supply Pins (ADA4830-2).............................................. 13 Applications ....................................................................................... 1 Applications Information .............................................................. 14 General Description ......................................................................... 1 Methods of Transmission .......................................................... 14 Functional Block Diagram .............................................................. 1 Voltage Reference (VREF Pin) ................................................. 14 Revision History ............................................................................... 2 Input Common-Mode Range ................................................... 15 Specifications ..................................................................................... 3 Short-to-Battery Output Flag Pin ............................................ 15 5 V Operation ............................................................................... 3 Enable/Disable Modes (ENA Pin) ........................................... 15 3.3 V Operation ............................................................................ 4 PCB Layout ................................................................................. 15 Absolute Maximum Ratings ....................................................... 6 Exposed Paddle (EPAD) Connection ...................................... 15 Thermal Resistance ...................................................................... 6 Using the ADA4830-2 as a Low Cost Video Switch ............... 16 Maximum Power Dissipation ..................................................... 6 Driving Capacitive Loads .......................................................... 17 ESD Caution .................................................................................. 6 Typical Applications Circuits ........................................................ 18 Pin Configurations and Function Descriptions ........................... 7 Fully DC-Coupled Transmission Line .................................... 20 Typical Performance Characteristics ............................................. 9 Packaging and Ordering Information ......................................... 21 Theory of Operation ...................................................................... 13 Outline Dimensions ................................................................... 21 Core Amplifier ............................................................................ 13 Ordering Guide .......................................................................... 21 Overvoltage (Short-to-Battery) Protection ............................. 13 Automotive Products ................................................................. 22 Short-to-Battery Output Flag ................................................... 13 ESD Protection ........................................................................... 13 REVISION HISTORY 6/12—Rev. B to Rev. C Added Figure 5 and Table 6 ............................................................. 7 Added ADA4830-2W......................................................... Universal Changes to Typical Performance Characteristics Section ........... 8 Changes to Features ..................................................................................... 1 Added Figure 23 ............................................................................. 10 Changes to Ordering Guide ..................................................................... 21 Added Figure 24 to Figure 29 ....................................................... 11 Changes to Pseudo Differential Mode (Unbalanced Source 4/12—Rev. A to Rev. B Termination) Section, Fully Differential Mode Section, and Voltage Reference (VREF Pin) Section ....................................... 13 Changes to Features Section and Generation Description Section . 1 Changes to Table 1 ....................................................................................... 3 Changes to Input Common-Mode Range Section, Table 7, Changes to Table 2 ....................................................................................... 4 Short-to-Battery Output Flag Pin Section, and Table 9 ............ 14 Changes to Table 4 ....................................................................................... 6 Added Figure 34 ............................................................................. 15 Changes to Figure 28 ................................................................................. 12 Added Driving Capacitive Loads Section and Figure 35 to Changes to ESD Protection Section ....................................................... 13 Figure 38 .......................................................................................... 16 Changes to Ordering Guide ..................................................................... 21 Changes to Figure 39 and Figure 40 ............................................. 17 Changes Typical Application Circuits Section and Figure 41 ......... 18 Added Automotive Products Section .................................................... 22 Added Fully DC-Coupled Transmission Line Section ..................... 19 1/12—Rev. 0 to Rev. A Changes to Figure 42 ................................................................................. 19 Added ADA4830-2 ............................................................. Universal Updated Outline Dimensions ....................................................... 20 Changes to Features Section and Figure 1..................................... 1 Changes to Ordering Guide .......................................................... 20 Added Figure 2; Renumbered Sequentially .................................. 1 Changes to Table 1 ............................................................................ 3 10/11—Revision 0: Initial Version Changes to Table 2 ............................................................................ 4 Added Supply Voltage Delta Parameter, Table 3; Renumbered Sequentially ....................................................................................... 5 Rev. C | Page 2 of 22 Data Sheet ADA4830-1/ADA4830-2 SPECIFICATIONS 5 V OPERATION T = 25°C, +V = 5 V, R = 1 kΩ, V = 2.5 V (floating), V = +V /2, R = 5 kΩ to +V , unless otherwise specified. A S L REF INCM S STB S Table 1. Parameter Test Conditions/Comments Min Typ Max Unit DYNAMIC PERFORMANCE −3 dB Large Signal Bandwidth V = 0.5 V p-p, R = 150 Ω 64 71 MHz OUT L ADA4830-1W/ADA4830-2W only T to T 56 MHz MIN MAX VOUT = 0.1 V p-p, RL = 1 kΩ 84 MHz V = 0.1 V p-p, R = 150 Ω 65 74 MHz OUT L ADA4830-1W/ADA4830-2W only T to T 60 MHz MIN MAX Bandwidth for 0.1 dB Flatness VOUT = 0.5 V p-p, RL = 150 Ω 28 MHz Slew Rate (t /t ) V = 2 V step 196/200 250/300 V/µs R F OUT ADA4830-1W/ADA4830-2W only T to T 164/220 V/µs MIN MAX Settling Time to 0.1% V = 2 V step 25 ns OUT NOISE/DISTORTION PERFORMANCE Output Voltage Noise f = 1 MHz 28 nV/√Hz Differential Gain Error (NTSC) RL = 150 Ω, VIN = 1 V p-p 0.1 % Differential Phase Error (NTSC) RL = 150 Ω, VIN = 1 V p-p 0.1 Degrees Signal-to-Noise Ratio f = 100 kHz to 15 MHz, V = 0.5 V p-p 73 dB OUT DC PERFORMANCE Nominal Gain V to V 0.49 0.50 0.51 V/V IN OUT ADA4830-1W/ADA4830-2W only T to T 0.49 0.51 V/V MIN MAX Output Bias Voltage 2.45 2.50 2.55 V ADA4830-1W/ADA4830-2W only T to T 2.44 2.56 V MIN MAX INPUT CHARACTERISTICS Input Resistance (Differential Mode) 6.7 kΩ Input Resistance (Common Mode) 2 kΩ Input Common-Mode Voltage Range VREF voltage adjusted to optimized range −10 +9.5 V ADA4830-1W/ADA4830-2W only T to T −10 +9.5 V MIN MAX Common-Mode Rejection (CMR) V = ±5 V 42 65 dB IN ADA4830-1W/ADA4830-2W only TMIN to TMAX 42 dB SHORT-TO-BATTERY CHARACTERISTICS Input Current VIN = 18 V (short-to-battery) 4.1 mA Protected Input Voltage Range −9 +20 V ADA4830-1W/ADA4830-2W only T to T −9 +20 V MIN MAX Short-to-Battery Output Flag Trigger Minimum VIN needed to signal an input fault 9.8 10.3 10.8 V Level condition ADA4830-1W/ADA4830-2W only T to T 9.8 10.8 V MIN MAX VOLTAGE REFERENCE INPUT Input Voltage Range 0.2 to 3.9 V Input Resistance 20 kΩ Gain VREF to VOUT 1 V/V LOGIC OUTPUT/INPUT CHARACTERISTICS STB VOH VIN ≤ 9.8 V (normal operation) 5.0 V STB V V ≥ 10.8 V (fault condition), ADA4830-1/ADA4830-2 110/253 mV OL IN ENA V Voltage to enable device ≥3.0 V IH ENA VIL Voltage to disable device ≤1.0 V Rev. C | Page 3 of 22 ADA4830-1/ADA4830-2 Data Sheet Parameter Test Conditions/Comments Min Typ Max Unit OUTPUT CHARACTERISTICS Output Voltage Swing RL = 150 Ω to ground 0.01 to 4.75 V Linear Output Current <1% THD at 100 kHz 125 mA Short-Circuit Current Sourcing/sinking 248/294 mA Capacitive Load Drive Peaking ≤ 3 dB 47 pF POWER SUPPLY Operating Range Operation outside of this range results in 2.9 5.5 V performance degradation Quiescent Current per Amplifier Enabled (ENA = 5 V), no load 6.8 10 mA ADA4830-1W/ADA4830-2W only TMIN to TMAX 10.4 mA Disabled (ENA = 0 V), no load 90 µA V = 18 V (short-to-battery), no load 5.3 mA IN Power Supply Rejection Ratio (PSRR) +V = 4.5 V to 5.5 V, V is forced to 2.5 V 53 dB S REF OPERATING TEMPERATURE RANGE −40 +125 °C 3.3 V OPERATION TA = 25°C, +VS = 3.3 V, RL = 1 kΩ, VREF = 1.65 V (floating), VINCM = +VS/2, RSTB = 5 kΩ to +Vs, unless otherwise specified. Table 2. Parameter Test Conditions/Comments Min Typ Max Unit DYNAMIC PERFORMANCE −3 dB Large Signal Bandwidth VOUT = 0.5 V p-p, RL = 150 Ω 63 73 MHz ADA4830-1W/ADA4830-2W only TMIN to TMAX 58 MHz VOUT = 0.1 V p-p, RL = 1 kΩ 89 MHz VOUT = 0.1 V p-p, RL = 150 Ω 64 78 MHz ADA4830-1W/ADA4830-2W only T to T 59 MHz MIN MAX Bandwidth for 0.1 dB Flatness V = 0.5 V p-p, R = 150 Ω 20 MHz OUT L Slew Rate (tR/tF) VOUT = 1 V step 147/155 165/180 V/µs ADA4830-1W/ADA4830-2W only TMIN to TMAX 136/145 V/µs Settling Time to 0.1% VOUT = 1 V step 25 ns NOISE/DISTORTION PERFORMANCE Output Voltage Noise f = 1 MHz 28 nV/√Hz Differential Gain Error (NTSC) R = 150 Ω, V = 1 V p-p 0.1 % L IN Differential Phase Error (NTSC) R = 150 Ω, V = 1 V p-p 0.1 Degrees L IN Signal-to-Noise Ratio f = 100 kHz to 15 MHz, V = 0.5 V p-p 73 dB OUT DC PERFORMANCE Nominal Gain V to V 0.49 0.50 0.51 V/V IN OUT ADA4830-1W/ADA4830-2W only T to T 0.49 0.51 V/V MIN MAX Output Bias Voltage 1.60 1.65 1.70 V ADA4830-1W/ADA4830-2W only TMIN to TMAX 1.59 1.71 V INPUT CHARACTERISTICS Input Resistance (Differential Mode) 6.7 kΩ Input Resistance (Common Mode) 2 kΩ Input Common-Mode Voltage Range VREF voltage adjusted to optimized range −8 +6 V ADA4830-1W/ADA4830-2W only T to T −8 +6 V MIN MAX Common-Mode Rejection (CMR) V = ±3.3 V 41 54 dB IN ADA4830-1W/ADA4830-2W only TMIN to TMAX 40 dB SHORT-TO-BATTERY CHARACTERISTICS Input Current V = 18 V (short-to-battery) 4.4 mA IN Protected Input Voltage Range −9 +20 V ADA4830-1W/ADA4830-2W only TMIN to TMAX −9 +20 V Short-to-Battery Output Flag Trigger Minimum VIN needed to signal an input fault 7.4 7.8 8.2 V Level condition ADA4830-1W/ADA4830-2W only T to T 7.4 8.2 V MIN MAX Rev. C | Page 4 of 22 Data Sheet ADA4830-1/ADA4830-2 Parameter Test Conditions/Comments Min Typ Max Unit VOLTAGE REFERENCE INPUT Input Voltage Range 0.2 to 2.2 V Input Resistance 20 kΩ Gain V to V 1 V/V REF OUT