AKCP TMP01
Features
- Available in 1 foot, 15 feet, 60 feet and 100 feet sizes
- Available in a fixed or custom length water resistant version.
- Full autosense including disconnect alarm
- RJ-45 connection for easy and Simple installation
Datasheet
AKCP-TMPXX Series-Temperature Sensor-image1-469919304.pdf
608 KiB
Extracted Text
Sensor Control...
Access Control...
In some cases they can be extended up to 1,000 feet (only the TMP00 and THS00 remote type should be
extended). The sensorProbe auto detects the presence of the temperature sensor once plugged into the
RJ-45 port. A built in graph option is included on all sensorProbes for graphing temperature variations over
Temperature Sensor - TMPXX
a period of time.
Each temperature sensor has its own SNMP OID so that the data can be
collected over network and graphed using external application like MRTG.
The temperature sensor can be read using included SNMP utilities to allow
graphing and data logging at 0.5°C resolution. We also sell a Water resistant
version of our Temperature Sensor Water resistant Product Code : TMPW15
Temperature Sensor
The AKCP Temperature sensors are of the All temperature sensors come with an RJ-45
semiconductor, microprocessor controlled type, male connector and can be easily plugged in
designed to record accurate temperature data. It is to the RJ-45 jacks on the sensorProbe.
compatible with all AKCP sensorProbes.
Specially designed CAT 5 cable assures a
You can plug in up to 2 temperature sensors on the correct reading up to 100 feet, and is
sensorProbe2 and up to 8 on sensorProbe8, available in standard length of 1 foot, 15
sensorProbe8-X20 / X60. You can connect up to 8 on feet, 60 feet and 100 feet, allowing the
the securityProbe main unit and 8 more on each sensors to be positioned in hot spots. These
E-sensor8 expansion module. temperature sensors can be extended
beyond their standard length.
Temperature Sensor - TMPXX
Sensor Control...
Access Control...
In some cases they can be extended up to 1,000 feet (only the TMP00 and THS00 remote type should be
extended). The sensorProbe auto detects the presence of the temperature sensor once plugged into the
RJ-45 port. A built in graph option is included on all sensorProbes for graphing temperature variations over
a period of time.
Each temperature sensor has its own SNMP OID so that the data can be
collected over network and graphed using external application like MRTG.
The temperature sensor can be read using included SNMP utilities to allow
graphing and data logging at 0.5°C resolution. We also sell a Water resistant
version of our Temperature Sensor Water resistant Product Code : TMPW15
Temperature Sensor’s Main Features
• Available in 1 foot, 15 feet, 60 feet and 100
extension Cables, CABXX, or you can
feet sizes
provide your own cable of any length up to
• RJ-45 connection for easy and Simple
1000 feet.
installation
• Available in a fixed or custom length water
• Full autosense including disconnect alarm
resistant version.
• TMP00 can be extended to your desired
cable length using one of our CAT5
Calibration & Accuracy Information
Some industries require a certicate showing the temperature sensors are calibrated. The sensors have quite
a high accuracy. The sensors are calibrated by the supplier. In general they do not need much calibration.
The AKCP Temperature sensors are of the All temperature sensors come with an RJ-45
semiconductor, microprocessor controlled type, male connector and can be easily plugged in
However, you may nd that there is a deviation of possibly ±1°C for temperature and ±2%/±3% for humidity
designed to record accurate temperature data. It is to the RJ-45 jacks on the sensorProbe.
on the sensorProbe unit.
compatible with all AKCP sensorProbes.
Specially designed CAT 5 cable assures a
In this case you can o-set the deviation through the systems web interface using the “Reading Oset”
You can plug in up to 2 temperature sensors on the correct reading up to 100 feet, and is
feature to adjust the reading by your oset amount. Please see the product manual for more information on
sensorProbe2 and up to 8 on sensorProbe8, available in standard length of 1 foot, 15
the reading oset feature.
sensorProbe8-X20 / X60. You can connect up to 8 on feet, 60 feet and 100 feet, allowing the
the securityProbe main unit and 8 more on each sensors to be positioned in hot spots. These
We also have the sensor calibration certicate from our sensor electronics supplier that we can provide you
E-sensor8 expansion module. temperature sensors can be extended
with. Just email support if you would like us to send you this document.
beyond their standard length.
Temperature Sensor - TMPXX
Sensor Control...
Access Control...
Technical Specifications
Never needs Calibration
Measurement range Celsius : -55°C to +75°C
Measurement resolution Celsius : 1°C for the sensorProbes and 0.5°C for the securityProbe units.
Measurement accuracy Celsius : ±0.5°C accuracy from -10°C to +75°C
Measurement Range Fahrenheit : -67°F to +167°F
Measurement Resolution Fahrenheit : 1°F for the sensorProbes and 0.9°F for the securityProbe units.
Measurement Accuracy Fahrenheit : ±0.9°F accuracy from +14°F to +167°F
Communications Cable : RJ45 jack to temperature sensor using UTP Cat 5 wire
Sensor Type : semiconductor microprocessor controlled
Power Source: powered by the sensorProbe. No additional power needed.
Power Consumption : Typical 10.70 mWatt, 2.14mA
sensorProbe autodetects the presence of the temperature sensor
Measurement Rate : one reading every second
Up to 2 temperature sensors per sensorProbe2, 8 per sensorProbe8.
You can connect up to 8 on the securityProbe main unit and 8 more on each E-sensor8 expansion module.
Temperature Description OID : .1.3.6.1.4.1.3854.1.2.2.1.16.1.1.
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the TMP01 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods