Elite.Parts Manufacturers A ANALOG DEVICES ADA4000-1
About product Specifications Features Datasheet FAQ

ANALOG DEVICES ADA4000-1

Description

Analog Devices ADA4000-1 Single, Low Cost, Precision JEFT Input Operational Amplifier

Part Number

ADA4000-1

Price

Request Quote

Manufacturer

ANALOG DEVICES

Lead Time

Request Quote

Category

PRODUCTS - A

Specifications

# OpAmps per Pkg

1

-3dB Bandwidth>

5MHz

Ib

5pA

Input Noise (nV/rtHz)

16nV/rtHz

Isy per Amplifier

1.65mA

Packages

SOIC,SOT

Slew Rate

20V/µs

Vcc-Vee

8V to 36V

Vos

200µV

Features

Datasheet

pdf file

ADA4000-1-1706232423.pdf

413 KiB

Extracted Text

Low Cost, Precision JFET Input Operational Amplifiers ADA4000-1/ADA4000-2/ADA4000-4 FEATURES PIN CONFIGURATIONS High slew rate: 20 V/μs OUT 1 5 V+ Fast settling time ADA4000-1 TOP VIEW V– 2 Low offset voltage: 1.70 mV maximum (Not to Scale) Bias current: 40 pA maximum +IN 3 4 –IN ±4 V to ±18 V operation Figure 1. 5-Lead TSOT (UJ-5) Low voltage noise: 16 nV/√Hz Unity gain stable NC 1 8 NC Common-mode voltage includes +V S –IN 2 7 V+ ADA4000-1 Wide bandwidth: 5 MHz +IN 3 TOP VIEW 6 OUT (Not to Scale) V– 4 5 NC NC = NO CONNECT APPLICATIONS Figure 2. 8-Lead SOIC (R-8) Reference gain/buffers Level shift/driving OUT A 1 8 +V Active filters 2 7 –IN A ADA4000-2 OUT B Power line monitoring/control TOP VIEW +IN A 3 6 –IN B (Not to Scale) Current/voltage sense or monitoring –V 4 5 +IN B Data acquisition Figure 3. 8-Lead SOIC (R-8) Sample-and-hold circuits Integrators OUT A 1 8 +V –IN A 2 7 OUT B ADA4000-2 TOP VIEW +IN A 3 6 –IN B (Not to Scale) GENERAL DESCRIPTION –V 4 5 +IN B The ADA4000-1/ADA4000-2/ADA4000-4 are JFET input Figure 4. 8-Lead MSOP (RM-8) operational amplifiers featuring precision, very low bias current, OUT A 1 14 OUT D and low power. Combining high input impedance, low input –IN A 2 13 –IN D bias current, wide bandwidth, fast slew rate, and fast settling +IN A 3 12 +IN D ADA4000-4 time, the ADA4000-1/ADA4000-2/ADA4000-4 are ideal +V 4 11 –V TOP VIEW amplifiers for driving analog-to-digital inputs and buffering (Not to Scale) +IN B 5 10 +IN C digital-to-analog converter outputs. The input common-mode –IN B 6 9 –IN C OUT B 7 8 OUT C voltage includes the positive power supply, which makes the part an excellent choice for high-side signal conditioning. Figure 5. 14-Lead SOIC (R-14) Additional applications for the ADA4000-1/ADA4000-2/ 1 OUT A 14 OUT D ADA4000-4 include electronic instruments, ATE amplification, 2 –IN A 13 –IN D buffering, integrator circuits, instrumentation-quality photodiode 3 12 +IN A +IN D ADA4000-4 amplification, and fast precision filters (including PLL filters). TOP VIEW 4 11 +V –V (Not to Scale) The parts also include utility functions, such as reference 5 10 +IN B +IN C buffering, level shifting, control I/O interface, power supply 6 9 –IN B –IN C control, and monitoring functions. 7 8 OUT B OUT C Figure 6. 14-Lead TSSOP (RU-14) Rev. A Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. rights of third parties that may result from its use. Specifications subject to change without notice. No Tel: 781.329.4700 www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Fax: 781.461.3113 ©2007—2009 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. 05791-001 05791-002 05791-028 05791-027 05791-029 05791-030 ADA4000-1/ADA4000-2/ADA4000-4 TABLE OF CONTENTS Features .............................................................................................. 1 Power Sequencing .........................................................................5 Applications ....................................................................................... 1 ESD Caution...................................................................................5 General Description ......................................................................... 1 Typical Performance Characteristics ..............................................6 Pin Configurations ........................................................................... 1 A pplica t ions ..................................................................................... 10 Revision History ............................................................................... 2 Output Phase Reversal and Input Noise ................................. 10 Specif ica t ions ..................................................................................... 3 Capacitive Load Drive ............................................................... 10 Electrical Characteristics ............................................................. 3 Settling Time ............................................................................... 11 Absolute Maximum Ratings ............................................................ 5 Outline Dimensions ....................................................................... 12 Thermal Resistance ...................................................................... 5 Ordering Guide .......................................................................... 14 REVISION HISTORY 3/09—Rev. 0 to Rev. A Changes to Input Voltage Range Parameter ................................. 4 Changes to Common-Mode Rejection Ration Parameter .......... 4 Updated Outline Dimensions ....................................................... 12 Changes to Ordering Guide .......................................................... 14 5/07—Revision 0: Initial Version Rev. A | Page 2 of 16 ADA4000-1/ADA4000-2/ADA4000-4 SPECIFICATIONS ELECTRICAL CHARACTERISTICS V = ±15.0 V, V = V /2 V, T = 25°C, unless otherwise specified. S CM S A Table 1. Parameter Symbol Conditions Min Typ Max Unit INPUT CHARACTERISTICS Offset Voltage VOS 0.2 1.70 mV −40°C ≤ T ≤ +125°C 3.0 mV A Input Bias Current I 5 40 pA B −40°C ≤ TA ≤ +85°C 170 pA −40°C ≤ TA ≤ +125°C 4.5 nA Input Offset Current IOS 2 40 pA −40°C ≤ T ≤ +85°C 80 pA A −40°C ≤ T ≤ +125°C 500 pA A Input Voltage Range IVR −11 +15 V Common-Mode Rejection Ratio CMRR −11 V ≤ VCM ≤ +15 V 80 100 dB −40°C ≤ TA ≤ +125°C 100 dB Open-Loop Gain AVO RL = 2 kΩ, VO = ±10 V 100 110 dB Offset Voltage Drift ΔV/ΔT −40°C ≤ T ≤ +125°C 2 μV/°C OS A OUTPUT CHARACTERISTICS Output Voltage High V R = 2 kΩ to ground 13.60 13.90 V OH L −40°C ≤ T ≤ +125°C 13.40 V A Output Voltage Low V R = 2 kΩ to ground −13.4 −13.0 V OL L −40°C ≤ TA ≤ +125°C −12.80 V Short-Circuit Current ISC ±28 mA POWER SUPPLY Power Supply Rejection Ratio PSRR VS = ±4.0 V to ±18.0 V 82 92 dB Supply Current/Amplifier ISY 1.35 1.65 mA −40°C ≤ TA ≤ +125°C 1.80 mA DYNAMIC PERFORMANCE Slew Rate SR VI = 10 V, RL = 2 kΩ 20 V/μs Gain Bandwidth Product GBP 5 MHz Phase Margin Φ 60 Degrees M NOISE PERFORMANCE Voltage Noise e 0.1 Hz to 10 Hz 1 μV p-p n p-p Voltage Noise Density e f = 1 kHz 16 nV/√Hz n Current Noise Density i f = 1 kHz 0.01 pA/√Hz n INPUT IMPEDANCE Differential Mode (R||C) 10||4 GΩ||pF IN-DIFF 3 Common Mode (R||C) 10||5.5 GΩ||pF INCM Rev. A | Page 3 of 16 ADA4000-1/ADA4000-2/ADA4000-4 V = ±5 V, V = V /2 V, T = 25°C, unless otherwise specified. S CM S A Table 2. Parameter Symbol Conditions Min Typ Max Unit INPUT CHARACTERISTICS Offset Voltage V 0.20 1.70 mV OS −40°C ≤ T ≤ +125°C 3.0 mV A Input Bias Current I 5 40 pA B −40°C ≤ TA ≤ +85°C 170 pA −40°C ≤ TA ≤ +125°C 3 nA Input Offset Current IOS 2 40 pA −40°C ≤ T ≤ +85°C 80 pA A −40°C ≤ T ≤ +125°C 500 pA A Input Voltage Range IVR −1.0 +5.0 V Common-Mode Rejection Ratio CMRR −1.0 V ≤ VCM ≤ +5.0 V 72 80 dB −40°C ≤ TA ≤ +125°C 80 dB Open-Loop Gain AVO RL = 2 kΩ, VO = ±2.5 V 106 114 dB Offset Voltage Drift ΔV/ΔT −40°C ≤ T ≤ +125°C 2 μV/°C OS A OUTPUT CHARACTERISTICS Output Voltage High V R = 2 kΩ to ground 4.0 4.20 V OH L −40°C ≤ T ≤ +125°C 3.80 V A Output Voltage Low V R = 2 kΩ to ground −3.45 −3.20 V OL L −40°C ≤ TA ≤ +125°C −3.00 V Short-Circuit Current ISC ±28 mA POWER SUPPLY Supply Current/Amplifier ISY 1.25 1.65 mA −40°C ≤ TA ≤ +125°C 1.80 mA DYNAMIC PERFORMANCE Slew Rate SR VI = 10 V, RL = 2 kΩ 20 V/μs Gain Bandwidth Product GBP 5 MHz Phase Margin ΦM 55 Degrees NOISE PERFORMANCE Voltage Noise en p-p 0.1 Hz to 10 Hz 1 μV p-p Voltage Noise Density e f = 1 kHz 16 n nV/√Hz Current Noise Density i f = 1 kHz 0.01 n pA/√Hz INPUT IMPEDANCE Differential Mode (R||C) 10||4 GΩ||pF IN-DIFF 3 Common Mode (R||C) 10||5.5 GΩ||pF INCM Rev. A | Page 4 of 16 ADA4000-1/ADA4000-2/ADA4000-4 ABSOLUTE MAXIMUM RATINGS THERMAL RESISTANCE Table 3. θ is specified for the worst-case conditions, that is, a device JA Parameter Rating soldered in a circuit board for surface-mount packages. Supply Voltage ±18 V Input Voltage ±V supply Table 4. Thermal Resistance Differential Input Voltage ±V supply Package Type θ θ Unit JA JC Output Short-Circuit Duration to GND Indefinite 5-Lead TSOT (UJ-5) 172.92 61.76 °C/W Storage Temperature Range −65°C to +150°C 8-Lead SOIC (R-8) 112.38 61.6 °C/W Operating Temperature Range −40°C to +125°C 8-Lead MSOP (RM-8) 141.9 43.7 °C/W Junction Temperature Range −65°C to +150°C 14-Lead SOIC (R-14) 88.2 56.3 °C/W Lead Temperature (Soldering, 10 sec) 300°C 14-Lead TSSOP (RU-14) 114 23.3 °C/W Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress POWER SEQUENCING rating only; functional operation of the device at these or any The op amp supply voltages must be established simultaneously other conditions above those indicated in the operational with, or before, any input signals are applied. If this is not section of this specification is not implied. Exposure to absolute possible, the input current must be limited to 10 mA. maximum rating conditions for extended periods may affect device reliability. ESD CAUTION Rev. A | Page 5 of 16 ADA4000-1/ADA4000-2/ADA4000-4 TYPICAL PERFORMANCE CHARACTERISTICS 50 50 V = ±15V V = ±5V S S 45 45 T = 25°C T = 25°C A A V = 0V V = 0V CM CM 40 40 35 35 30 30 25 25 20 20 15 15 10 10 5 5 0 0 –2.0 –1.5 –1.0 –0.5 0 0.5 1.0 1.5 2.0 –2.0 –1.5 –1.0 –0.5 0 0.5 1.0 1.5 2.0 OFFSET VOLTAGE (mV) OFFSET VOLTAGE (mV) Figure 10. Input Offset Voltage Distribution, VS = ±5 V Figure 7. Input Offset Voltage Distribution, VS = ±15 V 18 14 V = ±15V V = ±5V S S 16 12 14 10 12 8 10 8 6 6 4 4 2 2 0 0 02 4 68 10 12 14 16 18 20 02 4 6 8 10 12 14 16 18 20 TCV (µV/°C) TCV (µV/°C) OS OS Figure 8. Offset Voltage Drift Distribution, V = ±15 V Figure 11. Offset Voltage Drift Distribution, V = ±5 V S S 80 180 80 180 V = ±15V S V = ±5V S T = 25°C A T = 25°C A C = 35pF L C = 35pF L 60 135 60 135 40 90 40 90 20 45 20 45 60° 55° 0 0 0 0 –20 –45 –20 –45 1k 10k 100k 1M 10M 100M 1k 100M 10k 100k 1M 10M FREQUENCY (Hz) FREQUENCY (Hz) Figure 9. Open-Loop Gain and Phase Margin vs. Frequency, VS = ±15 V Figure 12. Open-Loop Gain and Phase Margin vs. Temperature, VS = ±5 V Rev. A | Page 6 of 16 GAIN (dB) NUMBER OF AMPLIFIERS NUMBER OF AMPLIFIERS 05791-004 05791-003 PHASE MARGIN (Degrees) 05791-010 GAIN (dB) NUMBER OF AMPLIFIERS NUMBER OF AMPLIFIERS 05791-019 05791-018 PHASE MARGIN (Degrees) 05791-020 ADA4000-1/ADA4000-2/ADA4000-4 120 100 V = ±15V V = ±5V S S T = 25°C A T = 25°C A 100 80 80 60 60 40 40 20 20 100 1k 10k 100k 1M 10M 1k 10k 100k 1M 10M FREQUENCY (Hz) FREQUENCY (Hz) Figure 13. Common-Mode Rejection Ratio vs. Frequency, V = ±15 V Figure 16. Common-Mode Rejection Ratio vs. Frequency, V = ±5 V S S 15 4 V = ±15V S A = +1 V 3 R = 2kΩ L 10 T = 25°C A 2 V = ±5V S 5 A = –1 V 1 R = 2kΩ L T = 25°C A 0 0 –1 –5 –2 –10 –3 –15 –4 TIME (1µs/DIV) TIME (1µs/DIV) Figure 14. Large Signal Transient Response, V = ±15 V Figure 17. Large Signal Transient Response, VS = ±5 V S V = ±15V V = ±5V S S C = 300pF C = 300pF L L A = +1 A = +1 V V T = 25°C T = 25°C A A TIME (2µs/DIV) TIME (2µs/DIV) Figure 18. Small Signal Transient Response, V = ±5 V Figure 15. Small Signal Transient Response, VS = ±15 V S Rev. A | Page 7 of 16 CMRR (dB) VOLTAGE (V) VOLTAGE (20mV/DIV) 05791-016 05791-015 05791-013 CMRR (dB) VOLTAGE (V) VOLTAGE (20mV/DIV) 05791-024 05791-023 05791-021 ADA4000-1/ADA4000-2/ADA4000-4 1.40 3.5 T = 25°C A T = 25°C A NO LOAD 1.35 3.0 1.30 2.5 1.25 2.0 1.20 1.5 1.15 1.10 1.0 ±4 ±5 ±6 ±7 ±8 ±9 ±10 ±11 ±12 ±13 ±14 ±15 ±5 ±6 ±7 ±8 ±9 ±10 ±11 ±12 ±13 ±14 ±15 SUPPLY VOLTAGE (V) SUPPLY VOLTAGE (V) Figure 19. Input Bias Current vs. Supply Voltage Figure 22. Supply Current vs. Supply Voltage 10000 16 V = ±15V S |V | OL 14 1000 12 V OH 10 100 8 10 6 V = ±15V S |V | V = ±5V 4 OL S 1 V = ±5V S V OH 2 0 0.1 –40 –25 –10 5 20 35 50 65 80 95 110 125 02 2.5 5.0 7.5 10.0 12.5 15.0 17.5 20.0 22.55.0 TEMPERATURE (°C) LOAD CURRENT (mA) Figure 23. Output Voltage vs. Load Current Figure 20. Input Bias Current vs. Temperature 1.44 120 V = ±5V, ±15V S 100 1.40 80 V = ±15V S PSRR– 1.36 60 PSRR+ 1.32 40 1.28 20 V = ±5V S 1.24 0 1.20 –20 100 1k 10k 100k 1M 10M –40 –25 –10 5 20 35 50 65 80 95 110 125 TEMPERATURE (°C) FREQUENCY (Hz) Figure 21. Supply Current vs. Temperature Figure 24. PSRR vs. Frequency Rev. A | Page 8 of 16 SUPPLY CURRENT (mA) INPUT BIAS CURRENT (pA) INPUT BIAS CURRENT (pA) 05791-006 05791-012 05791-005 PSRR (dB) OUTPUT VOLTAGE (V) SUPPLY CURRENT (mA) 05791-008 05791-009 05791-014 ADA4000-1/ADA4000-2/ADA4000-4 100 0.6 V = ±5V, ±15V S V = ±5V, ±15V S T = 25°C A 0.4 0.2 10 0 –0.2 –0.4 1 –0.6 1 10 100 1k 10k –5 –4 –3 –2 –1 01234 5 FREQUENCY (Hz) TIME (Seconds) Figure 25. Voltage Noise Density vs. Frequency Figure 28. 0.1 Hz to 10 Hz Input Voltage Noise 120 50 V = ±15V S V = ±5V, ±15V S A = +100 T = 25°C V A 40 100 30 A = +10 80 V 20 60 10 A = +1 V 0 40 A = +100 v –10 20 –20 A = +10 A = +1 v v 0 –30 1k 10k 100k 1M 10M 100M 100 1k 10k 100k 1M 10M 100M FREQUENCY (Hz) FREQUENCY (Hz) Figure 26. Output Impedance vs. Frequency Figure 29. Closed-Loop Gain vs. Frequency 60 V = 100mV p-p IN V = ±5V, ±15V S 50 R = 0 L A = +1 V 40 +OVERSHOOT 30 –OVERSHOOT 20 10 0 06 200 40000 800 1000 LOAD CAPACITANCE (pF) Figure 27. Overshoot vs. Load Capacitance Rev. A | Page 9 of 16 Z (Ω) OVERSHOOT (%) OUT VOLTAGE NOISE DENSITY (nV/√Hz) 05791-022 05791-017 05791-026 CLOSED-LOOP GAIN (dB) V p-p (µV) 05791-025 05791-011 ADA4000-1/ADA4000-2/ADA4000-4 APPLICATIONS OUTPUT PHASE REVERSAL AND INPUT NOISE The advantage of this compensation method is that the swing at the output is not reduced because RS is out of the feedback Phase reversal is a change of polarity in the transfer function of network, and the gain accuracy does not change. Depending on the amplifier. This can occur when the voltage applied at the the capacitive loading of the circuit, the values of RS and CS input of the amplifier exceeds the maximum common-mode change, and the optimum value can be determined empirically. voltage. Phase reversal happens when the part is configured in In Figure 31, the oscilloscope image shows the output of the the gain of 1. ADA4000-x family in response to a 400 mV pulse. The circuit is Most JFET amplifiers invert the phase of the input signal if the configured in the unity gain configuration with 500 pF in input exceeds the common-mode input. Phase reversal is a parallel with 10 kΩ of load capacitive. temporary behavior of the ADA4000-x family. Each part returns to normal operation by bringing back the common- mode voltage. The cause of this effect is saturation of the input INPUT SIGNAL stage, which leads to the forward-biasing of a drain-gate diode. In noninverting applications, a simple fix for this is to insert a series resistor between the input signal and the noninverting terminal of the amplifier. The value of the resistor depends on the application, because adding a resistor adds to the total input noise of the amplifier. The total noise density of the circuit is OUTPUT SIGNAL 2 2 () e = e + i R + 4kTR nTOTAL n n S S where: TIME (1µs/DIV) e is the input voltage noise density of the part. n Figure 31. Capacitive Load Drive Without Snubber Network in is the input current noise density of the part. RS is the source resistance at the noninverting terminal. When the snubber circuit is used, the overshoot is reduced from −23 k is Boltzmann’s constant (1.38 × 10 J/K). 30% to 6% with the same load capacitance. Ringing is virtually T is the ambient temperature in Kelvin (T = 273 + °C). eliminated, as shown in Figure 32. In this circuit, R is 41 Ω and S CS is 10 nF. In general, it is good practice to limit the input current to less than 5 mA to avoid driving a great deal of current into the amplifier inputs. INPUT SIGNAL CAPACITIVE LOAD DRIVE The ADA4000-1/ADA4000-2/ADA4000-4 are stable at all gains in both inverting and noninverting configurations. The parts are capable of driving up to 1000 pF of capacitive loads without oscillations in unity gain configurations. OUTPUT SIGNAL However, as with most amplifiers, driving larger capacitive loads in a unity gain configuration can cause excessive overshoot and ringing. A simple solution to this problem is to use a snubber network (see Figure 30). TIME (1µs/DIV) +15V Figure 32. Capacitive Load with Snubber Network 3 SNUBBER NETWORK U1 V+ V1 1 400mV p-p ADA4000-1 2 V– R S C R L 0 L 500pF 10kΩ C S –15V 0 Figure 30. Snubber Network Configuration Rev. A | Page 10 of 16 05791-031 VOLTAGE (200mV/DIV) VOLTAGE (200mV/DIV) 05791-033 05791-032 ADA4000-1/ADA4000-2/ADA4000-4 The input signal is a 10 V pulse and the output is the error SETTLING TIME signal for the settling time shown in Figure 33. Settling time is the amount of time it takes the amplifier output to reach and remain within a percentage of its final value. This is an important parameter in data acquisition systems. Because most bipolar DAC converters have current output, an external 5V/DIV op amp is required to convert the current to voltage. Therefore, the amplifier settling time plays a role in the total settling time of the output signal. A good approximation for the total settling time is 200mV/DIV 2 2 t Total=() t DAC +(t AMP) S S S The ADA4000-1/ADA4000-2/ADA4000-4 settle to within 0.1% of their final value in less than 1.2 μs. The settling time has been tested by using the configuration circuit in Figure 34. 200ns/DIV Figure 33. Settling Time Measurement Using the False Summing Node Method +15V +15V 3 V+ 8 10kΩ 1 0 V+ ADA4000-1 V AD828 OUT 10kΩ 2 V– V1 V– 4 10V p-p –15V –15V 10kΩ 10kΩ 20kΩ 1kΩ Figure 34. Settling Time Test Circuit Rev. A | Page 11 of 16 05791-034 05791-035 ADA4000-1/ADA4000-2/ADA4000-4 OUTLINE DIMENSIONS 5.00 (0.1968) 4.80 (0.1890) 85 6.20 (0.2441) 4.00 (0.1574) 1 5.80 (0.2284) 3.80 (0.1497) 4 0.50 (0.0196) 1.27 (0.0500) 45° BSC 1.75 (0.0688) 0.25 (0.0099) 1.35 (0.0532) 0.25 (0.0098) 8° 0.10 (0.0040) 0° 0.51 (0.0201) COPLANARITY 1.27 (0.0500) 0.10 0.31 (0.0122) 0.25 (0.0098) SEATING 0.40 (0.0157) PLANE 0.17 (0.0067) COMPLIANT TO JEDEC STANDARDS MS-012-AA CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN. Figure 35. 8-Lead Standard Small Outline Package [SOIC_N] Narrow Body (R-8) Dimensions shown in millimeters and (inches) 2.90 BSC 54 2.80 BSC 1.60 BSC 12 3 0.95 BSC 1.90 * 0.90 MAX BSC 0.70 MIN * 1.00 MAX 0.20 0.08 8° 0.10 MAX 0.50 4° 0.60 SEATING PLANE 0.30 0° 0.45 0.30 * COMPLIANT TO JEDEC STANDARDS MO-193-AB WITH THE EXCEPTION OF PACKAGE HEIGHT AND THICKNESS. Figure 36. 5-Lead Thin Small Outline Transistor Package [TSOT] (UJ-5) Dimensions shown in millimeters Rev. A | Page 12 of 16 012407-A 100708-A ADA4000-1/ADA4000-2/ADA4000-4 3.20 3.00 2.80 8 5 5.15 3.20 4.90 3.00 4.65 2.80 1 4 PIN 1 0.65 BSC 0.95 0.85 1.10 MAX 0.75 0.80 8° 0.15 0.38 0.60 0.23 0° 0.00 0.22 0.40 0.08 COPLANARITY SEATING 0.10 PLANE COMPLIANT TO JEDEC STANDARDS MO-187-AA Figure 37. 8-Lead Mini Small Outline Package [MSOP] (RM-8) Dimensions shown in millimeters 5.10 5.00 4.90 14 8 4.50 6.40 4.40 BSC 4.30 1 7 PIN 1 0.65 BSC 1.05 1.20 1.00 MAX 0.20 0.80 0.09 0.75 0.15 8° 0.60 SEATING 0° 0.05 0.45 0.30 PLANE COPLANARITY 0.19 0.10 COMPLIANT TO JEDEC STANDARDS MO-153-AB-1 Figure 38. 14-Lead Standard Small Outline Package [TSSOP] (RU-14) Dimensions shown in millimeters Rev. A | Page 13 of 16 061908-A ADA4000-1/ADA4000-2/ADA4000-4 8.75 (0.3445) 8.55 (0.3366) 8 14 6.20 (0.2441) 4.00 (0.1575) 1 5.80 (0.2283) 3.80 (0.1496) 7 1.27 (0.0500) 0.50 (0.0197) 45° BSC 0.25 (0.0098) 1.75 (0.0689) 0.25 (0.0098) 1.35 (0.0531) 8° 0.10 (0.0039) 0° COPLANARITY SEATING 1.27 (0.0500) 0.51 (0.0201) 0.10 PLANE 0.25 (0.0098) 0.40 (0.0157) 0.31 (0.0122) 0.17 (0.0067) COMPLIANT TO JEDEC STANDARDS MS-012-AB CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN. Figure 39. 14-Lead Standard Small Outline Package [SOIC_N] (R-14) Dimensions shown in millimeters ORDERING GUIDE Model Temperature Range Package Description Package Option Branding 1 ADA4000-1ARZ −40°C to +125°C 8-Lead SOIC_N R-8 1 ADA4000-1ARZ-R7 −40°C to +125°C 8-Lead SOIC_N R-8 1 ADA4000-1ARZ-RL −40°C to +125°C 8-Lead SOIC_N R-8 1 ADA4000-1AUJZ-R2 −40°C to +125°C 5-Lead TSOT UJ-5 A14 1 ADA4000-1AUJZ-R7 −40°C to +125°C 5-Lead TSOT UJ-5 A14 1 ADA4000-1AUJZ-RL −40°C to +125°C 5-Lead TSOT UJ-5 A14 1 ADA4000-2ARZ −40°C to +125°C 8-Lead SOIC_N R-8 1 ADA4000-2ARZ-R7 −40°C to +125°C 8-Lead SOIC_N R-8 1 ADA4000-2ARZ-RL −40°C to +125°C 8-Lead SOIC_N R-8 1 ADA4000-2ARMZ −40°C to +125°C 8-Lead MSOP RM-8 A1H 1 ADA4000-2ARMZ-RL −40°C to +125°C 8-Lead MSOP RM-8 A1H 1 ADA4000-4ARZ −40°C to +125°C 14-Lead SOIC_N R-14 1 ADA4000-4ARZ-R7 −40°C to +125°C 14-Lead SOIC_N R-14 1 ADA4000-4ARZ-RL −40°C to +125°C 14-Lead SOIC_N R-14 1 ADA4000-4ARUZ −40°C to +125°C 14-Lead TSSOP RU-14 1 ADA4000-4ARUZ-RL −40°C to +125°C 14-Lead TSSOP RU-14 1 Z = RoHS Compliant Part. Rev. A | Page 14 of 16 060606-A ADA4000-1/ADA4000-2/ADA4000-4 NOTES Rev. A | Page 15 of 16 ADA4000-1/ADA4000-2/ADA4000-4 NOTES ©2007—2009 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D05791-0-3/09(A) Rev. A | Page 16 of 16

Frequently asked questions

What makes Elite.Parts unique?

chervon down
At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

What kind of warranty will the ADA4000-1 have?

chervon down
Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Which carriers does Elite.Parts work with?

chervon down
Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Will Elite.Parts sell to me even though I live outside the USA?

chervon down
Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

I have a preferred payment method. Will Elite.Parts accept it?

chervon down
All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

Why buy from GID?

quality

Quality

We are industry veterans who take pride in our work

protection

Protection

Avoid the dangers of risky trading in the gray market

access

Access

Our network of suppliers is ready and at your disposal

savings

Savings

Maintain legacy systems to prevent costly downtime

speed

Speed

Time is of the essence, and we are respectful of yours

What they say about us

FANTASTIC RESOURCE

star star star star star

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

star star star star star

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

star star star star star

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

star star star star star

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

star star star star star

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

star star star star star

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Related Products

ANALOG DEVICE# A5E1032

SOCKET FOR MODEL AD210 IC

TRANSFORMER CURRENT 60.0 AMP

SOCKET FOR MODEL 1B22 IC

product

Analog Devices AD7291 12-Bit Low power 8-Channel Successive Approximation Analog-to-Digital Converte...