LOGIC OUTPUT/INPUT CHARACTERISTICS STB V V ≤ 7.4 V (normal operation) 3.3 V OH IN STB V V ≥ 8.2 V (fault condition), ADA4830-1/ADA4830-2 85/178 mV OL IN ENA V Voltage to enable device ≥1.8 V IH ENA VIL Voltage to disable device ≤0.8 V OUTPUT CHARACTERISTICS Output Voltage Swing R = 150 Ω to ground 0.01 to 3.08 V L Linear Output Current <1% THD at 100 kHz 50 mA Short-Circuit Current Sourcing/sinking 85/180 mA Capacitive Load Drive Peaking ≤ 4 dB 47 pF POWER SUPPLY Operating Range Operation outside of this range results in 2.9 5.5 V performance degradation Quiescent Current per Amplifier Enabled (ENA = 3.3 V), no load 5.5 8.0 mA ADA4830-1W/ADA4830-2W only T to T 8.4 mA MIN MAX Disabled (ENA = 0 V), no load 60 µA VIN = 18 V (short-to-battery), no load 4.3 mA Power Supply Rejection Ratio (PSRR) +VS = 3.0 V to 3.6 V, VREF forced to 1.65 V 42 dB OPERATING TEMPERATURE RANGE −40 +125 °C Rev. C | Page 5 of 22 ADA4830-1/ADA4830-2 Data Sheet ABSOLUTE MAXIMUM RATINGS The power dissipated in the package (PD) is the sum of the Table 3. quiescent power dissipation and the power dissipated in the Parameter Rating package due to the load drive for all outputs. The quiescent Supply Voltage (+VS Pin) 6 V power is the supply voltage (+V ) times the quiescent current (I ). S S Supply Voltage Delta The power dissipated due to load drive depends on the particular +VS1 to +VS2, ADA4830-2 Only 0.5 V application. The power due to load drive is calculated by Input Voltage Positive Direction (INNx, INPx) 22 V multiplying the load current by the associated voltage drop Input Voltage Negative Direction (INNx, INPx) −10 V across the device. RMS voltages and currents must be used Reference Voltage (VREFx Pin) +V + 0.3 V S in these calculations. Power Dissipation See Figure 3 Airflow increases heat dissipation, effectively reducing θJA. Storage Temperature Range −65°C to +150°C Figure 3 shows the maximum power dissipation in the package vs. Operating Temperature Range −40°C to +125°C the ambient temperature for the 8-lead LFCSP (116°C/W) and Lead Temperature (Soldering, 10 sec) 260°C the 16-lead LFCSP (54°C/W) on a JEDEC standard 4-layer board. Junction Temperature 150°C θJA values are approximate. Stresses above those listed under Absolute Maximum Ratings 3.0 may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any 2.5 other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute 2.0 maximum rating conditions for extended periods may affect 16-LEAD LFCSP device reliability. 1.5 THERMAL RESISTANCE 8-LEAD LFCSP 1.0 θ is specified for the device and its exposed paddle is soldered JA to a high thermal conductivity, 4-layer (2s2p) circuit board, as 0.5 described in EIA/JESD 51-7. 0 Table 4. 0 10 20 30 40 50 60 70 80 90 100 Package Type θJA θJC Unit AMBIENT TEMPERATURE (°C) 8-Lead LFCSP 50 5 °C/W Figure 3. Maximum Power Dissipation vs. 16-Lead LFCSP 54 6 °C/W Ambient Temperature for a 4-Layer Board MAXIMUM POWER DISSIPATION ESD CAUTION The maximum safe power dissipation in the ADA4830-1 and ADA4830-2 packages is limited by the associated rise in junction temperature (TJ) on the die. At approximately 150°C, which is the glass transition temperature, the plastic changes its properties. Exceeding a junction temperature of 150°C for an extended time can result in changes in the silicon devices, potentially causing failure. Rev. C | Page 6 of 22 MAXIMUM POWER DISSIPATION (W) 10020-050 Data Sheet ADA4830-1/ADA4830-2 PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS VREF 1 8 +VS INP 2 ADA4830-1 7 ENA TOP VIEW INN 3 6 VOUT (Not to Scale) GND 4 5 STB NOTES 1. EXPOSED PAD ON BOTTOM SIDE OF PACKAGE. NOT CONNECTED ELECTRICALLY, BUT SHOULD BE SOLDERED TO A METALIZED AREA ON THE PCB TO MINIMIZE THERMAL RESISTANCE. Figure 4. ADA4830-1 Pin Configuration Table 5. ADA4830-1 Pin Function Descriptions Pin No. Mnemonic Description 1 VREF Voltage Reference Input. Sets the output dc bias voltage. Internally biased to +VS/2 when left floating. See the Applications Information section. 2 INP Positive Input. 3 INN Negative Input. 4 GND Power Supply Ground Pin. 5 STB Short-to-Battery Indicator Output Pin. A logic low indicates an overvoltage condition (short-to-battery), whereas a logic high indicates normal operation. An open-drain configuration requires external pull-up resistor. 6 VOUT Amplifier Output. 7 ENA Enable Pin. Connect to +V or float for normal operation. Connect to ground for device disable. S 8 +VS Positive Power Supply Pin. Bypass this pin with a 0.1 µF capacitor to ground. EPAD Exposed Pad. The exposed pad is located on the bottom side of the package. The pad is not connected electrically but should be soldered to a metalized area on the printed circuit board (PCB) to minimize thermal resistance. Rev. C | Page 7 of 22 10020-003 ADA4830-1/ADA4830-2 Data Sheet INP1 1 12 VOUT1 INN1 2 11 STB1 ADA4830-2 TOP 10 STB2 INN2 3 VIEW INP2 4 9 VOUT2 NOTES 1. EXPOSED PAD ON BOTTOM SIDE OF PACKAGE. NOT CONNECTED ELECTRICALLY, BUT SHOULD BE SOLDERED TO A METALIZED AREA ON THE PCB TO MINIMIZE THERMAL RESISTANCE. Figure 5. ADA4830-2 Pin Configuration Table 6. ADA4830-2 Pin Function Descriptions Pin No. Mnemonic Description 1, 4 INP1, INP2 Positive Inputs. 2, 3 INN1, INN2 Negative Inputs. 5, 16 VREF2, VREF1 Voltage Reference Inputs. Sets the output dc bias voltage. Internally biased to +V /2 when left floating. See S the Applications Information section. 6, 15 GND2, GND1 Power Supply Ground Pins. 7, 14 +VS2, +VS1 Positive Power Supply Pins. These pins must be connected together, to the same voltage. Bypass these pins with a 0.1 µF capacitor to ground. 