ANALOG DEVICES AD9445
Description
Analog Devices AD9445 14-Bit Monolithic Sampling Analog-to-Digital Converter
Part Number
AD9445
Price
Request Quote
Manufacturer
ANALOG DEVICES
Lead Time
Request Quote
Category
PRODUCTS - A
Specifications
# Chan
1
ADC Architecture
Pipelined
Ain Range
(2Vref) p-p,2 V p-p,3.2 V p-p
Analog Input Type
Diff-Uni
Interface
Par
Pkg Type
QFP
Resolution (Bits)
14bit
Sample Rate
125MSPS
Features
- 102 dBFS 2-tone SFDR with 30 MHz and 31 MHz
- 125 MSPS guaranteed sampling rate (AD9445BSV-125)
- 2.0 V p-p to 4.0 V p-p differential full-scale input
- 3.3 V and 5 V supply operation
- 60 fsec rms jitter
- 73.0 dBFS SNR/88 dBFS SFDR with 300 MHz input (2.0 V p-p)
- 74.6 dBFS SNR/95 dBFS SFDR with 170 MHz input (2.0 V p-p)
- 74.8 dBFS SNR/95 dBFS SFDR with 30 MHz input (2.0 V p-p)
- 77.0 dBFS SNR/87 dBFS SFDR with 170 MHz input (3.2 V p-p)
- 78.3 dBFS SNR/92 dBFS SFDR with 30 MHz input (3.2 V p-p)
- 92 dBFS 2-tone SFDR with 170 MHz and 171 MHz
- Buffered analog inputs
- Data format select (offset binary or twos complement)
- DNL = ±0.25 LSB typical
- Excellent linearity
- INL = ±0.8 LSB typical
- LVDS outputs (ANSI-644 compatible) or CMOS outputs
- Output clock available
Datasheet
Extracted Text
14-Bit, 105/125 MSPS, IF Sampling ADC AD9445 FEATURES FUNCTIONAL BLOCK DIAGRAM 125 MSPS guaranteed sampling rate (AD9445BSV-125) AGND AVDD1 AVDD2 DRGND DRVDD 78.3 dBFS SNR/92 dBFS SFDR with 30 MHz input (3.2 V p-p) RF ENABLE AD9445 DFS 74.8 dBFS SNR/95 dBFS SFDR with 30 MHz input (2.0 V p-p) DCS MODE BUFFER 77.0 dBFS SNR/87 dBFS SFDR with 170 MHz input (3.2 V p-p) OUTPUT MODE 14 VIN+ 2 PIPELINE CMOS T/H OR 74.6 dBFS SNR/95 dBFS SFDR with 170 MHz input (2.0 V p-p) VIN– ADC OR 28 LVDS 73.0 dBFS SNR/88 dBFS SFDR with 300 MHz input (2.0 V p-p) D13 TO D0 OUTPUT STAGING 102 dBFS 2-tone SFDR with 30 MHz and 31 MHz 2 CLOCK CLK+ 92 dBFS 2-tone SFDR with 170 MHz and 171 MHz DCO AND TIMING REF CLK– MANAGEMENT 60 fsec rms jitter Excellent linearity DNL = ±0.25 LSB typical VREF SENSE REFT REFB INL = ±0.8 LSB typical Figure 1. 2.0 V p-p to 4.0 V p-p differential full-scale input Buffered analog inputs LVDS outputs (ANSI-644 compatible) or CMOS outputs Optional features allow users to implement various selectable Data format select (offset binary or twos complement) operating conditions, including input range, data format select, Output clock available high IF sampling mode, and output data mode. 3.3 V and 5 V supply operation The AD9445 is available in a Pb-free, 100-lead, surface-mount, APPLICATIONS plastic package (100-lead TQFP/EP) specified over the Multicarrier, multimode cellular receivers industrial temperature range −40°C to +85°C. Antenna array positioning Power amplifier linearization PRODUCT HIGHLIGHTS Broadband wireless Radar 1. High performance: outstanding SFDR performance for IF Infrared imaging sampling applications such as multicarrier, multimode 3G, Medical imaging and 4G cellular base station receivers. Communications instrumentation 2. Ease of use: on-chip reference and high input impedance track-and-hold with adjustable analog input range and an GENERAL DESCRIPTION output clock simplifies data capture. The AD9445 is a 14-bit, monolithic, sampling analog-to-digital 3. Packaged in a Pb-free, 100-lead TQFP/EP package. converter (ADC) with an on-chip IF sampling track-and-hold circuit. It is optimized for performance, small size, and ease of 4. Clock duty cycle stabilizer (DCS) maintains overall ADC use. The product operates at up to a 125 MSPS conversion rate performance over a wide range of clock pulse widths. and is designed for multicarrier, multimode receivers, such as those found in cellular infrastructure equipment. 5. OR (out-of-range) outputs indicate when the signal is beyond the selected input range. The ADC requires 3.3 V and 5.0 V power supplies and a low 6. RF enable pin allows users to configure the device for voltage differential input clock for full performance operation. optimum SFDR when sampling frequencies above 210 MHz No external reference or driver components are required for (AD9445-125) or 240 MHz (AD9445-105). many applications. Data outputs are CMOS or LVDS compatible (ANSI-644 compatible) and include the means to reduce the overall current needed for short trace distances. Rev. 0 Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. rights of third parties that may result from its use. Specifications subject to change without notice. No Tel: 781.329.4700 www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Fax: 781.461.3113 © 2005 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. 05489-001 AD9445 TABLE OF CONTENTS Features .............................................................................................. 1 Terminology.......................................................................................9 Applications....................................................................................... 1 Pin Configurations and Function Descriptions ......................... 10 General Description ......................................................................... 1 Equivalent Circuits......................................................................... 15 Functional Block Diagram .............................................................. 1 Typical Performance Characteristics ........................................... 16 Product Highlights ........................................................................... 1 Theory of Operation ...................................................................... 24 Revision History ............................................................................... 2 Analog Input and Reference Overview ................................... 24 Specifications..................................................................................... 3 Clock Input Considerations...................................................... 26 DC Specifications ......................................................................... 3 Power Considerations................................................................ 27 AC Specifications.......................................................................... 4 Digital Outputs ........................................................................... 27 Digital Specifications ................................................................... 6 Timing ......................................................................................... 27 Switching Specifications .............................................................. 6 Operational Mode Selection ..................................................... 28 Timing Diagrams.......................................................................... 7 Evaluation Board ............................................................................ 29 Absolute Maximum Ratings............................................................ 8 Outline Dimensions....................................................................... 37 Thermal Resistance ...................................................................... 8 Ordering Guide .......................................................................... 37 ESD Caution.................................................................................. 8 REVISION HISTORY 10/05—Revision 0: Initial Version Rev. 0 | Page 2 of 40 AD9445 SPECIFICATIONS DC SPECIFICATIONS AVDD1 = 3.3 V, AVDD2 = 5.0 V, DRVDD = 3.3 V, LVDS mode, specified minimum sampling rate, 2.0 V p-p differential input, internal trimmed reference (1.0 V mode), AIN = −1.0 dBFS, DCS on, unless otherwise noted. RF ENABLE = AGND. Table 1. AD9445BSVZ-105 AD9445BSVZ-125 Parameter Temp Min Typ Max Min Typ Max Unit RESOLUTION Full 14 14 Bits ACCURACY No Missing Codes Full Guaranteed Guaranteed Offset Error Full −7 +7 −7 +7 mV 25°C ±3 ±3 mV Gain Error Full −3 +3 −3 +3 % FSR 25°C −2 +2 −2 +2 % FSR 1 Differential Nonlinearity (DNL) Full −0.6 ±0.25 +0.65 −0.6 ±0.25 +0.65 LSB 5 5 1 Integral Nonlinearity (INL) 25°C ±0.65 ±0.8 LSB Full −1.6 +1.6 −2 +2 LSB VOLTAGE REFERENCE Output Voltage VREF = 1.0 V Full 0.9 1.0 1.1 0.9 1.0 1.1 V Load Regulation @ 1.0 mA Full ±2 ±2 mV Reference Input Current (External VREF = 1.6 V) Full μA INPUT REFERRED NOISE 25°C 1.0 1.0 LSB rms ANALOG INPUT Input Span VREF = 1.6 V Full 3.2 3.2 V p-p VREF = 1.0 V Full 2.0 2.0 V p-p Internal Input Common-Mode Voltage Full 3.5 3.5 V External Input Common-Mode Voltage Full 3.1 3.9 3.1 3.9 V 2 Input Resistance Full 1 1 kΩ 2 Input Capacitance Full 6 6 pF POWER SUPPLIES Supply Voltage AVDD1 Full 3.14 3.3 3.46 3.14 3.3 3.46 V AVDD2 Full 4.75 5.0 5.25 4.75 5.0 5.25 V DRVDD—LVDS Outputs Full 3.0 3.6 3.0 3.6 V DRVDD—CMOS Outputs Full 3.0 3.3 3.6 3.0 3.3 3.6 V 1 Supply Current AVDD1 Full 335 364 384 424 mA 1, 3 AVDD2 Full 169 196 172 199 mA 1 IDRVDD —LVDS Outputs Full 63 78 63 78 mA 1 IDRVDD —CMOS Outputs Full 14 14 mA PSRR Offset Full 1 1 mV/V Gain Full 0.2 0.2 %/V POWER CONSUMPTION LVDS Outputs Full 2.2 2.4 2.3 2.6 W CMOS Outputs (DC Input) Full 2.0 2.1 W 1 Measured at the maximum clock rate, fIN = 15 MHz, full-scale sine wave, with a 100 Ω differential termination on each pair of output bits for LVDS output mode and approximately 5 pF loading on each output bit for CMOS output mode. 2 Input capacitance or resistance refers to the effective impedance between one differential input pin and AGND. Refer to Figure 6 for the equivalent analog input structure. 3 For RF ENABLE = AVDD1, I increases by ~30 mA, which increases power dissipation. AVDD2 Rev. 0 | Page 3 of 40 AD9445 AC SPECIFICATIONS AVDD1 = 3.3 V, AVDD2 = 5.0 V, DRVDD = 3.3 V, LVDS mode, specified minimum sample rate, 2.0 V p-p differential input, internal trimmed reference (1.0 V mode), AIN = −1.0 dBFS, DCS on, RF ENABLE = ground, unless otherwise noted. Table 2. AD9445BSVZ-105 AD9445BSVZ-125 Parameter Temp Min Typ Max Min Typ Max Unit SIGNAL-TO-NOISE RATIO (SNR) f = 10 MHz 25°C 74.3 74.1 dB IN f = 30 MHz 25°C 73.3 74.3 72.9 73.8 dB IN Full 73 72.5 dB fIN = 170 MHz 25°C 72.9 73.6 72.3 73.2 dB 1 fIN = 225 MHz 25°C 72.2 73 72 72.9 dB Full 72.2 71.4 dB 2 f = 300 MHz 25°C 71.4 72.1 71.3 72 dB IN 2 f = 400 MHz 25°C 71 71 dB IN 2 fIN = 450 MHz 25°C 70.5 70.5 dB fIN = 10 MHz (3.2 V p-p Input) 25°C 77.6 77.3 dB f = 30 MHz (3.2 V p-p Input) 25°C 77.5 77.3 dB IN f = 170 MHz (3.2 V p-p Input) 25°C 76 76 dB IN 1 f = 225 MHz (3.2 V p-p Input) 25°C 75.3 75.4 dB IN 2 fIN = 300 MHz (3.2 V p-p Input) 25°C 73.7 73.5 dB SIGNAL-TO-NOISE AND DISTORTION (SINAD) f = 10 MHz 25°C 74.2 73.9 dB IN fIN = 30 MHz 25°C 73.2 74.2 72.8 73.7 dB Full 72.8 72.3 dB fIN = 170 MHz 25°C 72.3 73.3 72.4 73.0 dB 1 f = 225 MHz 25°C 71.4 72.5 71.9 72.5 dB IN Full 71.3 70.7 dB 2 fIN = 300 MHz 25°C 70.2 71.7 69.3 71.5 dB 2 fIN = 400 MHz 25°C 67.2 66.3 dB 2 fIN = 450 MHz 25°C 65.2 64.3 dB f = 10 MHz (3.2 V p-p Input) 25°C 77.4 76.9 dB IN f = 30 MHz (3.2 V p-p Input) 25°C 77.3 76.8 dB IN fIN = 170 MHz (3.2 V p-p Input) 25°C 75.7 75.4 dB 1 fIN = 225 MHz (3.2 V p-p Input) 25°C 75.1 75.2 dB 2 fIN = 300 MHz (3.2 V p-p Input) 25°C 72.5 71.8 dB EFFECTIVE NUMBER OF BITS (ENOB) fIN = 10 MHz 25°C 12.2 12.2 Bits fIN = 30 MHz 25°C 12.2 12.1 Bits f = 170 MHz 25°C 12.1 12.0 Bits IN 1 f = 225 MHz 25°C 12.0 12.0 Bits IN 2 fIN = 300 MHz 25°C 11.8 11.8 Bits 2 fIN = 400 MHz 25°C 11.7 11.7 Bits 2 fIN = 450 MHz 25°C 11.6 11.6 Bits Rev. 0 | Page 4 of 40 AD9445 AD9445BSVZ-105 AD9445BSVZ-125 Parameter Temp Min Typ Max Min Typ Max Unit SPURIOUS-FREE DYNAMIC RANGE (SFDR, Second or Third Harmonic) f = 10 MHz 25°C 95 95 dBc IN f = 30 MHz 25°C 84 92 85 94 dBc IN Full 83 82 dBc fIN = 170 MHz 25°C 82 94 80 91 dBc 1 fIN = 225 MHz 25°C 76 87 83 88 dBc Full 75 75 dBc 2 f = 300 MHz 25°C 76 87 75 87 dBc IN 2 fIN = 400 MHz 25°C 75 73 dBc 2 fIN = 450 MHz 25°C 70 69 dBc f = 10 MHz (3.2 V p-p Input) 25°C 92 92 dBc IN f = 30 MHz (3.2 V p-p Input) 25°C 88 91 dBc IN f = 170 MHz (3.2 V p-p Input) 25°C 86 86 dBc IN 1 fIN = 225 MHz (3.2 V p-p Input) 25°C 81 80 dBc 2 fIN = 300 MHz (3.2 V p-p Input) 25°C 77 76 dBc WORST SPUR EXCLUDING SECOND OR THIRD HARMONICS fIN = 10 MHz 25°C −97 −97 dBc fIN = 30 MHz 25°C −99 −90 −98 −89 dBc Full −90 −88 dBc f = 170 MHz 25°C −99 −92 −93 −85 dBc IN 1 f = 225 MHz 25°C −94 −88 −94 −84 dBc IN Full −86 −80 dBc 2 fIN = 300 MHz 25°C −97 −90 −92 −82 dBc 2 f = 400 MHz 25°C −93 −93 dBc IN 2 f = 450 MHz 25°C −82 −87 dBc IN fIN = 10 MHz (3.2 V p-p Input) 25°C −97 −95 dBc fIN = 30 MHz (3.2 V p-p Input) 25°C −97 −95 dBc fIN = 170 MHz (3.2 V p-p Input) 25°C −97 −95 dBc 1 f = 225 MHz (3.2 V p-p Input) 25°C −95 −94 dBc IN 2 f = 300 MHz (3.2 V p-p Input) 25°C −93 −91 dBc IN TWO-TONE SFDR f = 30.3 MHz @ −7 dBFS, 25°C 102 102 dBFS IN 31.3 MHz @ −7 dBFS fIN = 170.3 MHz @ −7 dBFS, 25°C 92 91 dBFS 171.3 MHz @ −7 dBFS ANALOG BANDWIDTH Full 615 615 MHz 1 RF ENABLE = low (AGND ) for AD9445-105; RF ENABLE = high (AVDD1) for AD9445-125. 2 RF ENABLE = high (AVDD1). Rev. 0 | Page 5 of 40 AD9445 DIGITAL SPECIFICATIONS AVDD1 = 3.3 V, AVDD2 = 5.0 V, DRVDD = 3.3 V, RLVDS_BIAS = 3.74 kΩ, unless otherwise noted. Table 3. AD9445BSVZ-105 AD9445BSVZ-125 Parameter Temp Min Typ Max Min Typ Max Unit CMOS LOGIC INPUTS (DFS, DCS MODE, OUTPUT MODE) High Level Input Voltage Full 2.0 2.0 V Low Level Input Voltage Full 0.8 0.8 V High Level Input Current Full 200 200 μA Low Level Input Current Full −10 +10 −10 +10 μA Input Capacitance Full 2 2 pF 1 DIGITAL OUTPUT BITS—CMOS MODE (D0 to D13, OTR) DRVDD = 3.3 V High Level Output Voltage Full 3.25 3.25 V Low Level Output Voltage Full 0.2 0.2 V DIGITAL OUTPUT BITS—LVDS MODE (D0 to D13, OTR) 2 VOD Differential Output Voltage Full 247 545 247 545 mV VOS Output Offset Voltage Full 1.125 1.375 1.125 1.375 V CLOCK INPUTS (CLK+, CLK−) Differential Input Voltage Full 0.2 0.2 V Common-Mode Voltage Full 1.3 1.5 1.6 1.3 1.5 1.6 V Differential Input Resistance Full 1.1 1.4 1.7 1.1 1.4 1.7 kΩ Differential Input Capacitance Full 2 2 pF 1 Output voltage levels measured with 5 pF load on each output. 2 LVDS RTERM = 100 Ω. SWITCHING SPECIFICATIONS AVDD1 = 3.3 V, AVDD2 = 5.0 V, DRVDD = 3.3 V, unless otherwise noted. Table 4. AD9445BSVZ-105 AD9445BSVZ-125 Parameter Temp Min Typ Max Min Typ Max Unit CLOCK INPUT PARAMETERS Maximum Conversion Rate Full 105 125 MSPS Minimum Conversion Rate Full 10 10 MSPS CLK Period Full 9.5 8.0 ns 1 CLK Pulse Width High (tCLKH) Full 3.8 3.2 ns 1 CLK Pulse Width Low (t) Full 3.8 3.2 ns CLKL DATA OUTPUT PARAMETERS 2 Output Propagation Delay—CMOS (tPD) (Dx, DCO+) Full 3.35 3.35 ns 3 3 Output Propagation Delay—LVDS (t ) (Dx+), (t ) (DCO+) Full 2.1 3.6 4.8 2.3 3.6 4.8 ns PD CPD Pipeline Delay (Latency) Full 13 13 Cycles Aperture Delay (tA) Full ns Aperture Uncertainty (Jitter, tJ) Full 60 60 fsec rms 1 With duty cycle stabilizer (DCS) enabled. 2 Output propagation delay is measured from clock 50% transition to data 50% transition with 5 pF load. 3 LVDS RTERM = 100 Ω. Measured from the 50% point of the rising edge of CLK+ to the 50% point of the data transition. Rev. 0 | Page 6 of 40 AD9445 TIMING DIAGRAMS N– 1 N N + 1 A IN t CLKL t CLKH 1/f S CLK+ CLK– t PD N – 13 N– 12 N N + 1 DATA OUT 13 CLOCK CYCLES DCO+ DCO– t CPD Figure 2. LVDS Mode Timing Diagram N N–1 N + 1 VIN N + 2 t CLKL t CLKH CLK– CLK+ t PD 13 CLOCK CYCLES N – 13 N – 12 N – 1 N DX DCO+ DCO– Figure 3. CMOS Timing Diagram Rev. 0 | Page 7 of 40 05489-003 05489-002 AD9445 ABSOLUTE MAXIMUM RATINGS Table 5. Stresses above those listed under Absolute Maximum Ratings With may cause permanent damage to the device. This is a stress Respect rating only; functional operation of the device at these or any Parameter To Rating other conditions above those indicated in the operational ELECTRICAL section of this specification is not implied. Exposure to absolute AVDD1 AGND −0.3 V to +4 V maximum rating conditions for extended periods may affect AVDD2 AGND −0.3 V to +6 V device reliability. DRVDD DGND −0.3 V to +4 V AGND DGND −0.3 V to +0.3 V THERMAL RESISTANCE AVDD1 DRVDD −4 V to +4 V The heat sink of the AD9445 package must be soldered to ground. AVDD2 DRVDD −4 V to +6 V AVDD2 AVDD1 −4 V to +6 V Table 6. D0± to D13± DGND –0.3 V to DRVDD + 0.3 V Package Type θJA θJB θJC Unit CLK+/CLK− AGND –0.3 V to AVDD1 + 0.3 V 100-lead TQFP/EP 19.8 8.3 2 °C/W OUTPUT MODE, DCS AGND –0.3 V to AVDD1 + 0.3 V MODE, DFS, SFDR, Typical θJA = 19.8°C/W (heat sink soldered) for multilayer RF ENABLE board in still air. VIN+, VIN− AGND –0.3 V to AVDD2 + 0.3 V VREF AGND –0.3 V to AVDD1 + 0.3 V Typical θ = 8.3°C/W (heat sink soldered) for multilayer board JB SENSE AGND –0.3 V to AVDD1 + 0.3 V in still air. REFT, REFB AGND –0.3 V to AVDD1 + 0.3 V Typical θ = 2°C/W (junction to exposed heat sink) represents ENVIRONMENTAL JC the thermal resistance through heat sink path. Storage Temperature –65°C to +125°C Range Airflow increases heat dissipation, effectively reducing θJA. Also, Operating Temperature –40°C to +85°C more metal directly in contact with the package leads from Range metal traces through holes, ground, and power planes reduces Lead Temperature 300°C (Soldering 10 sec) the θ . It is required that the exposed heat sink be soldered to JA Junction Temperature 150°C the ground plane. ESD CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although this product features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality. Rev. 0 | Page 8 of 40 AD9445 TERMINOLOGY Analog Bandwidth (Full Power Bandwidth) Minimum Conversion Rate The analog input frequency at which the spectral power of the The clock rate at which the SNR of the lowest analog signal fundamental frequency (as determined by the FFT analysis) is frequency drops by no more than 3 dB below the guaranteed reduced by 3 dB. limit. Aperture Delay (t ) Offset Error A The delay between the 50% point of the rising edge of the clock The major carry transition should occur for an analog value of and the instant at which the analog input is sampled. ½ LSB below VIN+ = VIN−. Offset error is defined as the deviation of the actual transition from that point. Aperture Uncertainty (Jitter, t ) J The sample-to-sample variation in aperture delay. Out-of-Range Recovery Time The time it takes for the ADC to reacquire the analog input Clock Pulse Width and Duty Cycle after a transition from 10% above positive full scale to 10% Pulse width high is the minimum amount of time that the above negative full scale, or from 10% below negative full scale clock pulse should be left in the Logic 1 state to achieve rated to 10% below positive full scale. performance. Pulse width low is the minimum time the clock pulse should be left in the low state. At a given clock rate, these Output Propagation Delay (t ) PD specifications define an acceptable clock duty cycle. The delay between the clock rising edge and the time when all bits are within valid logic levels. Differential Nonlinearity (DNL, No Missing Codes) An ideal ADC exhibits code transitions that are exactly 1 LSB Power-Supply Rejection Ratio apart. DNL is the deviation from this ideal value. Guaranteed The change in full scale from the value with the supply at the no missing codes to 