Datasheet | Network Interface Cards (NIC) AT-2701FX/FTX & AT-2746FX Fast Ethernet Fiber Network Interface Cards (NIC) AT-2701FX/AA-xxx Allied Telesyn’s Card Key Features 100Mpbs Fast Ethernet fiber Assistant Software • PCI 2.2 compliant Network Interface Card (NIC) Allied Telesyn’s AT-2701FX/FTX and AT-2746FX • Wake on LAN (WoL) feature a full-line of card assistant software: • Secured transmissions AT-2701FTX/AA-xxx • AT-Setup reduces Window Driver installation to 100Mpbs Fast Ethernet dual fiber • Advanced installation utility a mouse click.This Windows program guides and copper NIC users through driver installation, updates, and • Advanced diagnostics problem corrections. • PXE 2.0 support with BootROM pre-installed AT-2746FX/AA-xxx • AT-Stat is an advanced Windows application • TCP/IP checksum off-loading 100Mpbs Fast Ethernet that reports network conditions and 10Mbps dual port fiber NIC • VLAN support performance such as hardware resources, - Link Aggregation network statistics, and configuration. - Load-Balancing and Auto Fail-over Choice & Flexibility • The VLAN protocol driver allows network Allied Telesyn’s AT-2701FX/FTX and AT-2746FX • Traffic prioritization administrators to configure their VLAN network are the answers for those fiber adapters that • Low-profile option fabric at the PC instead of the switch, enabling support Wake on LAN (WOL) for either PCI • 1MB FIFO transparent movement of systems between 2.1 or PCI 2.2 systems but not both. Allied switches. • Driver support for popular operating systems Telesyn’s NICs support WOL through the PCI including Sun Solaris 2.2 bus and support PCI 2.1 WOL via external • TCP/IP Checksum off-loading improves CPU cables. Resistant to signal degradation, snooping, • Available with SC, ST, MT-RJ, or VF-45 use by verifying TCP/IP traffic checksums at the connections and interference, the AT-2701FX/FTX and AT- adapter rather than at the host processor, 2746FX are ideal solutions for networks • Compliant with the Trade Agreement Act improving overall system performance for requiring protection from electrical interference slower PCs. • Lifetime warranty and hackers.The small footprint—together with • Packet prioritization enables Windows the low-profile option of the AT-2701FX/FTX— applications with Class of Service capabilities to make these products a perfect choice for PCs prioritize out-bound packet streams to these equipped with small desktop NICs, a useful feature for video streaming and solutions. VoIP where interruptions are unacceptable.The AT-2701FX/FTX’s and AT-2746FX’s onboard Managed Boot Agent (MBA) provides a wide set of industry-standard boot protocols, including PXE, NetWare NCP/IPX, IBM’s RPL, traditional DHCP, and BOOTP, supporting both BBS (BIOS Boot Specification) and non-BBS compliant PCs. It also includes an extensive set of utilities for boot ROM configuration, as well as access to Pre-OS and network boot image files. Offering a wide range of connector choices—ST, SC, MT -RJ, or VF-45—these cards meet the requirements of most fiber installations. Products shown above (left to right): AT-2701FX/SC, AT-2701FTX/SC, and AT-2746FX/ST/ST Allied Telesyn www.alliedtelesyn.com | Network Interface Cards (NIC) AT-2701FX/FTX & AT-2746FX Status Indicators 10FL Ordering Information AT-2701FX Connectors ST,SC 2 LEDs to indicate: Fiber type Multi-mode fiber AT-2701FX/AA-xxx Link/ACT On for Link Output Power Minimum: -18.8dB 100Mpbs Fast Ethernet fiber Blink for Activity Typical: -15.8dBm Network Interface Card (NIC) FDX On for Full-Duplex Maximum: -13.8dB Off for Half-Duplex Receive Sens. Maximum: -7.6dB AT-2701FTX/AA-xxx 100Mpbs Fast Ethernet dual fiber and copper NIC AT-2701FTX/2746FX Selection Guide 2 LEDs to indicate: 100FX 10/100TX 10FL AT-2746FX/AA-xxx 10Mbps On for Link AT-2701FX X - - 100Mpbs Fast Ethernet Blink for Activity AT-2701FTX X X - 10Mbps dual port fiber NIC Green for Full-Duplex AT-2746FX X - X Yellow for Half-Duplex Where AA = ST, SC, MT-RJ, or VF-45 100Mbps On for Link Power Characteristics (for AT-2701FX/FTX) Blink for Activity 1A at 5v SC/SC or ST/SC or ST/ST Green for Full-Duplex (for AT-2746FX) Yellow for Half-Duplex Environmental Characteristics Operating Temp. 0°C to 50°C Where XXX = 001 for single unit PC Bus Interface Operating Humidity: 5% to 80% non-condensing 020 for 20-unit pack Bus Interface PCI 2.2 Compliant Storage Humidity: 5% to 95% non-condensing Bus Width 32-bit 901 for single unit, Data Transfer Mode PCI 2.2 Bus Mastering Physical Characteristics Compliant with Trade Agreements Act Power Management Interface AT-2701FX/FTX 920 for 20-unit pack, ACPI Depth 17.5cm (6.9") Compliant with Trade Agreements Act Height 6.5cm (2.6") Driver Support Netware 4.2, 5, and 6 AT-2746FX Windows 95, 98, ME, XP, NT4, 2000, and 2003 Depth 17.7cm (7") Linux 2.2, 2.4 Height 8.3cm (3.3") 100Mbps Fiber Interface Standards and Compliance Connectors ST, SC, MT-RJ, or VF-45 IEEE 802.3u 100FX Fiber type Multi-mode fiber IEEE 802.3u 100TX Output Power Minimum: -19dB IEEE 802.3j 10FL Typical: -16.8dBm 802.1Q/P Maximum: -14dB Receive Sens. Maximum: -31dB Electrical/Mechanical Approvals FCC/EN55022 class B UTP Interface UL Connector Shielded RJ-45, MDI TUV EN55024 CE USA Headquarters | 19800 North Creek Parkway | Suite 200 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895 European Headquarters | Via Motta 24 | 6830 Chiasso | Switzerland | T: +41 91 69769.00 | F: +41 91 69769.11 Asia-Pacific Headquarters | 11 Tai Seng Link | Singapore | 534182 | T: +65 6383 3832 | F: +65 6383 3830 www.alliedtelesyn.com © 2005 Allied Telesyn Inc.All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners. 617-000031 Rev.I