8, 13 ENA2, ENA1 Enable Pins. Connect to +V or float for normal operation and to ground for device disable. S 9, 12 VOUT2, VOUT1 Amplifier Outputs. 10, 11 STB2, STB1 Short-to-Battery Indicator Output Pins. A logic low indicates an overvoltage condition (short-to-battery), whereas a logic high indicates normal operation. An open-drain configuration requires an external pull-up resistor. EPAD Exposed Pad. The exposed pad is located on the bottom side of the package. The pad is not connected electrically, but should be soldered to a metalized area on the PCB to minimize thermal resistance. Rev. C | Page 8 of 22 10020-004 VREF2 5 16 VREF1 GND2 6 15 GND1 +VS2 7 14 +VS1 ENA2 8 13 ENA1 Data Sheet ADA4830-1/ADA4830-2 TYPICAL PERFORMANCE CHARACTERISTICS TA = 25°C, +VS = 5 V, RL = 1 kΩ, VREF = 2.5 V (floating), VINCM = +VS/2, RSTB = 5 kΩ to +VS, unless otherwise specified. 3 3 R = 1kΩ L R = 1kΩ L 0 0 R = 150Ω L R = 150Ω L –3 –3 –6 –6 –9 –9 –12 –12 –15 –15 V = 200mV p-p V = 1V p-p IN IN –18 –18 0.1 1 10 100 0.1 1 10 100 FREQUENCY (MHz) FREQUENCY (MHz) Figure 6. Small Signal Frequency Response for Various Loads Figure 9. Large Signal Frequency Response for Various Loads 3 3 +V = 3.3V S +V = 3.3V S 0 0 +V = 5V S –3 –3 +V = 5V S –6 –6 –9 –9 –12 –12 –15 –15 V = 200mV p-p IN V = 1V p-p IN –18 –18 0.1 1 10 100 0.1 1 10 100 FREQUENCY (MHz) FREQUENCY (MHz) Figure 7. Small Signal Frequency Response for Various Supply Voltages Figure 10. Large Signal Frequency Response for Various Supply Voltages 3 3 0 0 –3 –3 –40°C –6 –6 –40°C –9 –9 +125°C –12 –12 –15 –15 +25°C +25°C –18 –18 +V = 3.3V S –21 –21 +125°C V = 1V p-p IN V = 200mV p-p R = 150Ω IN L –24 –24 1 10 100 1 10 100 FREQUENCY (MHz) FREQUENCY (MHz) Figure 8. Small Signal Frequency Response for Various Temperatures Figure 11. Large Signal Frequency Response for Various Temperatures Rev. C | Page 9 of 22 NORMALIZED GAIN (dB) NORMALIZED GAIN (dB) NORMALIZED GAIN (dB) 10020-006 10020-008 10020-005 NORMALIZED GAIN (dB) NORMALIZED GAIN (dB) NORMALIZED GAIN (dB) 10020-011 10020-013 10020-010 ADA4830-1/ADA4830-2 Data Sheet –25 7 V = 200mV p-p NO SERIES OUTPUT RESISTOR IN f = 5MHz 6 –30 5 –35 C = 68pF L 4 –40 3 C = 47pF L –45 +V = 3.3V +V = 5.0V 2 S S C = 22pF L –50 1 –55 0 –60 –1 C = 10pF L –65 –2 V = 1V p-p IN C = 0pF L R = 150Ω L –3 –70 –12 –10 –8 –6 –4 –2 0 2 4 6 8 10 12 14 0.1 1 10 100 FREQUENCY (MHz) INPUT COMMON-MODE VOLTAGE (V) Figure 12. Large Signal Frequency Response for Various Capacitor Loads Figure 15. Small Signal CMR vs. VINCM for Various Supply Voltages 0.1 0 V = 1V p-p IN ENA = 0V –10 0 –20 –0.1 –30 –0.2 –40 –0.3 –50 –0.4 –60 V = 1V p-p IN R = 150Ω L –0.5 –70 0.1 1 10 100 0.1 1 10 100 FREQUENCY (MHz) FREQUENCY (MHz) Figure 13. 0.1 dB Flatness Figure 16. Input-to-Output Isolation with Device Disabled –20 6 V = 1V p-p IN +V = 3.3V +V = 5.0V S S R = 1kΩ R = 1kΩ L L –30 V = +8V INCM 3 –40 0 +V = 5.0V S R = 150Ω L –50 –3 V = 0V INCM –60 +V = 3.3V –6 S V = −8V INCM R = 150Ω L –70 –9 –80 –12 V = 200mV p-p REF –90 –15 0.1 1 10 100 0.1 1 10 100 FREQUENCY (MHz) FREQUENCY (MHz) Figure 14. CMR Frequency Response for Various Input Common-Mode Figure 17. VREF to VOUT Frequency Response Voltages Rev. C | Page 10 of 22 COMMON-MODE REJECTION (dB) NORMALIZED GAIN (dB) NORMALIZED GAIN (dB) 10020-012 10020-014 10020-042 COMMON-MODE REJECTION (dB) GAIN (dB) NORMALIZED GAIN (dB) 10020-009 10020-019 10020-017 Data Sheet ADA4830-1/ADA4830-2 2.9 40 +V = 3.3V S V = 1V p-p R = 1kΩ L OUT 2.7 30 2.5 R = 150Ω L 20 2.3 10 +V = 3.3V S 2.1 0 1.9 +V = 5V S –10 1.7 1.5 –20 0 10 20 30 40 50 60 70 80 –12 –10 –8 –6 –4 –2 0 2 4 6 8 10 12 14 TIME (ns) INPUT COMMON-MODE VOLTAGE (V) Figure 18. Pulse Response at +VS = 3.3 V Figure 21. Output Offset Voltage (VOUT − VREF) vs. Input Common-Mode Voltage 16 10 C = 11pF STB 9 14 INP +V = 3.3V S 8 12 7 10 6 8 R = 500Ω STB 5 6 4 +V = 5V S 4 3 R = 5kΩ STB 2 2 R = 1kΩ STB 0 1 V V = FLOATING INP, INN –2 0 0 50 100 150 200 250 300 350 400 450 500 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 TIME (ns) ENABLE VOLTAGE (V) Figure 19. Short-to-Battery Output Flag Response for Various R , ADA4830-1 STB Figure 22. Supply Current vs. Enable Voltage 6 140 5 120 ENA 4 100 3 80 V OUT 2 60 1 40 0 20 –1 0 0 100 200 300 400 500 600 46 51 56 61 66 71 76 81 86 91 TIME (ns) CMR (dB) Figure 20. Enable Turn-on/Turn-off Time Figure 23. Typical Distribution of Common-Mode Rejection Rev. C | Page 11 of 22 VOLTAGE (V) OUTPUT VOLTAGE (V) VOLTAGE (V) 10020-024 10020-022 10020-020 SUPPLY CURRENT (mA) OUTPUT OFFSET VOLTAGE (mV) COUNT 10020-045 10020-033 10020-134 ADA4830-1/ADA4830-2 Data Sheet 10.0 –45 V = 2V p-p IN –50 9.5 9.0 –55 –60 8.5 –65 8.0 –70 7.5 –75 7.0 –80 6.5 –85 6.0 5.5 –90 –95 5.0 0.1 1 10 100 –40 –25 –10 5 20 35 50 65 80 95 110 125 TEMPERATURE (°C) FREQUENCY (MHz) Figure 27. Supply Current vs. Temperature Figure 24. Crosstalk (Output-to-Output) vs. Frequency, ADA4830-2 –40 4.0 V = 4V p-p V = 1V p-p IN OUT C = 10pF L –50 3.5 SINGLE-ENDED INPUT C = 0pF L HD2 C = 22pF L –60 3.0 SINGLE-ENDED INPUT HD3 –70 DIFFERENTIAL INPUT 2.5 HD2 –80 DIFFERENTIAL INPUT HD3 2.0 –90 1.5 –100 –110 1.0 0.01 0.1 1 10 0 10 20 30 40 50 60 70 80 90 100 FREQUENCY (MHz) TIME (ns) Figure 28. Harmonic Distortion Vs Frequency Figure 25. Pulse Response for Various Capacitor Loads 10 10k +V RIPPLE = 100mV p-p S 0 –10 C = 0.1µF VREF 1k –20 –30 C = 4.7µF VREF –40 100 –50 C = 10µF VREF –60 –70 10 10 100 1k 10k 100k 1M 10M 10 100 1k 10k 100k 1M 10M 100M FREQUENCY (Hz) FREQUENCY (Hz) Figure 29. PSR vs. Frequency for Various VREF Bypass Capacitors Figure 26. Total Output Voltage Noise vs. Frequency Rev. C | Page 12 of 22 VOLTAGE NOISE (nV/√Hz) V (V) OUT CROSSTALK (dB) 10020-046 10020-047 10020-048 SUPPLY CURRENT (mA) PSR (dB) DISTORTION (dBc) 10020-028 10020-029 10020-051 Data Sheet ADA4830-1/ADA4830-2 THEORY OF OPERATION CORE AMPLIFIER SHORT-TO-BATTERY OUTPUT FLAG At the core of the ADA4830-1 and ADA4830-2 are high speed, The short-to-battery output flag (STB pin) is functionally rail-to-rail op amps that are built on a 0.35 µm CMOS process. independent of the short-to-battery protection. Its purpose is Together with the core amplifier, the ADA4830-1 and ADA4830-2 to indicate an overvoltage condition on either input. Because combine four highly matched on-chip resistors into a difference protection is provided passively, it is always available; the flag amplifier function. Common-mode range extension at its inputs merely indicates the presence or absence of a fault condition. is achieved by employing a resistive attenuator. The closed-loop ESD PROTECTION differential to single-ended gain of the video channel is internally All pins on the ADA4830-1 and ADA4830-2 are protected with fixed at 0.50 V/V (−6 dB) to ensure compatibility with video internal ESD protection structures connected to the power supply decoders whose input range is constrained to 1 V p-p or less. pins (+VS and GND). These structures provide protection during The transfer function of the ADA4830-1 and ADA4830-2 is the handling and manufacturing process. V −V INP INN V = +V OUT REF The inputs (INN and INP) of the ADA4830-1 and ADA4830-2 2 can be exposed to dc voltages well above the supply voltage; where: therefore, conventional ESD structure protection cannot be used. V is the voltage at the output pin, VOUT. OUT The ADA4830-1 and ADA4830-2 employ Analog Devices, Inc., V and V are the input voltages at the INP and INN pins, INP INN proprietary ESD devices at the input pins (INN, INP) to allow respectively. for a wide common-mode voltage range and ESD protection VREF is the voltage at the VREF pin. well beyond the handling and manufacturing requirements. OVERVOLTAGE (SHORT-TO-BATTERY) The inputs of the ADA4830-1 and ADA4830-2 are ESD protected PROTECTION to survive ±8 kV human body model (HBM) Robust inputs guarantee that sensitive internal circuitry is not POWER SUPPLY PINS (ADA4830-2) subjected to extreme voltages or currents during a stressful event. A short-to-battery condition usually consists of a voltage on either As indicated in the Absolute Maximum Ratings section, the voltage difference between the +VS1 and +VS2 pins of the ADA4830-2 input (or both inputs) that is significantly higher than the power cannot exceed 0.5 V. To ensure compliance with the Absolute supply voltage of the amplifier. Duration may vary from a short Maximum Ratings, it is recommended that these supply pins be transient to a continuous fault. connected together to the same power supply source. The ADA4830-1 and ADA4830-2 can withstand voltages of up to 18 V on the inputs. Critical internal nodes are protected from exposure to high voltages by circuitry that clamps the inputs at a safe level and limits internal currents. This protection is available whether the device is enabled or disabled, even when the supply voltage is removed. Rev. C | Page 13 of 22 ADA4830-1/ADA4830-2 Data Sheet APPLICATIONS INFORMATION Fully Differential Mode METHODS OF TRANSMISSION The differential inputs of the ADA4830-1 and ADA4830-2 allow Pseudo Differential Mode (Unbalanced Source full balanced transmission using a differential source. In this Termination) configuration, the differential input termination is equal to twice The ADA4830-1 and ADA4830-2 can be operated in a pseudo the source impedance of each output. For example, a source differential configuration with an unbalanced input signal. This with 37.5 Ω back termination resistors in each leg should be allows the receiver to be driven by a single-ended source. Pseudo terminated with a differential resistance of 75 Ω. An illustration differential mode uses a single conductor to carry an unbalanced of this arrangement is shown in Figure 32. signal and connects the negative input terminal to the ground reference of the source. DRIVER PCB Use the positive wire or coaxial center conductor to connect the POSITIVE WIRE 37.5Ω INP + source output to the positive input (INP) of the ADA4830-1 or DIFFERENTIAL 75Ω ADA4830-1 ADA4830-2. Next, connect the negative wire or coaxial shield from AMPLIFIER 37.5Ω − the negative input (INN) back to a ground reference on the source INN NEGATIVE WIRE printed circuit board (PCB). The input termination should match the source impedance and be referenced to the remote ground. Figure 32. Fully Differential Mode An example of this configuration is shown in Figure 30. VOLTAGE REFERENCE (VREF PIN) DRIVER PCB An internal reference level (VREF) determines the output voltage POSITIVE WIRE when the differential input voltage is zero. A resistor divider 75Ω INP SINGLE-ENDED + AMPLIFIER connected between the supply rails sets the VREF voltage. Built 75Ω ADA4830-1 with a pair of matched 40 kΩ resistors, the divider sets this − INN voltage to +V /2. S NEGATIVE WIRE The voltage reference pin (VREF) normally floats at its default Figure 30. Pseudo Differential Mode value of +V /2. However, it can be used to vary the output S reference level from this default value. A voltage applied to VREF Pseudo Differential Mode (Balanced Source Impedance) appears at the output with unity gain, within the bandwidth limit Pseudo differential signaling is typically implemented using of the internal reference buffer. Figure 17 shows the frequency unbalanced source termination, as shown in Figure 30. With response of the VREF input. this arrangement, however, common-mode signals on the Any noise on the +V supply rail appears at the output with only positive and negative inputs receive different attenuation due to S 6 dB of attenuation (the divide-by-two provided by the reference unbalanced termination at the source. This effectively converts divider). Even when this pin is floating, it is recommended that some of the common-mode signal into differential mode signal, an external capacitor be connected from the reference node to degrading the overall common-mode rejection of the system. ground to provide further attenuation of noise on the power supply System common-mode rejection can be improved by balancing line. A 4.7 µF capacitor combined with the internal 40 kΩ resistor the output impedance of the driver, as shown in Figure 31. sets the low-pass corner at under 1 Hz and results in better than Splitting the source termination resistance evenly between the 40 dB of supply noise attenuation at 100 Hz. hot and cold conductors results in matched attenuation of the common-mode signals, ensuring maximum rejection. DRIVER PCB POSITIVE WIRE 37.5Ω INP + SINGLE-ENDED AMPLIFIER 75Ω ADA4830-1 37.5Ω − INN NEGATIVE WIRE Figure 31. Pseudo Differential Mode with Balanced Source Impedance Rev. C | Page 14 of 22 10020-035 10020-034 10020-036 Data Sheet ADA4830-1/ADA4830-2 In the falling direction, the speed with which the flag output INPUT COMMON-MODE RANGE responds primarily depends on the external capacitance attached to In a standard four resistor difference amplifier with 0.50 V/V this node and the sink current that can be provided. For example, if gain, the input common-mode (CM) range is three times the CM the load is 10 pF, and the external pull-up voltage is 3.3 V, the fall range of the core amplifier. In the ADA4830-1 and ADA4830-2, time is a few nanoseconds. In the rising direction, the speed is however, the input CM range has been extended to more than 18 V determined by external capacitance and the magnitude of the (with a 5 V supply). The input CM range can be approximated pull-up resistor. For the case of 10 pF of external capacitance by using the following formulas: and a pull-up of 5 kΩ, the time constant of the rising edge is For the maximum CM voltage, approximately 50 ns. 5(+VS − 1.25) − 4VREF ≈ VINCM(MAX) ≤ 9.5 V Table 8. STB Pin Function For the minimum CM voltage, STB Pin Output Device State High (Logic 1) Normal operation −10 V ≤ VINCM(MIN) ≈ − (1 + 4VREF) Low (Logic 0) STB fault condition Approximate minimum and maximum CM voltages are shown in Table 7 for several common supply voltages. ENABLE/DISABLE MODES (ENA PIN) The power-down, or enable/disable (ENA) pin, is internally pulled Table 7. Input Common-Mode Range Examples up to +V through a 250 kΩ resistor. When the voltage on this S +V (V) V (V) V (V) V (V) S REF INCM(MIN) INCM(MAX) pin is high, the amplifier is enabled; pulling ENA low disables 1 3.0 1.5 –7.0 2.8 the channel. With no external connection, this pin floats high, 3.0 0.97 –4.9 4.9 enabling the amplifier channel. 1 3.3 1.65 –7.6 3.6 3.3 1.15 –5.6 5.6 Table 9. ENA Pin Function 1 3.6 1.8 –8.2 4.5 ENA Pin Input Device State 3.6 1.34 –6.4 6.4 High (Logic 1) Enabled 1 5.0 2.5 –10 8.7 Low (Logic 0) Disabled 5.0 2.22 –9.9 9.5 High-Z (Floating) Normal operation 1 Floating (default condition). PCB LAYOUT 15 As with all high speed applications, attention to PCB layout is of VREF PIN FLOATING paramount importance. Adhere to standard high speed layout 10 practices in designs using the ADA4830-1 and ADA4830-2. A V INCM (MAX) solid ground plane is recommended, and placing a 0.1 µF surface- 5 mount, ceramic power supply, decoupling capacitor as close as possible to the supply pin(s) is recommended. 0 Connect the GND pin(s) to the ground plane with a trace that is as short as possible. In cases where the ADA4830-1 and ADA4830-2 –5 drive transmission lines, series terminate the outputs and use controlled impedance traces of the shortest length possible to –10 V INCM (MIN) connect to the signal I/O pins, which should not pass over any voids in the ground plane. –15 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 SUPPLY VOLTAGE (V) EXPOSED PADDLE (EPAD) CONNECTION Figure 33. Input Common-Mode Range vs. Supply Voltage The ADA4830-1 and ADA4830-2 have an exposed thermal pad (EPAD) on the bottom of the package. This pad is not electrically SHORT-TO-BATTERY OUTPUT FLAG PIN connected to the die and can be left floating or connected to the The flag output (STB) is an active low, open-drain logic ground plane. Should heat dissipation be a concern, thermal configuration. A low level on this output indicates that an resistance can be minimized by soldering the EPAD to a overvoltage event has been detected on either the positive or metalized pad on the PCB. Connect this pad to the ground the negative input or both. Flags from multiple chips can be plane with multiple vias. Note that the thermal resistance (θ ) JA wire-OR'ed to form a single fault detection signal. The output is of the device is specified with the EPAD soldered to the PCB. driven by a grounded source NMOS device, capable of sinking approximately 10 mA while pulling within a few hundred millivolts above ground. The output high level is set with an external pull-up resistor connected to the supply voltage of the logic family that is used to monitor the state of the flag. Rev. C | Page 15 of 22 INPUT COMMON-MODE VOLTAGE (V) 10020-037 ADA4830-1/ADA4830-2 Data Sheet wired together. High speed video op amps have all the key features USING THE ADA4830-2 AS A LOW COST VIDEO required to make them ideal for this function. Their high input SWITCH impedance does not affect the characteristic impedance of the Figure 34 shows a video multiplexer/switch using the ADA4830-2, transmission line, thus allowing back termination. They also have dual, high speed difference amplifier. This circuit allows the user inherently good video specifications, including differential gain and to input two remote video sources into a single channel of a video phase, slew rate, bandwidth, and 0.1 dB flatness. decoder, such as the ADV7180. Each channel of the ADA4830-2 is a high speed difference Traditional CMOS multiplexers and switches suffer several amplifier circuit that eliminates common-mode noise and phase disadvantages at video frequencies where their on-resistance noise caused by ground potential differences between the incoming introduces distortion, degrades differential gain and phase video signal and the receiver. The ADA4830-2 also offers integrated performance, and interacts with the termination resistor to short-to-battery protection and heightened ESD tolerance in a attenuate the incoming video signal and affect the luminance. small foot print. The fault detection output (the STB pins) of the System designers generally address these issues by adding ADA4830-2 allows for proactive wire diagnostics when connected external buffers to add gain and increase drive capability. to a microcontroller or video decoder and are used to generate Video multiplexing can be simplified by using high speed video an interrupt during a fault condition. amplifiers with a disable/enable function (sometimes called power- down). When the amplifier is disabled, its output stage goes into a high impedance state, allowing several amplifier outputs to be +V S ENABLE1 (INPUT) + 0.1µF 2.2µF +V S 4.7µF 16 15 14 13 5kΩ 5kΩ 1 12 75Ω INP1 VOUT1 75Ω DIFFERENTIAL 75Ω INPUT 1 2 11 STB1 INN1 ADA4830-2 CONNECT STB FLAGS TO VIDEO (OUTPUTS) DECODER 3 10 INN2 STB2 75Ω DIFFERENTIAL 75Ω INPUT 2 75Ω 4 9 VOUT2 INP2 5 6 7 8 4.7µF 0.1µF ENABLE2 (INPUT) +V S Figure 34. Low Cost Video Switch Using the ADA4830-2 Rev. C | Page 16 of 22 VREF2 VREF1 GND2 GND1 +VS2 +VS1 ENA2 ENA1 10020-049 Data Sheet ADA4830-1/ADA4830-2 Another method of reducing the resonant peaking caused by DRIVING CAPACITIVE LOADS driving large capacitive loads at the output of the ADA4830-1 The ADA4830-1 and ADA4830-2 are capable of driving large and ADA4830-2 is with the use of a R-C shunt circuit or a snubber capacitive loads while maintaining its rated performance. circuit. This method acts to resistively load the amplifier output, Several performance curves vs. capacitive load are shown in thus reducing frequency response peaking. One drawback to this Figure 12 and Figure 25. Capacitive loads interact with an op amp’s approach is a slight loss of signal bandwidth. Figure 37 shows a output impedance to create an extra delay in the feedback path. simple circuit representation of the implementation of the R-C This reduces circuit stability and can cause unwanted ringing snubber circuit with R and C . Figure 38 shows the effects of SNT SNT and oscillation. a R-C snubber circuit driving 47 pF, where R = 73.2 Ω and C SNT SNT The capacitive load drive of the ADA4830-1and ADA4830-2 can = 0.1 µF. be increased by adding a low valued resistor, RS, in series with the capacitive load. Figure 35 shows the test circuit. – ADA4830-1 – R = 49.9Ω S + R = 1kΩ C = 47pF R = 73.2Ω L L SNT ADA4830-1 C = 0.1uF SNT + C = 47pF R = 1kΩ L L Figure 37. R-C Test Circuit 4.0 +V = 5V NO SNUBBER S Figure 35. R Test Circuit S R = 1kΩ CIRCUIT L C = 47pF L 3.5 Introducing a series resistor tends to isolate the capacitive load from the feedback loop, thereby diminishing its influence. One R = 73.2Ω SNT C = 0.1µF SNT 3.0 drawback to this approach is a slight loss of signal amplitude. Figure 36 shows the effects of a series resistor on the capacitive 2.5 drive. For very large capacitive loads, the frequency response of the amplifier is dominated by the roll-off of the series resistor 2.0 and capacitive load. 4.0 +V = 5V S NO R 1.5 S R = 1kΩ L C = 47pF L 3.5 1.0 R = 49.9Ω 0 50 100 150 200 250 S 3.0 TIME (ns) Figure 38. Pulse Response With and Without R-C Snubber Circuit 2.5 2.0 1.5 1.0 0 50 100 150 200 250 TIME (ns) Figure 36. Pulse Response With and Without Series Resistor Rev. C | Page 17 of 22 V (V) OUT 10020-052 10020-135 V (V) OUT 10020-053 10020-137 ADA4830-1/ADA4830-2 Data Sheet TYPICAL APPLICATIONS CIRCUITS +V STB FLAG S (OUTPUT) (2.9V TO 5.5V) ENABLE (INPUT) 5kΩ + 2.2µF 0.1µF ENA +VS STB +VS VREF ×1 DRIVER PCB 4.7µF POSITIVE WIRE 75Ω INP + SINGLE ENDED TO VIDEO AMPLIFIER DECODER VOUT 75Ω 0.1µF − INN NEGATIVE WIRE ADA4830-1 GND Figure 39. Typical Application with Pseudo Differential Input STB FLAG +V S (OUTPUT) ENABLE (2.9V TO 5.5V) (INPUT) 5kΩ + 2.2µF 0.1µF ENA +VS STB +VS VREF ×1 DRIVER PCB 4.7µF 37.5Ω INP + TO VIDEO DECODER VOUT DIFFERENTIAL 75Ω AMPLIFIER 0.1µF − INN 37.5Ω ADA4830-1 GND Figure 40. Typical Application with Fully Differential Input Rev. C | Page 18 of 22 10020-039 10020-038 Data Sheet ADA4830-1/ADA4830-2 +V STB FLAG S (OUTPUT) (2.9V TO 5.5V) ENABLE (INPUT) 5kΩ D _1.8V D A _1.8V VDD VDDIO VDD + 2.2µF 0.1µF 0.1µF 10nF 0.1µF 10nF 0.1µF 10nF ENA +VS STB +VS P _1.8V VDD D _3.3V VDD VREF D _1.8V VDD ×1 A _1.8V 0.1µF 10nF VDD 4.7µF + INP VOUT 19 P[0:7] A 1 75Ω IN 0.1µF 23 A 2 IN INN − 24 16 P0 A 3 P0 IN ADA4830-1 15 P1 P1 25 10 P2 YCrCb RESET P2 RESET GND 9 P3 8-BIT P3 KEEP VREFN AND VREFP CAPACITORS AS CLOSE AS 8 P4 656 DATA P4 POSSIBLE TO THE ADV7180 AND ON THE SAME SIDE 7 P5 P5 OF THE PCB AS THE ADV7180. 6 P6 P6 21 5 P7 P7 VREFN 0.1µF 20 VREFP 0.1µF LOCATE CLOSE TO, AND ON THE SAME SIDE AS, THE ADV7180 ADV7180 13 XTAL 11 LLC LLC 47pF 32 28.63636MHz 1MΩ INTRQ INTRQ 4 12 SFL SFL XTAL1 31 47pF VS/FIELD VS/FIELD 1 D HS HS VDDIO 4kΩ 26 P _1.8V VDD ALSB EXTERNAL 2 ALSB TIED HI ≥ I C ADDRESS = 0x42 LOOP FILTER 2 ALSB TIED LOW ≥ I C ADDRESS = 0x40 10nF 17 ELPF 82nF 28 SCLK SCLK 1.69kΩ 27 SDA SDATA KEEP CLOSE TO THE ADV7180 AND ON THE SAME SIDE OF PCB AS THE ADV7180. Figure 41. ADA4830-1 Driving an ADV7180 Video Decoder The common-mode rejection vs. frequency, shown in Figure 14, The ADA4830-1 and ADA4830-2 are differential receivers whose typically 65 dB at low frequencies, enables the recovery of video overall performance is independent of the transmitter IC used signals in the presence of large common-mode noise. The high and whether the transmission line is ac-coupled or dc-coupled. input impedance permits the ADA4830-1 and ADA4830-2 to The ADA4830-1 and ADA4830-2 are specifically designed to operate as a bridging amplifier across low impedance terminations perform as differential line receivers. The circuit in Figure 41 with negligible loading. shows a detailed schematic of the ADA4830-1 and the ADV7180 configured for this function. The signal is received differentially relative to the common of the source circuitry, and that voltage is exactly reproduced with an attenuating gain of 0.50 V/V. This is designed to keep the video signal within the allowed range of the video decoder, which is typically 1 V p-p or less. Rev. C | Page 19 of 22 DVDDIO 3 2 DGND DVDD 14 29 DGND DVDD 30 AVDD 22 PVDD 18 10020-040 ADA4830-1/ADA4830-2 Data Sheet reference levels at the transmitter and receiver is within the FULLY DC-COUPLED TRANSMISSION LINE common-mode range of the receiver, very little current flow The wide input common-mode range and high input impedance of results, and no image degradation should be anticipated. the ADA4830-1 and ADA4830-2 allow them to be used in fully dc-coupled transmission line applications in which there may be a Figure 42 shows an example configuration of a completely dc- significant discrepancy between voltage levels at the ground pins of coupled transmission using a low impedance differential driver. the driver and receiver. As long as the voltage difference between +V STB FLAG S (OUTPUT) +V (2.9V TO 5.5V) ENABLE STB FLAG ENABLE S (INPUT) (2.7V TO 3.6V) (OUTPUT) (INPUT) 5kΩ + + 2.2µF 0.1µF 2.2µF 0.1µF ENA +VS STB ENA +VS STB +VS FROM IMAGER VREF ×1 OR VIDEO ENCODER 75Ω 4.7µF +IN TWISTED PAIR LPF –OUT 37.5Ω INP − + R TO VIDEO T DECODER VOUT 75Ω 37.5Ω 0.1µF + − INN +V +OUT S –IN ADA4830-1 LPF GND GND Figure 42. Differential Video Filter Driver and ADA4830-1 Difference Amplifier Rev. C | Page 20 of 22 10020-041 Data Sheet ADA4830-1/ADA4830-2 PACKAGING AND ORDERING INFORMATION OUTLINE DIMENSIONS 2.44 2.34 3.10 2.24 3.00 SQ 0.50 BSC 2.90 5 8 PIN 1 INDEX EXPOSED 1.70 PAD AREA 1.60 1.50 0.50 0.40 0.30 4 1 TOP VIEW BOTTOM VIEW FOR PROPER CONNECTION OF 0.80 THE EXPOSED PAD, REFER TO 0.05 MAX 0.75 THE PIN CONFIGURATION AND 0.02 NOM 0.70 FUNCTION DESCRIPTIONS COPLANARITY SECTION OF THIS DATA SHEET. 0.08 SEATING 0.30 PLANE 0.203 REF 0.25 0.20 COMPLIANT TOJEDEC STANDARDS MO-229-WEED Figure 43. 8-Lead Lead Frame Chip Scale Package [LFCSP_WD] 3 mm × 3 mm Body, Very Very Thin, Dual Lead (CP-8-11) Dimensions shown in millimeters 3.10 0.30 3.00 SQ 0.23 2.90 0.18 PIN 1 INDICATOR 13 16 0.50 1 12 BSC EXPOSED 1.75 PAD 1.60 SQ 1.45 9 4 8 5 0.50 0.25 MIN TOP VIEW BOTTOM VIEW 0.40 0.30 FOR PROPER CONNECTION OF 0.80 THE EXPOSED PAD, REFER TO 0.75 0.05 MAX THE PIN CONFIGURATION AND 0.70 FUNCTION DESCRIPTIONS 0.02 NOM SECTION OF THIS DATA SHEET. COPLANARITY SEATING 0.08 PLANE 0.20 REF COMPLIANT TO JEDEC STANDARDS MO-220-WEED-6. Figure 44. 16-Lead Lead Frame Chip Scale Package [LFCSP_WQ] 3 mm × 3 mm Body, Very Very Thin Quad (CP-16-22) Dimensions shown in millimeters ORDERING GUIDE Package Ordering 1, 2 Model Temperature Range Package Description Option Branding Quantity ADA4830-1BCP-EBZ Evaluation Board ADA4830-1BCPZ-R7 −40°C to +125°C 8-Lead Lead Frame Chip Scale Package [LFCSP_WD] CP-8-11 H30 1500 ADA4830-1WBCPZ-R7 −40°C to +125°C 8-Lead Lead Frame Chip Scale Package [LFCSP_WD] CP-8-11 4H1 1500 ADA4830-1BCPZ-R2 −40°C to +125°C 8-Lead Lead Frame Chip Scale Package [LFCSP_WD] CP-8-11 H30 250 ADA4830-2BCPZ-R7 −40°C to +125°C 16-Lead Lead Frame Chip Scale Package [LFCSP_WQ] CP-16-22 H31 1500 ADA4830-2BCPZ-R2 −40°C to +125°C 16-Lead Lead Frame Chip Scale Package [LFCSP_WQ] CP-16-22 H31 250 ADA4830-2WBCPZ-R7 −40°C to +125°C 16-Lead Lead Frame Chip Scale Package [LFCSP_WQ] CP-16-22 4H2 1500 1 Z = RoHS Compliant Part. 2 W = Qualified for Automotive Applications. Rev. C | Page 21 of 22 PIN 1 INDICATOR (R 0.15) PIN 1 INDICATOR 01-24-2011-B 08-16-2010-E ADA4830-1/ADA4830-2 Data Sheet AUTOMOTIVE PRODUCTS The ADA4830-1W and ADA4830-2W models are available with controlled manufacturing to support the quality and reliability requirements of automotive applications. Note that these automotive models may have specifications that differ from the commercial model; therefore, designers should review the Specifications section of this data sheet carefully. Only the automotive grade products shown are available for use in automotive applications. Contact your local Analog Devices account representative for specific product ordering information and to obtain the specific Automotive Reliability reports for these models. ©2011–2012 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. www.analog.com/ADA4830-1/ADA4830-2 D10020-0-6/12(C) Rev. C | Page 22 of 22
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the ADA4830-1 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Manufacturers


What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods