Media Converting Switches FS210 Series, Wall-mounted Speed/Media Converting Switches AT-FS211-xx 2 port Fast Ethernet switch, 10/100TX to 100FX (ST) AT-FS212/y-xx 2 port Fast Ethernet switch, 10/100TX to 100FX (SC) AT-FS214-xx 2 port Fast Ethernet switch, 10/100TX to 100FX (MT-RJ) Fibre-To-The-Home (FTTH) Simple to install Installing these switches couldn’t be easier. FTTH networks provide broadband services to Secure the metal backing plate to the wall Key features home users through a fiber-optic using two screws. Slide the switch into position infrastructure. In the home, users require • Converts speed as well as media type onto the backing plate and anchor it with two simple-to-install copper cables to transport more screws. Connect the fibre cable into one Ethernet and Fast Ethernet among their • Compact physical size connector. Connect the power and copper computers, set-top boxes, Internet telephones, cable into the other. The unit is ready to use. • Copper interface auto-senses MDI/MDI-X and other devices.The FS210 series of wall- An integral cable tie bracket is included for the mounted access switches provide the inter- • 4,000 MAC address tables power supply to elimi-nate inadvertent connection needed between fiber-optic and disconnection, thus minimising potential • Transparent to IEEE 802.1Q packets copper cables. Because broadband service problems with the network. suppliers use a variety of fiber-optic • Support for multi-mode and single-mode connectors, Allied Telesyn created a wide-range fibre of wall-mounted switches to ensure Universal connection compatibility with any provider. The wall-mounted access switches support both 10Mbps Ethernet and 100Mbps Fast Ethernet in either half or full-duplex modes. Auto-negotiating to either speed guarantees compatibility with all user connected equipment. Users can also connect multiple PCs to access the broadband network via a hub or switch connected directly to the wall- mounted access switch. FS210 Series,Wall-mounted Speed/Media Converting Switches STATUS INDICATORS FIBRE-OPTIC INTERFACE - ORDERING INFORMATION Fibre Interface Link/Activity LED MULTI-MODE No light - no link Min. Typical Max. AT-FS211-xx Steady Green - link but no traffic Transmitter Wavelength 1310nm 2 port Fast Ethernet switch, Flashing Green - link and activity Output power 10/100TX to 100FX (ST) (62.5/125uM) -19dB -16.8dB -14dB Copper Interface Link/Activity LED Receiver Wavelength 1310nm No light - no link AT-FS212/y-xx Sensitivity -31.8dB -34.5dB -14dB Steady Green - link but no traffic (Saturation) 2 port Fast Ethernet switch, Flashing Green - link and activity 10/100TX to 100FX (SC) FIBRE-OPTIC INTERFACE - Speed 10/100Mbps SINGLE-MODE (AT-FS212 FAMILY) Off - 10Mbps copper link AT-FS214-xx 100FX single-mode (15km) Min. Typical Max. Green - 100Mbps copper link 2 port Fast Ethernet switch, Transmitter Wavelength 1310nm Output power OPERATIONAL CHARACTERISTICS 10/100TX to 100FX (MT-RJ) (9/125uM) -15dB -11.5dB -8dB Fibre Interface: Receiver Wavelength 1310nm The fibre interface is set to full-duplex operation and Where y = Multi-mode fibre Sensitivity -31dB -31dB -8dB cannot be changed = 1 single-mode fibre 15km (Saturation) Copper Interface: Where xx = 10 for U.S. power adapter POWER CHARACTERISTICS The copper interface is equipped with auto-negotiation Input Voltage: = 20 for European power adapter for speed and duplex. It also auto-senses MDI/MDI-X External Power Supply 120V AC 60Hz/ = 30 for U.K. power adapter MAC Address Table 4,000 addresses 240V AC 50Hz = 40 for Australian power adapter Input Supply Voltage 3.3vDC +/- 5% Forwarding/Filtering Rate Max Current 1.5A 148,880pps for 100Mbps 14,880pps for 10Mbps ENVIRONMENTAL SPECIFICATIONS Operating Temp. 0°C to 50°C Latency 14.3µsec (64 byte packet, 100Mbps full- Storage Temp. -20°C to 80°C duplex) Relative Humidity 5% to 80% non-condensing PHYSICAL CHARACTERISTICS Dimensions 2.2cm x 7cm x 9cm (.87" x 2.76" x 3.54") Weight 294g (10.4oz) ELECTRICAL/MECHANICAL APPROVALS Safety UL-Cul,CE-B compliant EMC FCC Class B WARRANTY Limited lifetime (1 year on PSU) | | | | | European Headquarters Via Motta 24 6830 Chiasso Switzerland T: +41 91 69769.00 F: +41 91 69769.11 www.alliedtelesyn.com © 2004 Allied Telesyn International Corp. All rights reserved. Information in this document is subject to change without notice. All company names, logos and product designs that are trademarks or registered trademarks are the property of their respective owners. Part Number 617-00395-05 Rev. D