14-bit resolution indicates that all 16,384 minimum limit to the value with the supply at the maximum codes must be present over all operating ranges. limit. Effective Number of Bits (ENOB) Signal-to-Noise and Distortion (SINAD) The effective number of bits for a sine wave input at a given The ratio of the rms input signal amplitude to the rms value of input frequency can be calculated directly from its measured the sum of all other spectral components below the Nyquist SINAD using the following formula: frequency, including harmonics but excluding dc. () SINAD−1.76 Signal-to-Noise Ratio (SNR) ENOB= 6.02 The ratio of the rms input signal amplitude to the rms value of the sum of all other spectral components below the Nyquist Gain Error frequency, excluding the first six harmonics and dc. The first code transition should occur at an analog value of ½ LSB above negative full scale. The last transition should occur Spurious-Free Dynamic Range (SFDR) at an analog value of 1½ LSB below the positive full scale. Gain The ratio of the rms signal amplitude to the rms value of the error is the deviation of the actual difference between first and peak spurious spectral component. The peak spurious component last code transitions and the ideal difference between first and may be a harmonic. SFDR can be reported in dBc (that is, degrades last code transitions. as signal level is lowered) or dBFS (always related back to converter full scale). Integral Nonlinearity (INL) The deviation of each individual code from a line drawn from Temperature Drift negative full scale through positive full scale. The point used as The temperature drift for offset error and gain error specifies negative full scale occurs ½ LSB before the first code transition. the maximum change from the initial (25°C) value to the value Positive full scale is defined as a level 1½ LSB beyond the last at T or T . MIN MAX code transition. The deviation is measured from the middle of Total Harmonic Distortion (THD) each particular code to the true straight line. The ratio of the rms input signal amplitude to the rms value of Maximum Conversion Rate the sum of the first six harmonic components. The clock rate at which parametric testing is performed. Two-Tone SFDR The ratio of the rms value of either input tone to the rms value of the peak spurious component. The peak spurious component may or may not be an IMD product. Rev. 0 | Page 9 of 40 AD9445 PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 1 75 DCS MODE DRGND PIN 1 DNC 2 74 D8+ OUTPUT MODE 3 73 D8– DFS 4 72 D7+ LVDS_BIAS 5 71 D7– 6 70 AVDD1 D6+ SENSE 7 69 D6– VREF 8 68 DCO+ AD9445 9 67 AGND DCO– LVDS MODE REFT 10 66 D5+ TOP VIEW (Not to Scale) 11 65 REFB D5– 12 64 AVDD2 DRVDD 13 63 AVDD2 DRGND 14 62 AVDD2 D4+ 15 61 AVDD2 D4– 16 60 AVDD2 D3+ 17 59 AVDD2 D3– 18 58 AVDD1 D2+ 19 57 AVDD1 D2– AVDD1 20 56 D1+ AGND 21 55 D1– VIN+ 22 54 D0+ VIN– 23 53 D0– (LSB) AGND 24 52 DNC AVDD2 25 51 DNC 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 DNC = DO NOT CONNECT Figure 4. 100-Lead TQFP/EP Pin Configuration in LVDS Mode Rev. 0 | Page 10 of 40 AVDD2 RF ENABLE AVDD2 AGND AVDD2 AGND AVDD2 AVDD1 AVDD2 AVDD1 AVDD2 AVDD1 AVDD1 AVDD1 AVDD1 AVDD1 AVDD1 AVDD1 AVDD2 AGND AVDD1 OR+ AVDD2 OR– AVDD1 DRVDD AGND DRGND CLK+ D13+ (MSB) CLK– D13– AGND D12+ AVDD1 D12– AVDD1 D11+ AVDD1 D11– AGND D10+ DRGND D10– DRVDD D9+ DNC D9– DNC DRVDD 05489-004 AD9445 Table 7. Pin Function Descriptions—100-Lead TQFP/EP in LVDS Mode Pin No. Mnemonic Description 1 DCS MODE Clock Duty Cycle Stabilizer (DCS) Control Pin. CMOS compatible. DCS = low (AGND) to enable DCS (recommended); DCS = high (AVDD1) to disable DCS. 2, 49 to 52 DNC Do Not Connect. These pins should float. 3 OUTPUT MODE CMOS-Compatible Output Logic Mode Control Pin. OUTPUT MODE = 0 for CMOS mode; OUTPUT MODE = 1 (AVDD1) for LVDS outputs. 4 DFS Data Format Select Pin. CMOS control pin that determines the format of the output data. DFS = high (AVDD1) for twos complement; DFS = low (ground) for offset binary format. 5 LVDS_BIAS Set Pin for LVDS Output Current. Place 3.7 kΩ resistor terminated to DRGND. 6, 18 to 20, 32 to 34, 36, 38, AVDD1 3.3 V (±5%) Analog Supply. 43 to 45, 92 to 97 7 SENSE Reference Mode Selection. Connect to AGND for internal 1 V reference; connect to AVDD1 for external reference. 8 VREF 1.0 V Reference I/O. Function dependent on SENSE and external programming resistors. Decouple to ground with 0.1 μF and 10 μF capacitors. 9, 21, 24, 39, 42, 46, 91, 98, 99, AGND Analog Ground. The exposed heat sink on the bottom of the package must be Exposed Heat Sink connected to AGND. 10 REFT Differential Reference Output. Decoupled to ground with 0.1 μF capacitor and to REFB (Pin 14) with 0.1 μF and 10 μF capacitors. 11 REFB Differential Reference Output. Decoupled to ground with a 0.1 μF capacitor and to REFT (Pin 13) with 0.1 μF and 10 μF capacitors. 12 to 17, 25 to 31, 35, 37 AVDD2 5.0 V Analog Supply (±5%). 22 VIN+ Analog Input—True. 23 VIN− Analog Input—Complement. 40 CLK+ Clock Input—True. 41 CLK− Clock Input—Complement. 47, 63, 75, 87 DRGND Digital Output Ground. 48, 64, 76, 88 DRVDD 3.3 V Digital Output Supply (3.0 V to 3.6 V). 53 D0− (LSB) D0 Complement Output Bit (LVDS Levels). 54 D0+ D0 True Output Bit. 55 D1− D1 Complement Output Bit. 56 D1+ D1 True Output Bit. 57 D2− D2 Complement Output Bit. 58 D2+ D2 True Output Bit. 59 D3− D3 Complement Output Bit. 60 D3+ D3 True Output Bit. 61 D4− D4 Complement Output Bit. 62 D4+ D4 True Output Bit. 65 D5− D5 Complement Output Bit. 66 D5+ D5 True Output Bit. 67 DCO− Data Clock Output—Complement. 68 DCO+ Data Clock Output—True. 69 D6− D6 Complement Output Bit. 70 D6+ D6 True Output Bit. 71 D7− D7 Complement Output Bit. 72 D7+ D7 True Output Bit. 73 D8− D8 Complement Output Bit. 74 D8+ D8 True Output Bit. 77 D9− D9 Complement Output Bit. 78 D9+ D9 True Output Bit. 79 D10− D10 Complement Output Bit. 80 D10+ D10 True Output Bit. 81 D11− D11 Complement Output Bit. 82 D11+ D11 True Output Bit. Rev. 0 | Page 11 of 40 AD9445 Pin No. Mnemonic Description 83 D12− D12 Complement Output Bit. 84 D12+ D12 True Output Bit. 85 D13− D13 Complement Output Bit. 86 D13+ (MSB) D13 True Output Bit. 89 OR− Out-of-Range Complement Output Bit. 90 OR+ Out-of-Range True Output Bit. 100 RF ENABLE RF ENABLE Control Pin. CMOS-compatible control pin to optimize the configuration of the AD9445 analog front end. Connecting RF ENABLE to AGND optimizes SFDR performance for applications with analog input frequencies <210 MHz for 125 MSPS speed grade and <230 MHz for the 105 MSPS speed grade. For applications with analog inputs >225 MHz for the 125 MSPS speed grade and >230 MHz for the 105 MSPS speed grade, this pin should be connected to AVDD1 for optimum SFDR performance. Power dissipation from AVDD2 increases by 150 mW to 200 mW. Rev. 0 | Page 12 of 40 AD9445 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 1 75 DCS MODE DRGND PIN 1 2 74 DNC D2 3 73 OUTPUT MODE D1 4 72 DFS D0 (LSB) 5 71 LVDS_BIAS DNC 6 70 AVDD1 DNC 7 69 SENSE DNC VREF 8 68 DCO+ AD9445 AGND 9 67 DCO– CMOS MODE REFT 10 66 DNC TOP VIEW (Not to Scale) REFB 11 65 DNC AVDD2 12 64 DRVDD AVDD2 13 63 DRGND AVDD2 14 62 DNC AVDD2 15 61 DNC AVDD2 16 60 DNC 17 59 AVDD2 DNC 18 58 AVDD1 DNC 19 57 AVDD1 DNC 20 56 AVDD1 DNC 21 55 AGND DNC 22 54 VIN+ DNC 23 53 VIN– DNC 24 52 AGND DNC 25 51 AVDD2 DNC 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 DNC = DO NOT CONNECT Figure 5. 100-Lead TQFP/EP Pin Configuration in CMOS Mode Rev. 0 | Page 13 of 40 AVDD2 RF ENABLE AVDD2 AGND AVDD2 AGND AVDD2 AVDD1 AVDD2 AVDD1 AVDD2 AVDD1 AVDD1 AVDD1 AVDD1 AVDD1 AVDD1 AVDD1 AVDD2 AGND AVDD1 OR AVDD2 D13 (MSB) AVDD1 DRVDD AGND DRGND CLK+ D12 CLK– D11 AGND D10 AVDD1 D9 AVDD1 D8 AVDD1 D7 AGND D6 DRGND D5 DRVDD D4 DNC D3 DNC DRVDD 05489-005 AD9445 Table 8. Pin Function Descriptions—100-Lead TQFP/EP in CMOS Mode Pin No. Mnemonic Description 1 DCS MODE Clock Duty Cycle Stabilizer (DCS) Control Pin. CMOS compatible. DCS = low (AGND) to enable DCS (recommended); DCS = high (AVDD1) to disable DCS. 2, 49 to 62, 65 to 66, 69 to 71 DNC Do Not Connect. These pins should float. 3 OUTPUT CMOS-Compatible Output Logic Mode Control Pin. OUTPUT MODE = 0 for CMOS mode; MODE OUTPUT MODE = 1 (AVDD1) for LVDS outputs. 4 DFS Data Format Select Pin. CMOS control pin that determines the format of the output data. DFS = high (AVDD1) for twos complement; DFS = low (ground) for offset binary format. 5 LVDS_BIAS Set Pin for LVDS Output Current. Place 3.7 kΩ resistor terminated to DRGND. 6, 18 to 20, 32 to 34, 36, 38, AVDD1 3.3 V (±5%) Analog Supply. 43 to 45, 92 to 97 7 SENSE Reference Mode Selection. Connect to AGND for internal 1 V reference; connect to AVDD1 for external reference. 8 VREF 1.0 V Reference I/O. Function dependent on SENSE and external programming resistors. Decouple to ground with 0.1 μF and 10 μF capacitors. 9, 21, 24, 39, 42, 46, 91, 98, AGND Analog Ground. The exposed heat sink on the bottom of the package must be connected to 99, Exposed Heat Sink AGND. 10 REFT Differential Reference Output. Decoupled to ground with 0.1 μF capacitor and to REFB (Pin 14) with 0.1 μF and 10 μF capacitors. 11 REFB Differential Reference Output. Decoupled to ground with a 0.1 μF capacitor and to REFT (Pin 13) with 0.1 μF and 10 μF capacitors. 12 to 17, 25 to 31, 35, 37 AVDD2 5.0 V Analog Supply (±5%). 22 VIN+ Analog Input—True. 23 VIN− Analog Input—Complement. 40 CLK+ Clock Input—True. 41 CLK− Clock Input—Complement. 47, 63, 75, 87 DRGND Digital Output Ground. 48, 64, 76, 88 DRVDD 3.3 V Digital Output Supply (3.0 V to 3.6 V). 67 DCO− Data Clock Output—Complement. 68 DCO+ Data Clock Output—True. 72 D0 (LSB) D0 True Output Bit (CMOS levels). 73 D1 D1 True Output Bit. 74 D2 D2 True Output Bit. 77 D3 D3 True Output Bit. 78 D4 D4 True Output Bit. 79 D5 D5 True Output Bit. 80 D6 D6 True Output Bit. 81 D7 D7 True Output Bit. 82 D8 D8 True Output Bit. 83 D9 D9 True Output Bit. 84 D10 D10 True Output Bit. 85 D11 D11 True Output Bit. 86 D12 D12 True Output Bit. 89 D13 (MSB) D13 True Output Bit. 90 OR Out-of-Range True Output Bit. 100 RF ENABLE RF ENABLE CMOS-compatible Control Pin. Optimizes the configuration of the analog front end. Connecting RF ENABLE to AGND optimizes SFDR performance for applications with analog input frequencies <210 MHz for 125 MSPS speed grade and <230 MHz for the 105 MSPS speed grade. For applications with analog inputs >225 MHz for the 125 MSPS speed grade and >230 MHz for the 105 MSPS speed grade, this pin should be connected to AVDD1 for optimum SFDR. Power dissipation from AVDD2 increases by 150 mW to 200 mW. Rev. 0 | Page 14 of 40 AD9445 EQUIVALENT CIRCUITS AVDD2 VIN+ 6pF 1kΩ DRVDD X1 T/H 3.5V 1kΩ DX AVDD2 VIN– 6pF Figure 6. Equivalent Analog Input Circuit Figure 9. Equivalent CMOS Digital Output Circuit VDD DRVDD DRVDD RF ENABLE, DCS K MODE, OUTPUT 1.2V MODE, DFS 30kΩ LVDS_BIAS 3.74kΩ I LVDSOUT Figure 10. Equivalent Digital Input Circuit, Figure 7. Equivalent LVDS_BIAS Circuit DFS, DCS MODE, OUTPUT MODE AVDD2 DRVDD 3kΩ 3kΩ CLK+ CLK– V V DX– DX+ 2.5kΩ 2.5kΩ V V Figure 11. Equivalent Sample Clock Input Circuit Figure 8. Equivalent LVDS Digital Output Circuit Rev. 0 | Page 15 of 40 05489-008 05489-007 05489-006 05489-009 05489-010 05489-011 AD9445 TYPICAL PERFORMANCE CHARACTERISTICS AVDD1 = 3.3 V, AVDD2 = 5.0 V, DRVDD = 3.3 V, rated sample rate, LVDS mode, DCS enabled, TA = 25°C, 2.0 V p-p differential input, AIN = −1.0 dBFS, internal trimmed reference (nominal VREF = 1.0 V), unless otherwise noted. 0 0 125MSPS 125MSPS –10 –10 30.3MHz @ –1.0dBFS 225.3MHz @ –1.0dBFS SNR = 73.4dB SNR = 72.9dB –20 –20 ENOB = 12.1BITS ENOB = 12.1BITS SFDR = 94dBc SFDR = 88dBc –30 –30 –40 –40 –50 –50 –60 –60 –70 –70 –80 –80 –90 –90 –100 –100 –110 –110 –120 –120 –130 –130 0 15.625 31.250 46.875 62.500 0 15.625 31.250 46.875 62.500 FREQUENCY (MHz) FREQUENCY (MHz) Figure 12. AD9445-125 64k Point Single-Tone FFT/125 MSPS/30.3 MHz Figure 15. AD9445-125 64k Point Single-Tone FFT/125 MSPS/225.3 MHz 0 0 125MSPS 125MSPS –10 –10 100.3MHz @ –1.0dBFS 300.3MHz @ –1.0dBFS SNR = 0dB SNR = 72.0dB –20 –20 ENOB = 12.1BITS ENOB = 11.8BITS SFDR = 96dBc SFDR = 87dBc –30 –30 –40 –40 –50 –50 –60 –60 –70 –70 –80 –80 –90 –90 –100 –100 –110 –110 –120 –120 –130 –130 0 15.625 31.250 46.875 62.500 0 15.625 31.250 46.875 62.500 FREQUENCY (MHz) FREQUENCY (MHz) Figure 13. AD9445-125 64k Point Single-Tone FFT/125 MSPS/100.3 MHz Figure 16. AD9445-125 64k Point Single-Tone FFT/125 MSPS/300.3 MHz 0 0 125MSPS 125MSPS –10 –10 170.3MHz @ –1.0dBFS 450.3MHz @ –1.0dBFS SNR = 73.2dB SNR = 70.5dB –20 –20 ENOB = 12.0BITS ENOB = 11.6BITS SFDR = 91dBc SFDR = 69dBc –30 –30 –40 –40 –50 –50 –60 –60 –70 –70 –80 –80 –90 –90 –100 –100 –110 –110 –120 –120 –130 –130 0 15.625 31.250 46.875 62.500 0 15.625 31.250 46.875 62.500 FREQUENCY (MHz) FREQUENCY (MHz) Figure 14. AD9445-125 64k Point Single-Tone FFT/125 MSPS/170.3 MHz Figure 17. AD9445-125 64k Point Single-Tone FFT/125 MSPS/450.3 MHz Rev. 0 | Page 16 of 40 AMPLITUDE (dBFS) AMPLITUDE (dBFS) AMPLITUDE (dBFS) 05489-014 05489-013 05489-012 AMPLITUDE (dBFS) AMPLITUDE (dBFS) AMPLITUDE (dBFS) 05489-017 05489-016 05489-015 AD9445 100 100 SFDR +85°C SFDR +85°C 95 95 SFDR –40°C SFDR +25°C 90 90 SFDR –40°C SFDR +25°C 85 85 SNR +25°C SNR –40°C 80 80 SNR –40°C 75 75 SNR +25°C 70 70 SNR +85°C SNR +85°C 65 65 60 60 55 55 0 50 100 150 200 250 300 350 400 450 0 50 100 150 200 250 300 350 400 450 ANALOG INPUT FREQUENCY (MHz) ANALOG INPUT FREQUENCY (MHz) Figure 18. AD9445-125 SNR/SFDR vs. Analog Input Frequency, Figure 21. AD9445-125 SNR/SFDR vs. Analog Input Frequency, 125 MSPS, 2.0 V p-p Input Range 125 MSPS, 3.2 V p-p Input Range 100 105 SFDR +25°C SFDR +85°C 95 125M SFDR dBc 100 90 95 105M SFDR dBc 85 SFDR –40°C SNR +25°C SNR –40°C 90 80 75 85 70 80 SNR +85°C 65 125M SNR dB 75 60 105M SNR dB 55 70 0 10 20 30 40 50 60 70 80 90 100 0 20 40 60 80 100 120 140 ANALOG INPUT FREQUENCY (MHz) SAMPLE RATE (MSPS) Figure 19. AD9445-125 SNR/SFDR vs. Analog Input Frequency, Figure 22. AD9445 Single-Tone SNR/SFDR vs. Sample Rate 2.3 MHz 3.2 V p-p Input Range, 125 MSPS, CMOS Output Mode 120 120 SFDR dBFS SFDR dBFS 100 100 80 80 SNR dBFS SNR dBFS 60 60 40 40 SFDR dBc SFDR dBc 20 20 SNR dB SNR dB 0 0 –100 –90 –80 –70 –60 –50 –40 –30 –20 –10 0 –100 –90 –80 –70 –60 –50 –40 –30 –20 –10 0 ANALOG INPUT AMPLITUDE (dB) ANALOG INPUT AMPLITUDE (dB) Figure 20. AD9445-125 SNR/SFDR vs. Analog Input Level, Figure 23. AD9445-125 SNR/SFDR vs. Analog Input Level, 125 MSPS/225.3 MHz 125 MSPS/225.3 MHz, CMOS Output Mode Rev. 0 | Page 17 of 40 (dB) (dB) (dB) 05489-020 05489-019 05489-018 (dB) (dB) (dB) 05489-023 05489-022 05489-021 AD9445 0 0 105MSPS 105MSPS –10 –10 30.3MHz @ –1.0dBFS 225.3MHz @ –1.0dBFS SNR = 74.3dB SNR = 73.0dB –20 –20 ENOB = 12.2BITS ENOB = 12.0BITS SFDR = 92dBc SFDR = 87dBc –30 –30 –40 –40 –50 –50 –60 –60 –70 –70 –80 –80 –90 –90 –100 –100 –110 –110 –120 –120 –130 –130 0 13.125 26.250 39.375 52.500 0 13.125 26.250 39.375 52.500 FREQUENCY (MHz) FREQUENCY (MHz) Figure 24. AD9445-105 64k Point Single-Tone FFT/105 MSPS/30.3 MHz Figure 27. AD9445-105 64k Point Single-Tone FFT/105 MSPS/225.3 MHz 0 0 105MSPS 105MSPS –10 –10 100.3MHz @ –1.0dBFS 300.3MHz @ –1.0dBFS SNR = 73.5dB SNR = 72.1dB –20 –20 ENOB = 11.8BITS ENOB = 11.8BITS SFDR = 93dBc SFDR = 87dBc –30 –30 –40 –40 –50 –50 –60 –60 –70 –70 –80 –80 –90 –90 –100 –100 –110 –110 –120 –120 –130 –130 0 13.125 26.250 39.375 52.500 0 13.125 26.250 39.375 52.500 FREQUENCY (MHz) FREQUENCY (MHz) Figure 25. AD9445-105 64k Point Single-Tone FFT/105 MSPS/100.3 MHz Figure 28. AD9445-105 64k Point Single-Tone FFT/105 MSPS/300.3 MHz 0 0 105MSPS 105MSPS –10 –10 170.3MHz @ –1.0dBFS 450.3MHz @ –1.0dBFS SNR = 73.6dB SNR = 70.5dB –20 –20 ENOB = 12.1BITS ENOB = 11.6BITS SFDR = 94dBc SFDR = 70dBc –30 –30 –40 –40 –50 –50 –60 –60 –70 –70 –80 –80 –90 –90 –100 –100 –110 –110 –120 –120 –130 –130 0 13.125 26.250 39.375 52.500 0 13.125 26.250 39.375 52.500 FREQUENCY (MHz) FREQUENCY (MHz) Figure 26. AD9445-105 64k Point Single-Tone FFT/105 MSPS/170.3 MHz Figure 29. AD9445-105 64k Point Single-Tone FFT/105 MSPS/450.3 MHz Rev. 0 | Page 18 of 40 AMPLITUDE (dBFS) AMPLITUDE (dBFS) AMPLITUDE (dBFS) 05489-026 05489-025 05489-024 AMPLITUDE (dBFS) AMPLITUDE (dBFS) AMPLITUDE (dBFS) 05489-029 05489-028 05489-027 AD9445 100 100 SFDR +25°C SFDR –40°C 95 95 SFDR +25°C 90 90 SFDR +85°C SFDR +85°C SFDR –40°C 85 85 80 80 SNR –40°C SNR –40°C 75 75 SNR +25°C 70 70 SNR +85°C SNR +85°C SNR +25°C 65 65 60 60 55 55 0 50 100 150 200 250 300 350 400 450 0 50 100 150 200 250 300 350 400 450 ANALOG INPUT FREQUENCY (MHz) ANALOG INPUT FREQUENCY (MHz) Figure 30. AD9445-105 SNR/SFDR vs. Analog Input Frequency, Figure 33. AD9445-105 SNR/SFDR vs. Analog Input Frequency, 105 MSPS, 2.0 V p-p 105 MSPS, 3.2 V p-p 100 100 SFDR +25°C SFDR +85°C 95 SFDR dBc 95 90 90 85 SFDR –40°C 85 80 SNR –40°C 80 75 75 SNR dB 70 SNR +25°C SNR +85°C 70 65 65 60 60 55 2.7 2.9 3.1 3.3 3.5 3.7 3.9 4.1 4.3 0 20 40 60 80 100 120 140 160 180 ANALOG INPUT COMMON-MODE VOLTAGE ANALOG INPUT FREQUENCY (MHz) Figure 31. AD9445-105 SNR/SFDR vs. Analog Input Frequency, Figure 34. AD9445-105 SNR/SFDR vs. Analog Input Common Mode, 3.2 V p-p Input Range, 105 MSPS, CMOS Output Mode 105 MSPS/10.3 MHz 120 120 SFDR dBFS SFDR dBFS 100 100 80 80 SNR dBFS SNR dBFS 60 60 SFDR dBc 40 40 SFDR dBc 20 20 SNR dB SNR dB 0 0 –100 –90 –80 –70 –60 –50 –40 –30 –20 –10 0 –100 –90 –80 –70 –60 –50 –40 –30 –20 –10 0 ANALOG INPUT AMPLITUDE (dB) ANALOG INPUT AMPLITUDE (dB) Figure 32. AD9445-105 SNR/SFDR vs. Analog Input Level, Figure 35. AD9445-105 SNR/SFDR vs. Analog Input Level, 105 MSPS/225.3 MHz 105 MSPS/225.3 MHz, CMOS Output Mode Rev. 0 | Page 19 of 40 (dB) (dB) (dB) 05489-032 05489-031 05489-030 (dB) (dB) (dB) 05489-035 05489-034 05489-033 AD9445 0 0 125MSPS –10 –10 30.3MHz @ –7.0dBFS 31.3MHz @ –7.0dBFS –20 –20 SFDR = 102dBFS –30 SFDR dBc –30 –40 –40 –50 –50 WORST IMD3 dBc –60 –70 –60 –80 –70 –90 –80 –100 –90 –110 SFDR dBFS –100 –120 –110 –130 WORST IMD3 dBFS –140 –120 0 13.625 27.250 40.875 54.500 –100 –90 –80 –70 –60 –50 –40 –30 –20 –10 0 FREQUENCY (MHz) FUNDAMENTAL LEVEL (dB) Figure 36. AD9445-125 64k Point Two-Tone FFT/ Figure 39. AD9445-125 Two-Tone SFDR vs. Analog Input Level 125 MSPS/30.3 MHz, 31.3 MHz 125 MSPS/170.3 MHz, 171.3 MHz 0 0 105MSPS –10 –10 30.3MHz @ –7.0dBFS 31.3MHz @ –7.0dBFS –20 –20 SFDR = 102dBFS –30 SFDR dBc –30 –40 –40 –50 –50 –60 WORST IMD3 dBc –60 –70 –80 –70 –90 –80 –100 –90 SFDR dBFS –110 –100 –120 –110 –130 WORST IMD3 dBFS –120 –140 –100 –90 –80 –70 –60 –50 –40 –30 –20 –10 0 0 0 13.125 26.250 39.375 52.500 FUNDAMENTAL LEVEL (dB) FREQUENCY (MHz) Figure 37. AD9445-125 Two-Tone SFDR vs. Analog Input Level Figure 40. AD9445-105 64k Point Two-Tone FFT/105 MSPS/30.3 MHz, 31.3 MHz 125 MSPS/30.3 MHz, 31.3 MHz 0 0 125MSPS –10 –10 170.3MHz @ –7.0dBFS 171.3MHz @ –7.0dBFS –20 –20 SFDR = 91dBFS –30 –30 –40 SFDR dBc –40 –50 –50 –60 WORST IMD3 dBc –70 –60 –80 –70 –90 –80 –100 –90 –110 –100 SFDR dBFS –120 –130 –110 WORST IMD3 dBFS –140 –120 0 13.625 27.250 40.875 54.500 –100 –90 –80 –70 –60 –50 –40 –30 –20 –10 0 FREQUENCY (MHz) FUNDAMENTAL LEVEL (dB) Figure 38. AD9445-125 64k Point Two-Tone FFT/ Figure 41. AD9445-105 Two-Tone SFDR vs. Analog Input Level 125 MSPS/170.3 MHz, 171.3 MHz 105 MSPS/30.3 MHz, 31.3 MHz Rev. 0 | Page 20 of 40 AMPLITUDE (dBFS) SPUR AND IMD3 (dB) AMPLITUDE (dBFS) 05489-040 05489-038 05489-037 SPUR AND IMD3 (dB) AMPLITUDE (dBFS) SPUR AND IMD3 (dB) 05489-043 05489-042 05489-041 AD9445 25000 30000 23754 SAMPLE SIZE = 65538 22190 26294 25000 20000 20000 15000 16117 15743 15000 10000 9003 7968 10000 5000 5000 3493 3350 1355 1127 307 62 75 3 227 2 2 0 0 N – 4 N – 3 N – 2 N – 1 N N + 1 N + 2 N + 3 N + 4 N – 4 N – 3 N – 2 N – 1 N N + 1 N + 2 N + 3 N + 4 OUTPUT CODE OUTPUT CODE Figure 42. AD9445-125 Grounded Input Histogram Figure 45. AD9445-105 Grounded Input Histogram 0 0 105MSPS –10 170.3MHz @ –7.0dBFS –0.1 171.3MHz @ –7.0dBFS –20 SFDR = 92dBFS –30 –0.2 –40 –50 –0.3 –60 –70 –0.4 –80 –0.5 –90 –100 –0.6 –110 –120 –0.7 –130 –140 –0.8 0 0 13.125 26.250 39.375 52.500 –40 –20 0 20 40 60 80 FREQUENCY (MHz) TEMPERATURE (°C) Figure 43. AD9445-105 64k Point Two-Tone FFT/105 MSPS/170.3 MHz, 171.3 MHz Figure 46. AD9445-125 Gain vs. Temperature 0.4 0 –10 0.3 –20 0.2 –30 SFDR dBc –40 0.1 –50 WORST IMD3 dBc 0 –60 –70 –0.1 –80 –0.2 –90 SFDR dBFS –100 –0.3 –110 WORST IMD3 dBFS –0.4 –120 0 0 4096 8192 12288 16384 –100 –90 –80 –70 –60 –50 –40 –30 –20 –10 0 OUTPUT CODE FUNDAMENTAL LEVEL (dB) Figure 44. AD9445-105 Two-Tone SFDR vs. Analog Input Level Figure 47. AD9445-105 DNL Error vs. Output Code, 105 MSPS, 10.3 MHz 105 MSPS/170.3 MHz, 171.3 MHz Rev. 0 | Page 21 of 40 FREQUENCY SPUR AND IMD3 (dB) AMPLITUDE (dBFS) 05489-046 05489-045 05489-044 FREQUENCY DNL ERROR (LSB) GAIN ERROR (%FSR) 05489-049 05489-048 05489-047 AD9445 0.4 1.0 0.8 0.3 0.6 0.2 0.4 0.1 0.2 0 0 –0.2 –0.1 –0.4 –0.2 –0.6 –0.3 –0.8 –0.4 –1.0 0 0 4096 8192 12288 16384 0 0 4096 8192 12288 16384 OUTPUT CODE OUTPUT CODE Figure 48. AD9445-125 DNL Error vs. Output Code, 125 MSPS, 10.3 MHz Figure 51. AD9445-125 INL Error vs. Output Code, 125 MSPS, 10.3 MHz 400 1.014 350 1.012 300 AVDD1 1.010 250 200 1.008 AVDD2 150 1.006 100 DRVDD 1.004 50 1.002 0 0 20 40 60 80 100 120 140 160 –40 –20 0 20 40 60 80 SAMPLE RATE (MSPS) TEMPERATURE (°C) Figure 52. AD9445-105 Power Supply Current vs. Sample Rate Figure 49. AD9445-125 VREF vs. Temperature 10.3 MHz @ −1 dBFS 78 0.5 0.4 77 170.3MHz SNR dB 0.3 76 0.2 0.1 75 225.3MHz SNR dB 0 74 –0.1 300.3MHz SNR dB –0.2 73 –0.3 72 –0.4 71 –0.5 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 0 0 4096 8192 12288 16384 ANALOG INPUT RANGE (V p-p) OUTPUT CODE Figure 50. AD9445-105 INL Error vs. Output Code, 105 MSPS, 10.3 MHz Figure 53. AD9445-125 SNR vs. Analog Input Range, 125 MSPS/170.3 MHz, 225.3 MHz, 300.3 MHz Rev. 0 | Page 22 of 40 INL ERROR (LSB) VREF DNL ERROR (LSB) 05489-052 05489-051 05489-050 (dB) I (mA) INL ERROR (LSB) SUPPLY 05489-067 05489-066 05489-053 AD9445 78 95 77 170.3MHz SFDR dBc 90 76 170.3MHz SFDR dBc 85 75 225.3MHz SFDR dBc 225.3MHz SFDR dBc 74 80 300.3MHz SFDR dBc 73 75 72 300.3MHz SFDR dBc 71 70 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 ANALOG INPUT RANGE (V p-p) ANALOG INPUT RANGE (V p-p) Figure 54. AD9445-105 SNR vs. Analog Input Range, Figure 57. AD9445-105 SFDR vs. Analog Input Range, 105 MSPS/170.3 MHz, 225.3 MHz, 300.3 MHz 105 MSPS/170.3 MHz, 225.3 MHz, 300.3 MHz 400 81 350 80 300 79 AVDD1 250 105M SNR dBFS 78 200 AVDD2 77 150 125M SNR dBFS 76 100 DRVDD 75 50 0 74 0 20 40 60 80 100 120 140 160 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 SAMPLE RATE (MSPS) ANALOG INPUT RANGE (V p-p) Figure 55. AD9445-125 Power Supply Current vs. Sample Rate Figure 58. SNR vs. Analog Input Range, 2.3 MHz @ −30 dBFS 10.3 MHz @ −1 dBFS 95 90 170.3MHz SFDR dBc 85 80 225.3MHz SFDR dBc 75 300.3MHz SFDR dBc 70 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 ANALOG INPUT RANGE (V p-p) Figure 56. AD9445-125 SFDR vs. Analog Input Range, 125 MSPS/170.3 MHz, 225.3 MHz, 300.3 MHz Rev. 0 | Page 23 of 40 (dB) I (mA) (dB) SUPPLY 05489-070 05489-069 05489-068 (dB) (dB) 05489-039 05489-071 AD9445 THEORY OF OPERATION connected to AGND). Because of this trim and the maximum ac The AD9445 architecture is optimized for high speed and ease performance provided by the 2.0 V p-p analog input range, there of use. The analog inputs drive an integrated, high bandwidth is little benefit to using analog input ranges <2 V p-p. Users are track-and-hold circuit that samples the signal prior to quantization cautioned that the differential nonlinearity of the ADC varies by the 14-bit pipeline ADC core. The device includes an on-board with the reference voltage. Configurations that use <2.0 V p-p reference and input logic that accepts TTL, CMOS, or LVPECL may exhibit missing codes and, therefore, degraded noise and levels. The digital output logic levels are user selectable as standard distortion performance. 3 V CMOS or LVDS (ANSI-644 compatible) via the OUTPUT MODE pin. VIN+ ANALOG INPUT AND REFERENCE OVERVIEW VIN– REFT A stable and accurate 0.5 V band gap voltage reference is built 0.1μF into the AD9445. The input range can be adjusted by varying ADC + 0.1μF 10μF CORE the reference voltage applied to the AD9445, using either the REFB internal reference or an externally applied reference voltage. 0.1μF The input span of the ADC tracks reference voltage changes VREF linearly. + 10μF 0.1μF SELECT Internal Reference Connection LOGIC SENSE A comparator within the AD9445 detects the potential at the SENSE pin and configures the reference into three possible states, 0.5V which are summarized in Table 9. If SENSE is grounded, the reference amplifier switch is connected to the internal resistor AD9445 divider (see Figure 59), setting VREF to ~1.0 V. Connecting the SENSE pin to VREF switches the reference amplifier output to Figure 59. Internal Reference Configuration the SENSE pin, completing the loop and providing a ~1.0 V reference output. If a resistor divider is connected as shown in VIN+ Figure 60, the switch again sets to the SENSE pin. This puts the VIN– reference amplifier in a noninverting mode with the VREF REFT output defined as 0.1μF ADC + 0.1μF 10μF CORE R2 REFB ⎛ ⎞ VREF= 0.5 V× 1+ ⎜ ⎟ ⎝ R1⎠ 0.1μF VREF + 10μF 0.1μF In all reference configurations, REFT and REFB drive the SELECT R2 LOGIC analog-to-digital conversion core and establish its input span. SENSE The input range of the ADC always equals twice the voltage at the reference pin for either an internal or an external reference. R1 0.5V Internal Reference Trim AD9445 The internal reference voltage is trimmed during the production test to adjust the gain (analog input voltage range) of the AD9445. Figure 60. Programmable Reference Configuration Therefore, there is little advantage to the user supplying an external voltage reference to the AD9445. The gain trim is performed with the AD9445 input range set to 2.0 V p-p nominal (SENSE Table 9. Reference Configuration Summary Selected Mode SENSE Voltage Resulting VREF (V) Resulting Differential Span (V p-p) External Reference AVDD1 N/A 2 × external reference Programmable Reference 0.2 V to VREF 2 × VREF R2 ⎛ ⎞ (See Figure 60) 0.5× 1+ ⎜ ⎟ R1 ⎝ ⎠ Internal Fixed Reference AGND to 0.2 V 1.0 2.0 Rev. 0 | Page 24 of 40 05489-054 05489-055 AD9445 External Reference Operation The AD9445’s internal reference is trimmed to enhance the gain accuracy of the ADC. An external reference may be more stable over temperature, but the gain of the ADC is not likely to improve. VIN+ Figure 49 shows the typical drift characteristics of the internal reference in both 1 V and 0.5 V modes. 1V p-p 3.5V When the SENSE pin is tied to AVDD, the internal reference is VIN– disabled, allowing the use of an external reference. An internal reference buffer loads the external reference with an equivalent DIGITAL OUT = ALL 1s DIGITAL OUT = ALL 0s 7 kΩ load. The internal buffer still generates the positive and negative full-scale references, REFT and REFB, for the ADC core. The input span is always twice the value of the reference Figure 61. Differential Analog Input Range for VREF = 1.0 V voltage; therefore, the external reference must be limited to a Therefore, the analog source driving the AD9445 should be ac- maximum of 1.6 V. coupled to the input pins. The recommended method for driving Analog Inputs the analog input of the AD9445 is to use an RF transformer to As with most new high speed, high dynamic range ADCs, the convert single-ended signals to differential (see Figure 62). analog input to the AD9445 is differential. Differential inputs Series resistors between the output of the transformer and the improve on-chip performance because signals are processed AD9445 analog inputs help isolate the analog input source from through attenuation and gain stages. Most of the improvement switching transients caused by the internal sample-and-hold is a result of differential analog stages having high rejection of circuit. The series resistors, along with the 1 kΩ resisters connected even-order harmonics. There are also benefits at the PCB level. to the internal 3.5 V bias, must be considered in impedance First, differential inputs have high common-mode rejection of matching the transformer input. For example, if R is set to T stray signals, such as ground and power noise. Second, they 51 Ω, R is set to 33 Ω, and there is a 1:1 impedance ratio trans- S provide good rejection of common-mode signals, such as local former, the input will match a 50 Ω source with a full-scale drive oscillator feedthrough. The specified noise and distortion of the of 10.0 dBm. The 50 Ω impedance matching can also be incor- AD9445 cannot be realized with a single-ended analog input, so porated on the secondary side of the transformer, as shown in such configurations are discouraged. Contact sales for the evaluation board schematic (see Figure 67). recommendations of other 14-bit ADCs that support single- R ADT1–1WT S ANALOG ended analog input configurations. VIN+ INPUT R T SIGNAL AD9445 R S With the 1 V reference, which is the nominal value (see the VIN– 0.1μF Internal Reference Trim section), the differential input range of the AD9445 analog input is nominally 2.0 V p-p or 1.0 V p-p on Figure 62. Transformer-Coupled Analog Input Circuit each input (VIN+ or VIN−). High IF Applications The AD9445 analog input voltage range is offset from ground In applications where the analog input frequency range is by 3.5 V. Each analog input connects through a 1 kΩ resistor to >100 MHz, the phase and amplitude matching at the analog the 3.5 V bias voltage and to the input of a differential buffer. inputs becomes critical to optimize performance of the ADC. The internal bias network on the input properly biases the The circuit in Figure 63 can be used to optimize the matching of buffer for maximum linearity and range (see the Equivalent these parameters. This configuration uses a double balun config- Circuits section). uration that has low parasitics, high bandwidth, and parasitic cancellation. ETC1–1–13 ETC1–1–13 33Ω 25Ω VIN+ CT AD9445 0.1μF 0.1μF 33Ω 25Ω VIN– 50Ω SOURCE Figure 63. Double Balun-Coupled Analog Input Circuit Rev. 0 | Page 25 of 40 05489-057 05489-058 05489-056 AD9445 Schottky diodes across the secondary of the transformer limit CLOCK INPUT CONSIDERATIONS clock excursions into the AD9445 to approximately 0.8 V p-p Any high speed ADC is extremely sensitive to the quality of the differential. This helps prevent the large voltage swings of the sampling clock provided by the user. A track-and-hold circuit is clock from feeding through to other portions of the AD9445 essentially a mixer, and any noise, distortion, or timing jitter on and limits the noise presented to the sample clock inputs. the clock is combined with the desired signal at the analog-to- digital output. For that reason, considerable care was taken in If a low jitter clock is available, it may help to band-pass filter the design of the clock inputs of the AD9445, and the user is the clock reference before driving the ADC clock inputs. advised to give careful thought to the clock source. Another option is to ac couple a differential ECL/PECL signal to the encode input pins, as shown in Figure 65. Typical high speed ADCs use both clock edges to generate a ADT1–1WT CLOCK variety of internal timing signals and, as a result, may be CLK+ SOURCE 0.1μF sensitive to the clock duty cycle. Commonly a 5% tolerance is AD9445 required on the clock duty cycle to maintain dynamic CLK– HSMS2812 performance characteristics. The AD9445 contains a clock duty DIODES cycle stabilizer (DCS) that retimes the nonsampling edge, Figure 64. Crystal Clock Oscillator, Differential Encode providing an internal clock signal with a nominal 50% duty cycle. Noise and distortion performance are nearly flat for a VT 30% to 70% duty cycle with the DCS enabled. The DCS circuit 0.1μF locks to the rising edge of CLK+ and optimizes timing ENCODE internally. This allows for a wide range of input duty cycles at ECL/ AD9445 PECL the input without degrading performance. Jitter in the rising 0.1μF ENCODE edge of the input is still of paramount concern and is not reduced by the internal stabilization circuit. The duty cycle VT control loop does not function for clock rates of less than Figure 65. Differential ECL for Encode 30 MHz nominally. The loop is associated with a time constant that should be considered in applications where the clock rate Jitter Considerations can change dynamically, requiring a wait time of 1.5 μs to 5 μs High speed, high resolution ADCs are sensitive to the quality after a dynamic clock frequency increase or decrease before the of the clock input. The degradation in SNR at a given input DCS loop is relocked to the input signal. During the time that frequency (fINPUT) and rms amplitude due only to aperture jitter the loop is not locked, the DCS loop is bypassed, and the internal (tJ) can be calculated using the following equation: device timing is dependent on the duty cycle of the input clock signal. In such an application, it may be appropriate to disable SNR = 20 log[2πfINPUT × tJ] the duty cycle stabilizer. In all other applications, enabling the DCS circuit is recommended to maximize ac performance. In the equation, the rms aperture jitter represents the root- mean-square of all jitter sources, which includes the clock The DCS circuit is controlled by the DCS MODE pin; a CMOS input, analog input signal, and ADC aperture jitter logic low (AGND) on DCS MODE enables the duty cycle specification. IF undersampling applications are particularly stabilizer, and logic high (AVDD1 = 3.3 V) disables the sensitive to jitter, see Figure 66. controller. The clock input should be treated as an analog signal in cases The AD9445 input sample clock signal must be a high quality, where aperture jitter may affect the dynamic range of the extremely low phase noise source to prevent degradation of AD9445. Power supplies for clock drivers should be separated performance. Maintaining 14-bit accuracy places a premium on from the ADC output driver supplies to avoid modulating the the encode clock phase noise. SNR performance can easily clock signal with digital noise. Low jitter crystal-controlled degrade by 3 dB to 4 dB with 70 MHz analog input signals oscillators make the best clock sources. If the clock is generated when using a high jitter clock source. (See the AN-501 from another type of source (by gating, dividing, or another Application Note, Aperture Uncertainty and ADC System method), it should be synchronized by the original clock during Performance.) For optimum performance, the AD9445 must be the last step. clocked differentially. The sample clock inputs are internally biased to ~2.2 V, and the input signal is usually ac-coupled into the CLK+ and CLK− pins via a transformer or capacitors. Figure 64 shows one preferred method for clocking the AD9445. The clock source (low jitter) is converted from single- ended to differential using an RF transformer. The back-to-back Rev. 0 | Page 26 of 40 05489-060 05489-059 AD9445 75 resistor is placed at Pin 5 (LVDS_BIAS) to ground. Dynamic 0.2ps performance, including both SFDR and SNR, is maximized 70 when the AD9445 is used in LVDS mode; designers are 65 encouraged to take advantage of this mode. The AD9445 0.5ps outputs include complimentary LVDS outputs for each data bit 60 1.0ps (Dx+/Dx−), the overrange output (OR+/OR−), and the output 1.5ps data clock output (DCO+/DCO−). The RSET resistor current is 55 2.0ps multiplied on-chip, setting the output current at each output 2.5ps 50 equal to a nominal 3.5 mA (11 × I ). A 100 Ω differential R SET 3.0ps termination resistor placed at the LVDS receiver inputs results 45 in a nominal 350 mV swing at the receiver. LVDS mode facilitates interfacing with LVDS receivers in custom ASICs and 40 1 10 100 1000 FPGAs that have LVDS capability for superior switching INPUT FREQUENCY (MHz) performance in noisy environments. Single point-to-point net Figure 66. SNR vs. Input Frequency and Jitter topologies are recommended, with a 100 Ω termination resistor placed as close to the receiver as possible. It is recommended to POWER CONSIDERATIONS keep the trace length less than 2 inches and to keep differential Care should be taken when selecting a power source. The use of output trace lengths as equal as possible. linear dc supplies is highly recommended. Switching supplies tend to have radiated components that may be received by the CMOS Mode AD9445. Each of the power supply pins should be decoupled as In applications that can tolerate a slight degradation in dynamic closely to the package as possible using 0.1 μF chip capacitors. performance, the AD9445 output drivers can be configured to interface with 2.5 V or 3.3 V logic families by matching The AD9445 has separate digital and analog power supply pins. DRVDD to the digital supply of the interfaced logic. CMOS The analog supplies are denoted AVDD1 (3.3 V) and AVDD2 outputs are available when OUTPUT MODE is CMOS logic (5 V), and the digital supply pins are denoted DRVDD. Although low (or AGND for convenience). In this mode, the output data the AVDD1 and DRVDD supplies can be tied together, best bits, Dx, are single-ended CMOS, as is the overrange output, performance is achieved when the supplies are separate. This is OR. The output clock is provided as a differential CMOS signal, because the fast digital output swings can couple switching DCO+/DCO−. Lower supply voltages are recommended to current back into the analog supplies. Note that both AVDD1 avoid coupling switching transients back to the sensitive analog and AVDD2 must be held within 5% of the specified voltage. sections of the ADC. The capacitive load to the CMOS outputs The DRVDD supply of the AD9445 is a dedicated supply for the should be minimized, and each output should be connected to a digital outputs in either LVDS or CMOS output mode. When in single gate through a series resistor (220 Ω) to minimize LVDS mode, the DRVDD should be set to 3.3 V. In CMOS switching transients caused by the capacitive loading. mode, the DRVDD supply can be connected from 2.5 V to TIMING 3.6 V for compatibility with the receiving logic. The AD9445 provides latched data outputs with a pipeline delay DIGITAL OUTPUTS of 13 clock cycles. Data outputs are available one propagation LVDS Mode delay (tPD) after the rising edge of CLK+. Refer to Figure 2 and Figure 3 for detailed timing diagrams. The off-chip drivers on the chip can be configured to provide LVDS-compatible output levels via Pin 3 (OUTPUT MODE). LVDS outputs are available when OUTPUT MODE is CMOS logic high (or AVDD1 for convenience) and a 3.74 kΩ R SET Rev. 0 | Page 27 of 40 SNR (dBc) 05489-061 AD9445 RF ENABLE OPERATIONAL MODE SELECTION The RF ENABLE pin is a CMOS-compatible control pin that Data Format Select optimizes the configuration of the AD9445 analog front end. The data format select (DFS) pin of the AD9445 determines The crossover analog input frequency for determining the the coding format of the output data. This pin is 3.3 V CMOS- RF ENABLE connection differs for the 105 MSPS and 125 MSPS compatible, with logic high (or AVDD1, 3.3 V) selecting twos speed grades. For the 125 MSPS speed grade, connecting the complement and DFS logic low (AGND) selecting offset binary RF ENABLE to AGND optimizes SFDR performance for appli- format. Table 10 summarizes the output coding. cations with analog input frequencies <210 MHz. For applications with analog inputs >210 MHz, this pin should be connected to Output Mode Select AVDD1 for optimum SFDR performance. Connecting this pin to The OUPUT MODE pin controls the logic compatibility, as well AVDD1 reconfigures the ADC, thereby improving high IF and RF as the pinout of the digital outputs. This pin is a CMOS-compatible spurious performance. Operating in this mode increases power dis- input. With OUTPUT MODE = 0 (AGND), the AD9445 outputs sipation from AVDD2 by 150 mW to 200 mW. For the 105 MSPS are CMOS compatible, and the pin assignment for the device is speed grade, connecting RF ENABLE to AGND optimizes SFDR as defined in Table 8. With OUTPUT MODE = 1 (AVDD1, 3.3 performance for applications with analog input frequencies V), the AD9445 outputs are LVDS compatible, and the pin <230 MHz. For applications with analog inputs >230 MHz, this assignment for the device is as defined in Table 7. pin should be connected to AVDD1 to optimize performance. Duty Cycle Stabilizer The DCS circuit is controlled by the DCS MODE pin; a CMOS logic low (AGND) on DCS MODE enables the DCS, and logic high (AVDD1, 3.3 V) disables the controller. Table 10. Digital Output Coding VIN+ − VIN− VIN+ − VIN− Digital Output Digital Output Code Input Span = 3.2 V p-p (V) Input Span = 2 V p-p (V) Offset Binary (D13••••••D0) Twos Complement (D13••••••D0) 16,383 +1.600 +1.000 11 1111 1111 1111 01 1111 1111 1111 8192 0 0 10 0000 0000 0000 00 0000 0000 0000 8191 −0.000195 −0.000122 01 1111 1111 1111 11 1111 1111 1111 0 −1.60 −1.00 00 0000 0000 0000 10 0000 0000 0000 Rev. 0 | Page 28 of 40 AD9445 EVALUATION BOARD Evaluation boards are offered to configure the AD9445 in The LVDS mode evaluation boards include an LVDS-to-CMOS either CMOS or LVDS mode only. This design represents a translator, making them compatible with the high speed ADC recommended configuration for using the device over a wide FIFO evaluation kit (HSC-ADC-EVALA-SC). The kit includes a range of sampling rates and analog input frequencies. These high speed data capture board that provides a hardware solution evaluation boards provide all the support circuitry required to for capturing up to 32 kB samples of high speed ADC output operate the ADC in its various modes and configurations. data in a FIFO memory chip (user upgradeable to 256 kB Complete schematics are shown in Figure 67 through Figure 70. samples). Software is provided to enable the user to download Gerber files are available from engineering applications demon- the captured data to a PC via the USB port. This software also strating the proper routing and grounding techniques that should includes a behavioral model of the AD9445 and many other be applied at the system level. high speed ADCs. It is critical that signal sources with very low phase noise Behavioral modeling of the AD9445 is also available at (<60 fsec rms jitter) be used to realize the ultimate performance www.analog.com/ADIsimADC. The ADIsimADC™ software of the converter. Proper filtering of the input signal to remove supports virtual ADC evaluation using ADI proprietary behavioral harmonics and lower the integrated noise at the input is also modeling technology. This allows rapid comparison between necessary to achieve the specified noise performance. the AD9445 and other high speed ADCs with or without hardware evaluation boards. The evaluation boards are shipped with a 115 V ac to 6 V dc power supply. The evaluation boards include low dropout The user can choose to remove the translator and terminations regulators to generate the various dc supplies required by the to access the LVDS outputs directly. AD9445 and its support circuitry. Separate power supplies are provided to isolate the DUT from the support circuitry. Each input configuration can be selected by proper connection of various jumpers (see Figure 67). Rev. 0 | Page 29 of 40 AD9445 1 XTALPWR P1 2 P2 EXTREF 3 P3 DRGND 4 P4 DRVDD 1 P1 GND 2 P2 VCC 3 P3 GND 4 P4 5V H4 76 50 MTHOLE6 D0_T DRVDD DRVDD D0_T 77 49 D0_C D11_C/D6_Y D11_C D0_C (LSB) H3 48 78 D11_T/D7_Y D11_T DRVDD DRVDD MTHOLE6 47 79 D12_C/D8_Y D12_C DRGND DRGND 46 80 D12_T AGND D12_T/D9_Y GND 45 81 H1 D13_C/D10_Y D13_C AVDD1 VCC 82 44 MTHOLE6 AVDD1 VCC D13_T/D11_Y D13_T GND 83 43 D14_C/D12_Y D14_C AVDD1 VCC H2 84 42 D14_T/D13_Y D14_T AGND GND MTHOLE6 85 41 D15_C/D14_Y D15_C ENCB DRGND ENCB 86 40 (MSB) D15_T/D15_Y D15_T ENC ENC 87 39 DRGND DRGND AGND GND 38 88 DRVDD DRVDD AVDD1 VCC 37 89 DOR_C OR_C AVDD2 5V 90 36 DOR_T/DOR_Y OR_T AVDD1 VCC 91 35 GND AGND AVDD2 5V 92 34 AVDD1 VCC AVDD1 VCC 93 33 VCC AVDD1 VCC AVDD1 94 32 VCC AVDD1 AVDD1 VCC 95 31 VCC AVDD1 AVDD2 30 96 VCC AVDD1 AVDD2 97 29 AVDD1 VCC AVDD2 98 28 GND AGND AVDD2 99 27 AGND AVDD2 100 26 AGND AVDD2 5V EPAD 101 OPTIONAL C91 0.1μF ETC1-1-13 + PRI SEC Figure 67. AD9445 Evaluation Board Schematic Rev. 0 | Page 30 of 40 P22 P21 PTMICRO4 PTMICRO4 VCC E19 E66 GND E18 VCC E4 E6 GND E5 GND VCC E10 E1 GND E9 VCC E3 SCLK 75 1 E14 DRGND DCS MODE DRGND 2 74 R11 GND E2 GND DNC D10_T/D5_Y D10_T 1kΩ 3 73 VCC OUTPUT MODE D10_C/D4_Y D10_C 72 4 D9_T/D3_Y DFS D9_T 5 71 D9_C/D2_Y LVDSBIAS D9_C 6 70 GND VCC AVDD1 D8_T D8_T/D1_Y GND 7 69 E26 C86 SENSE D8_C D8_C/D0_Y VCC 0.1μF E25 8 68 VREF DCO DR E27 9 67 E41 DRB GND DCOB AGND R1 E24 10 66 R3 GND REFT D7_T D7_T DNP EXTREF 65 3.74kΩ 11 C3 D7_C GND REFB AD9445/AD9446 D7_C 0.1μF 12 64 U1 5V AVDD2 DRVDD DRVDD C51 C2 GND C40 13 63 R2 5V AVDD2 DRGND DRGND GND 0.1μF 10μF 0.1μF C39 DNP 62 14 C9 AVDD2 D6_T D6_T 5V 10μF 15 61 0.1μF 5V D6_C AVDD2 D6_C GND 16 60 D5_T 5V AVDD2 D5_T C98 17 59 5V AVDD2 D5_C D5_C DNP GND 18 58 AVDD1 VCC D4_T D4_T 19 57 VCC AVDD1 D4_C D4_C GND 20 56 T1 VCC AVDD1 D3_T D3_T R5 21 55 ETC1-1-13 D3_C GND AGND D3_C DNP 15 TOUT 22 54 VIN+ D2_T D2_T J4 GND L1 CT 23 53 R28 SMBMST 2 GND C7 VIN– D2_C D2_C 10nH GND 33Ω 52 24 C12 0.1μF AGND D1_T GND D1_T 34 TINB R4 25 51 C5 0.1μF D1_C 5V AVDD2 D1_C PRI SEC T2 36Ω 0.1μF 1 3 TOUTB ANALOG C13 R9 4 5 DNP DNP 2 E15 R6 36Ω T5 ADT1-1WT GND TOUT 1 6 GND GND 5 2 NC CT 3 4 R35 TINB TOUTB C8 33Ω 05489-062 PRI SEC 0.1μF AD9445 Figure 68. AD9445 Evaluation Board Schematic (Continued) Rev. 0 | Page 31 of 40 GND OPTIONAL ENCODE CIRCUITS ENCODE GND R7 VXTAL DNP CR2 TO MAKE LAYOUT AND PARASITIC R39 LOADING SYMMETRICAL + C1 C41 0Ω E31 5V 10μF 0.1μF ENC VXTAL J5 E30 SMBMST E20 XTALPWR + T3 C44 GND ADT1-1WT C36 10μF DNP DNP 1 6 J1 2 U6 NC 5 GND SMBMST ECLOSC 3 4 C42 0.1μF PRI SEC GND 8 C26 14 R8 VXTAL VCC OUT XTALINPUT ENCB 0.1μF 50Ω 1 7 GND VEE ~OUT GND L5 XTALINPUT FERRITE DRVDD DRVDDX L4 FERRITE VCC VCCX L3 L2 FERRITE DNP POWER OPTIONS 5V 5VX GND DRGND ADP3338 ADP3338 ADP3338 P4 U14 U7 U3 PJ-102A 5V 3.3V 3.3V 2 1 1 1 2 GND GND GND GND GND GND DRGND 3 2 2 2 4 4 4 OUT1 OUT1 OUT1 3 5VX VCCX DRVDDX 5VX OUT VCCX OUT DRVDDX OUT 1 3 3 3 VIN IN VIN IN VIN IN VIN 1 + C33 + C34 + C6 + C4 10μF 10μF 10μF 10μF + + + C89 C87 C88 10μF 10μF 10μF GND GND DRGND GND GND GND DRGND 05489-063 CR2 2 3 1 1 3 2 CR1 AD9445 BYPASS CAPACITORS VCC + C64 C43 C35 C32 C30 C28 C27 C90 C50 C60 C10 C61 C75 10μF 0.1μF 0.1μF 0.1μF 0.01μF 0.1μF 0.1μF 0.1μF 0.1μF 0.1μF 0.1μF 0.1μF 0.1μF GND VCC C11 C14 C17 C16 C15 C31 C38 C29 C19 XX XX XX XX XX XX XX XX XX GND DRVDD DRVDD + C65 C47 C23 C21 C20 C69 C70 C45 C49 10μF 0.1μF 0.1μF 0.1μF 0.1μF XX XX XX XX DRGND DRGND 5V EXTREF + + C56 C85 C53 C52 C58 C37 C48 C18 C55 10μF 0.1μF 0.1μF 0.1μF 0.01μF 0.1μF 0.1μF 0.1μF 10μF GND GND 5V C72 C73 C108 C109 C110 XX XX XX XX XX GND 5V C94 C95 C22 C59 C93 C96 C97 C84 C46 0.1μF 0.1μF 0.1μF 0.1μF 0.1μF 0.1μF 0.1μF 0.1μF 0.1μF GND Figure 69. AD9445 Evaluation Board Schematic (Continued) Rev. 0 | Page 32 of 40 05489-064 AD9445 Figure 70. AD9445 Evaluation Board Schematic (Continued) Rev. 0 | Page 33 of 40 U15 SN75LVDT390 1 16 DR 1A EN_1_2 DRVDD 2 15 DRB 1B 1Y DRO 3 14 R19 2A 2Y 4 13 0Ω 2B VCC DRVDD 5 12 3A GND DRGND R10 6 11 3B 3Y 0Ω 7 10 DOR_T/DOR_Y 4A 4Y ORO 8 9 DOR_C 4B EN_3_4 DRVDD U8 SN75LVDS386 1 64 D15_T/D15_Y A1A GND DRGND 2 63 RZ5 220 D15_C/D14_Y A1B VCC1 DRVDD RSO16ISO 40 39 3 62 40 39 DRGND P39 DRGND D14_T/D13_Y A2A VCC2 DRVDD DRGND P39 DRGND P40 P40 4 61 R1 D14_C/D12_Y 1 16 A2B GND1 DRGND 38 37 38 37 D15O DOR_T/DOR_Y P37 DOR_C 5 60 ORO P37 DRO P38 P38 D13_T/D11_Y A3A ENA DRVDD R2 6 59 2 15 36 35 36 35 D13_C/D10_Y D14O A3B A1Y D15_T/D15_Y P35 D15_C/D14_Y P35 GNDN P36 P36 7 58 R3 D12_T/D9_Y A4A A2Y 3 14 34 33 34 33 D13O 8 57 D14_T/D13_Y P33 D14_C/D12_Y P33 D15O P34 P34 D12_C/D8_Y A4B A3Y R4 9 56 4 13 32 31 32 31 D11_T/D7_Y B1A A4Y D12O D13_T/D11_Y P31 D13_C/D10_Y P31 D14O P32 P32 10 55 R5 D11_C/D6_Y B1B ENB DRVDD 5 12 30 29 30 29 11 54 D11O D12_T/D9_Y P29 D12_C/D8_Y D10_T/D5_Y P29 D13O P30 P30 B2A B1Y R6 12 53 6 11 D10_C/D4_Y 28 27 B2B B2Y 28 27 D10O D11_T/D7_Y P27 D11_C/D6_Y P27 D12O P28 13 52 P28 D9_T/D3_Y B3A B3Y R7 7 10 26 25 14 51 26 25 D9O D10_T/D5_Y P25 D10_C/D4_Y D9_C/D2_Y B3B B4Y P25 D11O P26 P26 15 50 R8 8 9 D8_T/D1_Y B4A GND2 DRGND 24 23 24 23 D8O D9_T/D3_Y P23 D9_C/D2_Y 16 49 P23 D10O P24 P24 D8_C/D0_Y B4B VCC3 DRVDD 17 48 22 21 22 21 D7_T C1A VCC4 DRVDD D8_T/D1_Y P21 D8_C/DO_Y P21 D9O P22 220 P22 18 47 D7_C C1B GND3 DRGND RSO16ISO 20 19 20 19 19 46 DR P19 DRB P19 D8O P20 P20 D6_T C2A C1Y R1 20 45 1 16 18 17 18 17 D6_C C2B C2Y D7O D7_T P17 P17 D7_C D7O P18 21 44 P18 D5_T C3A C3Y R2 2 15 15 15 16 22 43 16 D6O D6_T P15 P15 D6_C D5_C D6O P16 C3B C4Y P16 23 42 R3 3 14 13 D4_T C4A ENC DRVDD 13 14 14 D5O P13 P13 D5_T D5_C 24 41 D5O P14 P14 D4_C C4B D1Y R4 4 13 25 40 12 11 12 11 D4O P11 D3_T D2Y P11 D4_T D4_C D1A D4O P12 P12 26 39 R5 D3_C D1B D3Y 5 12 10 9 10 9 D3O P9 27 38 P9 D3_T D3_C D3O P10 P10 D2_T D2A D4Y R6 28 37 6 11 8 7 8 7 D2_C D2B END DRVDD D2O D2_T P8 P7 D2_C P8 P7 D2O 29 36 R7 D1_T D3A GND4 DRGND 7 10 6 5 6 5 30 35 D1O D1_T P6 P5 D1_C P6 P5 D1O D1_C D3B VCC5 DRVDD 34 R8 31 8 9 4 3 D0_T D4A VCC6 DRVDD 4 3 D0O D0_T P4 P3 D0_C P4 P3 D0O 32 33 D0_C D4B GND5 DRGND 2 1 RZ4 2 1 DRGND P2 P1 DRGND P2 P1 DRGND DRGND P6 P7 C40MS C40MS DRVDD C76 C82 C77 C78 0.1μF 0.1μF 0.1μF 0.1μF 05489-065 DRGND AD9445 Table 11. AD9445-125 Baseband Customer Evaluation Board Bill of Materials Item Qty. Reference Designator Description Package Value Manufacturer Mfg. Part No. 1 7 C4, C6, C33, C34, C87, Capacitor TAJD 10 μF Digi-Key Corporation 478-1699-2 C88, C89 2 44 C2, C3, C5, C7, C8, Capacitor 402 0.1 μF Digi-Key Corporation PCC2146CT-ND C9, C10, C11, C12, C15, C20, C21, C22, C23, C26, C27, C28, C32, C35, C38, C40, C42, C43, C46, C47, C48, C50, C52, C53, C59, C60, C76, C77, C78, C82, C84, C85, C86, C90, C91, C94, C95, C96, C97 3 2 C30, C58 Capacitor 201 0.01 μF Digi-Key Corporation 445-1796-1-ND 4 4 C39, C56, C64, C65 Capacitor TAJD 10 μF Digi-Key Corporation 478-1699-2 5 1 C51 Capacitor 805 10 μF Digi-Key Corporation 490-1717-1-ND 6 1 CR1 Diode SOT23M5 Digi-Key Corporation MA3X71600LCT-ND 7 1 CR2 Diode SOT23M5 Digi-Key Corporation MA3X71600LCT-ND 8 20 E1, E2, E3, E4, E5, E6, Header EHOLE Mouser Electronics 517-6111TG E9, E10, E14, E18, E19, E20, E24, E25, E26, E27, E30, E31, E36, E41 9 2 J1, J4 SMA SMA Digi-Key Corporation ARFX1231-ND 10 1 L1 Inductor 0603A 10 nH Coilcraft, Inc. 0603CS-10NXGBU 11 3 L3, L4, L5 EMIFIL® 1206MIL Mouser Electronics 81-BLM31P500S BLM31PG500SN1L 12 1 P4 PJ-002A PJ-002A Digi-Key Corporation CP-002A-ND 13 1 P7 Header C40MS Samtec, Inc. TSW-120-08-L-D-RA 14 1 R3 Resistor 402 3.74 kΩ Digi-Key Corporation P3.74KLCT-ND 15 1 R8 Resistor 402 50 Ω Digi-Key Corporation P49.9LCT-ND 16 4 R10, R19, R39, L2 Resistor 402 0 Ω Digi-Key Corporation P0.0JCT-ND 17 1 R11 BRES402 402 1 kΩ Digi-Key Corporation P1.0KLCT-ND 18 2 R28, R35 Resistor 402 33 Ω Digi-Key Corporation P33JCT-ND 19 2 RZ4, RZ5 Resistor array 16PIN 22 Ω Digi-Key Corporation 742C163220JCT-ND 20 2 T3, T5 Transformer ADT1-1WT Mini-Circuits ADT1-1WT 21 1 U1 AD9445BSVZ-125 SV-100-3 Analog Devices, Inc. AD9445BSVZ-125 22 1 U14 ADP3338-5 SOT-223HS Analog Devices, Inc. ADP3338-5 23 2 U3, U7 ADP3338-3.3 SOT-223HS Analog Devices, Inc. ADP3338-33 24 1 U8 SN75LVDT386 TSSOP64 Arrow Electronics, Inc. SN75LVDT386DGG 25 1 U15 SN75LVDT390 SOIC16PW Arrow Electronics, Inc. SN75LVDT390PW 26 2 R4, R6 Resistor 402 36 Ω Digi-Key Corporation P36JCT-ND 1 27 2 C1, C44, C55 Capacitor TAJD 10 μF Digi-Key Corporation 478-1699-2 28 23 C13, C14, C16, C17, CAP402 402 XX C18, C19, C29, C31, C36, C37, C41, C45, C49, C61, C69, C70, C72, C73, C75, C93, 1 C108, C109, C110 1 29 1 C98 Capacitor 805 10 μF Digi-Key Corporation 490-1717-1-ND 1 30 E15 Header EHOLE Mouser Electronics 517-6111TG 1 31 J5 SMA SMA Digi-Key Corporation ARFX1231-ND 1 32 P6 Header C40MS Samtec, Inc. TSW-120-08-L-D-RA 1 33 2 R1, R2 BRES402 402 XX 1 34 3 R5, R7, R9 BRES402 402 XX 1 35 1 U2 ECLOSC DIP4(14) Rev. 0 | Page 34 of 40 AD9445 Item Qty. Reference Designator Description Package Value Manufacturer Mfg. Part No. 1 36 4 H1, H2, H3, H4 MTHOLE6 MTHOLE6 1 37 2 T1, T2 Balun transformer SM-22 M/A-COM ETC1-1-13 1 38 2 P21, P22 Term strip PTMICRO4 Newark Electronics 1 Parts not populated. Table 12. AD9445-125 IF Customer Evaluation Board Bill of Materials Item Qty. Reference Designator Description Package Value Manufacturer MFG_PART_NO 1 7 C4, C6, C33, C34, C87, Capacitor TAJD 10 μF Digi-Key Corporation 478-1699-2 C88, C89 2 44 C2, C3, C5, C7, C8, Capacitor 402 0.1 μF Digi-Key Corporation PCC2146CT-ND C9, C10, C11, C12, C15, C20, C21, C22, C23, C26, C27, C28, C32, C35, C38, C40, C42, C43, C46, C47, C48, C50, C52, C53, C59, C60, C76, C77, C78, C82, C84, C85, C86, C90, C91, C94, C95, C96, C97 3 2 C30, C58 Capacitor 201 0.01 μF Digi-Key Corporation 445-1796-1-ND 4 4 C39, C56, C64, C65 Capacitor TAJD 10 μF Digi-Key Corporation 478-1699-2 5 1 C51 Capacitor 805 10 μF Digi-Key Corporation 490-1717-1-ND 6 1 CR1 Diode SOT23M5 Digi-Key Corporation MA3X71600LCT-ND 7 1 CR2 Diode SOT23M5 Digi-Key Corporation MA3X71600LCT-ND 8 20 E1, E2, E3, E4, E5, E6, Header EHOLE Mouser Electronics 517-6111TG E9, E10, E14, E18, E19, E20, E24, E25, E26, E27, E30, E31, E36, E41 9 2 J1, J4 SMA SMA Digi-Key Corporation ARFX1231-ND 10 1 L1 Inductor 0603A 10 nH Coilcraft, Inc. 0603CS-10NXGBU 11 3 L3, L4, L5 EMIFIL® BLM31PG500SN1L 1206MIL Mouser Electronics 81-BLM31P500S 12 1 P4 PJ-002A PJ-002A Digi-Key Corporation CP-002A-ND 13 1 P7 Header C40MS Samtec, Inc. TSW-120-08-L-D-RA 14 1 R3 Resistor 402 3.74 kΩ Digi-Key Corporation P3.74KLCT-ND 15 1 R8 Resistor 402 50 Ω Digi-Key Corporation P49.9LCT-ND 16 4 R10, R19, R39, L2 Resistor 402 0 Ω Digi-Key Corporation P0.0JCT-ND 17 1 R11 BRES402 402 1 kΩ Digi-Key Corporation P1.0KLCT-ND 18 2 R28, R35 Resistor 402 33 Ω Digi-Key Corporation P33JCT-ND 19 2 RZ4, RZ5 Resistor array 16PIN 22 Ω Digi-Key Corporation 742C163220JCT-ND 20 1 U1 AD9445BSVZ-125 SV-100-3 Analog Devices, Inc. AD9445BSVZ-125 21 1 U14 ADP3338-5 SOT- Analog Devices, Inc. ADP3338-5 223HS 22 2 U3, U7 ADP3338-3.3 SOT-223HS Analog Devices, Inc. ADP3338-3.3 23 1 U8 SN75LVDT386 TSSOP64 Arrow Electronics, Inc. SN75LVDT386DGG 24 1 U15 SN75LVDT390 SOIC16PW Arrow Electronics, Inc. SN75LVDT390PW 25 2 T1, T2 Balun transformer SM-22 M/A-COM ETC-1-1-13 26 1 R5 Resistor 402 36 Ω Digi-Key Corporation P49.9LCT-ND 27 1 T3 Transformer ADT1-1WT Mini-Circuits ADT1-1WT 1 28 2 C1, C44, C55 Capacitor TAJD 10 μF Digi-Key Corporation 478-1699-2 Rev. 0 | Page 35 of 40 AD9445 Item Qty. Reference Designator Description Package Value Manufacturer MFG_PART_NO 29 23 C13, C14, C16, C17, CAP402 402 XX C18, C19, C29, C31, C36, C37, C41, C45, C49, C61, C69, C70, C72, C73, C75, C93, 1 C108, C109, C110 1 30 1 C98 Capacitor 805 10 μF Digi-Key Corporation 409-1717-1-ND 1 31 E15 Header EHOLE Mouser Electronics 517-6111TG 1 32 J5 SMA SMA Digi-Key Corporation ARFX1231-ND 1 33 P6 Header C40MS Samtec, Inc. TSW-120-08-L-D-RA 1 34 2 R1, R2 BRES402 402 XX 1 35 3 R5, R7, R9 BRES402 402 XX 1 36 1 U2 ECLOSC DIP4(14) 1 37 4 H1, H2, H3, H4 MTHOLE6 MTHOLE6 1 38 2 R4, R6 Resistor 402 36 Digi-Key Corporation P36JCT-ND 1 39 1 T5 Transformer ADT1-1WT Mini-Circuits ADT1-1WT 1 40 2 P21, P22 Term strip PTMICRO4 Newark Electronics 1 Parts not populated. Rev. 0 | Page 36 of 40 AD9445 OUTLINE DIMENSIONS 16.00 BSC SQ 1.20 0.75 MAX 0.60 14.00 BSC SQ 0.45 100 76 76 100 1 75 75 1 PIN 1 EXPOSED 9.50 SQ TOP VIEW PAD (PINS DOWN) 0° MIN 1.05 0.20 BOTTOM VIEW 1.00 (PINS UP) 0.09 50 51 25 25 0.95 7° 26 49 50 26 3.5° 0.50 BSC VIEW A 0.27 0.15 0° SEATING LEAD PITCH 0.22 0.05 0.08 MAX PLANE COPLANARITY 0.17 VIEW A ROTATED 90° CCW COMPLIANT TO JEDEC STANDARDS MS-026-AED-HD NOTES 1. CENTER FIGURES ARE TYPICAL UNLESS OTHERWISE NOTED. 2. THE PACKAGE HAS A CONDUCTIVE HEAT SLUG TO HELP DISSIPATE HEAT AND ENSURE RELIABLE OPERATION OF THE DEVICE OVER THE FULL INDUSTRIAL TEMPERATURE RANGE. THE SLUG IS EXPOSED ON THE BOTTOM OF THE PACKAGE AND ELECTRICALLY CONNECTED TO CHIP GROUND. IT IS RECOMMENDED THAT NO PCB SIGNAL TRACES OR VIAS BE LOCATED UNDER THE PACKAGE THAT COULD COME IN CONTACT WITH THE CONDUCTIVE SLUG. ATTACHING THE SLUG TO A GROUND PLANE WILL REDUCE THE JUNCTION TEMPERATURE OF THE DEVICE WHICH MAY BE BENEFICIAL IN HIGH TEMPERATURE ENVIRONMENTS. Figure 71. 100-Lead Thin Quad Flat Package, Exposed Pad [TQFP_EP] (SV-100-3) Dimensions shown in millimeters ORDERING GUIDE Model Temperature Range Package Description Package Option 1 AD9445BSVZ-125 –40°C to +85°C 100-Lead TQFP_EP SV-100-3 1 AD9445BSVZ-105 –40°C to +85°C 100-Lead TQFP_EP SV-100-3 AD9445-IF-LVDS/PCB AD9445-125 IF (>100 MHz) LVDS Mode Evaluation Board AD9445-BB-LVDS/PCB AD9445-125 Baseband (<100 MHz) LVDS Mode Evaluation Board 1 Z = Pb-free part. Rev. 0 | Page 37 of 40 AD9445 NOTES Rev. 0 | Page 38 of 40 AD9445 NOTES Rev. 0 | Page 39 of 40 AD9445 NOTES © 2005 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D05489–0–10/05(0) Rev. 0 | Page 40 of 40
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the AD9445 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Manufacturers


What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods