AMPRO LB3-P5V
Specifications
BIOS
Award ROM-BIOS with Ampro embedded-PC enhancements
Board Type
EBX (5.25 in)
Config EEPROM
512 bits available for OEM use
Counter Timer
3 programmable counter/timers (8254-equivalent)
CPU
Intel Pentium II “Tillamook” processor, 266MHz
DMA Interval
15 interrupt channels (8259-equivalent); 7 DMA channels (8237-equivalent)
Environmental
0° to 70° C standard temperature, –55° C to +85° C storage temperature; –40° to +85° C extended operating temperature available by special order; 5% to 95% relative humidity, non-condensing; Weight: 11.6 oz. (329 gm), no DRAM installed
Ethernet Controller
Intel 82559ER 10/100Mbps Ethernet controller; Complies with IEEE-802.3 (ANSI 8802-3) MII; 32-bit PCI host for fast operation up to 33MHz PCI clock frequency
Ethernet Data Rate
Automatic arbitration for 10/100 Mbits/sec
Ethernet Interface Options
10/100Base-T (twisted pair), via on-board RJ-45 connector
Ethernet Topology
Ethernet bus, using CSMA/CD
Fast IDE
PCI Extended IDE/UltraDMA drive controller, Supports up to two hard disk drives and one CompactFlash Socket; Supports high-speed PIO modes with fast ATA-compatible interface; Type II CompactFlash socket; Ampro BIOS supports large capacity disk drives through Logical Block Addressing (LBA)
Flat Panel Support
Supports true color at 800 x 600 VGA resolution; Supports interlaced/non-interlaced displays in up to 1280x1024 resolution modes; GUI accelerator for enhanced graphic function performance; Standard model supports 3.3V flat panels; support for 5V flat panels with external adapter.
Floppy
Supports 1 or 2 drives
Keyboard/Mouse
Standard PC/AT keyboard port and PS/2 mouse ports; Standard PC speaker port with .1 watt output drive
Memory
DIMM module, utilizing 3.3V EDO or SDRAM memory chips; Supports from 16MB to 256MB total RAM; 512KB level-two cache, synchronous burst
Onboard Display Ram
2.5 MB embedded SDRAM; Supports CRT, LCD, and video displays
Parallel
IEEE-1284 (EPP/ECP) compliant, bi-directional
PCI Bus CONTROLLER
Uses state-of-the-art Trident Cyber9525DVD Multimedia Accelerator
Power
Power requirements (typical, with 16MB DRAM, measured at 5V +/- 5%)
Powerfail NMI
Triggers when +5V power drops below +4.7V
Real Time Clock
Battery-backed real-time clock and CMOS RAM
Serial
Two 16-byte FIFO-buffered serial ports (16550-equivalent); Both ports are RS-232 or RS-422/485 for half or full-duplex configuratio
Size
5.75 x 8.0 in. (146 x 203 mm)
Watchdog Timer
Utilizes real time clock alarm function; Timeout triggers 5MI or hardware reset
Features
- 100BaseT LAN Interface
- 512KB Synchronous-Burst secondary cache
- 64-Bit Wide 3.3V SDRAM - Up to 256MB
- Compact Flash Solid-State IDE Drive Support
- Dual PCI-Bus EIDE/ULTRA DMA Drive Interfaces
- Embedded-PC BIOS in Flash EPROM
- Flat-Panel/CRT Display I/O
- Floppy Controller
- Multi-Mode IEEE-1284 Parallel Port
- PC/104 Plus Connections
- Standard Keyboard & Speaker Interface
- Tillamook CPU
- Two RS-232/485, TTL Serial Ports
- Two USB Ports, IrDA Port, PS/2 Mouse Connection
- VGA Monitor Interface
Datasheet
Extracted Text
LB3-P5v ™ Little Board /P5v • Third generation Pentum-based, high integration single board system 64-BIT WIDE 3.3V SDRAM - UP TO 256M BYTES ETHERNET 100BASET LAN INTERFACE FLAT-PANEL/CRT DISPLAY I/O TWO RS-232/485, TTL SERIAL PORTS DUAL PCI-BUS EIDE/ULTRA DMA DRIVE INTERFACE VGA MONITOR INTERFACE FLOPPY CONTROLLER 512KB SYNCHRONOUS-BURST SECONDARY CACHE MULTI-MODE IEEE-1284 PARALLEL PORT “TILLAMOOK” CPU STANDARD KEYBOARD AND SPEAKER INTERFACE TWO UNIVERSAL SERIAL BUS (USB) PORTS INFRARED (IRDA) PORT/PS2 MOUSE PC/104-PLUS CONNECTORS EMBEDDED-PC BIOS IN FLASH EPROM OMPACT FLASH SOLID-STATE IDE DRIVE SUPPORT C The highly integrated Little Board/P5v EBX-compatible compatibility with all popular PC video standards single board computer features a powerful, (VGA, Super VGA, and VESA). All standard low-power 266 MHz Mobile Pentium processor, resolutions up to 1280 x 1024 pixels and up to 16.7 advanced networking and high performance million colors are supported. 2.5M bytes of SDRAM graphics. The Little Board/P5v is ideal for high video memory are standard. volume, ruggedized, cost-conscious embedded 100 MB/s ETHERNET LAN INTERFACE designs that need to optimize cost vs. performance The Ethernet subsystem is based on the Intel 82559ER vs. power/heat requirements. 10/100 PCI Ethernet Controller. It fully supports IEEE The Little Board/P5v contains all the component 802.3 Ethernet standards—10BaseT and 100BaseT. For subsystems of a PCI motherboard plus the equivalent maximum performance, the Ethernet controller uses of up to five expansion boards. Supporting up to the PCI bus for system-side data transfers and includes 256MB DRAM, the Little Board/P5v also provides on-board programmable DMA, full-duplex support and 512KB synchronous-burst secondary cache to boost Auto-negotiable support. performance, thermal monitoring and advanced An extensive set of PC BIOS enhancements ensures power management functions. robust operation in unpredictable real-world PCI FLAT-PANEL/CRT DISPLAY environments. System operation requires a single +5 CONTROLLER Volt power source (and 3.3 Volts for low-voltage PCI A powerful and flexible PCI video display controller expansion cards, if required) and offers “green PC” (Trident Cyber9525DVD Multimedia Accelerator) power-saving modes under support of Advanced supports both CRTs and flat panels (plasma, Power Management (APM) BIOS functions. electroluminescent and LCD), and offers full software Ampro Computers, Inc. • 4757 Hellyer Ave., San Jose, CA 95138 • Tel. (408)360-0200 • Fax (408)360-0222 • sales@ampro.com SPECIFICATIONS LB3-P5v PC FUNCTIONS CPU • Intel Pentium II “Tillamook” processor, 266MHz MEMORY • DIMM module, utilizing 3.3V EDO or SDRAM memory chips • Supports from 16MB to 256MB total RAM • 512KB level-two cache, synchronous burst DMA INTERNAL • 15 interrupt channels (8259-equivalent) • 7 DMA channels (8237-equivalent) COUNTER TIMER • 3 programmable counter/timers (8254-equivalent) KEYBOARD/MOUSE • Standard PC/AT keyboard port and PS/2 mouse ports • Standard PC speaker port with .1 watt output drive REAL TIME CLOCK • Battery-backed real-time clock and CMOS RAM BIOS • Award ROM-BIOS with Ampro embedded-PC enhancements ADDITIONAL ONBOARD FUNCTIONS SERIAL • Two 16-byte FIFO-buffered serial ports (16550-equivalent) • Both ports are RS-232 or RS-422/485 for half or full-duplex configuration PARALLEL • IEEE-1284 (EPP/ECP) compliant, bi-directional FLOPPY • Supports 1 or 2 drives FAST IDE • PCI Extended IDE/UltraDMA drive controller • Supports up to two hard disk drives and one CompactFlash Socket • Supports high-speed PIO modes with fast ATA-compatible interface • Type II CompactFlash socket • Ampro BIOS supports large capacity disk drives through Logical Block Addressing (LBA) CONFIG EEPROM • 512 bits available for OEM use WATCHDOG TIMER • Utilizes real time clock alarm function • Timeout triggers 5MI or hardware reset POWERFAIL NMI • Triggers when +5V power drops below +4.7V PCI BUS DISPLAY CONTROLLER CONTROLLER • Uses state-of-the-art Trident Cyber9525DVD Multimedia Accelerator ONBOARD DISPLAY RAM • 2.5 MB embedded SDRAM FLAT PANEL SUPPORT • Supports CRT, LCD, and video displays • Supports true color at 800 x 600 VGA resolution • Supports interlaced/non-interlaced displays in up to 1280x1024 resolution modes • GUI accelerator for enhanced graphic function performance • Standard model supports 3.3V flat panels; support for 5V flat panels with external adapter. ETHERNET LAN INTERFACE CONTROLLER • Intel 82559ER 10/100Mbps Ethernet controller • Complies with IEEE-802.3 (ANSI 8802-3) MII • 32-bit PCI host for fast operation up to 33MHz PCI clock frequency TOPOLOGY • Ethernet bus, using CSMA/CD MEDIA INTERFACE OPTIONS • 10/100Base-T (twisted pair), via on-board RJ-45 connector DATA RATE • Automatic arbitration for 10/100 Mbits/sec MECHANICAL SIZE • 5.75 x 8.0 in. (146 x 203 mm) POWER • Power requirements (typical, with 16MB DRAM, measured at 5V +/- 5%) ENVIRONMENTAL • 0° to 70° C standard temperature, –55° C to +85° C storage temperature • –40° to +85° C extended operating temperature available by special order • 5% to 95% relative humidity, non-condensing • Weight: 11.6 oz. (329 gm), no DRAM installed NOTICE: The product specifications provided in this data sheet are subject to change without notice. © 2000 Ampro Computers, Inc. All rights reserved. AMPRO is a registered trademark and CoreModule, MiniModule, Little Board, and Encore are trademarks of Ampro Computers, Inc. All other trademarks and registered trademarks are the property of their respective owners. Ampro Headquarters: 1 (800)966-5200 • www.ampro.com
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the LB3-P5V have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

Ampro LB3-486-Q-93 CPU Board - Little Board 486i EBX Single Board Computer - AMD 486DX4/DX5 66 or 10...

Ampro LB3-486-Q-93 CPU Board. Little Board 486i EBX Single Board Computer | AMD 486DX4/DX5 66 or 100...

Ampro LB3-486-Q-97 CPU Board-Little Board/486i AMD 486DX/DX5, 66 or 100/133MHZ with SDRAM, VGA CRT/L...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods