Elite.Parts Manufacturers A ANALOG DEVICES ADA4627-1
About product Specifications Datasheet FAQ

ANALOG DEVICES ADA4627-1

Description

Analog Devices ADA4627-1 36V, 19 MHZ, Low Noise, Wide Bandwidth Precision Amplifier

Part Number

ADA4627-1

Price

Request Quote

Manufacturer

ANALOG DEVICES

Lead Time

Request Quote

Category

PRODUCTS - A

Specifications

# OpAmps per Pkg

1

-3dB Bandwidth>

19MHz

Ib

1pA

Input Noise (nV/rtHz)

6.1nV/rtHz

Isy per Amplifier

7mA

Packages

CSP,SOIC

Slew Rate

40V/µs

Vcc-Vee

10V to 30V

Vos

70µV

Datasheet

pdf file

ADA4627-1-975889367.pdf

675 KiB

Extracted Text

30 V, High Speed, Low Noise, Low Bias Current, JFET Operational Amplifier ADA4627-1/ADA4637-1 FEATURES PIN CONFIGURATIONS Low offset voltage: 200 µV maximum NULL 1 8 NC Offset drift: 1 µV/°C typical ADA4627-1 –IN 2 7 V+ Very low input bias current: 5 pA maximum +IN 3 6 OUT TOP VIEW (Not to Scale) V– 4 5 NULL Extended temperature range: −40°C to +125°C ±5 V to ±15 V dual supply NC = NO CONNECT ADA4627-1 GBW: 19 MHz Figure 1. 8-Lead SOIC_N (R-8) ADA4637-1 GBW: 79 MHz Voltage noise: 6.1 nV/√Hz at 1 kHz NULL 1 8 NC ADA4627-1 slew rate: 82 V/µs ADA4637-1 –IN 2 7 V+ ADA4637-1 slew rate: 170 V/µs +IN 3 6 OUT TOP VIEW High gain: 120 dB typical (Not to Scale) V– 4 5 NULL High CMRR: 116 dB typical NC = NO CONNECT High PSRR: 112 dB typical Figure 2. 8-Lead SOIC_N (R-8) APPLICATIONS High impedance sensors PIN 1 NC 1 8 NC INDICATOR Photodiode amplifier –IN 2 ADA4627-1/ 7 V+ Precision instrumentation ADA4637-1 6 OUT +IN 3 TOP VIEW Phase-locked loop filters V– 4 5 NC (Not toScale) High end, professional audio DAC output amplifier NOTES 1. NC = NO CONNECT. ATE 2. IT IS RECOMMENDED THAT THE EXPOSED PAD BE Medical CONNECTED TO V–. Figure 3. 8-Lead LFCSP_VD (CP-8-2) GENERAL DESCRIPTION The ADA4627-1/ADA4637-1 are wide bandwidth precision The ADA4627-1/ADA4637-1 are specified for both the amplifiers featuring low noise, very low offset, drift, and bias industrial temperature range of −25°C to +85°C and the current. The parts operate from ±5 V to ±15 V dual supply. extended industrial temperature range of −40°C to +125°C. The ADA4627-1/ ADA4637-1 are available in tiny 8-lead LFCSP The ADA4627-1/ADA4637-1 provide benefits previously found and 8-lead SOIC packages. in few amplifiers. These amplifiers combine the best specifications of precision dc and high speed ac op amps. The ADA4637-1 is The ADA4627-1/ADA4637-1 are members of a growing series a decompensated version of the ADA4627-1 and is stable at a of high speed, precision op amps offered by Analog Devices, noise gain of 5 or greater. Inc. (see Table 1). With a typical offset voltage of only 70 µV, drift of less than 1 µV/°C, and noise of only 0.86 µV p-p (0.1 Hz to 10 Hz), the ADA4627-1/ADA4637-1 are suited for applications where error sources cannot be tolerated. Table 1. High Speed Precision Op Amps Supply 5 V Low Cost 5 V 26 V Low Power 30 V Low Cost 30 V Single AD8615 AD8651 AD8610 AD8510 ADA4627-1/ADA4637-1 Dual AD8616 AD8652 AD8620 AD8512 Quad AD8618 AD8513 Rev. D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. rights of third parties that may result from its use. Specifications subject to change without notice. No Tel: 781.329.4700 www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. Fax: 781.461.3113 ©2009-2010 Analog Devices, Inc. All rights reserved. 07559-002 07559-103 07559-001 ADA4627-1/ADA4637-1 TABLE OF CONTENTS Features .............................................................................................. 1 Input Voltage Range ................................................................... 14 Applications ....................................................................................... 1 Input Offset Voltage Adjust Range........................................... 14 Pin Configurations ........................................................................... 1 Input Bias Current ...................................................................... 14 General Description ......................................................................... 1 Noise Considerations ................................................................. 14 Revision History ............................................................................... 2 THD + N Measurements ........................................................... 15 Specifications ..................................................................................... 3 Printed Circuit Board Layout, Bias Current, and Bypassing 15 Electrical Characteristics—30 V Operation ............................. 3 Output Phase Reversal ............................................................... 15 Absolute Maximum Ratings ............................................................ 5 Decompensated Op Amps ........................................................ 16 Thermal Resistance ...................................................................... 5 Driving Capacitive Loads .......................................................... 16 ESD Caution .................................................................................. 5 Outline Dimensions ....................................................................... 17 Typical Performance Characteristics ............................................. 6 Ordering Guide .......................................................................... 18 Theory of Operation ...................................................................... 14 REVISION HISTORY 10/10—Rev. C to Rev. D 10/09—Rev. A to Rev. B Changes to Figure 1 and General Description.............................. 1 Changes to Figure 2 ........................................................................... 1 Changes to Ordering Guide .......................................................... 18 9/09—Rev. 0 to Rev. A 7/10—Rev. B to Rev. C Changes to General Description Section ....................................... 1 Added ADA4637-1 ............................................................. Universal Changes to Table 2 ............................................................................. 3 Added Figure 2; Renumbered Sequentially .................................. 1 Updated Outline Dimensions ....................................................... 14 Changes to Table 2 ............................................................................ 3 Changes to Ordering Guide .......................................................... 15 Change to Table 3 ............................................................................. 5 7/09—Revision 0: Initial Version Changes to Typical Performance Characteristics Section ........... 6 Updated Outline Dimensions ....................................................... 17 Changes to Ordering Guide .......................................................... 18 Rev. D | Page 2 of 20 ADA4627-1/ADA4637-1 SPECIFICATIONS ELECTRICAL CHARACTERISTICS—30 V OPERATION V = ±15 V, V = 0 V, T = 25°C, unless otherwise noted. SY CM A Table 2. B Grade A Grade Parameter Symbol Test Conditions/Comments Min Typ Max Min Typ Max Unit INPUT CHARACTERISTICS 1 Offset Voltage V 70 200 120 300 µV OS −40°C ≤ T ≤ +85°C 350 410 µV A −40°C ≤ T ≤ +125°C 400 660 µV A Offset Voltage Drift, ∆V /∆T −40°C ≤ T ≤ +125°C 1 2 1 3 µV/°C OS A Average Power Supply Rejection PSRR V = ±4.5 V to ±18 V 106 112 103 108 dB SY Ratio −40°C ≤ T ≤ +125°C 101 99 dB A 2 Input Bias Current I 1 5 1 5 pA B −40°C ≤ T ≤ +85°C 0.5 0.5 nA A −40°C ≤ T ≤ +125°C 2 2 nA A Input Offset Current I 0.5 5 0.5 5 pA OS −40°C ≤ T ≤ +85°C 0.5 0.5 nA A −40°C ≤ T ≤ +125°C 2 2 nA A NOISE PERFORMANCE Voltage Noise Density e f = 10 Hz 16.5 40 16.5 40 nV/√Hz n f = 100 Hz 7.9 20 7.9 20 nV/√Hz f = 1 kHz 6.1 8 6.1 8 nV/√Hz f = 10 kHz 4.8 6 4.8 6 nV/√Hz Voltage Noise e p-p 0.1 Hz to 10 Hz 0.7 1.6 0.7 1.6 µV p-p n Current Noise Density i f = 100 Hz 1.6 2.5 fA/√Hz n Current Noise i p-p 0.1 Hz to 10 Hz 30 48 fA p-p n Input Resistance R 10 10 TΩ IN Input Capacitance, C 8 8 pF INDM Differential Mode Input Capacitance, C 7 7 pF INCM Common Mode Input Voltage Range IVR −11 +11 −11 +11 V −40°C ≤ T ≤ +125°C −10.5 +10.5 −10.5 +10.5 V A Common-Mode CMRR T = 25°C, 106 116 100 110 dB A Rejection Ratio V = −11 V to +11 V CM −40°C ≤ T ≤ +125°C, 98 97 A V = −10.5 V to +10.5 V dB CM Large Signal Voltage Gain A R = 1 kΩ, V = −10 V to +10 V 112 120 106 120 dB VO L O −40 ≤ T ≤ +85°C 110 104 dB A −40 ≤ T ≤ +125°C 102 100 dB A DYNAMIC PERFORMANCE 3 3 Slew Rate ADA4627-1 SR ±10 V step, R = 1 kΩ, 40 56/78 40 56/78 V/µs L C = 100 pF, A = +1 L V 3 3 SR ±10 V step, R = 1 kΩ, C = 100 pF, 40 82/84 40 82/84 V/µs L L R = R = 1 kΩ, A = −1 s f V Slew Rate ADA4637-1 SR ±10 V out, C = 4.8 pF, A = −4 170 170 V/µs f V SR ±10 V out, C = 4.8 pF, A = +5 170 170 V/µs f V Rev. D | Page 3 of 20 ADA4627-1/ADA4637-1 B Grade A Grade Parameter Symbol Test Conditions/Comments Min Typ Max Min Typ Max Unit Settling Time to 0.01% t S ADA4627-1 V = 10 V step, C = 35 pF, 550 550 ns IN L R = +1 kΩ, A = −1 L V ADA4637-1 V = 10 V step, C = 35 pF, 300 300 ns IN L = +1 kΩ, A = −4 R L V Settling Time to 0.1% t S ADA4627-1 V = 10 V step, C = 35 pF, 450 450 ns IN L R = +1 kΩ, A = −1 L V ADA4637-1 V = 10 V step, C = 35 pF, 200 200 ns OUT L = +1 kΩ, A = −4 R L V Gain Bandwidth Product GBP 4 4 ADA4627-1 R = 1 kΩ, C = 20 pF, A = 1 16 19 16 19 MHz L L V ADA4637-1 A = 10 79.9 79.9 V Phase Margin Φ M ADA4627-1 R = 1 kΩ, C = 20 pF, A = 1 72 72 Degrees L L V ADA4637-1 A = 10 85 85 V Total Harmonic THD + N f = 1 kHz, A = 1, ADA4627-1 0.000045 0.000045 % V Distortion + Noise POWER SUPPLY Supply Current per I I = 0 mA ±7.0 ±7.5 ±7.0 ±7.5 mA SY O Amplifier −40°C ≤ T ≤ +125°C ±7.8 ±7.8 mA A OUTPUT CHARACTERISTICS Output Voltage High V R = 1 kΩ to V 12.0 12.3 12.0 12.3 V OH L CM −40°C ≤ T ≤ +85°C 11.8 11.8 V A −40°C ≤ T ≤ +125°C 11.7 11.7 V A Output Voltage Low V R = 1 kΩ to V −12.7 −12.3 −12.7 −12.3 V OL L CM −40°C ≤ T ≤ +85°C −12.1 −12.1 V A −40°C ≤ T ≤ +125°C −12.0 −12.0 V A Output Current I V = ±10 V ±45 ±45 mA OUT O Short-Circuit Current I T = 25°C +70/−55 +70/−55 mA SC A Closed-Loop Output Z f = 1 MHz, A = −100 41 41 Ω OUT V Impedance 1 V is measured fully warmed up. OS 2 Tested/extrapolated from 125°C. 3 Rising/falling. 4 Not tested. Guaranteed by simulation and characterization. Rev. D | Page 4 of 20 ADA4627-1/ADA4637-1 ABSOLUTE MAXIMUM RATINGS THERMAL RESISTANCE Table 3. θ is specified for the worst-case conditions, that is, a device JA Parameter Rating soldered in a circuit board for surface-mount packages. This Supply Voltage 36 V was measured using a standard 2-layer board. For the LFCSP 1 Input Voltage Range (V−) − 0.3 V to (V+) + 0.3 V package, the exposed pad should be soldered to a copper plane. 1 Input Current ±10 mA 2 Differential Input Voltage ±V SY Table 4. Thermal Resistance Output Short-Circuit Duration to GND Indefinite Package Type θ θ Unit JA JC Storage Temperature Range −65°C to +150°C 8-Lead SOIC_N (R-8) 155 45 °C/W Operating Temperature Range −40°C to +125°C 8-Lead LFCSP (CP-8-2) 77 14 °C/W Junction Temperature Range −65°C to +150°C Lead Temperature (Soldering, 60 sec) 300°C ESD CAUTION ESD Human Body Model 4 kV 1 Input pin has clamp diodes to the power supply pins. Input current should be limited to 10 mA or less whenever input signals exceed the power supply rail by 0.3 V. 2 Differential input voltage is limited to ±30 V or the supply voltage, whichever is less. Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Rev. D | Page 5 of 20 ADA4627-1/ADA4637-1 TYPICAL PERFORMANCE CHARACTERISTICS T = 25°C, unless otherwise noted. A 100 120 100 80 60 78° 10 40 20 0 ADA4627-1 19.1MHz ADA4627-1 T = 25°C A –20 T = 25°C A V = ±15V SY V = ±15V SY 1 –40 0.01 0.1 1 10 1k 10k 100k 1M 10M 100M FREQUENCY (kHz) FREQUENCY (Hz) Figure 7. Open-Loop Gain and Phase vs. Frequency Figure 4. Voltage Noise Density vs. Frequency 100 140 R = 1kΩ L 10 120 A = –10 V R = 600Ω L 1 100 A = –100 V A = –1 V 0.1 80 ADA4627-1 ADA4627-1 T = 25°C T = 25°C A A V = ±15V V = ±15V SY SY V = ±11V O 0.01 60 100 1k 10k 100k 1M 10M 100M –50 –25 0 25 50 75 100 125 FREQUENCY (Hz) TEMPERATURE (°C) Figure 8. Closed-Loop Z vs. Frequency Figure 5. Open-Loop Gain vs. Temperature OUT 150 120 100 100 50 80 0 60 –50 40 ADA4627-1 T = 25°C ADA4627-1 –100 20 A V = ±15V T = 25°C SY A V = ±15V SY –150 0 –15 –10 –5 0 5 10 15 100 1k 10k 100k 1M 10M V (V) FREQUENCY (Hz) CM Figure 