Sensor Control... Access Control... 1,000 feet (only the THS00 remote type should be extended). When the dual sensor is plugged into the RJ-45 port, the sensorProbe will auto detect the sensor, and it will Temperature & Humidity Sensor - THS00 display Temperature & Humidity for each RJ-45 port. A built in graph option is included on all sensorProbes for graphing temperature and humidity variations over a period of time. Each Temperature \ Humidity Sensor has its own SNMP OID so that the data can be collected over network and graphed using external application like MRTG. The Temperature \ Humidity Sensor can be read using included SNMP utilities to allow graphing and data logging at 0.2°C resolution. We also sell a Water resistant version of our Temperature \ Humidity Sensor Water resistant Product Code : THSW15 Temperature & Humidity Sensor The AKCP single port dual Temperature & Humidity You can connect up to 8 on the Sensors has both temperature and humidity securityProbe main unit and 8 more on each measuring capabilities in a single sensor. This E-sensor8 expansion module. Specially extends the capability of the sensorProbe to designed CAT 5 cable assures a correct measure up to 8 temperature and 8 humidity sensing reading up to 100 feet, and is available in parameters, just by connecting 8 dual sensor. standard length of 1 foot, 15 feet, 60 feet and 100 feet, allowing the sensors to be Up to 2 dual sensors can be plugged into the RJ-45 positioned in hot spots. These dual sensors jacks on the sensorProbe2 and up to 8 sensors on the can be extended beyond their standard sensorProbe8, sensorProbe8-X20/X60. length. In some cases they can be extended up to Temperature & Humidity Sensor - THS00 Sensor Control... Access Control... 1,000 feet (only the THS00 remote type should be extended). When the dual sensor is plugged into the RJ-45 port, the sensorProbe will auto detect the sensor, and it will display Temperature & Humidity for each RJ-45 port. A built in graph option is included on all sensorProbes for graphing temperature and humidity variations over a period of time. Each Temperature \ Humidity Sensor has its own SNMP OID so that the data can be collected over network and graphed using external application like MRTG. The Temperature \ Humidity Sensor can be read using included SNMP utilities to allow graphing and data logging at 0.2°C resolution. We also sell a Water resistant version of our Temperature \ Humidity Sensor Water resistant Product Code : THSW15 Temperature & Humidity Sensor’s Main Features • Available in 1 foot, 15 feet, 60 feet and 100 extension (we don’t recommend extending feet sizes the fixed one foot version) cables, CABXX, or • RJ-45 connection for easy and Simple you can provide your own installation cable of any length up to 1000 feet. • Full autosense including disconnect alarm • Available in a fixed or custom length water • THS00 can be extended to your desired resistant version. cable length using one of our CAT5 Calibration & Accuracy Information Some industries require a certicate showing the temperature/humidity sensors are calibrated. The sensors The AKCP single port dual Temperature & Humidity You can connect up to 8 on the have quite a high accuracy. The sensors are calibrated by the supplier. In general they do not need much Sensors has both temperature and humidity securityProbe main unit and 8 more on each calibration. However, you may nd that there is a deviation of possibly ±1°C for temperature and ±2%/±3% measuring capabilities in a single sensor. This E-sensor8 expansion module. Specially for humidity on the sensorProbe unit. extends the capability of the sensorProbe to designed CAT 5 cable assures a correct measure up to 8 temperature and 8 humidity sensing reading up to 100 feet, and is available in In this case you can o-set the deviation through the systems web interface using the “Reading Oset” parameters, just by connecting 8 dual sensor. standard length of 1 foot, 15 feet, 60 feet feature to adjust the reading by your oset amount. Please see the product manual for more information on and 100 feet, allowing the sensors to be the reading oset feature. Up to 2 dual sensors can be plugged into the RJ-45 positioned in hot spots. These dual sensors jacks on the sensorProbe2 and up to 8 sensors on the can be extended beyond their standard We also have the sensor calibration certicate from our sensor electronics supplier that we can provide you sensorProbe8, sensorProbe8-X20/X60. length. with. Just email support if you would like us to send you this document. In some cases they can be extended up to Temperature & Humidity Sensor - THS00 Sensor Control... Access Control... Technical Specifications Temperature Never needs Calibration Measurement range Celsius : -40°C to +75°C Measurement resolution Celsius : 1°C for the sensorProbe and 0.1°C for the securityProbe units. Measurement accuracy Celsius : Maximum ±2.3 at -40ºC, minimum ±0.4 at +25ºC and ±1.7 at +75ºC Measurement range Fahrenheit : -40°F to +167°F Measurement resolution Fahrenheit : 1°F for the sensorProbe and 0.1°C for the securityProbe units. Measurement accuracy Fahrenheit : Maximum ±4.1 at -40ºF, minimum ±0.9 at +25ºC and ±4 at +167ºF Communications Cable : RJ45 jack to temperature sensor using UTP Cat 5 wire Sensor Type : semiconductor microprocessor controlled Power Source : powered by the sensorProbe. No additional power needed. Power Consumption : Typical 10.70 mWatt, 2.14mA sensorProbe autodetects the presence of the temperature sensor Measurement Rate : one reading every second Up to 2 temperature sensors per sensorProbe2, 8 per sensorProbe8. You can connect up to 8 on the securityProbe main unit and 8 more on each E-sensor8 expansion module. OID temperature sensorProbeTempDegree = 1.3.6.1.4.1.3854.1.2.2.1.16.1.3.X OID temperature sensorProbeTempStatus = 1.3.6.1.4.1.3854.1.2.2.1.16.1.4.X OID humidity sensorProbeHumidityPercent = 1.3.6.1.4.1.3854.1.2.2.1.17.1.3.X OID humidity sensorProbeHumidityStatus = 1.3.6.1.4.1.3854.1.2.2.1.17.1.4.X Humidity Measurement range : 0 to 100% Relative humidity Resolution : 1% for the sensorProbes and 0.1% for the securityProbe units. Accuracy : 25°C ±3% Communications Cable : UTP Cat 5 cable Powered by the sensorProbe. No additional power needed Power Consumption : Typical 7.25 mWatt, 1.45mA Sensor element wettable without damage sensorProbe auto detects the presence of the dual sensor Up to 2 dual sensors per sensorProbe2, 8 per sensorProbe8, securityProbe and E-sensor8 module Temperature & Humidity Sensor - THS00