6. CMRR vs. Frequency Figure 9. V vs. Common-Mode Voltage OS Rev. D | Page 6 of 20 OPEN-LOOP GAIN (dB) VOLTAGE NOISE DENSITY (nV/√Hz) CMRR (dB) 07559-010 07559-004 07559-003 GAIN (dB) AND PHASE (Degrees) V (µV) Z (Ω) OS OUT 07559-069 07559-007 07559-006 ADA4627-1/ADA4637-1 120 120 100 110 80 100 60 90 PSRR– PSRR+ 40 80 ADA4627-1 ADA4627-1 20 70 T = 25°C V = ±15V A SY V = ±15V SY V = ±11.5V CM 0 60 100 1k 10k 100k 1M 10M –50 –25 0 25 50 75 100 125 FREQUENCY (Hz) TEMPERATURE (°C) Figure 10. PSRR vs. Frequency Figure 13. CMRR vs. Temperature 8 20 –40ºC ADA4627-1 7 T = 25°C A V = ±15V SY +25ºC +85ºC 10 +125ºC 6 5 4 3 2 ADA4627-1 1 0 1 0 4 8 12 16 20 24 28 32 36 10 0.001 0.01 0.1 1 100 SUPPLY VOLTAGE (V) I (mA) LOAD Figure 11. Supply Current vs. Supply Voltage and Temperature Figure 14. V Sinking vs. I Current OUT LOAD 120 20 ADA4627-1 T = 25°C A V = ±15V SY 10 110 ADA4627-1 R = ∞ L ±4.5V < V < ±18V SY 1 100 0.001 0.01 0.1 1 10 100 –40 –20 0 20 40 60 80 100 120 I (mA) TEMPERATURE (°C) LOAD Figure 15. V Sourcing vs. I Current Figure 12. PSRR vs. Temperature OUT LOAD Rev. D | Page 7 of 20 PSRR (dB) PSRR (dB) SUPPLY CURRENT (mA) 07559-068 07559-011 07559-009 COMMON-MODE REJECTION RATIO (dB) V – V (V) V – V (V) OL SS DD OH 07559-057 07559-058 07559-012 ADA4627-1/ADA4637-1 8 0.01 ADA4627-1 7 T = 25°C A V = ±15V SY V = 810mV IN 6 R = 600Ω L 80kHz FILTER 0.001 5 4 3 0.0001 2 ADA4627-1 T = 25°C 1 A SOIC PACKAGE 0 0.00001 0.01 0.1 1 10 0 4 8 12 16 20 24 28 32 36 FREQUENCY (kHz) SUPPLY VOLTAGE (V) Figure 16. Supply Current vs. Supply Voltage Figure 19. THD + N vs. Frequency 0.1 10,000 ADA4627-1 V = ±15V SY 1,000 0.01 MEASURED 100 0.001 10 ADA4627-1 T = 25°C A 0.0001 V = ±15V EXTRAPOLATED SY V = 1kHz 1 IN R = 600Ω L 0.0647x y = 0.2895 80kHz FILTER 2 R = 0.9991 0.00001 0.1 10 30 50 70 90 110 130 0.001 0.01 0.1 1 TEMPERATURE (°C) AMPLITUDE (V rms) Figure 20. Input Bias Current vs. Temperature Figure 17. THD + N vs. V IN 60 100 ADA4627-1 I + B 50 T = 25°C A 75 V = ±15V SY +85°C I – B 40 50 A = +100 V 30 25 I + B +25ºC 20 0 A = +10 V I – B 10 –25 0 –50 A = +1 V ADA4627-1 –10 –75 V = ±15V SY –20 –100 10 100 1k 10k 100k 1M 10M 100M –15 –10 –5 0 5 10 15 FREQUENCY (kHz) V (V) CM Figure 18. Closed-Loop Gain vs. Frequency Figure 21. Input Bias Current vs. V and Temperature CM Rev. D | Page 8 of 20 THD + N (%) GAIN (dB) SUPPLY CURRENT (mA) 07559-015 07559-070 07559-072 I (pA) THD + N (%) B I (pA) B 07559-073 07559-078 07559-071 ADA4627-1/ADA4637-1 1200 1100 1000 I + B 900 800 700 I – B 1 600 ADA4627-1 500 T = 25°C A A = –1 V 400 V = 20V p-p IN 300 ADA4627-1 R = R = 2kΩ F IN T = 125°C C = 10pF F A 200 V = ±15V R = 1kΩ L SY C = 1nF L 100 0 TIME (1µs/DIV) –15 –10 –5 0 5 10 15 V (V) CM Figure 25. Large Signal Transient Response Figure 22. Input Bias Current vs. V at 125°C CM 80 ADA4627-1 ADA4627-1 T = 25°C A 60 T = 25°C A V = ±15V SY A = +1 V V = 20V p-p IN 40 R = 0Ω F 20 1 0 –20 –40 –60 –80 TIME (200ns/DIV) 0 60 120 180 240 300 TIME (Seconds) Figure 23. Input Offset Voltage vs. Time Figure 26. Large Signal Transient Response 60 ADA4627-1 T = 25°C A A = –1 V 50 OS– V = 20V p-p IN R = R = 2kΩ F IN 40 OS+ 1 30 20 ADA4627-1 T = 25°C A V = ±15V SY 10 A = +1 V V = 100mV p-p IN 0 CH1 5.00V TIME (200ns/DIV) 1 10 100 1000 10,000 LOAD CAPACITANCE (pF) Figure 24. Small Signal Overshoot vs. Load Capacitance Figure 27. Large Signal Transient Response Rev. D | Page 9 of 20 I (pA) V (µV) B OS OVERSHOOT (%) 07559-023 07559-075 07559-074 OUTPUT VOLTAGE (5V/DIV) OUTPUT VOLTAGE (5V/DIV) OUTPUT VOLTAGE (5V/DIV) 07559-062 07559-059 07559-061 ADA4627-1/ADA4637-1 1 1 ADA4627-1 ADA4627-1 T = 25°C T = 25°C A A A = –1 A = +1 V V V = 200mV p-p V = 20V p-p IN IN R = R = 2kΩ R = 0Ω F IN F C = 5pF R = 1kΩ F L C = 1nF L TIME (1µs/DIV) TIME (200ns/DIV) Figure 28. Large Signal Transient Response Figure 31. Small Signal Transient Response ADA4627-1 T = 25°C A A = –1 V V = 20V p-p IN R = R = 2kΩ F IN C = 10pF F R = 1kΩ L C = 100pF L 1 1 ADA4627-1 T = 25°C A A = +1 V V = 200mV p-p IN R = 0Ω F R = 1kΩ L C = 1nF L TIME (200ns/DIV) TIME (200ns/DIV) Figure 29. Large Signal Transient Response Figure 32. Small Signal Transient Response 1 1 ADA4627-1 ADA4627-1 T = 25°C A T = 25°C A A = –1 V A = +1 V V = 200mV p-p IN V = 200mV p-p IN R = R = 2kΩ F IN R = 0Ω F C = 5pF F R = 1kΩ L C = 100pF L TIME (200ns/DIV) TIME (200ns/DIV) Figure 30. Small Signal Transient Response Figure 33. Small Signal Transient Response Rev. D | Page 10 of 20 OUTPUT VOLTAGE (5V/DIV) OUTPUT VOLTAGE (50mV/DIV) OUTPUT VOLTAGE (5V/DIV) 07559-064 07559-060 07559-063 OUTPUT VOLTAGE (50mV/DIV) OUTPUT VOLTAGE (50mV/DIV) OUTPUT VOLTAGE (50mV/DIV) 07559-067 07559-065 07559-066 ADA4627-1/ADA4637-1 20 ADA4627-1 ADA4627-1 T = 25°C T = 25°C 15 A A 1 V = ±15 V = ±15V SY SY 10 5 V OUT 2 0 –5 V IN V OUT –10 –15 V IN –20 TIME (200ns/DIV) 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 TIME (ms) Figure 34. No Phase Reversal Figure 37. Positive Settling Time to 0.01% ADA4627-1 T = 25°C A 1 V = ±15 SY V IN 2 1 V OUT ADA4627-1 T = 25°C A V = ±15V SY DUT GAIN = 100 4TH ORDER BAND PASS FIXTURE GAIN = 10k TOTAL GAIN = 1M TIME (200ns/DIV) TIME (1s/DIV) Figure 35. Negative Settling Time to 0.01% Figure 38. 0.1 Hz to 10 Hz Noise 140 100 120 100 PHASE 80 80 60 GAIN 60 40 20 0 ADA4637-1 40 V = ±15V –20 SY T = 25ºC A –40 A = –4 V R = 500Ω 20 IN –60 R = 2kΩ F ADA4637-1 C = 4.8pF F V = ±15V –80 SY C = 35pF T = 25ºC L A –100 0 10k 100k 1M 10M 100M 10 100 1k 10k 100k 1M 10M 100M FREQUENCY (Hz) FREQUENCY (Hz) Figure 36. Open-Loop Gain and Phase vs. Frequency Figure 39. CMRR vs. Frequency Rev. D | Page 11 of 20 GAIN (dB) AND PHASE (Degrees) INPUT VOLTAGE (5V/DIV) AMPLITUDE (V) OUTPUT VOLTAGE (1mV/DIV) 07559-076 07559-033 07559-082 CMRR (dB) INPUT VOLTAGE (5V/DIV) OUTPUT VOLTAGE (200mV/DIV) OUTPUT VOLTAGE (1mV/DIV) 07559-040 07559-077 07559-083 ADA4627-1/ADA4637-1 120 ADA4637-1 T = 25°C PSRR+ A A = +5 V 100 V = ±15V SY R = 500Ω IN PSRR– R = 2kΩ F C = 4.8pF 80 F C = 50pF L 60 40 ADA4637-1 20 V = ±15V SY A = +5 V T = 25°C A 0 TIME (200ns/DIV) 10 100 1k 10k 100k 1M 10M 100M FREQUENCY (Hz) Figure 43. Small Signal Transient Response Figure 40. PSRR vs. Frequency 50 ADA4637-1 T = 25°C A A = +100 V A = –4 V V = ±15V SY 40 R = 500Ω IN R = 2kΩ F C = 4.8pF F 30 A = +10 V 20 10 A = +5 V ADA4637-1 V = ±15V 0 SY R = 1kΩ, F C = 4.8pF F T = 25ºC A –10 TIME (100ns/DIV) 100 1k 10k 100k 1M 10M 100M FREQUENCY (Hz) Figure 44. Slew Rate Falling Figure 41. Closed-Loop Gain vs. Frequency ADA4637-1 ADA4637-1 T = 25°C T = 25°C A A A = –4 A = +5 V V V = ±15V V = ±15V SY SY R = 500Ω R = 500Ω IN IN R = 2kΩ R = 2kΩ F F C = 4.8pF C = 3pF F F TIME (200ns/DIV) TIME (100ns/DIV) Figure 45. Slew Rate Rising Figure 42. Large Signal Transient Response Rev. D | Page 12 of 20 PSRR (dB) GAIN (dB) OUTPUT VOLTAGE (5V/DIV) 07559-084 07559-079 07559-081 OUTPUT VOLTAGE (5V/DIV) OUTPUT VOLTAGE (5V/DIV) OUTPUT VOLTAGE (100mV/DIV) 07559-087 07559-086 07559-085 ADA4627-1/ADA4637-1 100 ADA4637-1 V = ±15V SY V = 0V CM T = 25°C A 10 1 1 10 100 1k 10k 100k FREQUENCY (Hz) Figure 46. Voltage Noise Density vs. Frequency Rev. D | Page 13 of 20 VOLTAGE NOISE DENSITY (nV/√Hz) 07559-080 ADA4627-1/ADA4637-1 THEORY OF OPERATION The ADA4627-1 is a high speed, unity gain stable amplifier with use the offset adjust pins, especially for offset adjust of a excellent dc characteristics. The ADA4637-1 is a decompensated complete signal chain. Signal chain offset can be addressed with version that is stable at a gain of 5 or greater. The typical offset an auto-zero amplifier used to form a composite amplifier; or, if voltage of 70 µV allows the amplifiers to be easily configured for the ADA4627-1 or the ADA4637-1 is in an inverting amplifier high gains without the risk of excessive output voltage errors. The stage, it can be modified easily to add a potentiometer (see small temperature drift of 2 µV/°C ensures a minimum offset Figure 48). The LFCSP package does not have offset adjust pins. voltage error over the entire temperature range of −40°C to R F +125°C, making the amplifiers ideal for a variety of sensitive measurement applications in harsh operating environments. R IN 2 INPUT VOLTAGE RANGE 6 + ADA4627-1 + V The ADA4627-1/ADA4637-1 are not rail-to-rail input OUT V IN – 3 amplifiers; therefore, care is required to ensure that both inputs +V S – do not exceed the input voltage range. Under normal negative 499kΩ 499kΩ 100kΩ feedback operating conditions, the amplifier corrects its output 0.1µF 200Ω to ensure that the two inputs are at the same voltage. However, –V S if either input exceeds the input voltage range, the loop opens, Figure 48. Alternate Offset Null Circuit for Inverting Stage and large currents begin to flow through the ESD protection diodes in the amplifier. INPUT BIAS CURRENT These diodes are connected between the inputs and each supply Because the ADA4627-1/ADA4637-1 have a JFET input stage, rail to protect the input transistors against an electrostatic discharge the input bias current, due to the reverse-biased junction, has event, and they are normally reverse-biased. However, if the input a leakage current that approximately doubles every 10°C. The voltage exceeds the supply voltage, these ESD diodes can become power dissipation of the part, combined with the thermal resistance forward-biased. Without current limiting, excessive amounts of the package, results in the junction temperature increasing of current can flow through these diodes, causing permanent up 20 degrees to 30 degrees Celsius above ambient. This damage to the device. If inputs are subject to overvoltage, insert parameter is tested with high speed ATE equipment, which does appropriate series resistors to limit the diode current to less not result in the die temperature reaching equilibrium. This is than 5 mA. correlated with bench measurements to match the guaranteed maximum at room temperature shown in Table 2. INPUT OFFSET VOLTAGE ADJUST RANGE The input current can be reduced by keeping the temperature as The ADA4627-1/ADA4637-1 SOIC packages have offset low as possible and using a light load on the output. adjust pins for compatibility with some existing designs. The recommended offset nulling circuit is shown in Figure 47. NOISE CONSIDERATIONS +V S The JFET input stage offers very low input voltage noise and input current noise. The thermal noise of a 1 kΩ resistor at 100kΩ room temperature is 4 nV/√Hz; therefore, low values of 7 resistance should be used for dc-coupled inverting and 1 2 5 noninverting amplifier configurations. In the case of 6 ADA4627-1 transimpedance amplifiers (TIAs), current noise is more 3 important. 4 The ADA4627-1/ADA4637-1 are an excellent choice for both of these applications. Analog Devices offers a wide variety of low –V S voltage noise and low current noise op amps in a variety of Figure 47. Standard Offset Null Circuit processes that are optimized for different supply voltage ranges. With a 100 kΩ potentiometer, the adjustment range is Refer to Application Note AN-940 for a discussion of noise, more than ±11 mV. However, the V temperature drift calculations, and selection tables for more than three dozen low OS increases by several µV/°C for every millivolt of offset adjust. noise, op amp families. The ADA4627-1/ADA4637-1 have matching thin film resistors that are laser trimmed at two temperatures to minimize both offset voltage and offset voltage drift. The offset voltage at room temperature is less than 0.5 mV, and the offset voltage drift is only a few µV/°C or less; therefore, it is not recommended to Rev. D | Page 14 of 20 07559-051 07559-052 ADA4627-1/ADA4637-1 C F THD + N MEASUREMENTS GUARD Total harmonic distortion plus noise (THD + N) is usually R F measured with an audio analyzer, such as those from Audio 2 Precision, Inc™. The analyzer consists of a low distortion 6 + ADA4627-1 V oscillator that is swept from the starting frequency to the OUT I N 8 – 3 ending frequency. The oscillator is connected to the circuit under test, and the output of the circuit goes back to the analyzer. Figure 50. Inverting Amplifier with Guard The analyzer has a tunable notch filter in lock step with the For a noninverting configuration, the trace can be driven from swept oscillator. This removes the fundamental frequency the feedback divider, but the resistors should be chosen to offer but allows all of the harmonics and wideband noise to be a low impedance drive to the trace (see Figure 51). measured with an integrating voltmeter. However, there is a GUARD switchable low-pass filter in series with the notch filter. If the sine wave is at 100 Hz, then the tenth harmonic is still at 1 kHz; 3 therefore, having a low pass at 80 kHz is not a problem. When V OUT 6 + ADA4627-1 the oscillator reaches 20 kHz, the fourth harmonic (80 kHz) + R F V S 8 2 is partially attenuated, resulting in a lower reading from the – voltmeter. When evaluating THD + N curves from any manufacturer, careful attention should be paid to the test conditions. The difference between an 80 kHz low-pass filter R I and a 500 kHz filter is shown in Figure 49. – 0.01 Figure 51. Noninverting Amplifier with Guard ADA4627-1 T = 25°C A The board layout should be compact with traces as short as V = ±15V SY possible. For second-order board considerations, such as V = 810mV IN R = 600Ω L triboelectric effects and piezoelectric effects, as well as a table 0.001 of insulating material properties, see the AD549 data sheet. In some cases, shielding from air currents may be helpful. A general rule of thumb, for op amps with gain bandwidth 500kHz FILTER 0.0001 products higher than 1 MHz, bypass capacitors should be very close to the part, within 3 mm. Each supply should be bypassed 80kHz FILTER with a 0.01 µF ceramic capacitor in parallel with a 1 µF bulk decoupling capacitor. The ceramic capacitors should be closer 0.00001 to the op amp. Sockets, which add inductance and capacitance, 0.01 0.1 1 10 100 FREQUENCY (kHz) should not be used. Figure 49. THD + N vs. Frequency OUTPUT PHASE REVERSAL PRINTED CIRCUIT BOARD LAYOUT, BIAS Output phase reversal occurs in some amplifiers when the input CURRENT, AND BYPASSING common-mode voltage range is exceeded. As common-mode voltage is moved outside the common-mode range, the outputs To take advantage of the very low input bias current of the of these amplifiers can suddenly jump in the opposite direction ADA4627-1/ADA4637-1 at room temperature, leakage paths to the supply rail. This is the result of the differential input pair must be considered. A printed circuit board (PCB), with dust shutting down, causing a radical shifting of internal voltages and humidity, can have 100 MΩ of resistance over a few tenths that results in the erratic output behavior. of an inch. A 1 mV differential between the two points results in 10 pA of leakage current, more than the guaranteed maximum. The ADA4627-1/ADA4637-1 amplifiers have been carefully designed to prevent any output phase reversal if both inputs are The op amp inputs should be guarded by surrounding the nets maintained within the specified input voltage range. If one or with a metal trace maintained at the predicted voltage. In the both inputs exceed the input voltage range but remain within case of an inverting configuration or transimpedance amplifier, the supply rails, an internal loop opens and the output varies. (see Figure 50), the inverting and noninverting nodes can be Therefore, the inputs should always be a minimum of 3 V away surrounded by traces held at a quiet analog ground. from either supply rail. Rev. D | Page 15 of 20 THD + N (%) 07559-017 07559-054 07559-053 ADA4627-1/ADA4637-1 or oscillation. The ADA4627-1/ADA4637-1 have a high phase DECOMPENSATED OP AMPS margin and low output impedance, so they can drive reasonable The ADA4637-1 is a decompensated op amp, and, as such, must values of capacitance. This is a common situation when an always be operated at a noise gain of 5 or greater. See tutorial amplifier is used to drive the input of switched capacitor ADCs. MT-033, “Voltage Feedback Op Amp Gain and Bandwidth”, at For other considerations and various circuit solutions, see the www.analog.com for more information. Analog Dialogue article titled Ask the Applications Engineer-25, DRIVING CAPACITIVE LOADS Op Amps Driving Capacitive Loads, available at www.analog.com. Adding capacitance to the output of any op amp results in addi- tional phase shift, which reduces stability and leads to overshoot Rev. D | Page 16 of 20 ADA4627-1/ADA4637-1 OUTLINE DIMENSIONS 3.25 0.60 MAX 3.00 SQ 0.50 2.75 BSC 0.60 MAX 5 8 2.95 1.60 EXPOSED 2.75 SQ TOP 1.45 PIN 1 PAD VIEW 2.55 INDICATOR (BOTTOM VIEW) 1.30 4 1 PIN 1 0.50 INDICATOR 1.89 0.40 1.74 12° MAX 0.70 MAX 0.30 1.59 0.90 MAX 0.65TYP 0.85 NOM 0.05 MAX FOR PROPER CONNECTION OF 0.01 NOM THE EXPOSED PAD, REFER TO THE PIN CONFIGURATION 0.30 SEATING SECTION OF THIS DATA SHEET. PLANE 0.23 0.20 REF 0.18 Figure 52. 8-Lead Lead Frame Chip Scale Package [LFCSP_VD] 3 mm × 3 mm Body, Very Thin, Dual Lead (CP-8-2) Dimensions shown in millimeters 5.00 (0.1968) 4.80 (0.1890) 8 5 4.00 (0.1574) 6.20 (0.2441) 1 3.80 (0.1497) 5.80 (0.2284) 4 1.27 (0.0500) 0.50 (0.0196) 45° BSC 1.75 (0.0688) 0.25 (0.0099) 1.35 (0.0532) 0.25 (0.0098) 8° 0.10 (0.0040) 0° 0.51 (0.0201) COPLANARITY 1.27 (0.0500) 0.10 0.31 (0.0122) 0.25 (0.0098) SEATING 0.40 (0.0157) PLANE 0.17 (0.0067) COMPLIANT TO JEDEC STANDARDS MS-012-AA CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN. Figure 53. 8-Lead Standard Small Outline Package [SOIC_N] Narrow Body (R-8) Dimensions shown in millimeters and (inches) Rev. D | Page 17 of 20 012407-A 090308-B ADA4627-1/ADA4637-1 ORDERING GUIDE 1 Model Temperature Range Package Description Package Option Branding ADA4627-1ACPZ-R2 −40°C to +125°C 8-Lead LFCSP_VD CP-8-2 A29 ADA4627-1ACPZ-RL −40°C to +125°C 8-Lead LFCSP_VD CP-8-2 A29 ADA4627-1ACPZ-R7 −40°C to +125°C 8-Lead LFCSP_VD CP-8-2 A29 ADA4627-1ARZ −40°C to +125°C 8-Lead SOIC_N R-8 ADA4627-1ARZ-RL −40°C to +125°C 8-Lead SOIC_N R-8 ADA4627-1ARZ-R7 −40°C to +125°C 8-Lead SOIC_N R-8 ADA4627-1BRZ −40°C to +125°C 8-Lead SOIC_N R-8 ADA4627-1BRZ-R7 −40°C to +125°C 8-Lead SOIC_N R-8 ADA4627-1BRZ-RL −40°C to +125°C 8-Lead SOIC_N R-8 ADA4637-1ACPZ-R2 −40°C to +125°C 8-Lead LFCSP_VD CP-8-2 A2S ADA4637-1ACPZ-RL −40°C to +125°C 8-Lead LFCSP_VD CP-8-2 A2S ADA4637-1ACPZ-R7 −40°C to +125°C 8-Lead LFCSP_VD CP-8-2 A2S ADA4637-1ARZ −40°C to +125°C 8-Lead SOIC_N R-8 ADA4637-1ARZ-RL −40°C to +125°C 8-Lead SOIC_N R-8 ADA4637-1ARZ-R7 −40°C to +125°C 8-Lead SOIC_N R-8 ADA4637-1BRZ −40°C to +125°C 8-Lead SOIC_N R-8 ADA4637-1BRZ-R7 −40°C to +125°C 8-Lead SOIC_N R-8 ADA4637-1BRZ-RL −40°C to +125°C 8-Lead SOIC_N R-8 1 Z = RoHS Compliant Part. Rev. D | Page 18 of 20 ADA4627-1/ADA4637-1 NOTES Rev. D | Page 19 of 20 ADA4627-1/ADA4637-1 NOTES ©2009-2010 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D07559-0-10/10(D) Rev. D | Page 20 of 20

Frequently asked questions

What makes Elite.Parts unique?

chervon down
At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

What kind of warranty will the ADA4627-1 have?

chervon down
Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Which carriers does Elite.Parts work with?

chervon down
Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Will Elite.Parts sell to me even though I live outside the USA?

chervon down
Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

I have a preferred payment method. Will Elite.Parts accept it?

chervon down
All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

Why buy from GID?

quality

Quality

We are industry veterans who take pride in our work

protection

Protection

Avoid the dangers of risky trading in the gray market

access

Access

Our network of suppliers is ready and at your disposal

savings

Savings

Maintain legacy systems to prevent costly downtime

speed

Speed

Time is of the essence, and we are respectful of yours

What they say about us

FANTASTIC RESOURCE

star star star star star

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

star star star star star

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

star star star star star

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

star star star star star

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

star star star star star

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

star star star star star

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Related Products

ANALOG DEVICE# A5E1032

SOCKET FOR MODEL AD210 IC

TRANSFORMER CURRENT 60.0 AMP

SOCKET FOR MODEL 1B22 IC

product

Analog Devices AD7291 12-Bit Low power 8-Channel Successive Approximation Analog-to-Digital Converte...